Plaque with metal railway bridge bolt and 2 metal railway line spikes.Spikes have lip on top to hold rail lines down with chisel shaped ends to by driven into sleepers. Metal bolt used to hold railway sleepers to bridgesNo markings on spikes or bolt. Plaque brass plate engraved-: BURMA RAILWAY BRIDGE BOLT & RAILWAY SPIKES Recovered 1987 By Ex P.O.W V.X. 30397 BILL TOON Approximatly 7,000 Australians Lost Their Lives Building This Railway Line 1942-1945.

This photograph was taken during the upgrade of the Bendigo Railway line at the Sunbury Station in 2005. The upgrade took twelve months to complete and during this time bus services replaced the trains for commuters along Bendigo line.A coloured photograph of the construction on the site of the Sunbury Railway Station. The old railway lines have been removed and the bluestone road over rail bridge can be seen with excavation equipment in front of it. Concrete sleepers which replaced the old sleepers are on the LHS of the photograph.railways, bendigo line, railway stations, bridges, bluestone bridges, sunbury railway station, george evans collection

Used in the timber and sleeper-cutting industry. Used to square sleepers. This axe was possibly used by the donor John McMahon.Used in the timber and sleeper-cutting industry in the Orbost region.Timber sleepers were superceded by concrete sleepers in c. 1970s. broad-axe sleeper-cutting timber-industry An iron axe head with a very long cutting blade and a long wooden handle. broad-axe sleeper-cutting timber-industry

native garden, bush tucker, kath deery

Set of ten colour photographs excavations around the rail head to examine sleeper condition in vicinity of poles 4 and 6 in Wendouree Parade, taken by Warren Doubleday on 13.09.2002. Printed on Agfa Paper. 2603.1 - Road surface prior to commencement of excavation near pole 6 2603.2 - About three sleepers excavated - noted poor sleeper nearest to camera. 2603.3 - vertical photo from above showing sleepers and foot of rail. 2603.4 - ditto 2603.5 - ditto 2603.6 - Backfilling with crushed rock near pole 6 - Alan Snowball, Richard Gilbert and Oedf Bylsma. 2603.7 - ditto 2603.8 - Excavation near pole 4. 2603.9 - ditto 2603.10 -ditto On rear of each photo in brown felt tip pen, the details of the location and some notes.wendouree parade, trackwork, st aidans drive

Series of 8 black and white photographs of the trackwork equipment and tools on the MMTB system. .1 - Hydraulic drain cover lifting device. .2 - rack of jack hammers being lifted - St Kilda Road? .3 - length of rail being lifted by 12 men with MMTB equipment in the background. .4 - Pack of sleepers being lifted with many wood blocks in the background. .5 - pack of 12 jack hammers in their lifting rack. .6 - light weight tool being used to lift a track pit cover by two men. .7 - One man demonstrating the lifting of a 44 gallon drum. .8 - two men rolling a 44 gallon drum off a truck.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment

Set of thirteen colour photographs of the repair of the broken joint in Wendouree Parade as part of the track works in the area. Photos taken on 15 and 16/3/2003, printed on AGFA paper. 2555.1 - Gary Wood, Oedf Byslma looking at the excavated area, with sleeper cutting going on in the background. 2555.2 - Gary Wood and Alan Snowball, cleaning rails and the area, shows status, which was tight to gauge. 2555.3 - Removing sleepers. 2555.4 - First sleeper installed. 2555.5 - Cutting sleepers to length - Rolf Jinks and Andrew Mitchell. 2555.6 - Installing sleepers. 2555.7 - All 4 new ones positioned. 2555.8 - Cutting bolts from old plate. 2555.9 - Bending the rail. 2555.10 - Tram 33 at the temporary terminus. 2555.11 - Rail repositioned. 2555.12 - Installing the screw spikes - Gary Wood, Alastair Reither, Andrew Mitchell and Alan Snowball. 2555.13 - Welding the plates etc - 16/3/2003 - Alan Snowball.trackwork, wendouree parade, track, tram 33

Gold coloured metal 'sleeper' earrings. Metal has been given a 'twist' effect. Each earring is hinged to allow opening and closing.bendigo, gold mining, qc binks, qc binks, earrings.

Report - comb bound 63 pages + appendices 30 pages - titled "Upgrading the tracks of Melbourne's Street Tramways", written by Bob Vanselow, MMTB Project Engineer and presented to the Third International Rail Sleeper Conference Brisbane September 1979. The paper looks at the then current system, historical track methods, current track laying methods and parameters, special work, crossings, joints, concrete mixes, design, open ballast track. The appendices has various diagrams and photographs showing track construction details. Hard copy added 29/3/2020 - received and printed in an e-mail dated 28/4/2011, from Bob Vanselow - See Reg Item 4431 for details.trams, tramways, track, mmtb, track laying, construction, sleepers, rails, points

Series of 8 black and white photographs of the trackwork used at H crossings (where two tracks cross another two tracks at right angles.) .1 - H crossing being renewed. .2 - New H crossing laide out in a yard .3 - H crossing being completed at Queensway / Chapel and Dandenong Road, early 1968 with the All Saints church in the background. .4 - being renewed .5 - ditto .6 - ditto with a tram crossing. .7 - as for .4 .8 - showing extensive fish plating on a wooden longitudinal sleepers, plates bolted to the wood or timbers.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment, queensway, chapel st, dandenong road

Used in the timber industry for trimming sleepers or shaping timber.This item is associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s.An iron axe with a long cutting edge. The neck of the wooden handle is chipped.broad-axe sleeper-cutting timber-industry

Photograph, black and white. Portrait of a young woman, leaning on a rock, looks like in a garden.She has curly/wavy short hair, wearing earrings(sleepers).Bartlett Bros. Sandhurst.person, individual, female portrait, photograph. portrait of a young woman. unknown family collection.

Black and white negative - 4 scanned images - of the laying of the first track inside the BTPS depot - placing sleepers and rail on No. 3 road. May or June 1972,trams, tramways, btps, trackwork, depot

Has a strong association with a BTM/BTPS volunteer - 1990'sColour photograph of (left to right) Darren Hutchesson, Simon Jenkins, Len Millar and Garry Wood working on the access track c1996 dogspikiing new sleepers. Printed on Kodak paper.volunteers, btps, access track, trackwork

This Register has many inscriptions for Forestry activities in the Orbost region, such as Sleeper Cutting Licenses and other licensed activities such as Wattle Bark Stripping, Saw Mills, Logging Licenses, Sleeper Off-cuts. It contains the names of people involved in these activities, the amounts of money they paid to the Forestry, and dates. This Register appears to start in 1919 and end in 1978. An excellent resource for research into the forestry industry in the Orbost district since this Register contains the names of men who paid license fees to the Forestry Dept. to allow them to work in the forests in various activities such as sleeper cutting, wattle bark cutting, saw mills, logging. A hard cover ledger, dark blue/black cover with red binding. The words DEPOSITS REGISTER are printed on the front cover and also on the binding. The ledger's pages are ruled in red for DEPOSITS and REFUNDS. forestry, orbost, sleeper cutting, wattle bark cutting, saw mills, logging

Yields information about the replacement of sleepers within the depot fan and access track.Series of six colour prints by Carolyn Dean of the sleeper replacement in the depot fan and access track on 4/12/1996. Involved are Paul Mong, Richard Gilbert, Alastair Reither, Alan Snowball, John Phillips, Garry Wood, Len Millar, .1 - replacing sleepers .2 - general view .3 - initial pack .4 - general view .5 - on the depot fan Printed on Fujicolor paper. See Jan. 1996 Fares Please!On the rear in ink "20 4.12.95" and other numbers on other prints.btm, depot, trackwork, access track

Published by BHP 1967 gives the dimensions and properties of rails, steel sections and plates produced by Australian Iron and Steel and Broken Hill Pty Ltd. Was supplied free by BHP to students. Rail sections listed: 387 pound/yard crane rail 175 lb crane rail 146 lb crane rail 107 lb - 53 kg/m with fishplate and sleeper plates details 102 lb or 51 kg grooved tram rail 94 lb or 47 kg - fishplates and sleeper plates 91 lb or 45 kg NZR standard rail 82 lb or 41 kg - fishplates and sleeper plates 75 lb or 37 kg - fishplates and sleeper plates 63 lb or 30 kg - fishplates 45 lb or 22 kg - fishplates 30 lb or 15kg - fishplates 20 lb or 10kg - fishplates Yields information about rails and associated items produced by BHP AIS in 1967 along with other steel sections and plates.Book - 132 pages, white comb bound + blue plastic covers.railways, tramways, rails, bhp, fishplates, sleeper plates

Also three other photographs taken at siding of Colquhoun Railway Siding, donated by Jan McDougall in 2000Colour photograph taken at the site of the previous Colquhoun Railway siding, showing the position of the dismantled track and some sleeper remains, surrounded by young growth forest and scrub. East Gippsland Victoriahistoric site, railway

Date made December 2011|This bridge is one of the few remaining of the several constructed on the Bairnsdale to Orbost railway line from 1913 to 1915.|Also eight photographs similar views, four taken of the top, four from below the bridgeColour photograph showing different views if the timber railway trestle bridge at Wairewa. Railway line and sleepers have been removed, structure appears to be reasonably intact. Nowa Nowa Victoriabridges, historic site, transport

The Donchi family has been cutting sleepers since the 1890s in the Orbost area. This photograph , one of a set of six, was taken for an article in the Victorian railways Magazine in 1975. This was a pamphlet produced for Victorian Railways. . It contains photographs and an article about Orbost as "Timber Country" and a detailed article titled, " Cutting Sleepers is a Family Business" which tells about the Donchi family.This item is associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s. Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years..The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A black / white photograph of a bush scene of a timber harvesting coupe used by the Donchi family.on back - Pr 8766sleeper-cutting-orbost donchi-orbost timber-industry-orbost

This photograph, one of set of six, shows Ken Donchi, the youngest family member (at the time of photograph) at work as a sleeper cutter in the Orbost area since the 1890s. The photograph was used in an article for the Victorian Railways Magazine 1975. . It contains photographs and an article about Orbost as "Timber Country" and a detailed article titled, " Cutting Sleepers is a Family Business" which tells about the Donchi family.This item is associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s. Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. .The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A black / white photograph of Ken Donchi driving a bulldozer in bushland outside of Orbost.on back - Pr 8769donchi-pat sleeper-cutting timber-industry-orbost-railway

The Donchi family has ben involved in sleeper cutting in the Orbost district since the 1890s. This phootograph , one of a set of six, was taken for the Victorian Railways Magazine, August,1975, a pamphlet produced for Victorian Railways. It contains photographs and an article about Orbost as "Timber Country" and a detailed article titled, " Cutting Sleepers is a Family Business" which tells about the Donchi family.Name Associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s. Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A black / white photograph of Pat, Ken and Alan Donchi working a large saw at a timber coupe in Orbost.on back - Pr 8767timber-industry-orbost sleeper-cutting-orbost donchi-family