Sewing machine, Singer, hand operated by crank handle, rounded wood case with lock on one side. Machine has hinges at back and recessed accessory compartment containing pins and needles. Machine has shuttle bobbin. Singer Trade Marks gold transfers on lid and machine, with Singer badge on front of machine. Serial Number "F1841984" on front right. Serial Number "F1841984" on front rightflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, singer, singer sewing machine, dressmaker, taylor, domestic machines

Allen Twin Cylinder Engine Driving A Brush Electrical Generator Built by W. H. Allen & Co, Ltd ., Bedford, England ( serial Number R1/14738/4) it was used at Kodak Australia, Abbotsford plant , to provide power through the attached Brush Electrical Generator ( serial 21177 of 1929 ) for the photographic plant. Donated by Kodak ( Australia ) Ltd. in 1966Historic - Industrial Twin Cylinder Engine Driving A Brush Electrical Generator used by Kodak Australia, at their Abbotsford plant, Abbotsford, Victoria, AustraliaTwin Cylinder Engine Driving A Brush Electrical Generator made of steel , iron, wrought iron, brassBuilt by W. H. Allen & Co, Ltd ., Bedford, England ( serial Number R1/14738/4)puffing billy, twin cylinder engine, brush electrical generator, w. h. allen & co, ltd

Purchased in Lancashire, England. Arrived in Australia in 1951.Mrs. Popkop[ lived in Box Hill for 27 years , then for 18 years in Scott Street Mitcham before moving to Tweeds Heads in 1998. Mrs Popkop thought she may have had to live in the outback where there would not be any power, hence the hand operated machine.|When we were given the machine it was in very poor condition. Ted Arrowsmith worked on it diligently and finally got it in working condition.|Then we had to get the bobbin to work. As we were not familiar with this type of bobbin, it being the torpedo type, Frances Warren took it to the Ringwood Sewing Centre, 17 Melbourne Street Ringwood and Barry Ford was able to show her how to thread the bobbin..|After a lot of trial and error 2with the tension we finally got the machine to sew a seam. Barry Ford checked the serial no. and authenticated the date of manufacture as 1889.Hand operated vibrating shuttle Singer sewing machine, burgundy with wooden base. Serial no. 8615740Singertextile machinery, sewing, domestic items

The exhibit is the prototype Kingfisher Mark 1 (serial number 23) built by Edmund Schneider Ltd and first flown on 8 July 1956. It was first registered as VH-GDH on 3 May 1957. The ES57 Kingfisher is a small to medium size single seat glider that was designed to have similar control responses to the successful two seat trainer, the ES 52 Kookaburra, thus providing for a smooth transition for solo rated pilots to advance to a single seat machine. Edmund Schneider Ltd built nine Kingfishers and supplied kits for two more for construction by others. Harold Bradley (South Australia) built a modified Kingfisher with shoulder mounted wings. Kingfisher serial number 23 was originally owned by the Waikerie Gliding Club (South Australia) (1956 – 1959). From 1959, it had a nomadic existence in the hands of a string of owners in New South Wales, Queensland, Northern Territory and finally Queensland, again. In the early 1990s the glider was deregistered and flown as an ultralight sailplane. After a change in ownership, the glider was moved to Hervey Bay, Qld and re-registered as VH-GKN. After very limited use, the glider was sold again and placed in storage at Hervey Bay. In January 2004, the owner, who by then had moved overseas, entrusted the glider to Ian Patching and Geoff Hearn who moved it to Melbourne. Ian Patching returned the glider to flying condition in February 2004. Since then, it has been stripped and recovered with new aircraft fabric and requires finishing work. The logged hours flown for the Kingfisher total approximately 190 hours from 549 flights. The glider was donated to the Australian Gliding Museum on 3 June 2014.The Exhibit is one of the Edmund Schneider Ltd gliders that was designed and built in Australia in the late 1950s. It is one of the four Kingfishers that are known to survive – the Bradley Kingfisher and two of the standard Kingfishers are known to have been destroyed – the fates of five are unknown. Single seat high wing wooden sailplane with plywood and fabric covering, in a partly restored condition. Serial number 23australian gliding, glider, sailplane, es 57, kingfisher, patching, schneider

The core memory of this calculator was a #D metal box. The pin must have been attached to a card reader or keyboard to enter the programme. According to Sharp’s serial numbering scheme, which encodes the month and year of manufacture of their electronic calculators at least through the mid-1970’s, this calculator was manufactured in September 1969. The technology used in the Memorizer 30/Memorizer 60 was very typical of that of the late 1960s, with small-scale integrated circuits containing a few gates or flip-flops, and a magnetic core memory array for storing the program steps that the user keyed in using the calculator attached to the device. (with thanks to Rick Bensene, Curator of the Old Calculator Museum, Beavercreek, Oregon, USA) ISharp Memorizer 60 (Model CSA-12). The Model CSA-12, called the "Memorizer 60", was an accessory that could be connected to a Sharp Compet 22 or Compet 32 electronic calculator to allow these machines to be "learn mode" programmed. Programs were "learned" from the keyboard of the calculator, and stored within a core memory array in the Memorizer 60. Programs of up to 60 steps could be stored. The Memorizer 60 could them "play back" the stored steps at high speed, to allow relatively complex math operations to be performed. (http://www.oldcalculatormuseum.com/m-sharpcsa12.html)Serial No. 910 106 09Bcalculator, memorizer 60, computers, programmable calculator, electronic calculators

The lathe-making business incorporated in 1902 as Drummond Bros Ltd originated in the fertile mind of Mr Arthur Drummond, said to have been living at that time at Pinks Hill, on the southern edge of Broad Street Common, west of Guildford. Mr Drummond, whose accomplishments included several pictures hung in the Royal Academy, was unable to find a lathe suitable for use in model engineering. In 1896 he designed for himself a ‘small centre lathe … which had a compound slide rest with feed-screws and adjustable slides’. He also designed and built ‘lathes of 4.5 inch and 5 inch centre height, which had beds of a special form whereby the use of a gap piece was eliminated but the advantages of a gap-bed lathe were retained’. Assisted by his brother, Mr Frank Drummond, who had served an apprenticeship to an engineering firm at Tunbridge Wells, the first lathes were made in a workshop adjoining Arthur Drummond’s house. The demand that speedily built up led to the decision to form a company and manufacture the lathes for sale commercially. Land was acquired nearby, at Rydes Hill, and the first factory built. The enterprise was a success, and the company quickly established ‘a high reputation in this country and abroad for multi-tool and copying lathes, and gear-cutting machines’. Other lathes were added to the range, including the first of the ’round bed’ machines for which the firm became widely known. A Drummond 3.5 inch lathe was among the equipment of Captain Scott’s 1912 expedition to the South Pole, and large numbers of 3.5 inch and 4 inch designs were exported to Australia, Canada and India. By the outbreak of war in 1914, 5 inch, 6 inch and 7 inch screw cutting lathes, arranged for power drive, were on sale. Large orders were received from the government for 3.5 inch lathes, for use in destroyers and submarines, and 5 inch lathes for the mechanised section of the Army Service Corps. The latter were used in mobile workshops. The factory worked night and day to supply the forces’ needs, until production was disrupted by a fire which destroyed a large part of the works in May 1915. As soon as rebuilding was complete work restarted. At the end of the war the entire production was being taken by the Government departments, a special feature being a precision screw lathe, bought by the Ministry of Munitions in 1918. Between the wars Drummond Bros Ltd introduced new machines for the motor vehicle, and later the aircraft industry, and the works were extended on many occasions to fulfill the increasing orders. The Maxicut multi-tool lathe (1925), designed for high-production turning operations, was one of the first machines of this type to be built in England. It was followed (1928) by an hydraulic version for turning gear blanks, and similar work. Further developments provided machines which, during the Second World War, turned all the crankshafts and propeller shafts for Bristol engines. Others, ordered by the Ministry of Supply were employed in turning shells, and many other specific needs of vehicle and aircraft manufacture were catered for by new types of Drummond lathes. Production of the small centre lathes ceased during the war when the company needed to concentrate on building multi-tool lathes and gear shapers. After the war a completely new Maxicut range was introduced, replacing the older versions, and fully automatic. The types were continually developed, and new versions manufactured until the end of the company’s life in 1980. The disappearance from the scene of Mr Arthur Drummond in 1946, and the end of the company’s autonomous existence in 1953 when the company was acquired by William Asquith Ltd, which was in turn bought by Staveley in 1966, meant that the factory at Rydes Hill became one – albeit very effective – part of a large national engineering company. Achievements at the Guildford works during its last years included the development of automated Maxicut gear-shapers in what was ‘probably the most fully automated gear shop in the country’, while a machine from Guildford was sent to the Osaka Fair in 1962. In 1963 an agreement was signed with Hindustan Machine Tools for the manufacture of Maxicut gear-shapers in state owned factories in Bangalore and Chandigarh. During 1963 the two largest multi-tool lathes ever made in the UK were installed in Ambrose Shardlow’s works in Sheffield for handling cranks up to 14 foot long. In 1976 Drummond lathes were included in Staveley’s £14,000,000 installation in Moscow of an automated production line for Zil motor cars. Up to the end invention continued at Guildford: a new Drummond Multi-turn memory-controlled machine was shown at the International Machine Tool Exhibition in 1977. This could not save the works from the pressures of the late 1970s, and Staveley Industries closed its Guildford site in 1980.An early example of a lathe that was designed primarily for the hobbyist model maker. It is in good condition and sought today by collectors as many of it's attributes were innovative at the time and lead to further development and incorporation of some of its features into more industrial models of production machinery. Lathe, round bed, treadle powered lathe, Drummond Type A, Serial number and maker's inscription. 1920-1923, Made by Drummond Brothers in Guildford, Surrey, England. Lathe is complete with Chuck, Tool post and Tail Stock in situ (30 extra parts)"MADE BY DRUMMOND BROTHERS LIMITED - PATENT TEES - RYDE'S HILL n GUILDFORD SURREY", "Serial Number 01470," "L44" or "L45 " flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, lathe 1920-1923, round bed lathe, treadle lathe, drummond type a, guildford surrey, drummond brothers guildford surrey england, tread'e

This chapel organ, or pump organ, was made by the Packard Company of Fort Wayne, USA. It was purchased locally from John Broadwood Shepherd & Son of Liebig St, Warrnambool. The donor advised that it was played for many years in the Winslow Presbyterian Church, southwestern Victoria (on Caramut Road, now a private residence). The serial number of the organ dates to be no older than 1887 and no younger than 1901, according to The Pump Organ Society. The goals of The Packard Company, as quoted from the Fort Wayne Gazette, 6th August 1873 are summarised as such; “In the first place, it was determined to make an organ which should be excelled by none. …. It is interesting to the uninitiated to watch the different processes which literally convert the trees of the forest into the marvellous instruments which sound the praises of God in thousands of churches and Sabbath Schools, or make sweet music in multitudes of homes.” The music store of John Broadwood Shepherd and Son had an “impressive” stand at The Great Warrnambool Exhibition of 1896 – 1897 and received a medal for its exhibit. It was also involved in the community, sponsoring prizes for the Musical and Recital Competition, which was part of the entertainment for the Exhibition. The “Warrnambool Standard” newspaper has reference to John Broadwood Shepherd and Son in a newspaper of 1887 and another dated April 13, 1901. A brief history of the Packard Company: 1850, Isaac T. Packard joined with Nelson J. Foss and Calvin Hatch to form Packard, Foss, & Co., manufacturing reed organs, seraphines, and melodeons 1871 the Fort Wayne Organ Company was formed, and Isaac Packard has 40 shares. 1872 the first organ was completed 5th Sept 1899, “Fort Wayne Organ Company” was officially changed to “The Packard Company” 1908 – 1914 (different dates given) the Packard Company ceased producing organs and specialised in pianos. 1930 company went into receivership 1935 the city of Fort Wayne acquired the former Packard Company property, tore the buildings down and turned it into a park, now known as Packard Park. The organ is significant to local history for being sold by a Warrnambool business and played at a local chape or church. It represents community and religious life in late Victorian times.Chapel organ or pump organ (with stool), dated not before 1897 and not after 1901. Medium brown timber with fretwork and turned spindles, Manufactured by Packard, Fort Wayne U.S.A. Organ was purchased from John Broadwood Shepherd & Son, Liebig St, Warrnambool. Serial number is stamped into the wood, rear of organ. lower right panel. Pedals are covered in carpet and each has the maker's name on the lower part of the pedal frame. The keyboard has five octaves and twelve stoppers.Words on front panel “Packard Organ / Fort Wayne Ind. U.S.A. / JOHN BORADWOOD SHEPHERD & SON, / LIEBIG STREET, WARRNAMBOOL.” Serial Number "48870"flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime village, flagstaff hill maritime museum, maritime museum, great ocean road, pump organ, packard organ, fort wayne usa, john broadwood shepherd & son, john broadwood, winslow victoria, church music, musical instrument, john broadwood shepherd and son, presbyterian church, winslow presbyterian church, the great warrnambool exhibition 1896-1897

Adding machine with thirteen vertical rows of keys with clearing handle on side. Fraction keys on right hand side, and three keys missing along top row. Lever on side of machine. Two short feet at front, two long feet at back, giving slope to machine for ease of use. Serial Number "5-891861" Paper label with "Sets Mess Property" on at back of machine. Serial Number "5-891861" Paper label with "Sets Mess Property" on back of machine. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, adding machine, calculator, office equipment, commerce, business equipment

Part of the equipment issued to service personnel for carrying equipment.Two compass pouches in army camouflage colours. Fold over lid with black button to seal. On back is canvas reinforcement with steel clips. When closing two separate studs on inside to allow for variation in size. Stamped on inside of cover part serial No. and other data. Small stud air hole at bottom.1. Written on inside lid "GRI 480" (possibly "O" is "6".) Stamped inside is serial No. "8465 - 66 - 125 - 3167" also "Trade partners ..Nov 2001". 2. On inside lid stamped Serial No. "8465-66-125-3167" and page 03-96.compass, camouflage, equipment

The one pound note was the most prevalent banknote in circulation with the pound series, with the last series of 1953-66 having 1,066 million banknotes printed. The serial number HK 02 suggests it was printed in 1966.this item is an example of pre-decimal currency used in Australia.A green rectangular paper Australian £1 note. On the obverse is the Australian Coat of Arms and a picture of Queen Elizabeth II facing left. On the reverse are Charles Sturt and Hamilton Hume. The signatories are: H. C. Coombs, Governor, Reserve Bank of Australia and Roland Wilson, Secretary to the Treasury. The watermark is Captain Cook in left oval. Behind each signature is ’ONE POUND’. The serial number is HK 456416 02 currency-australia one-pound-note

Wireless Remote Control Unit A Serial 17284equipment, 1941, army

The Vogt LO150 is a sailplane first produced in 1954. Designed in Germany by Alfred Vogt, the LO150 is of wood construction. It has a two piece wing of 15 metre (49 feet) span and a fuselage of monocoque design. The first of the type to be imported into Australia arrived in late 1955. In January 1956 this aircraft type was used to create a world speed record of just under 75 km/h for speed around a 300 km triangle and went on to win the Australian National Gliding Championships. The Museum’s LO150 (VH-GUC) – serial number EB71 was imported from Germany in 1971 by the late Frank Erdmann and an ownership syndicate formed. Following Erdmann it has had a number of owners. Much of its usage was at Bacchus Marsh and Horsham with excusions elsewhere for competition. This Vogt LO150 was last flown on 3 January 1988. Overall, since arriving in Australia, it has flown 315 hours from 273 launches, which is a commendable average performance of over an hour per flight. VH-GUC was donated to the Museum by Warren Mayfield in 2002. Substantial glue deterioration was discovered in one wing and, as a result, a decision has been made not to restore the glider to an airworthy condition. In due course the glider will be repainted and further prepared for display. This exhibit is an example of the Vogt LO150 semi-aerobatic competition sailplane.Single seat competition sailplane of wood construction.Builder's serial number EB71australian gliding, glider, sailplane, vogt, lo-150, erdmann, mayfield, geelong gliding club

The SZD-30 Pirat was designed by Jerzy Smielkiewicz and first flew in 1966. Over 700 have been produced. The example registered as VH-GYN which was donated to the Australian Gliding Museum by Alan McMaster is one of two that have come to Australia. It carries serial number B-333 and was imported as a new aircraft which was test flown on 29 August 1970. During its logged flying life (last entry 15 April 1990) it was operated in the Northern Territory and Queensland and passed through a number of owners before Alan McMaster at Rockhampton; initially the Alice Springs Gliding Club and then individuals at Charleville and Yeronga in South Brisbane. The aircraft flew 1909 hours from 2073 launches. The log discloses numerous silver distance and duration achievements. The Museum's Pirat sailplane is an example of this popular Polish sailplane type and is indicative of the state of sailplane design in the 1960s.Single seat sailplane of mainly wood construction (some plastic elements) finished in white with green detailing. Sailplane serial number B-333 and registration “YN” australian gliding, glider, sailplane, szd-30, pirat, mcmaster, alice springs, rockhampton

One-pound note, one of a set of four (4) notes published by The Bank of Australasia, Sydney, New South Wales. The obverse of the note is printed in black ink with the denomination and its round pound-coin symbol printed in green ink. There is no printing on the reverse. A black ink stamp is impressed twice on each side of the note, stating that the note is cancelled. Handwritten red ink text is on the note's obverse and pencil text on the reverse. A unique Serial number is printed twice on the obverse. The banknote has a rectangular cut-out notch on the lower edge. The Bank of Australasia was established under the Royal Charter of England. It first came to Australia in 1835, opening in Sydney. The Bank of Australasia was the first bank in Warrnambool. It was established in 1854 and operated from leased buildings in Merri Street then Timor Street. The bank opened its own building on May 21, 1860, on the north-east corner of Timor and Kepler Streets. In that year, the Acting Superintendent of the Bank of Australasia in Sydney was David Charters McArthur. He went on to become the Superintendent 1867-1876. In 1951 the Bank of Australasia amalgamated with the Union Bank to form the Australia and New Zealand Bank, now known as the ANZ. Then in 1970 the ANZ merged with both the ES&A and the London Bank of Australia to form the ANZ Banking Group Limited. The ANZ Banking Group Ltd kindly donated a variety of historic items from the Bank of Australasia. This set of banknotes has historical significance as it was issued by the Bank of Australasia. The Bank of Australasia was the first bank in Warrnambool, established in 1854. The bank continued to operate until its merger in 1951 when it became the ANZ Bank, which is still in operation today. The Bank was an integral part of the establishment and growth of commerce in Colonial Warrnambool and throughout Australia. The banknotes also have a significant place in Australia’s history as two notes are just prior to the Federation of Australia and two notes just after.One-pound note, one of a set of four (4) notes published by The Bank of Australasia, Sydney, New South Wales. The obverse of the note is printed in black ink with the denomination and its round pound-coin symbol printed in green ink. There is no printing on the reverse. A black ink stamp is impressed twice on each side of the note, stating that the note is cancelled. Handwritten red ink text is on the note's obverse and pencil text on the reverse. A unique Serial number is printed twice on the obverse. The banknote has a rectangular cut-out notch on the lower edge.Printed (Serial Number) "O50 551" "ONE POUND" "NEW SOUTH WALES" "1st July 1903" Stamp "BANK OF AUSTRALASIA / CANCELLED" Handwritten in red pen: "undecipherable [initials]" Text in pencil "L24"flagstaff hill, warrnambool, one pound note, bank of australasia, legal tender, £1, banknote, banknotes, flagstaff hill maritime museum & village, shipwreck coast, five poind note, australian currency, shipwrecked coast, flagstaff hill maritime museum, maritime museum, flagstaff hill maritime village, great ocean road, union bank, australia & new zealand bank, anz bank, david charters mcarthur, d c mcarthur, one-pound note, five-pound note, £5, sydney, new south wales, pre-federation, post-federation, currency, set of banknotes, banknote set

Forty page colour magazine with printed text, coloured and black and white graphics and photographs. The front cover shows a colour photograph of three women, two are holding quoits dressed in swim wear and one is seated. The back cover features two colour illustrations of men playing golf. front: [printed] THE MAGAZINE THAT HELPS YOU MOST / Women’s Day / AND HOME / SUMMER CRUISE FASHIONS / Registered in Australia for transmission by post as a periodical. / BIG FICTION ISSUE / Sensational New Serial, “Windom’s / Way,” by James Ramsey Ullman . . / also Complete Novelette . . Erle Stanley / Gardner Mystery. / JANUARY 12, 1953 9D.women's day, fashion, women, magazine, serials, novelette

Galvanometer, Cambridge Instrument Co, England, Serial No 944.

Clarkat A Clarkat Aircraft Tug that has been converted to run on Rails, This Clarkat 'B' was one of 11 machines shipped on 13 April 1943 to the Lathrop Holding & Re-consignment Depot in Lathrop, California. and was used at Jack's Magazine, Maibyrnong, Victoria and later on at Coal Creek Historical Village, Gippsland, Victoria. Clarkat Tug Model C S/N Cx30F Made by Clark Tructractor Div of Clark Equipment Co Battle Creek Michigan U.S.A Serial No. CK 43 470 Code: Heavy Des.Pat. 116092 Historic - Industrial Narrow gauge railway equipment - Jack's Magazine, Maribyrnong, Victoria, Australia Clarkat Aircraft Tug that has been converted to run on Rails, made of steel Coal Creek Tug Clarkat Serial No. CK 43 470 Code: Heavy Des.Pat. 116092 clarkat, clarkat aircraft tug, puffing billy, jack's magazine

Japanese Cavalty Sword. 1899 Pattern, Serial Number 117768.weapon, ww2, army

Humble and Nicholson Ferrier wool press (Serial No. 1141) with associated drive shafts fabricated by Alan Hill of Geelong . Humble and Nicholson Ferrier wool press (Serial No. 1141) parts. Humble and Nicholson Ferrier wool press parts (Serial No. 1141) with associated drive shafts fabricated by Alan Hill of Geelong. Humble and Nicholson Ferrier wool press parts (Serial No. 1141) with associated drive shafts fabricated by Alan Hill of Geelong

Souvenired by Keith David Livingston VX136969 2nd AIF. Refer Cat No 1911P for his service history. .1) Official note of Phillipines - one Peso - Serial No F12020421 VICTORY SERIES. .2) Official note of Nederlande Indies,1 (EEN) Gulden Serial AZ129398 Dated 2 March 1943.currency, notes, dutch, phillipines

a. Triple-valve ratio arm. Sullivan Co. Serial No. 918/1941.

Dark and black cloth covered hard back. Leather spine embossed with 'The Quiver' vol. iinon-fictionVol 2 is part of: The Quiver vol 1 (BBICL001). Page numbers in vol 2 run from 483-952the quiver, serials, stories.

The locomotive was supplied new by Decauville to the Metropolitan Gas Company Ltd, Melbourne, for use at their gasworks in West Melbourne, where it was named Carbon suppied in 1889 (Couillet builder's number 986, Decauville serial number 90). It was named Carbon. The West Melbourne gas works sourced its coal from Maitland, New South Wales, and the coal was brought by ship to a wharf adjacent to the West Melbourne gas plant. John Benn and Carbon were used to haul the coal over a 762 mm (2 ft 6 in) gauge railway from the wharf to the gasworks, a distance of about 450 metres (500 yards). West Melbourne Gas Works No. "Carbon" Wheels: 0-4-0T Builder: Couillet Build Date: 1890 Construction No.: 986 Empty Weight: Unknown Weight on Drivers: Unknown Driver Diameter: Unknown Tractive Effort: Unknown Boiler Pressure: Unknown Cylinders: Unknown Fuel: Coal Gauge: 30 Decauville locomotives The firm Société Anonyme Decauville located at Petit Bourg, France, was founded to manufacture light railways pioneered by French farmer Paul Decauville to transport crops from the field in 1875. Decauville began designing their own locomotives in 1882, although initially manufacture was contracted out to other builders, notably the Belgian firm Hainault at Couillet Although not well known in Australia, in Europe Couillet was a significant builder of steam locomotives of many different gauges and sizes over a long period of time. The locomotive was supplied new by Decauville to the Metropolitan Gas Company Ltd, Melbourne, for use at their gasworks in West Melbourne, where it was named Carbon (986) . Carbon ( 986 ) The locomotive weighs approximately seven tons. It has the Couillet builder's number 986. of 1889 It was built for Decauville & Cie. of Paris, suppliers of portable and industrial railway equipment, and has their serial number of 90 of 1890. Built in 1889 for the West Melbourne site of the Metropolitan Gas Company, it is a four-wheel tank locomotive and was named “Carbon”. It was withdrawn from service in the 1930s and stored until sold privately in 1962. For a few years in the 1960s it was used on a circle of track at Walhalla, before going to the Whistle Stop Amusement Park in Frankston. Although a number of similar locomotives still exist, as far as is known Carbon is the only one still operating in its original condition. Historic - Industrial railways - Metropolitan Gas Company Ltd, Melbourne Steam Locomotive Small Decauville Couillet Steam locomotive. - Iron & wrought iron framesCouillet builder's number 986, Decauville serial number 90puffing billy, narrow gauge, industrial narrow gauge railway, couillet 986, decauville 90, steam locomotive, metropolitan gas company, carbon