Set of two colour photographs of the 1998 Model Railway Exhibition, BTM stand, June 1998, sent to the Editor of Trolley Wire - used in the August 1998 issue of Trolley Wire. All photos by Darren Hutchesson. All photos on AGFA Prestige paper. 1142.1 - Photo of nine of the model trams in front of the depot - BTM Model Tramway - June 1998 Queens Birthday weekend - used on page 45 of Trolley Wire. 1142.2 - General photo of the model railway and stands. Alastair Reither at the controls! - used on 46 of Trolley Wire magazine. See August 1998 issue of Trolley Wire and July 1998 issue of Fares Please!Both have stickers on the rear with photo number "55 or 56" and "Photo same size" and pencil cropping marks for printing purposes.trolley wire, model tramways, model railways, models

Gives the design details of the device or fitting known as a trolley wire ear that holds a tramway copper trolley wire in position. Notes that the drawing was traced in 1958 from a MMTB drawing.Yields information about the design of trolley wire fittings and how they were fabricated. Interesting that the drawing is dated 15-8-1958, given that on 1-3-1958 the last street tramways operated by the Victorian Railways closed. May have been used for electrically powered gantry cranes or overhead travelling cranes used in Workshops and railway yards.Dyeline print of Victorian Railways drawing - F6236 - Ears Female TramwayHas number "7515 D.33" in black pen in bottom right hand corner.tramways, trams, overhead, victorian railways, trolley wire, engineering, electrical engineering

Set of three colour photographs of buildings and demolition of the former ESCo / SECV Wendouree Parade Power station sent to the Editor of Trolley Wire - used in the November 1997 issue of Trolley Wire. All photos by Alan Bradley. Photos taken during November 1993 or March 1994. All photos on AGFA paper. 1140.1 - The gate house building in Wendouree Parade - Nov. 1993 - used on page 21 of Nov. 1997 Trolley Wire. 1140.2 - Foundation stone - 23/8/1904 - of the ESCo power house. Gives names of people involved and contractors etc. - used on page 20 of Trolley Wire. Taken during November 1993. 1140.3 - Demolition work well advanced showing foundations and basement areas of power station - taken during March 1994. Used on page 25 of Trolley Wire. Hi res image of i2 added 16-12-2015. All have yellow stickers with photo number for magazine printer, and white sticky labels with photo number and words "same size" written on black ink. 1140.1 and 1140.2 have pencil cropping marks.trolley wire, esco, power station, demolition

Set of three colour photographs of the delivery and hand over of the Trolley Wire by the Minister of Transport Mr. Alan Brown on 26/11/1996 sent to the Editor of Trolley Wire - used in the February 1997 issue of Trolley Wire. All photos by Carolyn Dean. All photos on Kodak paper. See also Reg. Item No. 503 (Newspaper Cutting) and Item 721 for photo used on page 29 as well as these three photos used on pages 28 and 29. 1141.1 - Two reels of trolley wire on delivery truck on side of depot fan. 1141.2 - Off loading one of the reels with the Barry James Tractor Crane. 1141.3 - Photo of Alan Brown speaking with Member for Ballarat West Paul Jenkins alongside and Richard Gilbert standing some distance away. Trams 671 and 33 in the background.All have date of photo "26.11.96" along top edge and "Photo / Carolyn Dean" towards bottom right hand corner. Also various cropping marks on the photo used in publication.trolley wire, btm, overhead

Gives the design details of the device or fitting known as a trolley wire ears that holds a tramway copper trolley wire in position. Notes that the drawing was traced in 1924 from a MMTB drawing. Has details for a splicing ear, straight line ear. feeder ear and curve ear along with details for nuts and screws.Yields information about the design of four different types of trolley wire fittings and how they were fabricated for use on the two tram lines, or electric street railways operated by the Victorian Railways.Dyeline print of Victorian Railways drawing number 4057 - Ears for Tramway Overhead ConstructionHas number "7513 D.33" in black pen in bottom right hand corner.tramways, trams, overhead, victorian railways, trolley wire, engineering, electrical engineering

Set of four photographs of Bendigo trams and infrastructure photographed by Peter Duckett, late 1940s 1 - double trolley wire at a "Y" terminus showing the details of dual trolley wire - Could be either Quarry Hill or Golden Square. 2 - Bendigo trams 24 and 22 at Quarry Hill terminus - note the cream rocker panels. 3 - Bendigo 6 at Charing Cross. 4 - Bendigo 16 - after conversion to one man tram.Yields information about Bendigo trams late 1940sSet of four black and white photographs by Peter Duckett.Details the image on the rear of the print in ink.bendigo, tramcars, bendigo tramways, overhead, double trolley wire, terminals, tram 24, tram 22, tram 6, tram 16, quarry hill, charing cross

Yields information about the appearance of the support systems used in one location, at least for the twin trolley wireBlack and white digital print from scan of a donated negative showing an overhead suspension arrangement on the trolley wire in Geelong - twin trolley wire, type of suspension system. Assumed photo taken on the same day as the others - 21-8-1955. Black and White prints made from scan of negative. Original Negative stored with Negatives. Negative scanned at hi res 4/6/2020 and image updated.On left hand side of the negatives in ink is "EI 14"tramways, trams, geelong, overhead, trolley wire

Set of four black and white photographs of interior and equipment of the former ESCo / SECV Wendouree Parade Ballarat A power station sent to the Editor of Trolley Wire - used in the November 1997 issue of Trolley Wire. All photos by Richard Gilbert. Photos taken on 20/8/1971. All photos on Kodak paper. 1144.1 - Looking along building at main distribution switch panel - used on page 24 of trolley wire. 1144.2 - a view across the main steam generator section of the power station - and AC plant - used on page 23. 1144.3 - of the British Thomson Houston rotary converters in used at the time of the photo - used on page 23. 1144.4 - a view from the opposite end of the building shown in 1144.1 - showing the rotary converters are in the front of the photo, AC generators in the middle and foreman's cabin - used on page 22. All have yellow stickers with photo number for magazine printer, and white sticky labels with photo number and words "photo xx same size" written on black ink and photo numbers in pencil from Richard.trams, tramways, trolley wire, esco, power station, ballarat a power station, rotary converters

Two copies of a Carbon typed copy of a technical procedure - 6 pages - "Extract from the 'Proceedings of the Electrical Association of New South Wales' session 1910 - 11" - giving advice on the location of Trolley Wire" giving the guide on how to locate trolley wire on curves and junctions, gives formulas, positioning at frogs, notes regarding various cars and trolley wire height includes notes on cross falls of track, a table of aluminium copper alloys - bending strength and failure modes. Consists of five pages with two blue print drawing. Each page has been scanned the blue print drawings reversed imaged as well. 4768.2 - blue print drawing showing references in the various formulas etc used. 4768.3 - ditto showing tracking for four wheeled and bogie cars and other diagrams for turnouts, frog locations and frog angles. BTPS Number "219". "226" in ink on left hand bottom of first pagetrams, tramways, overhead, trolley wire, points

A4 size sheet of preprinted paper for News Release from Vic Minister for Transport - preprinted in blue ink with "Victoria on the Move" wording and state coat of arms. Printed (Laser) with text for 26/11/96 ceremony of hand over of 2km of trolley wire to the BTM. Image added 27-11-2016trams, tramways, btm, trolley wire

Document - full title "Met Tram Overhead appreciation for Met Tram Officers & Tram Drivers" Gives a detailed inforamation on the structure of the tram overhead, its parts, poles, such as frog pans, crossing pans, points, contactors ,broken trolley wire, pantograph operation and feeder cables. Has notes on the SCADA system and Carlton Electrical control system. Written at the time when trolley poles remained in operation.Yields information about the Melbourne tramway overhead system.Document 47 A4 pages, clear plastic cover, with card covers comb bound along top edge.tramways, tramcars, equipment, overhead, electrical engineering, trolley wire

Colour print of BTM tram No. 40, at Depot Junction on a very wet Boxing Day, 1999. Tram has "Bray Raceway" sign on front drivers panel, with ice cream van in the background. Appeared in colour in the February 2000 of Trolley Wire on Page 44. Printed onto Kodak Royal Paper. Photo by Earl Ewers. Photo taken 26/12/1999.On rear in blue ink "Car No. 40 going about its business at Depot Junction on a very wet Boxing Day 1999." and in bottom right hand corner "Earl Ewers" In centre of photo on rear is label with "Photo / Enlarge to 119% 145 x 100 Colour.", crop marks and a yellow sticker with "59" written on it.btm, depot junction, trolley wire, tram 40

Colour print of Motorman John Frost and Conductor Earl Ewers at the Carlton St. terminus with tram 27 standing on either side of new tram rides signs which were sponsored by McDonalds. Photo taken on 13/2/1999 by Alastair Reither. Photo used in the August 1999 issue on Trolley Wire on page 32. On Konica Long life paper.On rear in blue ink "13.02.1999 / Motorman Frost and Conductor Ewers pose at Carlton Street with the new tram ride sign. Four of these are now in use." and in bottom right hand corner "Alistair Reither" In centre of photo on rear is label with "Photo / Same Size", crop marks and a yellow sticker with "31" written on it.btm, signs, trolley wire, carlton st., tram 27

Colour print of Richard Gilbert and a person (known to Richard) standing at the Gardens Loop during the 1999 Begonia Festival. See also Reg. Item 1094 for other photographs of the same series. Photo taken by Carolyn Dean on 6/3/1999. Print on Kodak Paper. Tramway shelter in the background and other tents for the festival. Appeared in the August 1999 issue of Trolley Wire on Page 32.On rear in blue ink "6.3.99 / President Richard Gilbert, in fully Tramway Inspector regalia, directs a member of the public." and in bottom left hand corner "Photo by Carolyn Dean" In centre of photo on rear is label with "Photo / Same Size", crop marks and a yellow sticker with "30" written on it.btm, gardens loop, trolley wire, inspectors

Yields information about the manufacture of brass overhead crossings and the complex ones ESCo were using compared to the MMTB.Letter dated 12/4/1928 from the Sands Hill Manufacturing Co, General Brass founders, Finishers Etc of 34 Queen St Melbourne to The Resident Engineer, ESCo, regarding the Overhead Crossing, Adjustable type for round Trolley Wire, forwarding three drawings of fixed type used by the MMTB in Melbourne and stamped steel pans. Typed on Mount Royal Bond Made in Canada paper.trams, tramways, overhead, points, trolley wire, esco

Newspaper Clipping (p6 of Ballarat Courier 27/11/96) of handover of 2km of new trolley wire to Museum by Vic Minister for Transport Alan Brown. Photo of drum of wire with horse tram and No. 18 in background. Photo has Paul Jenkins, Alan Brown, James Coghlan (Mayor) and Richard Gilbert. The Ballarat Courier - Gabrielle Hodson (reporter) &Alan Marini (photo). Image of newspaper added 27-11-2016 trams, tramways, trolley wire, btm

Colour photograph, postcard size, of the handing over of 2km of trolley wire from the Minister of Transport to the Museum on 26/11/1996. See November 1996 Fares Please! for full details. From left, Member for Ballarat, Paul Jenkins MLA, Victorian Transport Minister Alan Brown, Ballarat Mayor James Coghlan and Tramway Museum President, Richard Gilbert. Has horse tram in background. See November 1996 Fares Please!On rear in blue biro " 26.11.96" and "Photo Carolyn Dean"trolley wire, grants, btm, minister for transport

Yields information about the materials used in tramway overhead and could have been used as a specification by ESCo Engineers and standardization of materials in order to reduce costs.Sixteen page booklet, titled "Report of the Sub-Committee on Standardization of Overhead Line Material", published by Municipal Tramways Association, 2nd Edition, issued in May 1921, Submitted to the Annual Meeting of the Manager's Section of the Association at Birmingham, 16/6/1920 under the signature of J. Beckett, General Secretary. Gives an Appendix - List of Drawings, Suggested specification for Standard Copper Trolley Wire, steel span and guard wires, and Overhead wire fittings trams, tramways, overhead, trolley wire

Set of three black and white photographs of activities around the tramway during November 1998 sent to the Editor of Trolley Wire - used in the February 1999 issue of Trolley Wire. All photos by Richard Gilbert. Photos taken early November 1998. 1145.1 - photo of the old fare signs with caption on the rear "Retirement at last for the Museum's original tram ride signs, in service for over twenty years, and looking like it. With the fare rise to $2 / $1 new signs were introduced." 1145.2 - Photo of crew in front of tram 26 with caption on the rear "On Springfest Day in early November, Motorman O'Neil and Conductor Giles on car 26, ready for the onslaught." - photo taken 1/11/1998. 1145.3 - photo equipment on trolley being moved around with caption on the rear - "The motor cases of car 33 are currently residing on the trolley for cleaning. Here they are being relocated to the bottom of 3 road by Al and Dave, with assistance from our youngest and keenest worker, Danny Edwards." All have captions written on back in blue ink (as noted in description) and "Richard Gilbert" in bottom right hand corner, and cropping marks in blue ink on rear.trams, tramways, trolley wire, springfest, btm, volunteers, tram ride signs, tram 26

263 Single sheet of heavy paper, printed both sides, folded into 8 pages, containing side elevation of 1 horse tram, 5 electric trams, 3 motor buses and 2 trolley buses, with photo on cover and title sheet. On rear has three illustrations of tickets and a summary of historical dates for period 1878 - 1978. 263.1 - ditto, but on yellow paper - unstamped - two copies. Images added 20/10/2013.Stamped on front "Supplement to Trolley Wire"trams, tramways, adelaide, mtt, sta, horse trams, buses

Set of seven colour photographs taken by Carolyn Dean of the presentation of two reels of new trolley wire to the Museum by the Victorian Minister for Transport, Alan Brown on 26 Nov. 1996. Features President Richard Gilbert, local member, Paul Jenkins (member for Ballarat West)and Mayor of the City of Ballarat, James Coghlan. All on Kodak paper. 847.1 - Richard Gilbert speaking with Paul Jenkins and Alan Brown in background, with 671 behind. 847.2 - Paul Jenkins Speaking 847.3 - as for 847.1 847.4 - ditto 847.5 - Alan Brown speaking and Paul Jenkins 847.6 - Alan Brown on horse tram No. 1 847.7 - Paul Jenkins and Alan Brown on No. 1 See November 1996 Fares Please!All "26.11.96 / Photo Carolyn Dean"trolley wire, minister for transport, ceremonies, presentations, tram 671, tram 1

Series of nine (9) Colour photographs, postcard size, of the replacement of trolley wire north of Gardens Loop by BTM crews 4/3/1997. Photos taken on the first day of the work. 722.1 - lifting new wire into position 722.2 - lifting new wire into position with the hook style showing 722.3 - unreeling the new wire from the trailer and wire drum 722.4 - lowering the old wire down onto the road 722.5 - unreeling the new wire from the trailer 722.6 - lifting new wire into position 722.7 - cutting up the old wire 722.8 - lifting new wire into position 722.9 - running old wire onto the roadway. See March 1997 Fares Please!On rear of all photos in blue biro " 4.3.97" and "Photo Carolyn Dean"trolley wire, wendouree parade, btm, repairs

Yields information about the appearance and use of the SEC tower truck undertaking overhead work in the mid 1950's.Digital image from the Wal Jack Ballarat Album of the SEC Tower wagon truck repairing broken trolley wire in Victoria St at East St 25-9-55, photo by Wal Jack. See image i2 for rear of photograph. See image i3 for hi res scan of print. See image i4 for hi res scan of negativeIn ink on rear "SEC Tower Wagon, repairing broken trolley wire in Victoria St at East St 25-9-55" and Wal Jack stamp in top right hand corner with number "T188" written in .trams, tramways, tower truck, victoria st, sec, tram tower truck

Used by the Forrest City Signal system to initiate or cancel a signal indication. The trolley wheel would make contact with the steel strips which would send an electrical impulse to the control box that either would enable the signal to be shown or cancelled. There was one on the trolley wire at either end of the section. See reference for further details.Demonstrates part of the Forest City Signal system.Signal contactor mechanism comprising two brass ears, a section of copper trolley wire, two steel strips assembled onto a section of wood fitted with steel covers where the ears are fitted through. Item refurbished for display purposes by Depot staff 2023.forest city signals, tramways, overhead

Set of four colour photographs of the 500,000th passenger on BTPS/BTM tram services on Sunday June 10, 2001. Congratulating Mr. Lou Abbruzzi is Len Millar. Photos by John Phillips. Tramcar No. 45 in background. Photo on Kodak paper. For details of the event see Fares Please! July 2000. Image btm1824i4 used in the August 2001 issue of Trolley Wire (black and white). See Fares Please! July 2001On rear of each photo "9.06.01" (actual date was Sunday 10 July) and "Photo by John Phillips" in blue ink. On rear of 1824.4 is a white sticker "Photo 29, reduce to 7 x 10.5cm" instruction for use in Trolley Wire.500, 000 passenger, btm, btps, gold tram, tram 45

Yields information about the appearance of one of Geelong trams early 1950's with a little information about the background.Black and white photograph of Geelong No. 10 at the East Terminus, with the destination of Chilwell. Note the trolley pan above the trolley pole.On rear in ink "SEC Geelong #10@ ? East" and "W. John Webster".tramways, trams, geelong, east, trolley wire, trolley wheels, tram 10

Drawing - original dyeline print - folded into 16, showing dimensions and layout of the wooden troughing in 16 different sheds at the depot - e.g. old and new Malvern. Prepared July 1934. Drawing Number 06739A Revision A Feb. 1964trams, tramways, depot, overhead, trolley wire, trolley poles, electrical equipment

Its manufacture demonstrates from an industrial aspect a period of history following the occupation of Japan by the USA after the second world war and has a strong association with this event.Insulator - known as an egg type - ceramic - fired clay (porcelain) finished with a brown colour with two holes for span wire with the holes offset to each other. Marked in a very light almost clear finish on one side "Made in Occupied Japan" See item 8534 for another example - a larger size. https://www.gotheborg.com/glossary/occupiedjapan.shtml - accessed 15/4/20201 gives some background: "For the period from the end of World War II in 1945 through April 28, 1952, the United States and its Allies occupied Japan. The Occupation involved approximately 130,000 Americans (both military and civilian) and about 35,000 British Troops based in Japan. SCAP (Supreme Commander for the Allied Powers), led by General MacArthur, wrote a new constitution for Japan. As Japan needed to rebuild their economy after the war, part of the agreement to allow them to export goods out of their country was that they had to mark 50% of all items with "Occupied Japan" or "Made in Occupied Japan." This could be done with a paper label, cloth label (as on scarves, doilies, clothing), engraved, handwritten or stamped. Thus, you may come across things, such as a salt and pepper set, where only one of the pair is marked OJ and the other will just have "Japan" on it. The tags, labels, marks were placed on the items in Japan, before they were exported to other countries. "trams, tramways, overhead, trolley wire, insulation, electrical equipment

Trolley ear hanger assembly that would screw into an trolley ear - internal insulation or cap and cone type - hanger - comprising 1 - cast steel hanger shaped in a cone with a mechanism to clip to the overhead span wires thread on the top. 2 - cast steel cap internally threaded 3 - Insulated shaft with a mica type appearance where damaged and a steel bolt with a steel nut at the lower end.overhead, trolley wire, fittings