Colour photograph Mathematics Teaching Tools such as dice, cards, bead counters and popsicle sticks.calculator, mathematics, dice, cards, bead counters and popsicle sticks.

Black and white photograph of Collingwood Technical School deputation to the Minister of Education (the Honourable A. A. Inchbold) on 21 July 1950 re the Electrical Trades Building. Minister is on the left next to Mr. Alex Strang, Principal and Mr. George H. Thomas. Scott 36-37, and p67. Also see copy of names on reverse of photograph.collingwood technical school, electrical trades building, nmit

Used at Ballarat School of Mines Building Studies, Yuille Street, Ballarat. This probably in the 1960s. It was sourced from David Flintoff. Steel cased electric motor, two wooden handles, power cord and spannerUpper Plate: STANLEY ELECTRIC TOOLS; Type H39; Model B; Serial No. CT 4887 Lower Plate: STANLEY H-13-B; US Pat. - 2562143stanley router, electric router, ballarat school of mines, building studies, david flintoff

This flag originally flew from the flagstaff on the Trades Hall Building in Camp Street Ballarat on December 3rd 1942. The flag prompted many enquiries to the Ballarat's Courier newspaper. The Courier in reporting that the flag was, in fact, a replica of the original Eureka Stockade flag went on to say that: "… it (seemed) very strange that the town in which Eureka made a name for Australia and its efforts to get freedom from control for the ordinary man, did not recognise the flag that flew while the first move for freedom was fought out against big odds." The Trades Hall Eureka flag, made of cotton material, was used in union marches during the 1940s. In later years it had been all but forgotten, until in 1981 it was brought to the office of the then MHR for Ballarat, John Mildren by members of the family that the flag maker had boarded with in Ballarat. David Miller, who had a keen interest in the Eureka story and was electorate officer for John Mildren, became custodian of the flag for many years and presented it to Ballarat Trades Hall for display. In 1994 The Ballarat Trades Hall Eureka flag travelled Australia as part of a touring Eureka collection. At that time, the Secretary of the Ballarat Regional Trades and Labour Council, Graeme Shearer said “…The Eureka flag then, as it does now, symbolises the struggle for basic rights and democracy”. On Wednesday 11th July 2001, following a ceremony to mark the refurbishment of the Galloway Monument, the Ballarat Trades Hall Eureka flag was unveiled at a function in the Ballarat Trades Hall by President of the Ballarat Trades & Labour Council, Rhonda Young, and Premier of Victoria, Steve Bracks. The Trades Hall gratefully acknowledges the assistance of Dean Mighell, then Victorian State Secretary of the CEPU/ETU - who was a passionate supporter of the diggers' stand at Eureka - and instrumental in making funds available to assist in Trades Hall's Eureka flag being mounted in the Main Hall of the Ballarat Trades Hall. As far as we know, this is the second oldest Eureka flag in the world. Union (especially Ballarat Trades and Labour Council) history and Eureka Stockade - Ballarat.Flag; blue background; white embellishments - cross and stars; framed.btlc, ballarat trades hall, ballarat trades and labour council, mildren, john, miller, david, southern cross flag - btlc, eureka rebellion, trade unions - history, gold mining - ballarat, gold miners, eureka flag - btlc

White text on a rainbow flag background. Additional text: "Authorised by Luke Halikari, Secretary Victorian Trades Hall Council, 54 Victoria St, Carlton South, 3053. Printed by Kosdown Printing, 10 Rocklea Dr, Port Melbourne, 3207."marriage, marriage equality

Ballarat Trades Hall is registered by the Heritage Council of Victoria Designed by the Ballarat architects James and Piper, built in 1887-8, and continuously used since then as a meeting place and offices for Ballarat's trade unios, this grand Victorian Mannerist style bilding reflects the rowing status of organised labour in Victoria Victorian Heritage Register Number H0657ballarat trades hall, camp street, unions, foundation stone, plaque, brett edgington, paul clempson

Folded A3 Sheet, colour printed, titled "Public Transport Hit Hard by Budget Disaster!", issued by 14 Unions, Victorian Trades Hall Council, dated August 1989, looking at the transport budget for 1989 - staff cuts, jobs, Met ticket system light rail proposal for Upfield, Western Bypass and action being taken by Unions to resist these cuts.trams, tramways, unions, transport, budgets, vthc

Thirty Two page book printed on white paper contained within a light card cover, titled "Summary of Victorian Workers' Compensation Act" and dated 1965. Published by Melbourne Trades Hall Council, M.C.C. Jordan, Secretary. Has Trades Hall logo on the top of the cover and on the title page. Has foreword, index, gives details compensation details, definitions, dependants, employment, injuries, assistance, payment, travel, procedures, Has three pages for future amendments. Has been marked "Industrial Officer" in the top left hand corner. .1 - Thirty Two page book printed on white paper "Workers' Compensation Act" and dated 1 July 1947. Similar content as to above. Written by James Wilkinson, Workers' Representative Workers' Compensation Board. Full scan of document added as a pdf file 5/6/2019.In top left hand corner "Industrial Officer"trams, tramways, crews, employment, accidents, unions

Owned by long-time Australian Nursing and Midwifery Federation (Victorian Branch) Professional Officer Catherine Hutchings.Colour flyer advertising union-led protest ahead of the 1998 Australian federal election. Image depicts 'scab' labour used in 1998 waterfront dispute. along with an authorisation and the following text: 'feeling relaxed & comfortable in John Howard's Australia? protest against Howard's IR laws 10 am Wed. 30 Sept. Trades Hall Cnr. Lygon & Victoria St. Carlton'.victoria, australia, john howard, 1998 federal election, protest, industrial relations, unions, trade unions, trades hall, carlton, politics, political history, waterfront dispute, events, labour history, solidarity

A number of Plumbing tools dating from 1880s-1970s and used in teaching at Collingwood Technical School then also at Preston Technical School and at Northern Metropolitan College of TAFE's Heidelberg campus. Includes: Kerosene blow torch X 2 (1930s-); Stillson Grips; Pipe Cutter; Mash hammer; Adjustable spanner X 3 different sizes; Caulking tool; 5 way tee, 2X3 way tee, 4 way tee (1930s-); Old Handmade lead traps (student work) X 2; Metal tool tray holding; Offset adjustable spud spanner; Pear shaped lead working mallet; Bossing tool for lead work (1880s-1920s); Soldering iron (1920s-); Set square; Large screwdriver; Also Plumbing texts: • Problems for elementary physics, new rev. edn., by Thomas Tasker and Alexander Boden, Science Press, Sydney, 1966. • Gasfitting. Printed and published by McCarron Bird Pty. Ltd. [Melbourne] • Trade science for plumbing apprentices, Education Dept. Victoria, 1954 • Sanitary Plumbing and water supply, Dept. of Labour • Gasfitting, produced by members of the Colonial Gas Association Limited, Gas and Fuel Corporation of Victoria, and the Technical Division of the Education Department of Victoria. Rev metric edn. 1976 • Mechanical world year book 1953, Manchester Emmott & Co., 1953 collingwood technical school, preston technical school, northern metropolitan college of tafe, plumbing tools, plumbing texts, nmit

non-fictionOne A4 page of Blackburn Cool Stores tool inventory 31/12/1958blackburn cool store, tools

Caulking is the traditional technique used on wooden vessels built with butted or clinker-built planks to fill the gaps between these planks while still allowing the wood to flex and move. This involved driving the irons, hammered in with the mallet, deep into the seams to open them up. After this, spun yarn, oakum (hemp) or cotton was driven deep into the gaps. The hemp or cotton was soaked in creosote or pine tar to make the joins watertight. Caulking also played a structural role in tightening up the hull or deck by reducing the longitudinal movement of the neighbouring planks. William Marples junior joined his father's joinery making business in 1821. In 1860 William's sons joined him and the firm became William Marples and sons. Over the years they acquired John Moseley & Sons a London plane maker and Thomas Ibbotson & Co a Sheffield edge tool maker. Growing to become the most prolific and best known Sheffield tool maker. Their large factory was known as the Hibernia Works. Their trademark was a shamrock that appeared on some of their tools, in 1961 they had about 400 employees. In 1962 the record Tool Company and William Ridgway acquired a fifty percent interest in the company and in 1972 the companies merged with several others to form Ridgway Tools Ltd. After 116 years at its Hibernia Works, the company was moved to Dronfield. A 1982 takeover by A G Bahco of Sweden was short-lived and in 1985 Record Ridgway returned to British ownership first as Record Marples Woodworking Tools Ltd. In 1988 then as Record Holdings PLC in 1993. In 1998 the company accepted a bid from American Tool Corporation, subsequently trading as Record Irwin. The Irwin company itself was acquired by Newell Rubbermaid in 2002 and renamed Irwin Industrial Tool Co. Both the Marples and Record names were re-branded "Irwin" However the name has since been resurrected as Irwin/Marples and applied to wood chisels and table saw blades now made at their new facility in Udine, Italy. As a footnote, William Marples was the uncle of Robert Marples and Joseph Marples, both of whom established competing tool making businesses in Sheffield. The Robert Marples firm disappeared early in the 20th century. After several changes in the company's ownership tools are now made under the Ridgway name but in China. A tool made by a company with a long family history of tool making in Sheffield England, with a member of the Marples family, Joseph Marples establishing a competing tool company which continues today to manufacture quality products for the joinery and shipwrights trades.Caulking tool straight wide blade, Stamped "W Marples & Sons" & James S Steele tool box.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, caulking tool, caulking iron, james s steele

A spokeshave is a tool used to shape and smooth wooden rods and shafts - often for use as wheel spokes, chair legs . Spokeshaves can be made from flat-bottom, concave, or convex soles, depending on the type of job to be performed. Spokeshaves can include one or more sharpened notches along which the wooden shaft is pulled in order to shave it down to the proper diameter. Historically, spokeshave blades were made of metal, whilst the body and handles were wood. An early design consisted of a metal blade with a pair of tangs to which the wooden handles were attached. Like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. By the twentieth century metal handles and detachable blades had become the most common. Preston Tools was an English tool making company also known as E.P. Tools and Edward Preston Tools. Edward Preston Sr. (1805-1883) was first listed as a plane maker at 77 Lichfield Street in the 1833 Birmingham Directory but it is believed he may have started business there as early as 1825. Around 1850 his son, Edward Preston Jr. (1835-1908) left school to join his father's business and he later started up his own "wood and brass spirit level manufactory" at 97-1/2 Lichfield Street by 1864. By 1866 Edward Jr. had added planes, routers, joiners, coach, gun, cabinet and carpenters tools to his line, and the following year he moved his shop from his father's address and relocated to 26 Newton Street, before moving again to a much larger premises at 22-24 Whittall Street. This later became the office and factory of Edward Preston and Sons, who were forced to liquidate in 1934, due mainly to the Great Depression and mismanagement of the company. The plane making concern was sold to the Sheffield firm of C. & J. Hampton, who had subsequently merged in 1932 with Record Ridgeway Ltd.An ornate steel spokeshave wood plane with an adjustable screw.PRESTONS PATENTwoodwork, tools, spokeshave, moorabbin, cheltenham, bentleigh, early settlers, pioneers, market gardeners, woodplanes, craftwork, bicycle wheels, furniture, cabinetmaking, cartwheels, wagons, drays, preston edward, preston tools ltd

Notes on tools and machinery. Various page numbering indicates that these may have been distributed at intervals during the course.Original class notes from the 1920s.Black folder with Collingwood Technical School label on cover.Handwritten on front cover label: S.O.Tools / 1920's.collingwood technical school, cts, class notes, machinery, tools, nmit,

A spokeshave was made with a wooden (usually beech wood) body and metal cutting blade. With industrialisation metal bodies displaced wood in mass-produced tools. The name 'spokeshave' reflects the early use of the tool by wheelwrights.Used by carpenters and/or cabinet makers and/or wheelwrights in the Kiewa Valley in the 1800s and 1900s. The tool consists of a blade fixed into the body of the tool, which has a handle for each hand. It is a shaping and smoothing tool eg. curves and rounding and used after cutting with chisels or saws. Ref. Pg 28 Tools for all Trades Cataloguewoodworking tool, spokeshave tool

Report - approx. 180 pages, double sided A4, comb bound with manila covers, titled "Union Metplan - Public Transport Unions / VHTC submission to Government on Metplan August 1988". Provides a strategy for the future of Melbourne's Public Transport from the Transport Unions and Victorian Trades Hall Council (VHTC) viewpoint. Has an index, list of people involved in the study, provides viewpoints on extensions to the rail and tram networks, revenues, funding and employment conditions. On the inside cover is a light card pocket containing a card library borrowing slip with the name of the report title written on it. See also Reg item 2809 for a August 1988 summary paper and 1572 for associated documents.Stamped on front cover "Discarded from PTC Library 10 October 1989" and written in pencil "Union Metplan 1988". On first sheet stamped "Ministry of Transport and MTA Library"trams, tramways, reports, melbourne, mta, atmoea, unions, metplan

Book - 32 pages centre stapled titled "1978 Edition - The Australian Tramway and Motor Omnibus Employees Association (Victorian Branch) - Safety, First Aid, Hand tools and protective clothing and equipment". Provides information and guidance on Industrial safety, equipment and fire. Has adverts for The Druids, Holdens, ANSI, Hibernian Society, Thomas Warburton, Wonderpak Chemicals, Fairmark, Commonwealth Engineer, Raff Jeanery, Australian Thread, Regent Motors, Yarra Falls Ltd, Fabspec, Silverway Pharmacy, Consolidated Pneumatic, Sands and McDougall, McAdams of Essendon, the Irish National Foresters Catholic Benefit Society and Tramways Benefit Society.trams, tramways, unions, safety, medical, benefit society, workshops