This hat was part of the uniform of the Country Fire Brigade. The organization now known as the Country Fire Authority was established in 1945 as a volunteer and community-based organization providing fire fighting and emergency services in regional and rural areas in Victoria. Today the organization includes career fire-fighters and funding is partly provided by a levy included in local Council rates. The owner of this hat is not known. This hat is of minor interest and is retained for display purposesThis is a hat with a circular flat crown made of black felt with 4 eyelets. Around the edge of the crown is a brown leather band with a fabric bow fastening and a black cloth ribbon with a red corded edging. In the centre is a brass badge with letters on it. The peak is made of patent leather with a black leather band on the upper edge with metal buttons. The inside of the peak is made of green leather. Inside the hat is a plastic covering with a leather band. There is a cloth label with yellow printing. Commonwealth Government Clothing Factory Melbourne 7 C.F.B. country fire fighting services warrnambool, history of warrnambool

This is a two part brass cylindrical object. The two pieces slide apart a small distance. This mechanism when operated removes a cap from the wick. On the side is a square, long section that holds a flint & string. On the tip of this section is a circular wheel with a serrated edge. When the inner section is slid down a little, the flame is shielded from the wind by the holes in the outer section. There is a ring mounted in the bottom., Engraved on one side are the letters CFA. Engraved on side of square section is "Patent 91 105107". On other side of square section are the words "Made in Austria". Pat 105107cigarette lighter, souvenir, smoking

The letters were sent home by Alfred G Ferris to his Mother and Sister and states that he has sent the Brooch home not long after arriving in England. Refer cat No 4183.3P for his service details..1) .2) Two letters, red ruled lined paper, hand written in ink, both written on same day. .3) Card, without badge, “Regimental Brooch Badge”, Patent No 8448, yellowish colour..1) Main items, “Codford 5.11.1916” , “Dear Mother”, “from your loving son Alf”. In pencil at bottom, “Silver leaves from S Africa” .2) Main items, “Codford 5.11.1916”, “Dear Marian”, “Love from Alf”letters, brooch, ww1, s.africa

The Ideal Clipless Paper Fastener is what is known as a stapleless stapler. It uses the Bump fastening method which was patented in the U.S. in 1911. The Ideal measures 4.75″ H x 3.125″ W x 1.875″ L and weighs 6.5 ounces. It was manufactured and sold in Japan but also exported to England. The case is made of stained wood with the fastening mechanism made of polished steel. From unsubstantiated sources I understand the wood is Japanese Boxwood, but I cannot verify that at this time. The markings on the front and reverse are done in black paint. The two patents listed on the reverse side of the fastener are Japanese patents. They were granted in March and September 1918 respectively. The patents were granted to two different men. The letters CK on the reverse of the fastener seem to be the initials of the two patent holders. If the design of a C superimposed over the K is a trademark as indicated, it would imply that the two patent holders went into business together to manufacture the Ideal Fastener. I’ve been unable to determine fully the names of the patent holders, but the K seems to refer to a Mr. Kuroda who was the author of the later patent. The Ideal fastener was sold alongside the Clipless Stand Machine (available 1911-1923) and Bump Fasteners in Japan. The latest patent number on the Ideal is from September 1918. Furthermore, there was also an all-steel model of the Ideal Clipless Paper Fastener being sold in 1922. While the available evidence is both sparse and largely circumstantial, I believe the Ideal Clipless Paper Fastener would have been sold from 1919 until about 1923. Furthermore, with the availability of an all-steel model in 1922, it is likely that this newer model would have been introduced as the replacement for the wooden-cased version giving me further reason to believe that this would not have been sold after 1923. The fastener was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. Dr. Angus was in England in the 1920’s and could very well have purchased the Ideal Clipless Paper Fastener during his study time there. It was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” and includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. [References; Ideal Clipless Paper Fastener, Antique Outings http://antiqueoutings.com/ideal-clipless-paper-fastener/ ; Australian College of Ophthalmologists, Vol 11, 1970.; Medical Directory of Australia listing, alphabetical says 1929, Royal College of Surgeons Edinburgh says 1928; Documents re Dr Angus from daughter Berry McDade, received at Flagstaff Hill Maritime; Portland Examiner, June 13, 1969; The Advertiser (Adelaide) 14th Nov, 1910 - Blind restored to sight – Dr Edward Ryan, Melbourne; The Hamilton Spectator, Wed 15th April 1914 – Ararat man with eye affliction attended to by Drs E & T Ryan; The Nhill Hospital, first 100 years, 1885-1985, by Jan Doust; The Horsham Times, Tuesday 6th January 1885 – Dr Edward Ryan appointed to Nhill Hospital; People who passed this way – Warrnambool and District Historical Society; Warrnambool Base Hospital Report 1969-1970 The Standard, 22/6/1990; The Argus, 1970; Letter to Mrs G Angus from John Lindsay, Flagstaff Hill, 8/5/1973; ] This Ideal Clipless Paper Fastener is significant as a rare example of a clipless paper fastener used as office stationery of the 1920’s. This Ideal Clipless Paper Fastener is significant for its association with the W.R. Angus Collection, which is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Paper fastener, clipless or stapleless. Part of the W.R. Angus Collection. Branded Ideal Clipless Paper Fastener, made in Japan. Push down action on wooden handle, metal cutting mechanism cuts and folds the cut flap to join two pieces of paper. Stained wood base, sides and handle, floral fabric under base. Inscriptions on sides and base are in black paint print. Early to mid 1900’sPrinted on sides “IDEAL CLIPLESS PAPER FASTENER” and “TRADE MARK (K with a C through it) PATENT NO. 45105 46743” and stamped into base "MADE IN JAPAN"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, ideal stapleless stapler, ideal clipless paper fastener, ideal paper fastener made in japan, paper fastener, office stationery, patent 45105 46743, ideal clipless paper fastener ck, logo ck c over k

This clear, light green, glass "hand blown" fruit preservation jar was used before the mass manufacturing of "screw topped" fruit preservation glass jars imported from Asia or great Britain. The "Mason's Patent" on the jar was for the screw-neck form of the jar top. The screw neck provided the jar with a vacuum seal (preservation) method of fruit jar storage. The reference on the jar of the actual date that the patent was established was in effect for 13 years with extension of a further 7 years. It was an American world wide patent which resulted in only specific manufacture to Glass Works that had paid the manufacturing levy imposed. The air bubbles in the glass suggests that this jar was "hand blown". This would then place the manufacture date before 1900. Preserves came in glass jars bought at the local grocery store or at a large city store on a shopping expedition. The shape of the jar changed as did the stopper used to seal it. Jars were recycled remaining the property of the manufacturer. History of Mason's.This fruit jar is significant to a rural area such as the Kiewa Valley and in the early 1900's when the preservation of fruit and vegetables was an intrinsic part of the typical rural farm/property family. Local shops could only supply fruit and vegetables as seasons permitted. The travelling "green grocer" was more prevalent in towns and cities but not in semi remote rural areas. Historical: Change of jars - shape, glass, stopper, embossing & use. Aesthetic: Display showing embossing & shape especially if in good condition.This vintage "Mason's Patent", screw on thread lid fruit jar was hand blown (air bubbles). It was produced for the home canning of local fruit. The jar is made from thick glass and is tinted light green. Clear glass jar with slight green tinge used for preserves. sides almost straight but jar has a slight bulge almost all the way to the top. Heavily embossed on 1 side. Horizontal print in large capital letters. At the top - manufacturer's name with emblem beneath it. The base has a slight bulge inwards with embossing.In a half ecliptical form "MASON'S" and underneath the Mason's logo.Under the logo "PATENT/ NOV 30 th / 1858". On the base "C201" (double molded).fruit and vegetable preserves, domestic fruit and vegetables bottling, off seasonal fruit and vegetable storage, jar, bottle, preserves, mason's preserves

Typewriters pre dated computers. This typewriter was possibly used in an office or at home. It was used with an inked tape which may have been only black or had both red and black ink along it. Multiple copies of the material being typed were done using carbon paper inserted between sheets of paper. The original paper was easily identified.Used in the Kiewa Valley.Small grey metal typewriter with deep green key board with gold letters on top.The margin rod is marked in inches and it has keys for pounds, dollars and cents, inches and fractions. The loading of A4 paper is done manually. The keys that hit the paper are stainless steel. The keyboard slopes up to the top which is partially hollow with a gap that exposes the stainless steel keys. The cylinder is at the top and at the back with control knobs on each side. This typewriter has 2 sheets of paper with carbon paper between them to demonstrate how copies were made (but there isn't an inked tape in it so the copies aren't authentic)Centre front: "Royal" Letters of the alphabet on the keys. Centre bottom back: "Royal" and below on a plate: "Built in the British Empire / Protected by American / and Foreign Patents"office. typewriter. royal. carbon paper. decimal currency. office equipment. writing.

The Bar Lock typewriter is a patented design by the inventor and lawyer Charles Spiro in 1888. The keys are easily recognised and well spaced. Used by the typists working in the office for the State Electricity Commission of Victoria during the construction of the Kiewa Hydro Electric SchemeLarge, heavy black typewriter with white letters on the keys. Green matt finish with gold printing. c 1921 Model 22?Bar-Lock / Manufactured by / Bar-Lock Typewriter Co. Nottingham England/Supplied by / Richard Williams Pty Ltd. 193/197 King St. Melbourne At the back in gold print: "Serial / Number' rest too hard to read. typewriter, bar-lock, office equipment

This electroplated teaspoon made by Walker & Hall of Sheffield. It was recovered from an unknown shipwreck in the coastal waters of Victoria in the late 1960s to early 1970s. The shipwrecks in the area range from around the 1840s to the early 1930s. It is part of the John Chance Collection. Walker & Hall’s Marks on this teaspoon, the SHIELD and the FLAG, date the spoon between 1910 and before 1920. The letters, possibly N S, within a shield may stand for Nickel Silver. The first Sheffield licence to make electroplated pieces of work was granted to John Harrison in 1843. One of his employees, George Walker, had been sent to learn electroplating skills at Elkington’s in Birmingham, who had patented the process discovered by Dr John Wright. Walker left Harrison in 1845 and started up his own company with Samuel Coulson and William Robson, to become George Walker & Co., electro-platers and gilders, taking out a licence with Elkington’s. In 1848 Robson retired and Henry Hall joined the partnership, operating at Electro Works at 11 Howard Street Sheffield, with a showroom in at 45 Holborn Viaduct, London. The firm had changes in the partnership and by 1853 it was called Walker & Hall. Over the years the company grew, with branches in the UK and overseas in Australia and South Africa. Then John Bingham, and later his brother Charles Bingham, became involved in the business, increasing profits. In 1861 the firm registered its first Trademark, a stamped ‘Flag’ with a banner with letters ‘W & H’. In 1884 Walker & Hall were one of the largest manufacturers and the second to introduce a voluntary system of using dating marks for silver plate, based on the alphabet and styles of shields or figures. The firm grew and prospered. It was described as ‘comprehensive … touching almost every department of Social life’, selling all manner of silverware and other goods. In 1920 the firm became Walker & Hall Limited and continued to expand in the goods produced and the member employed. Then the effects of war brought economic depression and fewer people able to afford the quality luxury goods. Eventually, in 1963, the company amalgamated with Mappin & Webb and Elkington & Co., becoming British Silverware Ltd. Although the spoon is not linked to a particular shipwreck, it is recognised as being historically significant as an example of cutlery, perhaps part of a passenger’s luggage or imported for use in Victoria in the early 20th century. This spoon is significant for its association with makers Walker & Hall, famous for silverware and silver plate in the mid-19th to early-20th century. It is the only example in Flagstaff Hill’s shipwreck artefact collection. The spoon is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Spoon, teaspoon, electroplated, silver-bronze colour with dark flecks. Old English design. Maker’s Marks on back of spoon. Made by Walker & Hall, Sheffield.Embossed individual stamps “W”, “&”, “H”, “S” Embossed shape [SHIELD] with letters within, possibly “N S” Embossed shape of [FLAG] with letters with “W & H” flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, sheffield, cutlery, eating utensils, electroplate, silver plate, silverware, flatware, antique flatware, old english flatware pattern, spoon, teaspoon, silver flatware, dining, silver plated, epnns, 20th century silverware, walker & hall, george walker, henry hall, john wright, elkington

The 'Georgian' sealing set, in a blue leather covered box with brass clasp, contents include a crucible, wax seals, matches & spirit burner. Inside box lid lined with blue silk with gold writing reading, patent No 30394/10 Third Hand Patents Ltd 881 City Rd E.C. Donated by 'Wiegard 6.11.69'Third Hand Patents Ltdcommunication, postal, letters

Cream booklet with brown printing titled Bendigo Electronic Company of Australia Proprietary Limited. Includes Capital, number of Shares, Directors, Solicitors, Bankers Registered Office, Copy of a letter re Patents, Information about Scalebuoys, Users of Scalebuoys, What Scalebuoys Do and Where they are used, Also copies of letters from the Victorian Railways, City Overseer Bendigo, Lane's Motors Pty Ltd Melbourne, Union Oil, Soap & Candle Co. Ltd NZ, Knox Home NZ, Maungatapere Co-Op Dairy Co. Ltd., Whangarei Co-operative Dairy Company Ltd. NZ, Kettering Cartons Limited England, Pennsylvania Rubber Company USA, and the Kansas City Public Service Company USAsciences, instruments - general, scalebuoy, bill ashman collection - correspondence, bendigo electronic company of australia pty ltd, a s bloomfield, r h s abbott jnr, harry ponsonby mackenzie rn (retd), arthur robinson & co, the commercial banking company of sydney limited melbourne, a t madden, h a abbott, e c eyers, frank stevenson, city of bendigo, frank h day, lane's motors pty ltd, h c holland, national mutual chambers (n.z.) ltd, union oil soap & candle co ltd, knox home, n a duthie, w h mccorkindale, maungatapere co-op dairy co ltd, j stevenson, the whangarei co-op dairy company ltd, w h millingford, kettering cartons limited, j g arlidge, pennsylvania rubber company, paul a douden & company, w e humphrey, kansas city public service company, h w smith, j t picken & sons

Newspaper article from the Melbourne Truth, dated Saturday, September 4, 1943. Front page article about George Frederick Heathcote Hanson, patents attorney, of Gipps Street, East Melbourne. Hanson had been reported missing after boarding a train to Sydney. He body was later found under briar bushes at Young. The Coroner's finding was that death had resulted from exposure, after taking the phenobarbitone. He believed he was not making a success of his business, and because he was unable to give his wife all the things he thought she deserved. Also printed are copies of letters he had written to his brother and his wife. (This was his second wife, his first having died four years earlier.)sciences, instruments - general, scalebuoy, bill ashman collection - truth, george frederick heathcote hanson, mr c m western, harold herbert hanson, estmere hanson, patents office, det windsor, commercial hotel young, dr george milroy whish, det albert edward windsor, sgt w f searson, john edwin chaplin, mr hayes, isobel hanson, ada hanson

Postcard with raised 8.5cm x 8.5cm coloured image of Crystal Palace London. Image has printed words 'Patent' and 'Fab Card' either side of a printed coat of arms at the top and letters W.N.S.B. bottom left corner and 'Series V No 51' bottom right corner. Image is attached to printed 14cm x 9cm black and white printed card. The words 'Fab Card' and 'The Art Patchwork Series' appear on the card either side of the image. Printed drawings of a woman seated sewing and standing placing a cloth on a table appear either side of the image. On reverse card is addressed to Miss Dean McKenzie Street Golden Square Victoria Australia. 1 penny stamp attached.W.N. Sharpe Sole Publisher Bradfordpostcard

Postcard with raised 8.5cm x 8.5cm coloured image of Royal Exchange London. Image has printed words 'Patent' and 'Fab Card' either side of a printed coat of arms at the top and letters W.N.S.B. bottom left corner and 'Series V No 52' bottom right corner. Image is attached to printed 14cm x 9cm black and white printed card. The words 'Fab Card' and 'The Art Patchwork Series' appear on the card either side of the image. Printed drawings of a woman seated sewing and standing placing a cloth on a table appear either side of the image. On reverse card is addressed to Miss Dean Golden Square Victoria Australia. 1 penny stamp attached and postmarked Johannesburg.W.N. Sharpe Sole Publisher Bradfordpostcard

Postcard with raised 8.5cm x 8.5cm coloured silk image of Tower Bridge London. Image has printed words 'Patent' and 'Fab Card' either side of a printed coat of arms at the top and letters W.N.S.B. bottom left corner and 'Series V No 40' bottom right corner. Image is attached to printed 14cm x 9cm black and white printed card. The words 'Fab Card' and 'The Art Patchwork Series' appear on the card either side of the image. Printed drawings of 1. two women, one seated sewing and one standing sewing and 2. two women standing examining a cloth, appear either side of the image. On reverse card is addressed to Miss G Dean McKenzie St Golden Square Victoria Australia.W N Sharpe Sole Publisher Bradfordpostcard

Postcard with raised 8.5cm x 8.5cm coloured image of Trafalgar Square and entrance to The Strand 4521 London L.S. & P. Co. Image has printed words 'Patent' and 'Fab Card' either side of a printed coat of arms at the top and letters W.N.S.B. bottom left corner and 'Series V No 21' bottom right corner. Image is attached to printed 14cm x 9cm black and white printed card. The words 'Fab Card' and 'The Art Patchwork Series' appear on the card either side of the image. Printed drawings of a woman seated in a chair and seted with a fan appear either side of the image. On reverse card is addressed to Miss Dean Golden Square Victoria Australia. 1 penny stamp attached.W.N. Sharpe Sole Publisher Bradfordpostcard

Postcard with raised 8.5cm x 8.5cm coloured image of Buckingham Palace. Image has printed words 'Patent' and 'Fab Card' either side of a printed coat of arms at the top and letters W.N.S.B. bottom left corner and 'Series V No 43' bottom right corner. Image is attached to printed 14cm x 9cm black and white printed card. The words 'Fab Card' and 'The Art Patchwork Series' appear on the card either side of the image. Printed drawings of a woman seated sewing and standing placing a cloth on a table appear either side of the image. On reverse card is addressed to Miss G Dean Golden Square Victoria Australia. 1 penny stamp attached.W.N. Sharpe Sole Publisher Bradfordpostcard

This linesman's handset has an earpiece, a mouthpiece, a dialling interface and a set of test leads for connecting to the telephone circuit. This handset has a rotary dial and a hook for hanging the set from a toolbelt. Made of black bakelite. Patent - for improved number dial.Large dial with numbers 1 to 9 + 0. Small dial with letters A, B, F, J, L, M, U, W, X, Y around outside. Telephone No. . . . . . . Listen for dial tone AUS PAT 5338122 BRIT PAT 289244telephone, linesman's test phone

Yields information about how the SEC filed pamphlets or information papers about tramway overhead and associated equipment and letters.Green cardboard file folder with metal clip and binder - "The Acorn Individual File - Foolscap size with title blocks containing the following items: 4910 - Tangential Suspension - overhead 4911.1 - Letter from "The Forest City Electric Co. Limited" to ESCo re Point controllers, tramway signals and warning signs, dated 29/7/1936 - 2 pages 4911.2 - Collins Patent Automatic Point Turner - sheet 19 - 4 pages - sheet 19, two copies 4911.2a - ditto, sheet 18 QT - four pages 4911.3 - Electrically operated Point switches, overhead frogs and signals for tramcar depots. - four pages 4911.4 - Automatic Tramway Signals - five pages - sheet ATS1 4911.5 - Universal Insulator - Sheet 17 - 2 pages 4911.6 - Porcelain hangers - sheet 15/1 - 2 pages 4911.7 - Porcelain insulators for cap and cone supension - page 11, 1 page. 4911.8 - Motor Bus and Tramcar Stage and Fare Signs in Cast Aluminium - sheet MD2 - 1 page 4911.9 - Flashers and Spellers - Sheet F1 - 2 pages 4911.10 - Forest City Relays - 2 pages 4911.11 - Traffic light - 1 page, sheet 2A 4912 - Memo re Suitability of Mr A. Widdop as a linesman - 18/11/1936 4913.1 - Letter dated 22/6/1937 from Agent General in London to the SEC Melbourne regarding shipment of the Non-Car Counting Signals. 4913.2 - Letter from the Forest City Electric Co 18/6/1937, regarding forwarding a blue print for the signals. 4914 - Letter from the Forest City Electric Co 23/6/1937, regarding forwarding sample insulators and booklet 15.2 4915 - Letter from Sands Hill Manufacturing Co to ESCo re regarding overhead crossings - dated 13/4/1928. 4916 - Memo dated 14/3/1934 to Mr Pringle, regarding tension in trolley wire. 4917 - Letter from T. Strickland MMTB to Bendigo re standard height for ears above rail level - 16/3/1934. Some of these document Scanned in pdf form to COTMA Library 1/2011 On rear of file: Top of file - "Tramways", in title block "Tramway Overhead & Signals" and in bottom right hand corner - "230". On spine - in pencil - "Overhead Parts and Proceedings"trams, tramways, signals, overhead, pamphlets, manual

Has a strong association with the Geelong tramway system, yields information about the sealing or securing equipment from interference and demonstrates the type of equipment used. Exact use not known - could have been used for multiple purposes.Nickel plated steel sealing punch - with base unit, spring, handles, pins and punch or press that was used to seal or secure lead seals either on power meters, ticket boxes or circuit breakers. Placed letters "M.E.S. Co Ltd" onto the lead seal along with numbers "1". On outside of handle "PAT. 9682 1902" and in inside ".1" - the number of the press? Knowledge of manufacturer unknown - possibly the UK. Could research the Patent numbers - a quick search at the time failed to show something.trams, tramways, sealing, mesco, seals

A Wright & Ditson 'All American' model wooden racquet with open throat and octagonal grooved handle. String whipping around shoulders, throat pieces and around base of throat. Leather end wrap. On obverse, model name appears as a decal atop throat on base of head. On both obverse and reverse the trademark, patent information and country of manufacture are printed on shaft. On reverse, Manufacturer name is printed as decal on base of head, above throat. Indistinct letters carved into handle,and into shaft. Instructions on side of throat state: BAL/FROM/THIS/POINT. On one side of shaft:WRIGHT & DITSON/MAKERS/MADE IN U.S.A. and further down:STRUNG BY. Materials: Wood, Gut, Metal, Lacquer, Glue, Ink, Leather, Stringtennis

"Grace Blake’s conversations with older members of the Club have elicited the following information during July 2014: • Don Christie recalls the machine being acquired by (or donated to) SMRC in the 1960s. SMRC later donated it to APRC. • Bob Duncan remembers it being at APRC. • Max Shaw joined the club in 1946 but doesn’t recall it at all. • Peter Watson recalls collecting the rowing machine from the old APRC club house before its demolition (c. 1995). The AP-SMRC machine carries a ‘maker’s plate’ with the name Moore... Moore Crane and Engineering Company Pty Ltd was a subsidiary of Malcolm Moore Industries Ltd whose manufacturing engineering works were located on Williamstown Road, Port Melbourne from 1927. The founder established the main business in 1921 and retired in 1953.21 The business was delisted from the Australian Stock Exchange in 1976. Grace Blake advises that some of the earlier SMRC members were plumbers and therefore worked in trades connected with engineering. She reports that Peter Watson recalls some of his contemporaries completing their engineering apprenticeships at Malcolm Moore Industries Ltd in the 1970s. There are still many unanswered questions concerning the history and provenance of the rowing machine at the time of writing this report, but the connection with a local engineering works is certainly fascinating. Questions to explore in the future include: Did Moore manufacture the machine, or import it (and perhaps assemble it) under licence? Was this machine a ‘one-off’ or did Moore make / distribute others within Australia? When, why and how did SMRC acquire the machine? Why did SMRC decide not to retain it, but to pass it over to APRC? And how did APRC use it?" 2014 Significance Assessment, pp38-40. "The ‘Moore’ Rowing Machine at the Albert Park – South Melbourne Rowing Club (AP- SMRC) is a rare example in Australia of the Kerns patent design from 1900. This machine may not, however, be that old in construction or use. The AP-SMRC machine is almost intact, appearing to lack only the leather straps for fastening the rower’s feet to the foot-rests. Spalding manufactured the design in the USA in the early decades of the 20th century, but the metal elements in its models are traditionally black. The bright red paint on the AP-SMRC machine suggests something different. The AP-SMRC machine carries a maker’s plate that associates it directly with a local engineering business, Malcolm Moore Industries Ltd of Williamstown Road, Port Melbourne. Club members recall the machine being at the South Melbourne Rowing Club in the 1960s, and being transferred at a later date to the Albert Park Rowing Club. The machine has not been used since the founding of the amalgamated AP-SMRC and requires careful conservation. The ‘Moore’ rowing machine is of national research significance as a rare survivor, in Australia, of the well-regarded Kerns patent design that was popularised by Spalding in the northern hemisphere. The English River and Rowing Museum website quotes a testimonial from an AG Spalding & Bros’ Mail Order Catalogue: ‘This machine was described by ‘an experienced oarsman’ ... “to be the most perfect rowing machine ever produced”. A feature was the adjustment of the resistance so “the weaker sex can use the machine”’. Its historic significance lies in its rarity (and perhaps uniqueness) as an aid to the training of rowers at two successful clubs on Albert Park Lake. Additional historic significance lies in the connection that the rowing machine represents between local rowing clubs and a major local manufacturing engineer. The ‘Moore’ rowing machine bridges the realms of innovation and application, of industry and recreation, of land-based and aquatic sports, and of two neighbouring rowing clubs on the Albert Park Lake." 2014 Significance Assessment, p43"A rowing machine that appears to be built to the Kerns patent design from 1900 but may not be that old in construction or use. The machine is heavy and includes parts made from cast iron. The cast iron components are painted in a distinctive bright red. The wooden seat moves on timber slides. Resistance is created by spring mechanisms at the ends of two frame elements that connect with two wooden ‘oars’, and by the central chain-driven system that co-ordinates with the rower’s movements. The machine carries a maker’s plate with the single word ‘Moore’ in an oval design, using white letters against a navy background, fastened to the base board and close to the foot-rests." 2014 Significance Assessment, p38Moorerowing, apsm rowing club, significance assessment, malcolm moore industries ltd, kerns, 1900, sculling machine, albert park rowing club, south melbourne rowing club, albert park lake, rowing machine, ergo

Medal was awarded in Paris Exposition in 1900.Wooden child's printing set in box, with letters of the alphabet and numbers. Has metal hinges. Patented 5/2/1901printing blocks, printing equipment

At the time of the 1982-83 bushfire season FCV firefighters wore either navy blue issue overalls or their own clothing, generally a checked flannel shirt and jeans. Uncomfortable safety boots and hardhats were issued. The CFA had switched from white overalls to their distinctive yellow kit by 1983. In about 1980, in a far-sighted corporate move for the time, Alan Threader, who was the Chairman of the FCV, established a departmental safety committee, which he personally chaired. The Committee, among other things, wanted to upgrade fire safety clothing. Alan also initiated a radical colour idea after a work trip to the UK in about 1981 and brought home a small sample swatch. Alan believed that the now distinctive bright yellow-green was a good colour contrast to the Victorian bush which is a blue-green hue. Trevor Brown from Stores Branch scored the task to make the change and letters were sent to the UK seeking information about the pigment. The FCV worked with the Commonwealth Dyers Association and Cushen Clothing to replicate the shade on cotton drill, which presented darker when it was treated with the flame-retardant chemical, Proban. The first of the new Kermit Suits were rolled-out in late 1984, and the stylish colour was initially registered and patented to the Department. But it's also fair to say that the new gaudy shade of apparel wasn’t universally popular with staff. The lime green overalls were an Australian first, and forest agencies in other states followed a few years later. In the early 1990s, armed with a pair of dressmaker’s scissors, the baggy one-piece Kermit boilersuits were tailored by Peter Billing from Fire Protection Branch and Trevor Brown in conjunction with the family-owned business, Top Level Workwear, which saw numerous enhancements and prototypes. The two-piece Kermit suits were available in the late 1990s after many years of argy-bargy and complaints from field firefighters. Protective overalls Two types - early FCV (c 1983) and later CNR (1992) forests commission victoria (fcv), protective clothing, safety equipment

Allan Llewellyn was a well known Eaglehawk identity. See Allan Llewellyn Collection Cat. No.8389. Eleven typed pages of extracts from the 'Bendigo Advertiser' and one private letter to J.H. Seymour, contained in a manilla envelope with Mr. A. Llewellyn, 102 Victoria Street, Eaglehawk, Victoria 3556' written on front in red ink. In pencil above address: 'Please return to A. Llewellyn, Eaglehawk' Stamp, 7 cent, on top right hand corner shows Queen Elizabeth. Copies of letters published in the Bendigo Advertiser contained in envelope: 1. Letter from John H. Seymour, 25yth October, 1876, discussing the prize given to an exhibitor at the National Show, rather than the Seymour model exhibited by the writer. The writer is only a 'working miner and .. could not afford to make a full size cage'. 2. Letter from 'Fair play' 1st December 1876 regarding Seymour's model and that he should be given the opportunity to have his full size cage tested by the Judges. The cage was working at the Londonderry's Tribute Co. 3. Letter from 'unknown' regarding Nancarrow's Safety Cage, discussing Seymour's claiming 'the levers as his patent'. 4. Two letters from J.H. Seymour, regarding the unfair nature of the testing of the safety cages. Letters dated 1876. 5. Three letters from James Watson, blacksmith, Sandhurst, regarding the construction of the mining cage model exhibited by James Seymour. 6. Two letters - one from H. Banfield, Mining manager, Londonderry Tribute regarding the testing of Seymour's Patent Safety Cage design, dated October 25th. 1876. Second letter on page, regarding an accident at the South Clunes Tribute shaft, where an engineman Thomas Bonda (sometime Secretary of the Miners' Association) was injured when a cage went to the bottom of the shaft. 7. Article 'Accident at the Shenandoah Claim' detailing an accident with a mining cage when the 'rope slipped off the drum'. Article 'The Perils of Miners' detailing an accident at the Preston Hill claim, Ballarat. 8. 'Miraculour Escape' article detailing a mining cage accident at the Trio Company's shaft at Snob's Hill, September 4th. 1876. 9. 'Safety Cages', letter from Elisha Tippett, Manager Londonderry Tribute company, 7th August 1877, discussing the merits of the safety cage being used at the mine, known as 'Seymour's Patent Safety Cage' 10. 'Trial of Seymour's Patent Safety Cage' where a successful trial was held, then followed by a trial where the cage didn't perform as expected and the 'cage fell heavily to the ground'. 11. Copy of letter from Thomas Dunne, Mining Manager, to Mr. Seymour, regarding the successful operation of Seymour's Patent Safety Cage at the 'Confluenca Mine', Malmsbury on 25th August 1882. Typed across bottom of last copy of letter: 'The foregoing data supplied by Mr. Frank Fitzpatrick of Eaglehawk and retyped by A. Llewellyn. Through the lapse of time some of the words are not decipherable. In copying there could be some slight errors.' safety cages, seymour's patent safety cage, j.h. seymour, nancarrow's safety cage, bendigo, mining, allan llewellyn,

Official seal of the Wodonga Sewerage Authority. Manually operated to imprint the official seal on documents.Local and state significance due to its direct association with Wodonga in Victoria and the dated patent.Heavy black painted metal object with a handle and the official seal of the Wodonga Sewerage Authority, used to manually imprint "WODONGA SEWERAGE AUTHORITY" on documents. In working order. Patent dated to July 13 1920 - stamped on the end of the metal handle. "ROESZLER'S / 429 LT COLLI..." "...WER" painted in white on one side - the first two letters are worn and incomplete but appears to have been "SE" for "SEWER" "...PAT. July 13 1920"local government, waterworks, wodonga, water & sewerage trusts, sewage

The original Hall Braille writer was modelled on the typewriter and was the first successful mechanical point writer. Frank Haven Hall, Superintendent of the Illinois Institution for the Blind, introduced his invention to the public on 27 May, 1892 at Jacksonville, Illinois. It was manufactured by Harrison and Seifried, Chicago, ca 1892. The carriage moves one space to the left as the keys are released. The styli in the embossing heads are controlled by the keys as are the bars on a typewriter. The styli operate from the back so that letters appear in the normal position for reading. Braille writers enable all dots in a Braille cell to be created simultaneously. This model was found in the Braille and Talking Book Library in South Yarra prior to the staff departure in 2000. Presumably used by either staff or volunteers at the library.Braille writer with a key board like a piano with black wooden keys on an ivory board. The body is made from heavy cast iron with a black lacquer.Painted in gold on top of the machine: "The Hall Braille Writer / patent pendingbraille equipment, assistive devices

This letter book contains letters written by representatives of the Warrnambool Lance Patent Pan Company to agents in Western Australia during the period 1896 to 1913. This company was formed to market the Lance Patent Cess Pan produced by George Lance in Warrnambool. The Western Australian venture did not prove profitable for the company. George Lance was a Warrnambool plumber and gasfitter who produced the Eureka Pump and the Lance Patent Cess Pan. The latter sold widely in Victoria with the Warrnambool Council owning 1700 of these pans in 1896. George Lance was also prominent in Warrnambool as a musician, artist (eleven of his works are in the Warrnambool Art Gallery)and local history writer. He was also involved in the development of the Warrnambool Mechanics Institute and the establishment of the Warrnambool School of Art and Design and the Warrnambool Art Gallery. This letter book is of considerable interest as it gives details on one aspect of the George Lance invention of the Patent Cess Pan (its marketing) and George Lance played an important role in Warrnambool's late 19th century history.This is a letter book of 506 pages. It has a hardboard cover with a mottled red pattern and red binding on the spine. The pages contain an alphabetical index and copies of letters handwritten in black ink. There are many blank pages. The letter book cover is torn at the edges.george lance patent cess pan, george lance warrnambool, warrnambool plumbers, cess pan patents