This set was given by the Warrnambool City Council Councillors to Horace Lawson on the occasion of his marriage in 1898. Horace Edward Lawson was the son of Susan and Thomas Lawson. The latter at one time had a drapery business in Liebig Street. Horace Lawson was the Town Clerk of Warrnambool from 1893 to 1918. He was a keen cyclist and a member of the Warrnambool Volunteer Artillery Corps. In 1918 Lawson was appointed the Secretary of the Municipal Association of Victoria, a Melbourne appointment. This set is of considerable interest as it was presented to Horace Lawson, notable in Warrnambool’s history as a long-serving and successful Town Clerk. This silver-plated tea and coffee set has four items – coffee pot, tea pot, sugar basin and milk jug. All have the same etched decorative patterns on the sides and the lids and all have handles attached with a nut and a bolt. The tea pot and the coffee pot have the maker’s marks on the bases and there is an inscription on the side of the sugar basin. The lids of the coffee pot, tea pot and milk jug are hinged. ‘W. Mammatt & Sons Sheffield’ ‘Presented to H. E. Lawson Esq. Town Clerk by the Mayor & Councillors of Warrnambool on the Occasion of his Marriage Sept. 1898’horace lawson, history of warrnambool, silver tea set

This door plate was found at 28 Spence Street, Warrnambool by the builder Ray Hollingsworth, when he was renovating the building for the Warrnambool Presbyterian Church in June 2019. He realized that the inscription had been placed there by Leslie O'Callaghan, probably when he left the premises in 1942 after boarding there for some years. Leslie O'Callaghan (1918-2014) was born in Balmoral and left there at the age of 13 with a scholarship to study at Warrnambool Technical School. He became an industrial chemist, working at the Kraft Walker Cheese Factory in Allansford (Warrnambool Cheese and Butter Factory). His experimental work in cheese cultures over a 45 year period was regarded as cutting edge work in the Victorian dairying industry. Known as 'Mr History', Leslie O'Callaghan was also an important Warrnambool historian, serving as president of the Warrnambool and District Historical Society for 35 years. In later life Les wrote about his time in 28 Spence Street, noting the lay-out of the early building and other boarders at the time. He never mentioned the interesting memento of his time there that he left on the back of a door plate. The Warrnambool and District Historical Society Archives Centre is called 'Les O'Callaghan History House'This door plate with its inscription was found 77 years after the inscription was written. It is of considerable interest because the writer of the inscription was well-known in Warrnambool as a bacteriologist and an historian. He left his own personal historical message and by sheer chance it was found years later. (All the old door plates at the time of the renovation were thrown out and it was fortunate that the builder happened to see the writing on one of them and to recognize who the writer was.)This is a cream-coloured ceramic door plate. It is rectangular-shaped with curved edges at the top and bottom. It has been painted white and has two holes at the top and bottom for the insertion of screws for a5taching the plate to the door. The inside of the plate has handwriting in black pencilLeslie Alexander O'Callaghan lived here for some years 1939-1942 AD. His occupation was as assistant bacteriologist for Kraft-Walker Cheese Coy. at Allansford. Born at Balmoral, 40 miles NORTH of Hamilton, Victorialeslie o'callaghan warrnambool, kraft walker cheese company allansford, 28 spence street warrnambool

This fish dish is an attractive household item which would have been used in the early to mid 20th century when the more affluent families in society were entertaining. It is not a common item and most likely would not be seen in households today. This dish has no known local provenance but is of considerable interest as a household item not seen today. It will be useful for display.This fish dish has an electro-plated nickel silver holder with two curved pieces of metal joined at the centre to form a base. There are four round metal balls at each end of the curved metal to stabilise the stand. Four curved metal pieces are attached to the base and hold a rectangular-shaped piece of metal and a handle. Fitting into this piece of metal is a cut glass container which is heavily patterned on the sides and base. The lid of this container is rectangular with rounded edges and silver-plated. The top of the lid has a silver-coloured free-standing fish model attached to the lid by a metal stud. The fish is a little loose on its stand. The handle can be folded down. ‘E P N S 62’ household items, history of warrnambool

Card within Bible from E. PARKINSON, 10 Brooke Crt. Bendigo (M: 041429946620) stating: "Bert WATSON was I believe despatch rider (motorbike) for Sir Thomas BLAMEY carried this bible through WWII. (Was a certificate from View St. Church of Christ)" The Nominal roll shows an Albert Searle Watson No VX1315 enlisted in the 2nd AIF on 26.10.1939 aged 27 years. At discharge from the Army on 4.3.1946 he was serving in 2/8th Field Coy with the rank of Sapper. Brown leather covered bible. Paper, printed and illustrated with colour plates. Page edges gilded; 1152 pages, gilded cross motif on cover.“92 GINGELL ST CASTLEMAINE ALBERT SERLE WATSON A.I.F. ARMY Number VX1315 2/2n FLD COY. R.A.E. & 80 L.A.D. Workshops All Coth Div. A.I.F.”books - religion, religion - christian, bible

Navy blue cover with gilded title. viii, 216 p., [30] p. of plates : ill., 2 maps, ports. Bibliography: p. 208-210.non-fictionAn account of the Volum family, largely Peterhead in Scotland, where they were involved with whaling, but also in Geelong Australia, Ceylon, England and Peru. It has fourteen appendices on a variety of topics plus forty-one illustrations.volum collection, geelong, peterhead, scotland, captain, seafaring, whaling, brewery, paper mill, mission to seafarers

This card together with a log book was a vital record of service for any seaman serving on a Merchant vessel that had been commandeered for War transport work and needed to be validated to ensure eligibility to be taken on as qualified member of the crew. G.W. Duncan appears to have specialised in engine room and mechanical maintenance. He appears to have served aboard a number of vessels including merchant vessels commissioned into wartime service in WW2.Mariner Duncan had a particular regard for the Mission to Seafarers. This plate for display on a commissioned new table at the MTSV chapel acknowledges his bequest and the material donated. Collectively the G W Duncan material includes: photographs, professional data memorabilia and written and commercially printed resources. The memorabilia relates to his career at sea and in particular the role of an engineer, including a handwritten manual of notes and references relating to the mechanical and engineering aspects and areas of responsibility for maintenance. small grey blue printed single fold seaman's photo identity card with printed guidelines and conditions of association / membership.stamped on front cover oval ribbon insignia surrounding roses and surmounted by crown with lettering : Ministry of War Transport Printed at lwr edge: Continuous / certificate of discharge. Inside left cover: seaman photo, name reg number and official stamp with date Inside right page: notes and information.war transport, ww2, merchant navy, merchant seamen, george winfield duncan (1922-2017), g.w. duncan

This photograph was taken at the Mission to Seafarers, Melbourne, from the Celia Little Room looking into the kitchen. It was published in the Port of Melbourne Quarterly (July-September 1959) held in the Mission's archives. The little girl is Rosamond Kent, granddaughter of Padre Oliver.Frank Leslie Oliver served as chaplain at the Mission to Seafarers Melbourne for 30 years from 1930 - 1960, including time served as chaplain with the Royal Australia Navy aboard HMAS Australia. He was a live-in chaplain and was supported by his entire family, including wife Moira, for whom a memorial window exists in the chapel. It shows the contribution of the members of the Ladies Harbour Lights Guild providing the comfort of home to visiting seafarers.Black and white photograph of four women plating up and serving several meals in the Mission to Seafarers kitchen. They are being assisted by a young girl, Rosamond Kent (daughter of Beverley and Robin Kent - Beverley was the only daughter of the Revd. Frank and Mrs. Moira Oliver), who is holding a white jug in her right hand. She is positioned on the right of one of the women, who is on the furthest right of the photograph. The woman on the far right is wearing a string of pearls. The three women that can be seen from the waist up are wearing nice clothes, two with aprons (one is hidden by Beverley Kent). The head of the fourth woman is the only part of her that can be seen as she is positioned behind the woman on the left-hand side.On the back of the photograph there are two names: one is undecipherable and the other says 'Ro Kent' to signify Beverley Kent. There is also a number 5 in the top left corner with what appears to be a tick underneath it.kitchen, food, vinegar, mission to seafarers, celia little room, ladies harbour lights guild, pearls, aprons, plates, jugs, necklace, lhlg, children, rosamond kent

This Christmas Tin with Christmas cake was a Christmas Gift distributed to those serving in the AIF during WW1, 1914.The Christmas Tin was given to someone serving in the AIF during WW1, 1914, it is an original tin.Oblong brass coloured tin with an ornate lid.The lid is ornate in design at the bottom is the inscription - Christmas 1914.christmas tin 1914, ww1, aif

Camera used by No 59 Capt A Chanter, Machine Gun Section, 4th Australian Light Horse Regiment during WW1. The 4th Light Horse Regiment is an ancestor unit of the Regiment, serving with distinction in WW1. The user of this camera commanded the Machine Gun Section of the 4LH. His historically significant collection of photos is held by the Unit History RoomCamera, No 1 Eastman Kodak JRMaker's plate in camera Inside leather case - initials A L Ccamera, ww1, chanter

Doctor Horace Iles Holmes was born at Launceston Tasmania 09/08/1877. He was educated at Launceston High School and Tasmanian University and later at Melbourne University. After graduation he came to Warrnambool in 1905 and worked in the practice of Dr T F Fleetwood and took over the practice shortly afterwards along with the position of Honorary medical officer at Warrnambool Hospital and also health officer until 1944 and as an Honorary consulting medical officer from then until 1958. His practice which was located at " Ierne" opposite the Presbyterian Church in Spence St Warrnambool. He later moved to a new home and surgery at the corner of Spence Liebig st and Raglan parade which was later sold to Dr C B Berryman. A large medical clinic still operates from this site. Dr Holmes was a keen fisherman and a member of Rotary serving as district governor.This plate is a connection to a long standing doctor in the Warrnambool district. In his practice he would have treated many district people and as such this item has strong social and historical connections to the district. Rectangular brass plate engraved with name which has been coloured in black. There are six screw holes around the outer edge of the plaque. The back is plain .H.I. Holmes M.D. Surgeon & Physician. A stamped name at middle bottom edge is unreadablewarrnambool, warrnambool doctors, dr h i holmes, warrnambool history

Irving Buzzard was born in Moonee Ponds in 1897. His study of medicine was interrupted by his enrolment in the AIF in World War 1, where he served on the hospital ship " Kanowns". After discharge in 1916 he returned to his studies, graduating in 1922. he came to Warrnambool in 1929 after purchasing the Cambourne Clinic from Dr Hedley Dunstan. He practised as a GP until the outbreak of WW2. His speciality was gynaecology and obstetrics. He retired from Warrnambool practice in 1964 and moved to Melbourne.he was involved in many different organisations , being a member of local sporting clubs as well as community groups such as Rotary and the freemasons. He died in June 1981.A link to one of Warrnambool's longest serving doctors of the 20th century which has historical and social significance.Small rectangular brass plate with six screw holes. Mounted on timber which is painted brown. Name is stamped and while namDr Irving Buzzardwarrnambool, warrnambool doctors, dr irving buzzard, cambourne clinic doctors

Doctor Egbert Connell worked as an Honorary Medical Officer at the Warrnambool General Hospital and benevolent Asylum from around 1901 and continued until his death on 4th April 1928 from pneumonia. he had a private practice at his house " Ambleside" in Koroit Street Warrnambool opposite the Baptist church. He was highly regarded as being kind and sympathetic towards his patients. His practice was subsequently bought by Dr A E Brauer another of Warrnambool's well known doctors. This glass plate accompanied a stain glass window which was once in the Warrnambool hospital. It was moved to the chapel at Flagstaff Hill. A link to one of Warrnambool's long serving doctors who was involved in the community and as such has social and historical importance.Green glass plate with black text and mounted on particle board and secured with metal clips.A tribute to Egbert John Connell MBBS who for 30 years rendered devoted and valuable service to this institution Obiit April 4th 1928 A Dwarrnambool, egbert connell, doctor egbert connell

This plaque is the name plate of one of Warrnambool's longest serving doctors. Alfred Ernest Brauer came to Warrnambool after graduating from the University of Melbourne in 1927. He initially took up the position as resident medical officer at the Warrnambool Base Hospital before entering private practice. he was appointed honorary medical officer at the hospital and was a life member of the Hospital board , serving as its president from 1952-54.he was a founding member of the South Western Victoria Ambulance service.as vice president, a position he held until his death in 1972.He had wide sporting and community interests including cricket, football, and horseracing. He was a founding member of the Warrnambool Lutheran church and was closely associated with Warrnambool High School and Warrnambool Technical School. he died in September 1972 and was survived by his wife and three daughters. His practice was situated in Koroit StWarrnambool, firstly at Ambleside where he also lived, then later on the other side of the street , in practice with a number of other doctors. A link to one of Warrnambool's longest serving doctors who contributed to the city in a wide range of roles. It therefore has strong historic and social significance.Rectangular brass plaque stamped and infilled with black. A screw hole in each of the four corners.Dr. Alfred Brauer physician & Surgeonwarrnambool, dr a e brauer, alfred brauer, warrnambool doctors, warrnambool doctors 1940-50's, ambleside warrnambool

This plate was presented in 1900 to a Warrnambool lawyer, William Ardlie, on the occasion of his marriage to Maud Taylor. It was recovered from the fire which destroyed the Hotel Mansions building in Warrnambool in 1929. This building was opened in 1890 as the Grand Ozone Coffee Palace (a temperance hotel). It was at the corner of Koroit and Kepler Streets. In 1891 the Coffee Palace was granted a wine licence and in 1895 it was re-named the Ozone Hotel. The building was closed in 1915 and re-opened in 1920 as the Hotel Mansions. In 1923 the Hotel Mansions became a fully-licensed hotel and in 1929 it was destroyed by fire. The present-day Hotel Warrnambool was built on the site. William Ardlie, the son of a pioneer Warrnambool settler, John Ardlie, began practising as a lawyer in Warrnambool in the mid 1860s and dominated the legal scene in Warrnambool, continuing on his practice until he was over 80. He and his second wife, Maud, were occupying an apartment in the Hotel Mansions when it was destroyed by fire and this plate is a relic of the fire. The Warrnambool Bowling Club which presented the plate to William Ardlie, was established early in the 1890s and William Ardlie was an enthusiastic supporter and one-time office bearer.This plate is of great significance as it was one of the few items that still exist that was recovered from the 1929 Hotel Mansions fire and its story contains so much of Warrnambool’s history with its connections to:- 1. The story of the Hotel Mansions, the grandest building ever erected in Warrnambool 2. The story of William Ardlie, a dominant figure in the legal world in Warrnambool for over 60 years 3. The story of the Warrnambool Bowls Club, still existing today. This is a silver plate with an oval base with an inside ring and a rim of scroll patterning. The recessed edges of the plate are highly ornamented with scrolls and flower patterning. Parts of the edge of the plate are missing and jagged as this plate has been in a major fire. On the base of the plate are three silver studs for the plate to rest on a surface. The fourth stud is missing. On the rim of the plate are two small projections, suggesting the plate originally had a handle. On the base of the plate is an inscription.‘Presented by the members of the Warrnambool Bowling Club to William Ardlie Esq.re (ex President) on the occasion of his WEDDING, 10th January 1900.’ grand ozone coffee palace/ozone hotel/ hotel mansions, warrnambool, william ardlie, warrnambool bowls club, history of warrnambool

Belonged to Gwen Asling (nee Avard) Very old Silverplated decorative serving tray and cups for serving boiled eggsSilver plated stand and four cups. Decorative handle in centre, scalloped edge on three decorative legs. Cups have same decorationJAMES DIXON & SONS SHEFFIELDdecorated serving tray .silverplated

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, distant signal, signal, maritime signal, ball signal, signal shape, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, marine navigation, marine communications, communication signal, lifesaving, ship at sea, day shape, masthead signal, day signal, day mark signals, marine technology, safety equipment, navigation equipment, marine day shape, day marker, cane day shape, signal ball, day signal ball, ball signal, ball day shape, distant signal, flagstaff signal, signal station, communications, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This plate, a polished brass altar salver, is part of the original furnishings of St Nicholas Church, Williamstown, Victoria. The church was operated by the Missions to Seamen organisation. The plate is sometimes called a salver, a paten or a communion plate. It is used for serving the communion bread. The plate was presented to the Mission to Seamen, in memory of Kenneth Wyatt McVilly, who passed away on December 4th 1943. The letters on the lip of the plate, A.D.G., stand for the Greek Alpha Delta Gamma, and are used to represent "For the Glory of God". THE MISSIONS TO SEAMEN (Brief History: for more, see our Reg. No. 611, Set of Pews) The Missions to Seamen, an Anglican charity, has served seafarers of the world since 1856 in Great Britain. It symbol is a Flying Angel, inspired by a Bible verse. Today there are centr4es in over 200 ports world-wide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria the orgainsation began in Williamstown in 1857. It was as a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’. Its location was an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000 the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943 a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village, so the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981 and closely resembles the Williamstown chapel. This memorial plate is significant as it is associated with a member of the community, Kenneth McVilly, and was presented in his memory after he died in o1943. This plate is significant historically for its origin in the St Nicholas Mission to Seamen's Church in Williamstown, established in 1857 to cater for the physical, social, and spiritual needs of seafarers. It originated in Bristol, England when a Seamen's Mission was formed in 1837. Plate, polished brass altar salver, or communion plate. It is round with decorative initials in the centre. Outer lip has an inscription of dedication to Kenneth Wyatt McVilly, December 4th 1943. This plate is in our St Nicholas Seamen's Church Collection. “A.D.G. / and in memory of / KENNETH WYATT MCVILLY / December 4th 1943” and initials "I H S"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, religion, church furnishings, mission to seamen victoria, st nicholas church williamstown, brass plate, kenneth wyatt mcvilly, altar salvar, religious service, memorial plate, altar salver, communion plate, paten, communion service, a d g

The Ballarat Junior Technical School opened in 1913 as a division of the Ballarat School of Mines. The first location was the Dana Street Primary School, and the first principal was Albert W. Steane. In 1921 a custom built building was erected on the grounds of the Ballarat School of Mines. A number of the students enlisted in the Australian Infantry Forces (AIF) during 1913, 1914. They were Robert Borradale, Albert Burge, Howard Bennett, Norman Carmichael, Reginald Crick, Herbert Collins, Frances Davis, Arthur Dixon, Frank Edwards, George Gilbert and Sydney Townsend. Frances Davis was killed while serving. Those who enlisted have been remembered with an Honour Board with their names. This is at SMB.Book is charcoal blue cloth on hard cover with red leather spine and corners. End papers are brown/grey "stone" patterned thick gloss paper. Name of school and type of book stamped on gold on the spine - REGISTER, BALLARAT JUNIOR TECHNICAL SCHOOL" It is the first Ballarat Junior Technical School Roll Book. The book includes handwritten names, age, date of birth, address, school last attended, grade, qualifications, date of entry, cause, results and remarks. The remarks includes workplaces, whether they joined the AIF, etc. Records A.I.F. service. 309 Trompf, Percival Albert 344 Moy, Richard James E. 376 Serjeant, Robert M 380 Tippett, Edgar John T. 447 Skilbeck, John E.Book plate on inside of front cover. "BERRY, ANDERSON & CO Bookbinder Lydiard St and Dana St Ballarat" Reordering information and reference number given - 24176ballarat school of mines, ballarat junior technical school, roll book, enrolments, albert steane, a.w. steane, albert w. steane, trades, apprentices, world war one, alchin saddlers, ronaldson and tippett, newport workshops, ballarat brewery, cutter coachbuilder, ballarat woollen mill, jelbart's foundry, eureka pottery, robson's leadlighter, long's biscuit factory, a.i.f. service, enrolment register, ballarat junior technical school enrolments, john dufler, robert borradale, albert burge, howard bennett, norman carmichael, reginald crick, herbert collins, frances davis, arthur dixon, frank edwards, george gilbert, sydney townsend

James Dixon & Sons were founded in 1806 in Sheffield and were one of the major British manufacturers of the Industrial Revolution. They were manufacturers of pewter ware, electroplated Britannia metal, silverware, and electroplated nickel silver. Their products included hundreds of items for use in the kitchen (e.g. bowls, cutting tools) and the dining room (e.g. tea services, cocktail shakers, and mixers) as well as items such as candlesticks. They were a world leader in manufacturing shooting accessories through the nineteenth century and exported powder flasks in large quantities to America, They were known as whistle makers, which like most of their products were of outstanding quality. They were located first at Silver Street (1806), Cornish Place (1822) Sheffield. Their registered trademark since 1879 was a Trumpet with a Banner hanging from it. Although registered in 1879, the "Trumpet with Banner" logo was used at times before registration and appears on some of their silver plate pieces. They were one of the foremost names in EPNS and sterling silver tableware including silver tea services and hollowware pieces. They also made silverware serving pieces and had a wide catalogue of patterns. Their tea sets and hollowware pieces produced in silver are now very valuable as antiques. The firm continued to be a family-run enterprise until 1976. The patterns are currently owned by another Sheffield firm that exports products mainly to the Middle East.An item made for domestic use late19th to early 20th century by a renowned maker of pewter and silverware products. These types of products give us a snapshot into domestic and social life during the time it was made.Pewter Cloche or cover for food ornate handle at top. Ring on one end. Number 399 inside lid & Dixon & Sons Sheffield.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pewter ware, james dixon, silver ware, kitchen cutlery, britannia steel, food cover, cloche

This three-dimensional Distant Signal is part of a Flagstaff Signal set of ball, cone and drum shapes. It has been woven and then fabricated with strong metal swivel fittings and loops for suspending from a high point on a flagstaff at a signal station or on a ship’s masthead. The cane signal was constructed to withstand all weather and to be visible from a long distance. The gaps between the woven cane allow air to pass through, minimising possible swaying. Similar sets were made from rope or fabric. Warrnambool's Flagstaff was erected in 1854. Its primary use was to display visual signals that could convey messages between land and sea. It was also used to notify the local population of the approach of ships. One of the popular signalling codes in use in the early-to-mid 1800s was the Marryat’s Code but there were others in use as well; there was no one standard code. In 1857 the International Marine Conference adopted an International Code of Signals as a standard communications system for all vessels that could be understood in many different languages. The Normanby Advertiser reported on June 5th 1857 a query from the Post Master General as to whether the request of the Chief Harbour Master would be carried out, in that Warrnambool would receive a new flagstaff and a set of Marryatt’s signal flags. The Table of Codes was published, showing how to use combinations of these flags to send messages. The Code was revised in 1887 to cover situations where distance, light, wind and weather conditions affected the visibility of the flags and prevented clear communication. The first report of the International Code of Signals Committee of 1897 warned signalmen not to rely on ordinary semaphore flags and introduced a Distant Signal Code using either particular semaphore flags or the three-dimensional shapes of a ball, cone and drum that aligned with the semaphore flag shapes of a circle, pennant and square. International Code of Signals In 1931, after World War I’s experiences in using signal codes, the International Code of Signals conference in Washington revised and published the rules for the conduct of signalling. One of the changes was that “the use of the Distant Signals and of fixed semaphore was abandoned”. It is of interest to know that modern marine law in many countries insists that a set of Day Shapes must be carried onboard vessels of a certain size. These highly visible geometric shapes are used at sea in daylight to communicate messages between vessels. They are used in a similar way to the Distant Signals, in that different combinations of shapes represent different messages. The set of shapes includes a ball, cylinder, cone and diamond. The shapes are hung between the top of the vessel’s foremast and the front of the vessel. They are only coloured black and are about 1.5 metres high. The vertical line of shapes can mean messages such as Boat not under command, Fishing, and Under sail and power.Distant Signals were an important means of marine communication from the late 1880s to the early 1930s, including during World War I. They were an advancement to the International Shipping Codes and safety. The cane signals’ shapes appear to be the same from whatever direction they are viewed, removing confusion about the message they convey. The same shapes continue to be used today for the sets of Day Shapes used as marine navigational signals that are mandatory on certain-sized vessels.Distant Signal Ball, part of a Flagstaff signal set. A round woven cane ball, painted black, with a metal rod passing through the centre. The rod has a loop at each end, then a concave, octagonal metal plate that rests on the outside surface of the ball, serving as a washer. The rod has swivels at each end.distant signal, flagstaff signal, signal station, masthead signal, communications, marine technology, signals, marine signals, flaghoists, international marine conference, international code of signals, signal codes, marine safety, signal flags, day shape, daymark, day symbol, navigation, warrnambool flagstaff, 1854, 1857 1931, 1887, 1897

This butter or cheese knife is a decorative example of electroplated cutlery that had become an affordable alternative to more expensive silver cutlery in the late 1800s to early 1900s. The knife has stamp marks in the back of its handle that are a combination of letters and symbols used by British silversmiths to identify their workmanship. The design and type of this knife was not normally used by everyday people but rather those of a higher social class with time and money to have a particular decorative knife to serve butter or cheese. The marks on the handle tell that it was made of nickel silver, and electroplated with superior quality Stirling silver. The Barker Brothers of Birmingham made the knife between 1885 and 1907, but most likely before 1895. It was made for the British, or British colonial, people, connected with a government department such as the navy or defence. This story may be slightly inaccurate, as some silversmiths added extra ‘pseudo marks’ to their wares to disguise the quality. THE MARKS and their meaning – - ‘A1’ The silver used in electroplating this knife was the highest level, ‘superior quality’, measured in grams of silver per table spoon or table fork, with ‘A1’ being 2 2/3 grams, and ‘D’ being 0 1/2 grams of silver. - ‘BB’ The Baker Brothers used these initials from 1885 to 1907. - ‘[crown symbol]’ – This symbol is used for Sterling silver but this knife is a metal alloy. The crown is also the town mark of Sheffield (appointed by the Sheffield Assay Office) but this knife was made in Birmingham, which has the town mark of an anchor. The Barker Brothers may have added the crown mark to this electroplated silverware as a ‘pseudo hallmark’, leading the buyer to think that it was actual Sterling silver. The use of pseudo hallmarks by electroplaters of the Victorian era was common practice but it was illegal. In 1895 the unlawful practice was seen as imitating the Sheffield Silver Mark and the law was firmly applied to eradicate the deception, so items with this mark probably date before 1895. - [EPNS] Electro Plated Nickel Silver, called nickel silver or German silver, is a metal alloy that usually combines copper, nickel and zinc (60 percent copper, 20 percent nickel, 20 percent zinc). It has a silver-white appearance and is sometimes referred to as ‘white ware’. It does not contain any silver but is often used as a base for electroplating, when the item is covered with a thin layer of silver to give it the polished appearance of pure silver. It became popular in the late 19th and early 20th century as an affordable substitute for sterling silver. - Broad Arrow - an official stamp that indicates it was once the property of Britain government, either in Britain or one of its colonies, and used in the defence force. In Great Britain, from an 1875 government act, it was, and still, is a crime to forge or wrongfully use, the broad arrow symbol. The BARKER BROTHERS of Birmingham - Barker Brothers were one of the earlies firms of Birmingham silversmiths, established in 1801 by Mary Barker. They became Barker & Creed, then William and Matthias Barker, then from 1885 they were the Barker Brothers. They were operating in Paradise Street in 1871 until in 1903 they moved to Unity Works, Constitution Hill, in Birmingham. The firm also had a showroom at 292 High Holborn, London, from the early 1900s to the 1980s. In 1907 the firm became Barker Brothers Silversmiths Ltd, then in the 1960s they merged with Ellis & Co, becoming Barker Ellis Silver Co. Ltd. In 1979 they were registered in USA as Ellis & Co., Barker Ellis, and Ellis Barker. The business went into administration in 1992, after almost 200 years of production. The firm advertised as specialists in electroplating, and used the trademarks BRITANOID, UNITY PLATE and THE HYGENIA.This knife is historically significant, dated from 1885 to 1907 but most likely pre-1895, and made by the longstanding Birmingham silversmiths, the Barker Brothers, established in 1801. The knife is an example of decorative flatware used by people of ’class’. It also has the broad arrow stamp, connecting it to the British government, in particular the ordinance department. The stamp also connects it to other items in our collection with that stamp. It may have been connected to pre-Federation government organisations and officials such as the army Garrison, government naval vessel, police, lighthouse keepers, harbour masters. The knife is the only example of its kind in our collection, being a decorative silver butter or cheese knife, made by the Barker Brothers of Birmingham. Butter knife, or cheese knife, electroplated nickel silver (EPNS). Upper blade edge has decorative shape and engraved motifs, lower blade edge is bevelled to a cutting edge, and narrow plain handle flares out to a wide, rounded end. Maker’s marks are stamped on the reverse. Made by Barker Brothers of Birmingham in the late-19th century. Stamps: “flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, butter knife, cheese knife, electroplate, electro plate, nickel silver, nickel alloy, alloy composition, copper nickel zinc, german silver, epns, barker brothers, birmingham, london, silversmiths, victorian era, 19th century, a1, bb, crown inside square, broad arrow, flatware, tableware, cutlery, cutler, dining utensils, eating utensils, superior quality, pseudo hallmark, stirling silver, silver-white metal, mary barker, barker & creed, william barker, matthias barker, barker brothers silversmiths, barker ellis silver co, ellis & co, barker ellis, ellis barker, britanoid, unity plate, the hygenia, british, colonial, government use, defence department use, naval use, knife, serving knife

Sent to his mother from Ron Fraser when he was serving in the South West Pacific during WWII. The resin for the brooch came from the windsheid off his areoplane.Silver or silver-plated brooch, oblong with pin on back on a scroll shaped link attached. The bottom part is a silver double heart shape stuck onto a blue resin backing, also double heart shaped.Etched on top part: SW Pacific / 1944 - 5 Etched on the bottom part: To/ Mother/ with SWP/ Love 1945world war 2, costume accessories, jewellery

Donated by Sir Henry Newland.The samovar stands 41cm high, and is 39cm wide across the handles. It is made of Sheffield plate, and dates from the late 18th century. It is supported on a square base with four cast lion’s feet attached by elaborate mounts at the corners. The main vessel or tank is circular, and set on a short columnar stand. These elements are heavily fluted. There are two elaborately decorated solid cast silver handles attached to the sides of the tank. A long spout with a cast ivory handled tap extends from the bottom of the tank. The lid is plainer, with a fluted and scalloped edge, and is capped with a finial. Inside the tank is a cylindrical immersion container for hot coals, a primitive type of heating element. There is a crest, probably that of the original owner, engraved on the shoulder of the tank above the tap. A samovar is a Russian tea urn but the College’s samovar is not a tea urn, as it does not include the stand or the teapot. Undoubtedly it was intended to provide hot water for tea, and the absence of a matching teapot indicates a cultural difference between the English and the Russians, in the way in which they went about brewing tea. It is a showpiece, intended for use and display in the reception rooms of the house. In the 18th century tea was still a rare and exotic import from the Orient, so the serving of tea was an important act of hospitality and a statement of social status.Sir Henry Newland was the College President 1929-1935Antique sheffield plated samovar with shell design and pressed rib border, finely worked casted handles, spout with swivel top, with tapered centre column, square shaped base with cast lions feet

This brass registration plate was once attached to the former Sunshine District Community Hospital in King Edward Avenue, Albion, 3020. The hospital, under several names, served the local community since the 1920's. It became the Sunshine District Community Hospital in 1946 and was closed in 1989. The building was demolished and replaced by residential units. The plate was preserved by Carol Duvall a long serving nurse, who about 20 years later donated it to the Sunshine and District Historical Society.This brass plate is a rare physical relic of what was once the main hospital serving the Sunshine area, and in which many local babies were born.Tarnished brass plate with indented or carved lettering finished in black paint. The black paint is showing signs of deterioration. The plate has six holes for attaching it to a wall, and two of the corners have been bent probably during the removal of the plate. There is also a small amount of paint contamination on the edges.REGISTERED OFFICE / SUNSHINE DISTRICT COMMUNITY HOSPITALbrass plate, registered office, sunshine district community hospital, king edward avenue

This piece of functional Trench Art was made by Stewart Noble during World War 2 (circa 1940) while serving on a Mine Sweeper among the Pacific Islands. It is believed that the bullet spoon was chrome plated after the war, while he worked at the Government Aircraft Factory. Trench art is described as any decorative item made by soldiers, prisoners of war, or civilians where the manufacture is directly linked to a war. The making of trench art was a popular past time during leisure hours at the front, where skilled military personnel created the items. Common examples of trench art are decorated shell and bullet casings, and items carved from wood and bone. Trench art has been in existence since the Napoleonic wars however it was most common during World War 1, and to a lesser extent during World War 2. This bullet spoon has historic significance because it is an example of the type of functional or artistic small items, that were made from war scrap during spare time by soldiers or other personnel associated with a war. This particular item indicates that a reasonably high degree of skill was required to make the bullet spoon.Chrome plated teaspoon with a discharged .303 bullet for the handle.trench art, bullet spoon, .303 bullet, stewart noble, war souvenier, chrome teaspoon