In the words of the donor, Betty Stone, "This fitted writing slope box belonged to Ellis Dale of “Latrigg”, Wangoom, Warrnambool, and has an inscription “E. Dale”, hand written by Ellis on a small brass plaque featured on the lid. Ellis Dale, born 21 November 1860, was the second son of William and Elizabeth Dale, of Dale Bluestone Quarries Wangoom. He worked with his father at the quarries, and continued, after his father's death, to operate the family business with his son lvor until he died, aged 79 years, on 2 August 1940. Although the tradition was that the writing box was originally owned by Ellis's father, William Dale, there is some doubt that he brought it with him from England when he migrated in 1852 - however, we do know that it is at least one hundred years old. (Note: For additional information please refer to my book “Pioneers and Places - A History of three Warrnambool Pioneering Families” ie. Chamberlain, Dale and Lees Families)This item is associated with the Warrnambool pioneer families of Chamberlain, Dale and Lees. These families are listed in the Pioneers' Register for Warrnambool Township and Shire, 1835-1900, published by A.I.G.S. Warrnambool Branch. The item is significant for its association with a ‘glory box’ or hope chest’, a tradition of single ladies making and collecting a range of linen and other domestic items in preparation for their future marriage.Polished wooden Writing Slope or Travellers Desk. Owned by Ellis Dale. Box opens to be a sloped writing desk, with a leather writing surface decorated with a gold leaf border, and several compartments; one has a slightly concaved cover that pivots to open. Leather-covered boards hinge at the centre, and both sides lift, revealing further storage. Brass protectors on top corners, inlaid brass strengthening supports on two corners. Brass slide-releasing catches secure writing base as desk closes. The brass shield centre of the lid is engraved. Part of the 'Chamberlain Dale Lees Collection.Engraved shield on lid "E.Dale / Wangoom"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, chamberlain, dale, lees, stone, betty stone, warrnambool pioneers, writing slope, writing box, traveller's desk, portable desk, lap desk, ellis dale

Frank Wright was a renown resident of Smeaton, where he was born in 1901. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. He was the youngest of eleven children. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was appointed in 1934 as the Musical Director of the London County Council (the GLC or Greater London Council), where he organized many amazing concerts in most of the 150 parks, in and around the London district. He was also responsible for some of London’s major concerts at Kenwood, the Crystal Palace and Holland Park. He was made Professor of Brass and Military Band Scoring and Conducting and was a Fellow of the Guildhall School of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. Frank was awarded an M.B.E. in 1967 and he died in November 1970. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia.This 36 page book bound in red leather with gold printing is the score of the National Brass Band Championships of Great Britain 1968, Champion Section Test Piece, Prelude, "The Mastersingers" Composed by Wagner, arranged by Frank Wright. Written in pen on the inside front page - To Frank, With most grateful thanks and warmest regards. Vaughan 12th October 1968frank wright, wagner, the mastersingers, national brass band championships of great britain, brass bands

This disc belonged to Frank Wright. The letters ENSA refer to the Entertainments National Service Association, which was set up in 1939 to provide entertainment for the British armed forces personnel. Frank Wright was a renown resident of Smeaton, where he was born in 1901. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. He was the youngest of eleven children. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was appointed in 1934 as the Musical Director of the London County Council (the GLC or Greater London Council), where he organized many amazing concerts in most of the 150 parks, in and around the London district. He was also responsible for some of London’s major concerts at Kenwood, the Crystal Palace and Holland Park. He was made Professor of Brass and Military Band Scoring and Conducting and was a Fellow of the Guildhall School of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. Frank was awarded an M.B.E. in 1967 and he died in November 1970. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia.This red coloured 3.5 cm leather disc has been stamped with the letters ENSA Frank Wright CE. It has a hole pinched in the top, through which a string has been threaded.frank wright, armed forces entertainment, musician conductor, brass bands, ensa, entertainments national service association

The Display Board of Konts was handmade in Kings Lynn, Devon, England, by Tom Long DSM, who is a member of the International Guild of Knot Tyers. This display board shows the knots and joins used in ropework performed by a sailmaker and other skilled ropeworkers. It demonstrates the uses of some of the knots, such as for knobs and handles, suspending lengths of wood, reinforcing spliced rope and even for decorative work. The sailmakers travelling as part of the ship’s crew stored their tool kit in a canvas ditty bag. It contained needles, awls, a sailmaker’s leather palmed glove with a heavily reinforced palm - a shuttle to mend and make nets, fids, knives, mallets, brushes, rulers, and rope gauges. Sailmakers used their ropework and knot-making skills for various purposes and chose the type of rope fibre for its particular properties. For example, Italian hemp rope was preferred for the light line used in shore-to-ship rescues because it was lightweight, not easily knotted, and absorbed less water. A supply of various types of rope was a commodity on board a ship and on land in the new colonies. It was flexible, easily stored, and could be worked to create an endless variety of objects on its own or with other materials like wood. An example is a simple rope ladder. Lengths could be combined to make various thicknesses and pieces could be skilfully joined together by splicing. The importance of knots in seafaring cannot be overestimated. When ships relied on only the wind for power and speed, there were a huge number of various ropes in use, particularly with regard to the sails and rigging. Seafarers would be judged on their ability to tie knots speedily and correctly. A mounted display of authentic seaman's knots is on a board covered in blue fabric. Various rope grades and fibres were used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. A selection of rope grades and fibres were used to work numerous knots and splices. Some of the uses are familiar, such as the toggle, the pineapple knot, and the Turk’s head. The name or purpose of the knot is on the label below it. Labels below each knot give its name or use.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, knot display, knot making, ropework, marine technology, sailmaker's work, sailor's knots, ship's rigging, seamen's knots, handmade, rope craft, knots, splices

The inscription "T L" on these early 20th century ladies button-up boots lead to the maker likely to be Tony Lama, a famous USA boot manufacturer, son of Italian immigrants. The "Rome" is the style of boot. The "6" is likely to be the soot size. Tony Lama began work at age 11 years in the leather trade industry, serving an apprenticeship as a shoemaker. He joined the US Cavalry when he was 16, after lying about his age, working as a cobbler to make boots for the soldiers. His workmanship became popular, particularly for the 'Western' style of boot. TONY LAMA boots In 1911 Lama established a company in Texas, first repairing boots, then adapting his shop to manufacture boots in order to meet the many orders he was receiving. He married and he and his wife Esther brought up six children who also went on to work in the family business. The business continued to grow through WWII. Part of the business included custom boot making and Tony's eldest son Joseph presented President Truman with a pair of kangaroo skin boots. The prosperous business became a company and eventually, in 1990, was sold to Justin Industries.This pair of boots is an example of women's footwear dating around the early 20th century. Pair of ladies leather button-up boots. Two-tone style: black bottom strong leather bottom and white, soft kid leather top. Boots have a curved fly fastened by 11 white buttons with metal shanks. Boots are constructed with cork filling. Inscriptions of both boots. "6 101" "TL" " Rome" "Cork Filled"flagstaff hill, warrnambool, maritime-museum, shipwreck-coast, flagstaff hill maritime museum & village, ladies button up boots, footwear, victorian era, granny boots, tony lama, ladie's boots, ladies' fashion, women's clothing, rome, kid leather, two-tone boots, leather boots, button-up boots

he subject item is a pedal-powered rip saw with a tilting table made in the USA by W.F. & John Barnes Co. of Rockford, Illinois, between 1874 and 1890. The saw's blade moves rapidly in a circular motion and is driven by a pedal that spins a heavy flywheel with a leather belt attached to a gear drive that in turn drives the circular saw blade. The operator holds a wood workpiece on the table and moves it forward so the blade cuts it to the desired width and length. Company History: WF & John Barnes Co. was established in 1869, by making a formal partnership between William F. Barnes and John Barnes in 1872, and then incorporating in 1884. This company was an early manufacturer of pedal-powered equipment. By 1881 they were also making powered machinery such as lathes and pedestal drills. Many companies were making lightweight foot-powered equipment, but Barnes and the Seneca Falls Co. were the only ones to also make professional-grade workshop machines. From the beginning of their existence, they focused on pedal-powered machinery and specialised in making scroll saws. By 1937 the company focus had completely shifted to automotive assembly machinery, and custom-built machinery, machine tools, electrical, hydraulic, and mechanical controls and systems, including nuclear hardware. their production of foot-powered machinery had ceased. In the intervening years, they have got out of manufacturing completely. After a series of ownership changes, their equipment parts and stock were purchased in 1998 by LeBlond Ltd. of Amelia, Ohio. An item that although incomplete gives a snapshot into the manufacture and use of early woodworking machinery before the introduction of electricity or electric motors to power machines.A Treadle powered tilting table saw benchWF & J Barnes, Rockford Ill USA flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Used at the Ballarat School of Mines and the Ballarat Technical Art SchoolThis collection of examinations is significant because of its completeness with the full range of examinations between 1914 and 1950.Large leather bound books, with leather spine, containing all examinations held at the Ballarat School of Mines (including the Ballarat Technical Art School and Ballarat Junior Technical School). The examination papers were supplied and printed by the Education Department, Victoria. Examinations include: Agriculture, Algebra, Architecture, Arithmetic, Applied Mechanics, Assaying, Biology, Botany, Boilermaking, Building Design, Blacksmithing, Bricklaying, Carpentry and Joinery, Coachbuilding, Cabinet Making, Civil Engineering, Cabinet Making, Commercial, Chemistry, Engineering Drawing, Economics, English, Electrical technology, Electricity and Magnetism, Electric Wiring, Electric Welding, Electrical Fitting, Electrical Trades, Food Analysis, Geology, Geological Mapping, Graphics, Geometry, Heat Engines, Heat Treatment, Hydraulics, Hand Railing, Instrument Making, Millinery, Milling and Gearouting, Machine Shop Practice. Metal Founding, Mining, Metallurgy, Mineralogy, Mathematics, Motor Mechanics, Mine Surveying, Mining Mechanics, Petrology, Physics, Painting and Decorating, Pattern Making, Plastering, Plumbing and Gasfitting, Printing, Refrigeration, Spelling, Science , Shorthand, Surveying. Signwriting. Sheet Metalwork, Toolmaking, Ladies Tailoring, Trigonometry, Typewriting, Welding, Commercial Geography. Millinery, Dressmaking, Needlework, Decorative Needlework, Architecture, Building Design and Construction, Art (Composition in Form and Colour), Art (Casting Clay MOdels) Art (Drapery), Art (Drawing the Human Figure From Casts), Art (Drawing the Antique from Memory), Art (Drawing from Memory); Art (Drawing Plant Forms from Nature, Art (Drawing Plant Forms From Memory), Art (Drawing from Models and Objects), (Drawing From a Flat Example). Art (Drawing in Light and Shade from a Cast of Ornament or Lower Nature), Art (Drawing Ornament from the Cast), Art (Drawing from Models or Objects), Art (Drawing fro Dressmakers' and Milliners' Fashions), Art (Drawing With the Brush), Art (Drawing from a Flat Example); Art (Modelled Design), Art (General Design), Art (Embossed Leatherwork), Art (Practical Plane Geometry), Art (Practical Solid Geometry), Art (Geometrical Drawing), Carpentry and Joinery, Art (Human Anatomy), Art (Historic Ornament), Art (House Decoration), Art (LEttering), Signwriting, Art (Light Metalwork), Art (Modelling), Art (Modelling the Human Figure from a Life), Art (Stencilling); Art (Wood Carving) Refrigeration, Teaching, Boilermaking, Blacksmithing, Carpentry and Joinery, Coachbuilding and Carriage Drafting, Electric Wiring, Electrical Fitting, Graining and Marbling, Instrument Making , Machine Shop Practice, Metal Founding, Milling and Gear Cutting, Motor Mechanics, Painting and Decorating, Sheet Metalwork, Toolmaking, Printing, Pattern Making, Plumbing and gasfitting, examinations, ballarat school of mines, ballarat technical art school, trades, education department victoria, agriculture, algebra, architecture, arithmetic, applied mechanics, assaying, biology, botany, boilermaking, building design, blacksmithing, bricklaying, carpentry and joinery, coachbuilding, cabinet making, civil engineering, commercial, chemistry, engineering drawing, economics, english, electrical technology, electricity and magnetism, electric wiring, electric welding, electrical fitting, electrical trades, food analysis, geology, geological mapping, graphics, geometry, heat engines, heat treatment, hydraulics, hand railing, instrument making, millinery, milling and gearouting, machine shop practice, metal founding, mining, metallurgy, mineralogy, mathematics, motor mechanics, mine surveying, mining mechanics, petrology, physics, painting and decorating, pattern making, plastering, plumbing and gasfitting, printing, refrigeration, spelling, science, shorthand, surveying, signwriting, sheet metalwork, toolmaking, ladies tailoring, trigonometry, typewriting, welding., dressmaking, needlework, decorative needlework, architecture, building design and construction, art (composition in form and colour), art (casting clay models), art (drapery), art (drawing the human figure from casts), art (drawing the antique from memory), art (drawing from memory), art (drawing plant forms from nature, art (drawing plant forms from memory), art (drawing from models and objects), (drawing from a flat example), art (drawing in light and shade from a cast of ornament or lower nature), art (drawing ornament from the cast), art (drawing from models or objects), art (drawing for dressmakers' and milliners' fashions), art (drawing with the brush), art (drawing from a flat example), art (modelled design), art (general design), art (embossed leatherwork), art (practical plane geometry), art (practical solid geometry), art (geometrical drawing), art (human anatomy), art (historic ornament), art (house decoration), art (lettering), art (light metalwork), art (modelling), art (modelling the human figure from a life, art (stencilling), art (wood carving), teaching, coachbuilding and carriage drafting, graining and marbling, milling and gear cutting, commercial geography, exams, examination book

The concertina was owned by Simon McDonald. He gave the concertina to Myrtle Porter in exchanged for town water. Simon McDonald lived in Melbourne Rd., Creswick.Simon McDonald (1906 - 1968) was a noted self taught Australian folk musician whose home was in Creswick. Consider in the industry as the most important.20 Button Anglo Concertina & Case. Hexagon shaped Concertina. Both sides have fretwork and 10 bone buttons making it a 20 plus single button Anglo concertina. The leather straps have at sometime been replaced with white plastic strap. It has 5 bellows in black and white pattern leather. The hexagon wood case is lined, although the lining is showing wear.One side: small disc with Lachenal & Co., Patent Concertina Manufacturers, London. Opposite side: Initials on red card J.W.Gsimon mcdonald, anglo concertina, creswick

Cast iron boot last - used for making shoes and boots and repairing them. The cast iron boot last provides the bootmaker with the ability to place the boot upside down over the last and drive shoe tacks into the leather soles. Where the tack was set well into the leather, hitting the cast iron would cause the tack to bend over, clinching the tack and securing the sole or heel on the boot or shoe;Non visible.boot last (cast iron)

made and used by internees in Camp 3 Tatura during WW2 for making shoes and bootsHand tool used for bootmaking, hook for leatherhook, bootmakers kit, haering, manfred, camp 3, tatura, hand tool, !, trades, bootmaking

Shoe-making began in Australia among the penal colonies in 1790 who crafted shoes from imported leather. The first Australian-made shoes were expensive and many people were sent back to England for their shoes until the 1830s. However, in the years after Australian shoe-making became more accessible and affordable. Toward the end of the 19th Century, many wealthy women became obsessed with the latest fashions for both themselves and their children. Shoe-making became a profitable business for several leading companies during the 20th Century, as the industry was seen as a successful and practical item that most Australians required.The baby shoe holds significance as it represents the craftsmanship of Australian leather shoe-making from the 20th Century. As the style of shoe is more modest and stylish, it can be assumed that it was the type of footwear used for the Church Sunday Service or for special occasions, with further gives insight into the social constructs of Chiltern, a rural town in Victoria, at that time.Black leather with wool pom pom attached with a metal stud. Leather sole is black and the inner of the shoe is cream. Discolouration on the bottom of the shoe due to dirt.chiltern, shoe, footwear, leather shoe, baby shoe, chiltern athenaeum

Shoe-making began in Australia among the penal colonies in 1790 who crafted shoes from imported leather. The first Australian-made shoes were expensive and many people were sent back to England for their shoes until the 1830s. However, in the years after Australian shoe-making became more accessible and affordable. Toward the end of the 19th Century, many wealthy women became obsessed with the latest fashions for both themselves and their children. Shoe-making became a profitable business for several leading companies during the 20th Century, as the industry was seen as a successful and practical item that most Australians required.The baby shoe holds significance as it represents the craftsmanship of Australian leather shoe-making from the 20th Century. As the style of shoe is more modest and stylish, it can be assumed that it was the type of footwear used for the Church Sunday Service or for special occasions, with further gives insight into the social constructs of Chiltern, a rural town in Victoria, at that time.Black leather shoe. Leather sole is black and the inner of the shoe is tan. Discolouration on the shoe due to dirt.chiltern, shoe, footwear, leather shoe, baby shoe, chiltern athenaeum

The name Trireme comes from its distinct three rows of oars/oarsmen. The first tier of rowers were known as the Thranites, translating to Thrones. They were the most prestigious, and worked the hardest because their oars were furthest away from the water and therefore had to work harder. They were usually younger and they were paid one and a half drachma per day, half a drachma more than the other two tiers of rowers who were paid one drachma per day. After a few years working as Thranites, each was moved down into the second tier, the Zygites. Zygites derives from the word balance, as the second tier was balanced in the middle. After more years again, oarsmen were moved down into the third and final tier, known as the Thalamites. The Thalamites were consistently wet due to the proximity of their tier to the water. The water would leak through the gaps where the oars entered the ships despite the leather skins used to close the openings.This is a unique specimen made by D. Paraskevatos, in that it is the only one of its kind in the world that has been built to the exact specifications of the Athenian vessel. It was built in Melbourne and it also has historic and artistic valueWooden replica model ship that is an exact replica of the ancient Athenian trireme making it unique in the world since there's no other such replica made. Great care was exercised to ensure that it will include all functionality and detail of the ancient ship used to by the Athenians to fight in the Sea battle of Salamis and beyond. Mr Denis Paraskevatos constructed the Paralos Trireme over a period of eighteen months. Mr Paraskevatos relayed the history of his Trireme. The first Trireme was constructed in Greece by the shipbuilder Aminoklis in 704BC, originating from Corinth. The first four Triremes he constructed were ordered by a Poliykrates from Samos, thus the ships were known as Samines. Poliykrates realised he would be able to use the Triremes for his own benefit against invading pirates, as well as to engage in activities of piracy himself. The Athenians built 200 Triremes for the battle of Salamis, all constructed over a period of eighteen months. This was a huge feat, on average a new ship was build every second day. Triremes were primarily used in sea battles, however there were two unique Triremes, the Salaminia and the Paralos, which were considered Holy and only used for Ambassadors and Consulates on overseas trips. Mr Paraskevatos’ Trireme is the Paralos. The term Paralos derives from the Greek social class from the shores, or the merchant classes. Greece was divided into three basic social classes. The mountain region, the plateaus or fields bound to agriculture, and those from the shores. Paralia translates to from the shore. The Paralia were an important class in influencing the democracy. They were divergent group who would deliberately vote on the contrary to everyone else. This is how the Trireme was born. Every Trireme held between 20-50 soldiers, and either 170 or 174 oarsmen. Mr Paraskevatos’ Trireme is a 174 oarsmen ship. The role of the oarsmen was difficult and specialised. When engaged in sea battle and the wind was not enough, the navy would remove the masts and leave them on shore and solely use the oarsmen, leaving the deck clear. However when there were sufficient winds and both the sails and oars were in use the oarsmen had to show great skill in manoeuvrability. When the oarsmen were not needed to manoeuvre the ship they also engaged in battle. model, replica, paraskevatos, plutarch, ship, trireme, παρασκευάτος, πανομοιότυπο

Light Horse Troopers carried 80 rounds of ammunition ammunition in pouches on leather sash over shoulder. A further 40 rounds was in pouches on belt and on occasions a second bandolier was slung round horse's neck making a total of 200 rounds.Leather bandolier, light horse pattern. Eight ammunition pouches held 80 x .303 rounds.bandolier, light horse, ammunition

Three generations back in Webb family. Colin Webb from Grass Flat's Great Grandfather's. Used for making flowers and decorate leatherwork.Four wooden dies, turned, with holes in the top of varying sizes. Four matching wooden stcks with round ends of varying sizes.

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of pink leather court shoes with a black insole on which Tony Bianco, the designer’s name is embossed.Tony Bianco / Made in Italyfootwear, women's shoes, court shoes, tony bianco - designer

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of off white leather shoes with rounded toes and a sling-back buckled strap. The shoes have a brown insole on which is embossed in gold print Mescher Paris.Made by M. Faris / All leather solefootwear, women's shoes, mescher of paris

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of black suede evening shoes by Paragon. The brown leather insole is embossed with the name Para[gon].PARAGON 5 Cparagon shoes, women's shoes, footwear

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of leather navy women’s court shoes designed by Andre. The shoes have small leather bows at the front.ANDRE / A / Genuine Leather All leather / Upper & Sole / Leather Lining / Made in Chinawomen's shoes, footwear, andre --shoes

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Schumacher Shoes was a family owned and operated retail show store in Melbourne who sought out the best in comfort, design, and style features. Brands are sourced from around the world, including renowned German, French, Italian; Spanish seasons collections. Made from, including sustainable, quality natural; man made materials.Black leather shoes, with high stilettos heels sling backs with a narrow pointed toe, designed by Schumacher of Collins Street, Melbourne.Schumacher / 296 (sic) Collins Street / Melbourneschumacher, women's shoes, footwear

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of black suede women’s court shoes with a cream leather lining on which is stamped in gold lettering Bruno Magli. The Italian designed shoes were retailed by retailed by M.C. Hermann.BRUNO MAGLI / Made in Italy / Exclusive for M.C. Hermann bruno magli, women's shoes, footwear, italian shoes, m. c. hermann

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of open-toed women’s fashion shoes made of black leather with gold edging. The sling back shoes feature a narrow stiletto heel. The shoes were designed and manufactured by Paragon of MelbourneBelle Chasseur / PARAGON / REMI / Made in Australia Genuine Leather 8B women's shoes, footwear, sandals

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of black leather women’s shoes with black velvet bows, retailed by Rules of LauncestonExclusive to / Rules of Launcestonwomen's shoes, rules of launceston, footwear, court shoes

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of open-toed women’s shoes made of gold coloured leather. The sling back high heel shoes identify Angel Albert as the designer on the brown leather upper and state that they were made in Spain for Myer.Angel Albert / Made in Spain; Made in Spain for Myerwomen's shoes, footwear, sandals

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. A pair of open toed women’s sandals in silver leather. The name of the shoe and the designer is embossed on the brown leather upper as “Evening Star / Made by Sherry”Angel Albert / Made in Spain; Made in Spain for Myerwomen's shoes, sandals, sherry -- shoes -- spain

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of silver leather women’s shoes with two glass studded buttons at the front. The shoes were designed by Charles Jourdan of Paris expressly for Georges, Collins Street, Melbourne women's shoes, footwear, charles jourdan -- designer -- paris

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Paragon Shoes Pty Ltd was one of the most significant 20th century Australian shoe retailers, and at one time was the largest manufacturer of high quality of women's shoes in Australia. Its factory was located in Melbourne, and its shoes were sold throughout Australia and New Zealand. (Museum Victoria)Pair of two toned brown leather and suede women’s shoes designed and made in Australia by Paragon. The label identifies the Paragon range as Belle Chasseur - Jessica. Genuine leather 7 1/2 Bwomen's shoes, pargon shoes, footwear, shoes

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. A pair of wide shaped and heeled women’s leather slingback shoes designed by Moya in shades of brown, red and ochre.women's shoes, moya -- shoes, footwear

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of brown leather court shoes with deep tan leather uppers, designed by Yves Saint Laurent, Paris.YVES SAINT LAURENT / Pariswomen's shoes, yves saint laurent, footwear, court shoes