This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Working Dress (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The short waist length jacket consists of a jacket has a lapel collar and zip front, with two external chest pockets and exposed pocket flaps, There are portlets on each shoulder that are fastened with a black plastic button. This button has a crown over eagle in flight on the front. Rank slides are slid onto these portlets and this jacket has Squadron Leader rank slides on the portlets. is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. The waist belt is part knitted on the sides and cloth on the front and rear. There is also one interior pocket on the right side below the exterior breast pocket. Maker: Australian Defence Industries The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This object is one of a three piece set. There is also a pair of trousers and a defence leave ticket which are associated with this object. The three chevrons on the sleeve signify three years of service. The unit patch may denote that the wearer was part of the Army Serice Corps Divisional Unit one. The associated ticket shows that the serviceman was at some point travelling in uniform on defence leave in a first class carriage from Spencer Street to either Moreland, Newmarket, North Carlton, Northcote or Westgarth.As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Woolen khaki jacket with button-up front. The top button is a plain brown plastic button. The lower four buttons are identical embossed dark brown metallic buttons. They depict an image of Australia in the centre with a crown above. Encircling this image are the words "Australian Military Forces". There is also a metallic clip at the waist-band and a metallic stud below the row of buttons. There are four button-up pockets on the front of the jacket. Two of these are breast pockets and the other two sit directly beneath these. There is also an interior pocket on the lower right section of the jacket. The lower right exterior pocket is missing its button. There is a spare button in the right breast pocket. All of these pocket buttons are of the same type as the decorative dark brown metallic buttons. There is also a spare unit patch in the bottom right pocket. The two cuffs are buttoned up with one decorative dark brown metalic button each. There are two identical brass badges on either collar. They depict a crown in the centre with the rising sun surrounding it and ribbons below with the words "Australian Commonwealth Military Forces". There are two identical brass badges on the shoulder edges of the epaulettes depicting the word "Australia". There are two buttons that fasten the epaulettes to the jacket near the neck which are of the same type as the decorative dark brown metallic buttons. There are two identical felt unit patches on either section of the upper arms. They have a light blue border surrounding a navy blue rectangle above a white rectangle. There is also a felt chevron just above the cuff on the right arm. This depicts three blue stitched arrows on a khaki/green background. There are also two labels stitched to the interior of the right breast pocket. Ther are two white rectangular labels that are stitched to the interior of the right breast pocket. These have inscriptions. There is also a stamp on the interior of the lower right pocket.Inscription on the two interior Labels: REGIMENTAL No........./ NAME........./ V.162 / MADE IN AUSTRALIA / 1942 / SIZE / (within a rectangle the number “26”) Stamp on the interior of the lower right pocket inscription: W.W. ( and what appears to be an upside-down W above thesearmy, uniform, jacket, army service corps, asc, divisional unit one, division one

This 236 page, full-colour hard copy reference work, catalogues the metal insignia embellishments used by all Corps and Schools of the Australian Army (including philanthropic organisations), from 1953 through to the present. The book provides images of the front and the back of a given (metal) insignia set for each Corps etc. Each image set depicts the relevant hat badge, collar badges and epaulette title and/or cloth shoulder title applicable. The book's images record three distinctly different 'generations' of insignia manufacturing methods/types, including the: gilt brass and white metal items used in the 1953 to 1964 period; and anodised aluminium 'StayBright' insignia introduced as from 1964[ and 'BriteShine' insignia introduced with effect from 1997 (running through to the present). The full colour photographic images in the book are complimented by written descriptions which cite each item's distinguishing characteristics... including measures of: typical weight, height, width and thickness (at a given point). A discussion of copies and faked items is also provided, including microscope resolution images of 'tell tale' signs to look for. The entries in the book are organised alphabetically and match those used in the Authors' 614 page eBook version of this work (the eBook is a separate edition which provides scalable images of all relevant insignia and many manufacturing variants).The hard copy and electronic editions of this work are able to be used either separately or concurrently, as and when users require. Regards Mark Corcoran & Arthur Butler The Authors charlibravobooks.com Re: Copyright As the original authors we hold the sole copyright authority to sell this work. This item does not infringe on any copyright, trademark and/or intellectual property rights and we hold specific written publication approval from the Australian Defence Force. Soft cover, spiral bound 235 pagesaustralian army, post ww2 insignia

This 305 page, full colour hard copy reference work, catalogues the series of metal uniform embellishments used by Units and Regiments of the Australian Army, from 1953 through to the date of publication. The book provides images of the front and the back of a given (metal) insignia set for each Unit or Regiment operating within the Australian Army since 1953 (including abolished formations). Each image set, depicts the relevant hat badge, collar badges and epaulette title and/or cloth shoulder title applicable. The book’s images document at least three distinctly different ‘generations’ of insignia manufacturing methods/types, including the: gilt brass and white metal items used in the 1953 to 1964 period; and anodised aluminium ‘StayBright’ insignia introduced as from 1964 and ‘BriteShine’ insignia introduced with effect from 1997 (running through to today). The full colour photographic images in the book are complimented by written descriptions which cite each item’s distinguishing characteristics… including measures of: typical weight, height, width and thickness (at a given point). A discussion of copies and faked items is also provided, including microscope resolution images of ‘tell tale’ signs to look for. The entries in this book are organised alphabetically and are consistent with those used in the Authors’ earlier publications (ie. the 614 page eBook version of Volume 1, as well as with the 236 page ‘Concise’ hard copy Editions of Volume 1). australian army insignia, post ww2 insignia and badges

Bag leather for mail with "Mailman's Loose Bag" stamped into flap."PMG" stamped under flap. Flat pouch-type bag with buckle and strap fastener & long shoulder strap.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This false waistcoat was part of the formal wear worn by men c 1960 . The two breast plates extend to the shoulder with wide lapels, a small pocket and 3 buttons for fastening at the front.The Breastplates are fastened at the nape of the neck by buttons on a thin strip of cotton. This false waistcoat is typical of the type of outfit that men used c 1960 for attending formal occasions in Melbourne Man's White false waistcoat for formal wear consists of two starched breast plates with wide lapels attached by 3 buttons on a thin band that passes under shirt collar . The breastplates are fastened at the front by 3 buttons ENGLISH MADE / FOR / THE WEST END SHOP / MYER / EMPORIUMclothing, formal wear, dress shirt, tuxedo, waistcoat, maynard dennis, city of moorabbin, freemasons lodge, city of moorabbin historical society, early settlers, market gardeners, bentleigh, cheltenham, moorabbin,

This ink bottle is ‘boat’ shaped, which was a common design from the mid-1840s. It was crudely made; maybe it was rejected as a practice bottle or perhaps heat or pressure has distorted it. The bottle was recovered from the wreck of the Inverlochy and is part of the John Chance collection. Ink in the 1700s ink could be purchased in powdered or block form from apothecary shops, to be mixed with water as needed. Then in the mid-1800s chemists began selling ink in liquid form, in small, inexpensive and often attractive bottles. The small glass ink bottles were handmade, blown into a cup shaped mould, and sharply broken off from the blow-pipe at the neck, referred to as the English-made ‘burst-off’ finish. The neck was then filed, filled with liquid ink and sealed with a cork or wax. It was a quick, affordable container and made pen and ink writing available to the public. The name ‘penny ink’ bottles was a common title due to their low cost. INVERLOCHY 1895-1902 - The Inverlochy was a steel sailing barque built in Scotland in 1895 for international trade. In 1902 the Inverlochy left Liverpool under the command of Captain E.R. Kendrick. There were 21 officers and crew and the captain’s wife Mrs Kendrick, on board, bound for Australia with cargo that included tools, chemicals, liquor (beer, whisky, stout, rum, and brandy), steel, iron, wire netting, hoop iron, tinplate and pig iron), and steel wire for the Melbourne Tramway Company, tiles, soap, soft goods and earthenware. On December 18 almost at their destination, the Inverlochy ran aground on Ingoldsby Reef at Point Addis, near Anglesea. The crew and passengers left the ship via lifeboat and landed at Thompson’s Creek, then walked about 20 kilometres to Barwon Heads. Salvagers were interested in the 10 miles of cable in the hold. Mrs Kendrick’s ‘high grade’ bicycle was amongst the items salvaged but she lost her jewellery and two pianos. By February 1903 the ship had broken up and objects such as bottles and casks of liquor were washed ashore. Bad weather shook the wreck in June 1903, causing the ship’s spars and figurehead to be washed ashore. This boat shaped handmade ink bottle is historically significant for its association with communications and record keeping in the mid-to-late 19th century. The bottle is socially significant as an example of making a useful product affordable to every day people. This handmade glass ink bottle is significant for its connection with the John Chance Collection, which is historically significant as an example of artefacts from wrecks that had been lost in the coastal waters of Victoria from thirty to over one hundred years before John Chance and others discovered them. These artefacts are a sample of goods carried as cargo or personal possessions, and of ship hardware of that era. The ink bottle is significant through its connection with the barque, Inverlochy, The Inverlochy is significant for its cargo, which is a snapshot of the array of goods imported into Australia at the turn of the 19th century, including cable for the Melbourne Tramway Company. The Inverlochy is historically significant and is registered on the Victorian Heritage Database, VHR S338. The wreck of the Inverlochy is important as an accessible dive site that shows the remains of a large international trading vessel and its contents. It is valuable for an insight into Victorian era of shipping and maritime history.Ink bottle, thick clear glass, rectangular base with small round mouth, long sides have have a U shaped groove along the shoulders (used for resting pen handles). The outside surface has a white clay-type reside over it. Bottle is very bent and distorted. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, inverlochy, scotland, captain e.r. kendrick, melbourne tramway company, tramway cable, ingoldsby reef, point addis, anglesea, thompson’s creek, barwon heads, boat ink bottle, cottage ink, penny ink, glass ink bottle, pen rest, writing accessory, victorian, antique, ink well, sheer lip, distorted body, handmade, mould blown, statoionery

This olive green bottle was handmade by a glassblower and is the typical shape of a ‘gallon’ type liquor bottle, which has the capacity of one-sixth of an imperial gallon, about 750ml. It was made around the mid-to-late 1800s. The bottle was recovered from an unnamed shipwreck in the coastal water of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing into a long metal pipe or reed with a blob of molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another tool to finish the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be added to the top to form the mouth and lip of the bottle. The seal was usually a cork, often held in place with tape. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal water in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, dark olive green glass, tall thin Gallon type. Lip is double; rounded upper, flared lower. Neck is slightly bulbous. Body has shoulder seam, then tapers inwards to base. Concave base with small pontil mark. No inscriptions. Handmade in mould. Body has sediment inside, top to bottom. Glass is worn down one side. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, olive glass, green glass, mould, 1800s bottle, bulbous neck

This olive green bottle was handmade by a glassblower and is the typical shape of a ‘gallon’ type liquor bottle, which has the capacity of one-sixth of an imperial gallon, about 750ml. It was made around the mid-to-late 1800s. The bottle was recovered from an unnamed shipwreck in the coastal water of Victoria. It is part of the John Chance Collection. This bottle has a pontil mark in the centre of the base and four pontil marks around the heel. It also has tape around its mouth and lip, adding a little more interest to its history. Glassblowers made bottles like this one by blowing into a long metal pipe or reed with a blob of molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another tool to finish the base. The tool that the glassblower or his assistant used to steady the bottle left four marks in the heel of the bottle. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be added to the top to form the mouth and lip of the bottle. The seal was usually a cork, often held in place with tape. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. This bottle is a little more significant than other similar bottles in our collection because it has multiple pontil marks, four around the heel of the base as well as one in the centre of the base. These marks were left by the tool or tools used to hold or steady the bottle as the maker completed the process. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal water in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, dark olive green glass, tall thin Gallon type. Applied mouth with remnants of tape around lip. Lip is straight and narrow. Low shoulder seam; glass above seam has more shine than below seam. Body tapers gently inwards to base. Rim of heel has four equidistant pontil marks. Base is concave with central pontil mark. No inscriptions. Handmade bottle. Sediment inside bottle on one side, top to bottom. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, olive glass, green glass, mould, 1800s bottle, multiple pontil marks

This broken, handmade black glass bottle was made around the mid 1800s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is now part of the John Chance collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late-1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to be made in a dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body was blown, the glass blower continued blowing free-form (without the mould) to form the shoulder and neck, then the base was pushed up with a pontil tool, and the finish for the mouth was added. The dip mould gives the body a slightly textured surface, with the free blown shoulders and neck usually looking smoother and shinier. A horizontal line can often be seen around the shoulder where the mould of the body meets the free-blown shoulder. A lump or mark in the centre of the base, called a 'ponty' mark (named after the pontil tool), is also common on this type of bottle. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. (Similar bottles were recovered from the 'Loch Ard' shipwreck, lost in 1898.) The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, thick black glass (dark olive) with matt surface. Mouth has been broken off, leaving sharp edges. Short neck, wide shoulders, body tapers slightly inwards towards base. Wide uneven heel and deep concave base with a fold line in glass. No visible seams.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, bottle, black glass, antique bottle, handmade, mouth blown, blown bottle, liquor bottle, ale bottle, 19th century bottle

Mauve and white abstract patterned, silk shirt maker styled dress. Extended shoulder to form elbow length sleeves. Triangular gusset at underarm. Large revere collar, which extends into a cross-over type front (no visible fasteners). Self fabric belt with covered buckle and loops. Five knife pleats at front-facing to centre front, on each side of front. Four knife pleats each side of centre back. Zip placket at left hand side. Garments from the Executors of Estate of late Frieda Kahland. See also 11400.122, 11400.363, 11400.365, 11400.366.costume, female, mauve/white silk shirt style dress

Small head and shoulder portrait of a lady. The portrait is very pale. She is wearing a dark dress with a wide lacy collar and a brooch at the neckline. She is wearing a lacy type of hat. Photo mounted on cream card with rounded corners and black printing on the front and back. The back has a Coat of Arms and printing: - By Special Appointment. Photographer to His Excellency the Lord Lieutenant of Ireland and patronized by H. R. H. The Prince of Wales and H. R. H. the Duke of Cambridge. Date printed on the back is 1887.J. T. Haden, 255 Broad Street, Birminghamphotograph, portrait, female, portrait of a lady, j t haden

Small oval head and shoulder portrait of a lady wearing a dark dress with a wide crocheted collar and a brooch at the neck. She has a lacy type of head dress. Photo mounted on dark brown card with the photographer's name printed in red on the back.M. W. Bent, Pall Mallphotograph, portrait, male, portrait of a lady, m w bent

Photograph - Black and white. Portrait of a woman, from shoulders upward, wearing a high neck, velvet type material, puffed sleeves. She has tight curly hair.Alan Spicer, Bendigo.person, individual, female portrait, photograph. portrait of a woman. unknown family collection.

Whitish card with pale green border along the cut edges. Gold line between the green & white. A white, green & grey stairway with gold work on the sides of the stairway.On the stairway are 3 little girls & 2 boys. The girl near the bottom of the stairway is wearing a green dress. She has a musical instrument on her shoulder. She has blond hair. Next is a boy wearing a white shirt, yellow waistcoat & black jacket. He has dark coloured hair. Next is a girl with reddish hair. She is wearing a yellow dress. At the top is a boy & girl together. The girl is holding a blue & red fan in front of her. The boy is half behind her. He is wearing a dark jacket. They both have blond hair. Behind the stairway are two palm type trees. Blue shading behind the children. In the bottom left corner is a blue scroll work triangle with 'With Best Wishes' printed in gold.person, greeting cards, malone collection, malone collection, greeting cards

Photograph. Gertrude Perry. Black & white head & shoulders photograph of Gertrude Perry. White blouse with small flowers around neckline. Mounted on buff card. On the back: The Student Prince 1958. On the front: Grand Duchess Anastasia (Gertrude Perry) (typed).person, individual, personal/portrait, gertrude perry collection, perry gertrude, the student prince, grand duchess anastasia

Carl Rudolph Braun (1823-1891) was the inventor of this instrument, as well as a type of decapitation hook. Braun was born and practiced in Austria, and followed Semmelweis as assistant to Klein at the Vienna Maternity Clinic in 1847, before becoming its head in 1856. Braud added a gynaecology section to the clinic in 1858, being convinced that obstetrics and gynaecology should be together. (Source: Baskett, Thomas. 'On the Shoulders of Giants: Eponyms and Names in Obstetrics and Gynaecology'). This device was included with a range of other obstetric instruments, mostly destructive instruments, given to RANZCOG from Box Hill Hospital labour ward in February- March 1998. The maternity service at Box Hill Hospital combined with St George's hospital in Kew to be known as Birralee Maternity Service. These instruments were collected by Julie Collette, Unit Manager, St George's Kew and given to RANZCOG Museum Curator, Susan Barnett.Craniotomy forceps, Braun's. Stainless steel forceps, with wingnut. Upper blade has open oval section and ridged grip section on the handle. Lower blade has serrated inner edge and ridged grip section on the handle. Wingnut is used for attaching the upper and lower blades of the forceps. Inscribed "B.H.H.L Ward" on forceps."B.H.H.L Ward"destructive instruments

This statue is a Louros type statuette, known from the Louros cemetery of Naxos, Greece. The figure is standing and has some plastic features. There are no facial features and no arms, just stumps at the shoulders. Such figurines are found in ancient graves. This is most likely a replica of an antique figurine originating at Naxos cemetery, Greece. Cycladic figurine depicting a feminine figure on carved pedestal. A wire necklace with medallion is attached, and inscribed YNNE-TAN with laurel wreath. Handwritten inscription in ink on base (see inscription). Sticker attached to base carries handwiring which reads 'FF'.Louros type figurine 2800-2300 B.C. Nat. Arch. Museum Athens 1978

The Scheibe Bergfalke II is a high performance (for its day) and relatively inexpensive two seat sailplane designed by Egon Scheibe. It appeared in 1953 as a derivative of the Scheibe Mu13 Bergfalke and incorporated design changes to resolve and simplify structural issues that affected the Mu13. The Bergfalke II-55 followed in 1955. About 300 of the Bergfalke II and II-55 types were built in Germany and Sweden. This aircraft of the Bergfalke II-55 type was built by Scheibe in 1961 (work number 339). After a long life at Fliegergruppe Leimen e.V. logging 6754 flights and 1588 hours in the air, the glider was imported into Australia from Germany in June 2004. The glider was registered as VH-GKZ in January 2005 by Thomas Dattler of Millumbindy and flown only a small number of occasions (probably at Byron Soaring Centre). The Mangalore Gliding Club appears to have taken an interest in the glider in 2006 and completed routine Form 2 inspections in 2006 and 2009. The amount of usage during this period is unclear as the logbook records held are incomplete. In January 2012 the glider was purchased by the Southern Riverina Gliding Club and flown at Tocumwal until it was damaged in 2013 due to being blown over while at rest on the airfield. The 10 year survey was due in March 2013 and a decision was made by the club to donate the glider to the Australian Gliding Museum instead of completing the necessary repairs for returning it to an airworthy condition. It is estimated that the glider was flown about 300 times and perhaps logged about 140 hours in the air in Australia. If restored this exhibit will be representative of the Scheibe Bergfalke II-55 sailplane type (a rarity in Australia).Tandem two seat sailplane of a wood and tubular steel construction covered with plywood and fabric. It has a fully enclosed cockpit under perspex (which is missing from this airframe). The wings which join the fuselage at shoulder height are swept forward such that the aircraft can be flown solo from the front seat and be properly balanced. The aircraft is in a damaged condition. Registration "GKZ" on sides of fuselage glider, sailplane, australian gliding, scheibe, bergfalke, byron soaring centre, mangalore gliding club, dattler, southern riverina gliding club, tocumwal

Clothing. Rounded neckline at the back, deeply scooped at front. Back fastens with 12 metal hooks and eyes. Back hemline is slightly shirred to nip in the 67 cm waistline, which is peaked at the cntre front. ''Leg-o-mutton'' type sleeves are gathered at the shoulder, and above the elbow, and finished with an 8 cm band of beading and sequin embroidery and a 4.5 cm black silk frill, and a frill of black lace, with an exquisite fruit and floral woven pattern. The neckline is trimmed with a deep lace and sequined silk overlay. Three velvet ''rosettes'' trim the centre front of the overlay. The silk bodice is shirred from just below the shoulders, to give fullness for the bustline sequins, tiny beads, velvet rosettes, silk chiffon frills.costume, female, black silk boned bodice with lace

Clothing. Beautiful cream lace in a deep curve (which possibly may have been the front or back) extending over the shoulders, into two long peaks- possibly a deep, V neckline. The lace has diamond shapes, woven in groups of four in a larger diamond shape, and also in a Maltese Cross type grouping. These appear to be ''fillers'' between circular shapes, 6 cm in diameter, of four-petalled flowers''. The outer edge has a scalloped effect, each with a Maltese Cross'' type filler. Possibly Brussells Lace. Two matching silk handkerchief Number 11414.30, No.1 of 6, No.2 of 6.costume accessories, female, lace collar

Embroidered silk, with a swirl type embroidered pattern. Wide, and deep square neckline. Back opening with nine metal hook and eye fasteners. Seven 16cm long bones encased in ribbon - three in the front, and two either side of the back opening. The wide square neckline is edged with 4.5cm wide fine lace - (two narrower pieces stitched together). Five .5cm wide tucks border the front and back neckline. The sheer embroidered tulle sleeves have a silk panel under arm. Shoulders and sleeve cuff are trimmed with a feature of artificial roses and leaves - roses 2.5cm diameter. A 17cm frill extends from the back opening, passing under the armhole, across the tucked border at the neckline to the back opening of the left side. This frill is also trimmed with the artificial roses at 10cm intervals. The bands of lace that trim the neckline also border this frill. Stiffened circular shaped shields are stitched under the armhole, and on the adjoining under arm of the sleeve. Pink chenille type tufts interspersed on embroidered silk overlay. PART 0F WEDDING OUTFIT 11400.781; 782On the lining panels of the left sleeve is marked FLIRT, Made in U.S.A. 1 2 2.costume, female, cream silk wedding bodice

Postcard, WW1, B&W image of Mont St. Quentin facing west. Two military type figures with haversacks on one shoulder walking downhill. Trees, some denuded, at top right. Copy A28postcard, ww1, mont st. quentin, france

Narrow fox fur collar. Pointed 1 cm wide 'skin' nose, which forms the upper part of the enclosed metal clip fasten the collar (squeeze lever on inside). Two glass eyes. A corded ''chain'' finished with a woven toggle, and a cord covered hook fasten the fur around the neckline or shoulders. Ruched ribbon trims both ends of the crepe type cotton(?) lining '' tail'' has fur threaded onto a linen thread.costume accessories, female, red fox fur collar

Clothing. Royal blue woollen fabric, with revere pointed collar and lapels. Left lapel has one stitched button hole. Breast pocket - depth 17.5 cm, width 14 cms embroidered in light blue, royal blue and gold, a coat of arms with laurel wreath cricket stumps, ball and two cricket bats. Within a shield shape is embroidered BDCA-possibly Bendigo and District Cricket Association. Below the shield shape is an embroidered ''ribbon'' embroidered with PROVINCIAL PREMIERS VCCL 1952, 1.5 cm braid-royal blue and gold trims the sleeves above the cuff.One small internal pocket in left front.All internal seams are bound in black tape. Shoulders of the blazer are lined with black polished cotton type fabric. Sleeves are lined with cream cotton fabric, with fine stripes of blue and brown. Two stitched button holes and two black plastic buttons.Label inside back collar: David Lack Pty Ltd Melbourne & Sydney. Label stitched inside back shouderline: Blazer and Uniform Specialists David Lack Pty Ltd Melbourne , Sydney. NAME….No…costume, male, blazer - bendigo cricket club

Clothing. Royal blue, single breasted blazer, with revere collar and three brass button front fastening. These three buttons and two smaller buttons on the sleeve cuffs, have the round sun symbol of Japan, and the Olympic Rings impressed into them. The breast pocket, with rounded lower corners has a cloth badge, 9.5 cm long X 6.5 cm wide, which is embroidered with a 5 cm diameter ball (of the sun) and five Olympic Rings in navy blue embroidery. One 20 cm long vent in lower centre back seam. Padded shoulders. Fully lined sleeves and front, while back is only lined across the shoulders. One inside pocket on each side front, has a button closure. Two pockets-22 cm long X 17 cm wide on either side of front, at lower edge. Single breasted. One small 1.4 cm diameter button, badge or Olympic pic, pin fallen from a blazer pocket. The button badge has a bronze like appearance, with impressed Japanese type characters on the surface. A pin type clasp at rear, thought to be a metal badge.All on inside of garment,right hand front. Toray® Toray Rayon Co. Ltd.Toray TETORON ® Riverloft ® Yarn Tailored by Mitsukoshi, Tokyo 1964. O Gold symbol Japan Olympic Rings 1964. Button have on underside: Tokyo 1964.costume, male, tokyo olympic blazer 1964

White cotton, nurse's apron, heavily starched. Three piece skirt, lightly gathered at back, adjoins a 4.5 cm waistband, and bib front which has broad shoulder straps 8.5 cms wide which cross at the back, and button to the waistband, leaving a 10 cm long rounded tab finished end. No buttons evident, which probably suggests removable buttons, fastened with safety pins, or "hair clip" type fasteners. A 3.5 cms tuck has been sewn around the hemline.Two buttonholes in shoulder strap tab end. Three button holes in back waistband. Worn by Merryn Ellison.costume, female, white cotton nurse's apron