Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps

Set of two drawings (BA-T8-8100/1 and BA-T8-8100B) showing the installation of tail lights on SEC tramcars and modifications to the battery/trolley pole relay and battery. Both are dated 15/11/1949 and signed by the Manager Ballarat Branch. The actual relay used later was a Post Office type relay contained within a wooden box.Yields information about the modifications proposed to the tramcars to provide a rear tail light and lights when at a terminus.Drawing - dyeline print on plain papertramcars, safety, tail lights, lights, ballarat

Prior to the launch of the motor powered Queenscliffe, three row boats were in service as lifeboats. This lantern was part of the equipment of the third lifeboat up to 1926.A brass lamp which was part of the safety equipment on board the Third Queenscliff LifeboatBrass Lantern with interchangeable port and starboard glass filters run of kerosene.Brandt Bros Melbourne Manufacturers 422 Elizabeth Streetlight, navigational safety

These types of metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The three railway signalling lamps have local significance as a set donated by a resident of Wodonga who worked for the Victorian Railways, as well as national significance as examples of the communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Set of three painted black metal and glass railway signal lamps used for various purposes during train journeys. The largest signal lamp has circular blue and red glass filters and a turning mechanism on the top under the handle. "A y" on a small copper plate on one side of the largest signal lamp - Lamp 1.railway lamps, signalling lamp, train signal lamps

Metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Exterior casing of a black painted metal railway signal lamp with circular blue and red glass filters and a turning mechanism on the top under a circular handle. Small copper plate with the letters "A y" stamped on it, on one side of the lamp. "A y"railway lamps, signalling lamp, train signal lamps

Metal and glass railway signalling lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Black painted metal signal lamp with a circular metal cover over a clear glass disk at the front and an elongated oval shaped handle at the back. The circular metal cover has a vertical slit in it. There is an inscription on the top of the lamp with the date 1917 and the company name "Eli Griffiths & Sons, Birmingham"."ELI GRIFFITHS & SONS / 1917 / BIRMINGHAM"railway lamps, signalling lamp, train signal lamps, railway equipment

These types of metal and glass railway signal lamps were used for communication, safety and lighting by train guards, shunters and signalmen, as well as station staff in the late 1880s to the early 1900s. They were hand operated and used fuel such as kerosene.The railway signal lamp has local significance as part of a set of three lamps donated by a resident of Wodonga who worked for the Victorian Railways. It also has national significance as an example of communication and safety equipment used by the railways in Australia in the late 19th century and early 20th century.Black painted metal signal lamp with a clear glass lens secured at the front and one thin elongated oval shaped handle showing at the back. The metal appears to be tin plated iron under the black paint layer. There is an oval plate with an embossed inscription on the proper left side of the lamp that is partly covered by the door at the front which holds the clear glass lens. The inscription includes the date 1901."...NARIPPINGILLE STOVE / CO LTD 1901 / PATENT...S & / ...NUFACTURERS / RMINGHAM" on an oval shaped plate on the proper left side, which is partly covered by the door with the clear glass lens.railways wodonga, victorian railways

This type of rectangular dark blue painted metal railway lamp was used by train guards in the Victorian Railways in the 20th century for communication, safety and lighting. It is the same type as the lamp attached to the Victorian Railways guard's leather satchel dated to the 1970s, registration WHS 00074 on Victorian Collections online.The Victorian Railways lamp has local significance as it was donated by a resident of Wodonga, as well as state significance as an example of communication and safety equipment used by the Victorian Railways employees in the 20th century.Rectangular dark blue painted metal lamp with a large handle on the top and a circular glass disk in front of a green filter. The initials 'V.R.' are embossed on the top and both sides. White metal/aluminium rim around the clear glass disk."V.R." on the top and both sides.victorian railways lamps, v.r. lamps, vr lamps, victorian railways guard's lamp, victorian railways equipment

Rose Series postcard No. P 3268, titled "Cathedral Square Melbourne", with a number of W2 class trams in the view. Note the lamp on the top of the prow for the tram stop safety zone. In the view are Flinders Street railway station, Young and Jacksons hotel, Crofts Store, Hostess Showrooms, Yons Cafe with the Sennett's Ice-cream sign and Manon ladies shoes.Yields information about Swanston St. near the intersection with Flinders Lane. 1930'sPostcard - printed real photograph with Rose Stereograph Co. name on the rear. Unused.trams, tramways, w2 class, swanston st, flinders street station

1. Dress Coat - formal jacket style ending at waist. Collar with shawl lapels, shoulder epaulettes and one button fastening front. Red colour wool fabric with red polyester satin fabric lining. Three silver and red colour metal rank insignia - Captain - on each shoulder epaulette. Two silver colour plastic buttons with nursing emblem and shank. Two silver colour plastic lapel badges - oval shaped surmounted by Queen's Crown, oval embossed with 'ROYAL AUSTRALIAN ARMY NURSING CORPS". Centre of oval is Nightingale oil lamp. Across bottom scroll embossed with "PRO HUMANITATE". 2. Waist Coat - vest with two front concealed pockets, red colour wool fabric front, back and lining red colour polyester satin fabric. Front - four silver colour plastic embossed buttons - Queen's Crown, Map of Australia, with shank and metal safety pins. 3. Belt - red and grey colour woven belt fabric with silver colour metal clasp buckle and waist length adjuster. Buckle - circular centre embossed with "ROYAL AUSTRALIAN ARMY NURSING CORPS", SURROUNDING AN EMBOSSED OVAL BADGE - DESCRIPTION AS PER LAPEL BADGES.. Attached to belt end - white fabric manufacturers label.Manufacturers white fabric label - black ink print. "Hobson/ & sons (Lindon) Ltd ........Large".uniform, royal australian army nursing corps

This car is, to all extent, a VF Commodore, but built for the left hand drive market, i.e. The United States. It is an SS, having all the high performance features and safety upgrades of the period, and has an ANCAP 5 star safety ratingBuilt by Holden for the left hand drive marketBlack bodied 4 door sedan with sunroof. 19 inch alloy wheels grille in bonnet with extra grille mounted in bumper along with for lamps. Wind deflector on boot lidChevrolet badge both grille and boot lid centre. SS on boot right hand side.l.h.d., vehicle, chevrolet