R.A.A.F. Diamond Jubilee 5/04/1981 Pictures of RAAF history produced framed series of prints of aircraft 1921 to 1981, of which these prints are a example.Pictures (two off ) RAAF Aircraft part of RAAF history from 1921 - 1981.992.1 R.A.A.F. picture of Avro Ab'Intio (AKA Avro 504K) Aircraft Trainer in 1921 - Picture released for R.A.A.F Diamond Jubilee. 992.2 R.A.A.F. picture of CAC Wackett Aircraft Trainer in 1939 - Picture released for R.A.A.F Diamond Jubilee.992.1 Avro Ab'Intio Aircraft Trainer On front of picture lower right corner is details of Avro Ab'Intio in 1921 The R.A.A.F.'s first training Aircraft were the rotary engined Avro 504Ks. Royal Australian Air Force No.2. Picture Title of " RAAF AIRCRAFT 1921 - 1981". 992.2 Naive Native CAC Wackett Trainer. On front of picture lower right corner is details of Naive Native CAC Wackett Trainer of 1939 introduced Monoplane to the RAAF. Royal Australian Air Force No.6. Picture Title of " RAAF AIRCRAFT 1921 - 1981".framed picture r.a.a.f. avro ab'intio aircraft trainer., framed picture naive native cac wackett trainer., pictures of raaf diamond jubilee frames pictures.

A yellow plastic cover with a clear window. top right corner handwritten is MP2E - 2. Under the RAAF insignia reads Royal Australian Air Force and Engineering Publication. The information of the manual is through the window. The manual is held together with a large metal slide. Amendment List No. 1 is inside the cover.royal australian airforce - manuals, engineering publication, actuator tyoe fjc/a

A yellow plastic cover with a clear window. Under the RAAF insignia reads Royal Australian Air Force and Engineering Publication. Through the window are the details of the manual. The manual is held together by a large metal slide which is in the inside of the manual. The manual has what looks like oil/grease splats on the cover.royal australian airforce - manuals, engineering publication, direct reading pressure gauges

A blue coloured cardboard cove with black information on the front. At the top right hand corner reads Australian Air Publication 7453.088-3. Above the RAAf insignia reads Royal Australian Air Force and under the insigia is the details of the manual. There are three punch holes and two metal staples down the left hand side.royal australian airforce - manuals, australian air publication, starter units

The manual is cover with yellow plastic with a window at the front. On the cover under the RAAf insigia reads Royal Australian Air Force which is in white. There is a white label at the top and bottom of the cover with black information on them. Through the wind reads the details of the manual. The manual is held together with a large metal slide which in on the inside of the cover. royal australian airforce - manuals, inverter

A blue linen covered cardboard cover with black information of the front. Top right hand corpner reads AAP 7416.024-3 former Australian Air Piblication 742.30. Above the RAAF insignia reads Royal Australian Air Force and under the insignia are the details of the manual. The manual is held together by three metal screws.royal australian airforce - manuals, australian air publication, control panel type 34, voltage regulator type 93

A blue coloured cardboard cover with the information on the front in black. Top right hand corner reads Australian Air Publication 7415.013-3. Above the RAAF insignia reads Royal Australian Air Force and under the insignia is the desription on the manual. There are three punch holes and two metal staples down the left hand side.royal australian airforce - manuals, base control panel, australian air publication

A yellow cardboard cover with black information on it. Top right hand corner reads Australian Air Publication 7416.007-3. Above the RAAF insignia reads Royal Australian Air Force and under the insignia reads Voltage Regulator Type A1202 STC etc. The manual is held together b a large metal slide.royal australian airforce - manuals, australian air publication, voltage regulator

A blue coloured cardboard cover with black information of the front. Top right hand corner reads Australian Air Publication 7421.019-3. Above the RAAF insignia reads Royal Australian Air Force and under the insignia are the details of the manual. There are three punch holes and two metal staples down the left hand side of the manual.royal australian airforce - manuals, australian air publication, rotary inverter type 102a

A blue coloured linen cover on cardbaord. Top right corner in ink reds AAP 7494-007-3. Under this reads Australian Air Publication 749.61. Above the RAAF insignia reads Royal Australian Air Force and under the insignia are the details of the manual. Down the left hand side a three metal screws holding the manual together.royal australian airforce - manuals, australian air publication, high energy ignition unit

A yellow coloured cardboard cover with black information on the front. Top right corner handwritten reads MP2E-2 and under this reads Australian Air Publication 7453.090-3. Above the RAAF insignia reads Royal Australian Air Force and under the insigni are the details of the manula. There are three punch holes and two metal staples down the left hand side.royal australian airforce - manuals, australian air publication, torque switch

A yellow coloured cardboard cover with black information on the front. Near the top right hand corner reads Australian Air Publication 7453.098-3. Above the RAAf insigia reads Royal Australian Air Force and below the insigna are the details of the manual. Inside the manual there are several cardboard inserts with tabs on the. Down the left hand side of the manual are two metal staples.royal australian airforce - manuals, circuit breaker

A yellow coloured cardboard cover with black information on the front. Near the top reads Australian Air Publication 7432.078-3. Above the RAAF insignia reads Royal Australian Air Force and under the insignia are the details of the manual. Down the right hand side there are seveal cardboard tabs with numbers on them. Down the left hand side of he manual are two metal staples.royal australian airforce - manuals, australian air publication, actuator english electric type ae 4021 - mk1

A yellow coloured cardboard cover with black information on the front. Top right corner reads Australian Air Publication 7514.063-3. Above the RAAf insinia reads Royal Australian Air Force and under the insignia are the details of the manual. Down the right hand side there arre cardboard inserts with tabs. The manual is held together with a metal staple top left hand corner.royal australian airforce - manuals, australian air publication, millivoltmeter temperature indicators

A yellow coloured cardboard cover with black information on the front. Near the top right hand corner reads Australian Air Publication 7421.018-3. Above the RAAF insignia reads Royal Australian Air Force and under the insignia are the details of the manual. Down the right hand side there are several pieces of cardboard with tabs. The manual is held together with a large metal slide.royal australian airforce - manuals, australian air publication, rotary inverters type 201 series

a blue cardboard cover with black information on the frint. Top right hand corner handwritten reads 2 Sqn - 1. Under this reads Australian Air Publication 7842.034-3. Above the RAAF insignia reads Royal Australian Air Force and under the insignia are the details of the manual. There are two metal staples and three punch holes down the left hand side.royal australian airforce - manuals, australian air publication, landing lamp, 2 sqn

A yellow coloured cardboard front cover with black information. Near the top reads Australian Air Publication 7453.099-3. Above the RAAF insignia reads Royal Australian Air Force and under the insignia are the details of the manual. Down the right hand side there are cardboard inserts with writing on each tab. The manual is held together by two metal staples. There is an amendment inside the manual.royal australian airforce - manuals, australian air publication, circuit breaker, circuit breaker type d

A grey coloured plastic cover with a yellow A4 insert. On the insert near the top right corner reads Austrlian Air Force 7432.074-2 and above this in handwriting is MP2E-2. Above the RAAf insignia reads Royal Australian Air Force and below the insignia are the details of the manual.Down the spine of the manual reads 7432/074/3. Inside the manual there are sevenal loose amendments. The manual is held together by metal slide.royal australian airforce - manuals, australian air publication, rotary actuators

A yellow coloured cardboard cover with black information on the front. Top right hand corner reads Australian Air Publication 7551.054-2. Above the RAAF insignia reads Royal Australian Air Force and beside the insignea there is a stamp which reads R.A.A.F. Library Copy No: 2: Base Squadron Amberly. There are three punch holes and tow metal staples down the left hand side. There are two amendments inside the manual.royal australian airforce - manuals, australian air publication, oxygen valves

The Volunteer Air Observers Corps was an Australian air defence organisation of World War II.It was formed on 31 December 1941 to support the Royal Australian Air Force by sighting and observing aircraft over Australia.It swiftly established observation posts across Australia and provided information to the RAAF's regional air control posts. As the threat to Australia declined its role was expanded to include coast watching, assisting air traffic control and weather reporting. The corps was staffed by civilian volunteers and reached a peak strength of 24,000 personnel and 2,656 observation posts in 1944. After the end of the war the VAOC was reduced to a cadre in December 1945 and was disbanded on 10 April 1946. The Volunteer Air Observers Corps was an Australian air defence organisation of World War II. This certificate is a record of the participation of members of the Orbost district. Anita Armistead, wife of Francis Armistead had a son, Sydney, who served as a gunner in Malaysia during WW11.A certificate of service awarded to Mrs F. Armistead for being a volunteer in the Air Observers Corps. It was awarded on 20 Sept, 1945 for one year's service.For King and Empire Presented to Mrs F. Armistead by the ROYAL AUSTRALIAN AIR FORCE As a record and in appreciation of patriotic response to the call of country by serving in the VOLUNTEER AIR OBSERVERS CORPS This 20th day of September 1945 signed G. Jones Air Vice Marshall Chief of Air Staff signed ? Unit Commanding Officercertificate ww11 air-observers-corps

This type of head dress was very commonly worn by British Commonwealth Forces in the Sub Continent and other tropical areas. This particular example would have been a common sight in Northern Australia during the time frame, as well as Africa, Middle East and the Pacific. It is a light weight ventilated helmet offering good air circulation via the vent in the top of the crown, and shade to the back of the neck. As well as protection by the peaked front for the eyes reducing glare, preventing sun and heat stroke. It also created an image of gentlemanly dress and pride in appearance. It conformed to an ideal and was considered quite fashionable and a little dashing, often worn at a jaunty angle, creating a rakish air, far from today's simplistic view of pure functionality and at as low as possible cost. Whether worn with a tropical uniform with jacket and trousers, or open necked shirt and shorts, the wearer was easily identifiable as British or one of the Commonwealth countries.WW2 RAAF Wolsley cork helmet. Helmet Khaki cotton six (6) panel outer, with three (3) fold pugaree. Colour patch on left side approximately 6cm X 5.5cm, Dark blue,2.5cm, Light blue, 0.5cm and Maroon 2.5cm. Tan leather trim around brim, tan leather chin strap. Traditional pith helmet four (4) hole domed type vent on top of crown. Beige leather sweat band pierced around the top and with a cotton cord adjustment threaded around. Fixed to shell in four points diagonally. Interior is also covered in Khaki cotton. Hand written in brown ink. A1917 F/Lt C KERR GRANTworld war two, head dress, helmet, pith, cork, cloth covered, leather trimmed, royal australian air force, officer, flight lieutenant, khaki, pith helmet, air force, tropical, hat

Letters of Sympathy from RAAF Units for Dental Surgeon "Mervyn Clive Townsend" lost on HMAS SYDNEY on 15/11/41. Refer Cat No. 2313P for Townsends service.1. Handwritten letter on white paper. Paper headed with RAAF stamp and name of Military Base. 2. Handwritten letter on cream white paper. Royal Australian Air Force stamp in top left corner and name of RAAF Unit in right corner. 3. Handwritten letter of cream white paper. Stamp at top of bird with outstretched wings with crown at top.1. Listed from RAAF Station, Nhill, Victoria and dated 3/12/41, signed by “Edward Campbell”. 2. Listed No. 1 School of Technical Training, Radio Mechanics Course, Dated 1st December and signed “Allan Davis”. 3. Listed No. 2 METO Course, School of Technical Training and dated 3/12/41.hmas sydney, kia, ww2, mervyn clive townsend

Battle uniform jacket is for less formal circumstance. Belonging to "Peter Stoklahsa" enlisted 1966. Refer Cat 7674P.RAAF blue uniform jacket size 10 OR. Royal Australian Air Force shoulder patches.. Commonwealth emblem patch sewn onto lower arms. Two breast pockets with service ribbon attached above left pocket. Material epaulettes on each shoulder with a black button and gold RAAF Eagle and Crown Emblem. Zipped front with stretch bands on bottom sides. Inside cotton lining. Inside pocket - label of maker on inside.Label - "A.G.C.F. VIC. 1981. 8405.66.103.8063 Size 10 OR. Service No. Cleaning instructions. raaf, uniform, peter stoklahsa

These badges are hat or cap badges used by the Royal Australian Air Force . These badges may date from before World War Two but the ones used today are of similar design. The basic design mirrors the equivalent design of the badges of the Royal Air Force of Britain. The Royal Australian Air Force was established in 1921 and is the second oldest Air Force in the world, being formed from the Australian Flying Corps which was established in 1912.These cap badges are of interest as early examples of those worn by members of the Royal Australian Air Force..1Bronze badge featuring a crown, a wreath of leaves and berries enclosing stylised RAAF. There are two small rings on the reverse each with a two pronged brass pin inserted in the rings. .2 Identical to .1 except the brass pins are missing. RAAF

Leslie Ernest Shillinglaw was born at Dalmore, Victoria in 1925, the son of Samuel Ernest Shillinglaw and Anna Lucy (Barlow). He was Phillip and Sarah Shillinglaw's grandson. Following his service in the RAAF during World War Two, Leslie married Alva Elizabeth Thomas in 1949. He died in 2007. World War Two Service Veteran Details Name SHILLINGLAW, LESLIE ERNEST Service Royal Australian Air Force Service Number 144902 Date of Birth 03 Aug 1925 Place of Birth DALMORE, VIC Date of Enlistment 30 Sep 1943 Locality on Enlistment HEALESVILLE, VIC Place of Enlistment MELBOURNE, VIC Next of Kin SHILLINGLAW, ERNEST Date of Discharge 01 Apr 1946 Rank Leading Aircraftman Posting at Discharge 36 SQUADRON Prisoner of War No Honours None for displaymarg ball collection, 1943, leslie ernest shillinglaw, second word war, r.a.a.f.

Awarded to Alan Bowers (A236814) who was a R.A.A.F. dental mechanic who serverd during WWII including service in Darwin, and then continued in the R.A.A.F. for some years after the end of WWII The Royal Australian Air Force (and all Commonwealth Air Forces) Long Service and Good Conduct Medal: Awarded to NCOs and ORs of the RAAF (RAF, RCAF etc) for 15 years service. A cupro-nickel plated medal, the obverse features the sovereign's head, the reverse features the crown and eagle emblem of the RAAF (and RAF). Officers are eligible for the award provided they have served a minimum 12 years in the ranks. The riband is dark blue and maroon with white edges. This medal ceased to be awarded in Australia in 1975 when it was replaced by the National Medal (and sbsequently the DFSM and DLSM) in the Australian system of honours and awards. http://www.heritagemedals.com.au/medals-1/service-long-service/air-force-long-service-and-good-conduct-medal.html History of the RAAF Dental Branch It took six years following the formation of the RAAF in 1921 for the first Dental Clinic to be established at Point Cook, Victoria. On 10th June 1927 Flying Officer James Carl Rosenbrock commenced work as an RAAF Dental Officer for the FlyingTraining School at Point Cook. As personnel numbers were still relatively small, Rosenbrock was also responsible for the dental care of all Victorian RAAF units, which involved treating members at 1AD Laverton, as well as Air Force Headquarters at Victoria Barracks in Melbourne. As Army Dental Officers were currently caring for RAAF personnel at Richmond, NSW, the Senior Dental Officer of the 3rd Military District in Victoria (SDO 3MD) requested through the military board that a similar arrangement be established, where that the newly appointed RAAF Dentist provide part time dental services to the Army units stationed at Queenscliff. This was seen as an effective reciprocal arrangement, with both units having a Dental Officer in attendance for, in total, around 3-4 weeks a year. Rosenbrock continued to serve as the sole RAAF Dental Officer until the middle of 1933, when the Air Board asked for his service to be terminated following ‘behaviour unbecoming of a RAAF officer'. He had borrowed several sums of money, of around 40 Pounds or so, from junior ranks on base (as well as from the Regimental Sergeant Major) and had failed to pay the money back. He was replaced by a fellow Victorian, FLGOFF Norman Henry Andrews, on the 18th Sep 1933, who went on to become our first Director of Dental Services, and was instrumental in establishing the organisations and conditions of the Branch that are still present today. Through a fair amount of persistence and hard work on the part of Norman Andrews, the RAAF Dental Branch began to expand from 1937, with the introduction of 2 additional positions, at RAAF station Richmond, and at the FlyingTraining School at Point Cook. This gave the RAAF 3 uniformed Dental Officers, which was expanded to 5 in the months leading up to WW2. 4 of these Dental Officers were based in Victoria and 1 at Richmond, with the other two RAAF units being cared for by the Army (as in the case of Pearce in WA) or by civilians (as in Darwin). With the sudden increase in RAAF personnel required at the outbreak of WW2, the number of RAAF Dental Officers increased dramatically, from 5 in 1939, 28 in 1940, 64 in 1941, 147 in 1942, 193 in 1943, 219 in 1944, and peaking at 227 in 1945. RAAF Dental Officers were required to work in a variety of locations, both in and out of Australia. Between 1940 and 1942 a massive construction programme occurred, with new dental clinics being established around Australia. Priority was given to aircrew training units in order to get these personnel dentally fit for operational deployment, but Dental Officers could equally find themselves posted to recruit depots, fixed stations, medical clearance stations, mobile dental sections, and RAAF and civilian hospitals. RAAF Dental Officers were posted to the large dental centres at Ascot Vale (Vic) and Bradfield Park (NSW) when first appointed, where they received military and clinical training, before being deployed to their needed location. Mobile Dental Units When Japan entered the war in 1941, the rapid deployment of troops to northern operational areas with less than ideal dental fitness was extremely high. As a result, the RAAF deployed a range of mobile dental units, either alone or with medical sections, to support the increasing number of isolated deployed personnel within Australia and overseas. There were three types of mobile unit used: a. Mobile Dental Unit – relied on using either a semi-trailer to get around or by building a surgery directly on to the truck chassis, and installing hydraulic chairs, units, x-rays, and laboratory equipment. They were able to move around between small units, such as RAAF radar stations, where they could plug into the local power supply and work immediately. b. Transportable Dental Units – used for stops of longer duration, where field equipment was carried in panniers from one unit to another by road or rail and housed in whatever accommodation was available at the destination. They were often carried within Australia on Tiger Moths and Dakota aircraft. c. Itinerant Dental Units – in some areas, the dental equipment was installed at the RAAF unit and the Dental Officer and their staff would travel from unit to unit, using the equipment available at each location. RAAF Dental BadgeAs the war developed in Europe, it soon became obvious that the RAF Dental support was not capable of supporting the increasing numbers of RAAF aircrew that were being sent for service with the RAF, with only enough Dental Officers available to provide one to every 2000 men ( instead of the preferred 1 to 600). As a result, the RAAF provided a mobile dental unit, fitted out in a caravan and pulled by a Ford V8 Coupe, to travel around England in support of RAAF personnel at various squadrons. Some degree of tact was needed to ensure that the RAF did not take this as a comment on the treatment they were providing, but it proved successful in maintaining a satisfactory state of dental fitness in RAAF personnel, and a second mobile unit was soon dispatched. They were also set up with a laboratory on board as well as the surgery, which was a major difference between the RAF and RAAF, as the RAF did not provide dentures for their troops (the RAAF would, providing they had served for 6 years). In 1943 the RAF was no longer able to provide Dental support to Australian troops in the Middle East, which resulted in the need for a transportable dental unit to be deployed from Australia. It functioned in a similar manner to the RAF, by moving from one squadron to another. It served in the Middle East and Africa, from Cairo across North Africa, to Italy, and eventually back to England to treat returned prisoners of war. GPCAPT Norman Andrews The growth and development of the RAAF Dental Branch owes a debt to one man in particular, GPCAPT Norman Andrews. As the second RAAF Dental Officer to enlist on 18 Sep 1933, Andrews became the principal architect of the structure and organisation of the RAAF Dental Branch leading up to and during WW2. Until early 1940, the RAAF Dental Branch was administered by the Director of Medical Services (Air), which placed it under the control of the Army Medical staff. The Army would provide their Inspector of Dental Services for advice whenever needed. In April 1940, the RAAF Medical service separated from the Army, resulting in the control of the RAAF Dental Branch shifting back to the RAAF. Andrews became the first Director of Dental Services, when the position was created in 1943 as recognition of the higher profile the Dental Branch was now playing in the RAAF Medical service. Until this time, Andrews's title had been as the Dental Staff Officer to the RAAF Medical Service. Andrews was responsible for the establishment of the war-time structure of the Dental service, establishing new dental centres at all major bases, creating mobile and transportable dental units, ensuring the continual growth of the Branch, maintaining professional development of staff through the establishment of a professional journal, and by organising renowned lecturers to speak at RAAF bases. He also believed in visiting as many dental units as possible to see for himself what conditions were like and to talk first-hand to staff in remote units. His itinerary during the war years, both in and out of Australia, shows a large number of trips in a variety of modes of transport in order to reach remote areas where units were serving. He was promoted to GPCAPT in July 1944, as the numbers of Dental Officers soon peaked at 227 towards the end of the war (1 GPCAPT, 9 WGCDRs, 60 SQNLDRs, and 157 FLTLTs). After the war, with the reduction in RAAF personnel required in uniform, the Dental Branch also reduced its numbers significantly. By 1947 there were only 18 Dental Officers serving (many part-time), with 1 GPCAPT, 1 WGCDR, 10 SQNLDRs, and 6 FLTLTs, and only 13 by 1950. With the decrease in Branch personnel numbers, the ‘powers to be' saw fit to reduce the Director of Dental Service rank to WGCDR, and as a result Norman Andrews found that in order to continue serving in the RAAF he would have to wear a reduced rank. This appears to have been a contributing factor in his decision to discharge at the relatively early age of 43 and accept an administrative job as Director of the Victorian Government's School Dental Service. Norman Andrews holds the proud honour of being the founder of the RAAF Dental Branch, which during the war was instrumental in educating servicemen of the importance of dental health and maintaining the dental fitness of troops in a variety of areas. Dental Orderlies (Assistants) The dental orderly mustering was first introduced in 1937. Until that time, medical orderlies were assigned to assist the Dental officer with their duties. As early as 1931 it had been noted by both RAAF and Army Dental Officers working in Victoria and Richmond that a lot of the troubles they were having would be solved by appointing a permanent Dental Orderly. Often they would find that the medical orderly they were assigned was a different one each day, and as a result the administration and work in general was very inefficient. By 1937, with the increase in Dental Officers to 3, it was realised that a Dental Orderly mustering needed to be created. Dental Mechanics/Technicians Before WW2, dental laboratory work was provided by civilian laboratories, as most RAAF units were stationed around metropolitan areas. At this time, service personnel were still required to pay for their own dentures, unless they had served for six years or had their dentures damaged during performance of their duties. In July 1940, mainly in response to the development of more remote RAAF dental units and the increasing demand for dental prostheses, the Dental Mechanic mustering was established. Unfortunately there was a very limited pool of civilian dental mechanics to recruit from, and as a result the RAAF set up a training school at Laverton (which was later moved to Ascot Vale) in June 1941 which conducted an intensive 6 month course in Dental mechanics. Dental mechanics were quickly in demand. In all fixed and mobile dental units at least 1 Mechanic was supplied for each Dental Officer, and indeed the RAAF supplied Dental Mechanics throughout all its deployments, something the RAF were unwilling, or unable, to do. Two grades of dental mechanic existed: the Senior Mechanic (with the rank of NCO), who was competent in all phases of laboratory work; and the Junior Mechanic, who could only handle routine work and not more advanced denture work. The progression to Senior required a further trade test in techniques including setting up, clasp-forming, casting and backing teeth. During the course of the War, two special courses were held for Mechanics. The first, directed at senior mechanics so that they could instruct others, was in 1942 when Acrylic Resin was first introduced as a denture base material, as an alternative to the current option of vulcanite. Later, towards the end of the War, a ‘refresher' course was provided for those that had served for the greatest period of time in order to allow them retraining in techniques that they had not practised during their service and which were common in civilian life. This included cast base dentures, crowns and bridges, partial dentures, and retainers. Towards the end of the War, a course was held with WAAAF trainees to train them as Mechanics. However, as the War was soon to end they never had the opportunity to progress within the mustering to become Senior Mechanics. The RAAF Dental Branch has survived 75 years of turbulence, with reviews of its viability occurring regularly every few years from as early as 1937. The Branch continues to provide excellent service to the ADF community and, despite reduced manpower, will continue to play an important role in Air Force Health operations. http://www.defence.gov.au/health/about/docs/RAAFDental.pdf40cm cupro-nickel plated medal, the obverse features the sovereign's head, the reverse features the crown and eagle emblem of the RAAF (and RAF). A23814 BOWERS.A. A. F.r.a.a.f long service medal, r.a.a.f good conduct, r.a.a.f. dental service medal

DHC-4 Caribou light transport The Royal Australian Air Force DHC-4 Caribou was a versatile tactical light transport aircraft . Its main operational role was tactical air transport in support of the Australian Army. The Caribou was last operated by No 38 Squadron from RAAF Base Townsville in December 2009. The Caribou is a twin-engined high-wing monoplane with full-span double-slotted Fowler flaps and fully-reversible propellers, which allow it to achieve its trademark steep approach with very short take-offs and landings on unprepared runways. The high wing and distinctive high placement of the tail provide easy access to a large cargo compartment, while the low-pressure tyres permit operation on unprepared runways. It was the last piston-engined aircraft in the Air Force and was our only aircraft to employ the Low Altitude Parachute Extraction System (LAPES), where up to 2000kg of sled-mounted cargo is extracted from the aircraft by a parachute from a metre above the ground. The Caribou is equipped with GPS satellite navigation and night-vision equipment, giving it the capability to operate in any weather, day or night, to either land or drop soldiers and equipment by parachute with pinpoint accuracy. The Caribou is not pressurised and is not fitted with auto-pilot or weather radar. The first Caribou arrived in Australia in April 1964 and they were deployed to Vietnam from July 1964 to February 1972 and carried over 600,000 passengers and a huge quantity of cargo while they were there. Since 1997 the Caribou participated in famine-relief operations in Papua New Guinea and Irian Jaya during Operations SIERRA, PLES DRAI and AUSINDO JAYA, as well as the tsunami-relief operation in PNG in 1999 and operations in East Timor and the Solomon Islands since 1999. Their service life was over 40 years. raaf caribou aircraft

The Australian War Memorial provides the following details about John Stanley Walker: Service number: 418494 Rank: Flight Sergeant Unit: 1 Service Flying Training School Point Cook Service: Royal Australian Air Force Conflict: 1939-1945 Date of death: 23 January 1943 Place of death: Victoria Cause of death: Accidental Source: AWM148 Roll of Honour cards, 1939-1945 War, Air Force .Oil painting on plyboard, framed with stained pine. Features head and shoulders of John Stanley Walker in RAAF uniform with cap.Signed in front bottom left: 'Jos. Schwarcz / Albury / 1943'1943, ballarat college, world war 2, john stanley walker, r a a f, w w 2

The Royal Australian Air Force (RAAF) has operated McDonnell Douglas F/A-18 Hornet fighter aircraft since 1984. The Australian Government purchased 75 "A" and "B" variants of the F/A-18 in 1981 to replace the RAAF's Dassault Mirage III fighters. The Hornets entered service with the RAAF between 1984 and 1990, and 71 remain in operation as of 2017. The other four Hornets were destroyed in flying accidents during the late 1980s and early 1990s.F/A-18 Hornet Jet Fighter replaced the Mirage Jet Fighter. Still in service in 2018.Framed PictureNILf/a-18 hornet jet fighter raaf

A Royal Australian Air Force Discharge Certificate issued to Linley Walter Rogers on the 26th February1946. These Certificates were issued to all service personal on completion of their Enlistment.Rectangular shaped Parchment Discharge Certificate.Royal Australian Air Force Certificate of Service and Discharge with a brief summary of his time in service.raaf, australian defence forces, world war 2, certificate of discharge, air force, lara r.s.l.