Showing 84 items
matching uniform royal australian navy
-
Warrnambool RSL Sub Branch
Uniform - Army, Jacket, C1968
This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of uniform worn by soldier ranks for daily work and dress parades.Khaki coloured short jacket with lapels, and waist band which has strap and buckle on right hand side. There are two patch pockets on the front have a box pleat down the middle and a V shaped pocket flap at the top, closing with a hidden button. The shoulder epaulets each have a plain khaki coloured button at the neck edge.The sleeves are cuffed fastened with a button however the right button is missing.There are red patches on each shoulder with navy blue text. The back of the jacket has darts stitched at the waist and at shoulder level. There are four khaki buttons down the front. The sleeve seams are bound in cotton tape which also forms a label on the back neck collar with the lining of the waist band also in a cotton twill.Stitched in navy blue on arm banners,” Royal Australian Engineers.” On inner label, “ DUNLOP NSW 1968 8405-66-025-6411 SIZE OF CHEST 35/36S MATCHING TROUSERS 29/30S WAIST DRY CLEAN ONLY CREASE UPPER HALF OF LAPELS ONLY . NAME....HUGHES ( in blue pen) ARMY NO... 3795948 (in blue pen)warrnambool rsl, royal australian engineers, hughes 3795948 -
Warrnambool RSL Sub Branch
Shirt, C 2015
This shirt is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) shirt in Airforce colours of blue and grey in camouflage pattern. Long sleeve with 6 buttons up the front, two chest pockets with zippered verticle openings along the button seam; two button down pockets on both the left and right shoulder with velcro patches sewn to outside flap for attachment of patches. Above the chest pockets are two patches with embroidered inscriptions in white thread on navy backing. Shirt cuffs have adjustable velcro fasteners.Inscription on interior label is worn and illegible, halfway down the tag reads “PM KEYS NO.” Throughout (on shoulder seams, above left pocket and on back of collar) is the Australian Airforce badge/motif which features a circle with the words ‘Royal Australian Air Force', the Imperial Crown, and a Wedge-Tailed Eagle in flight though this detail is inferred not physically visible. Two embroidered patches above the chest pockets read “AIR FORCE” and “FARLEY.”camouflage, general purpose uniform, airforce, uniform, australian defence force -
Warrnambool RSL Sub Branch
Naval Ratings Bib
... The Royal Australian Navy Uniforms are based...” The Royal Australian Navy Uniforms are based on the uniform ...The Royal Australian Navy Uniforms are based on the uniform of the Royal Navy. They reflect traditions that can be traced back to the Royal Navy (England) and demonstrate the relationship between the two. This bib is one of four parts to a Naval Ratings Uniform.This bib is one part of a naval ratings uniform which consists of four parts. The uniform is representative of the Royal Australian Navy uniform and can be traced to the Royal Navy (England). The complete uniform shows the connection between Australia and England since European settlement.Cream cotton twill bib with navy blue trim around neck and over shoulders in square shape. Fastened at the waist with two long ribbons which are attached to both the front and reverse of the bib.Inscribed on both the front and reverse of the interior bottom hem: “D. HILL”navy, ran, royal australian navy, naval bib, naval ratings bib, naval ratings uniform, military uniform, j.m. parsons, parsons, j parsons -
Chiltern Athenaeum Trust
Military Gold Buttons x 3 : WW2, 1939-1945 circa
... the bottom. WW2 Royal Australian Naval buttons for dress uniform. WW2 ...WW2 Royal Australian Naval buttons for dress uniform. WW2 RAN buttons. 1939-1945. 3 x gold plated military buttons. Has etchings of crown, anchor and Australian Coat of Arms with Australia underneath. Used by the RAN 1939-1945. Crown, Anchor and Coat of Arms etched into the buttons with Australia across the bottom. ww2 1939-1945, royal australian navy ww2, australian dress uniform buttons ww2 ran -
Port Fairy Historical Society Museum and Archives
Accessory - Hat Ribbons
Part of Captain William Robertson Collection who was an instructor/officer in the RoyalAaustralian Naval Reserve2 navy cap ribbons :- 1 with "HMAS Cerberus" and 1 with "Royal Australian Naval Reserve" printed on themHMAS Cerberus. Royal Australian Naval Reservelocal history, uniforms, navy, robertson, mr or captain william, port fairy naval reserve, s.s.casino, belfast and koroit steam navigation company, hat accessories -
Port Fairy Historical Society Museum and Archives
Uniform - Sailor Hat, c. 1890s
Part of Capt. William Robertson's collection. Early career in navy. Captain of S.S.Casino. RAN reservesSailor's cap: Navy and white topped sailor's cap with grey lining and navy ribbon6 7/8 size marking / 157 red inking marking on crown lininglocal history, uniforms, navy, robertson, mr or captain william, s.s.casino, royal australian naval reserve, hats -
Port Fairy Historical Society Museum and Archives
Tool - Button Cleaning Tool
Part of Captain William Robertson's Collection. Used by him when cleaning the brass buttons on his naval uniformsbrass tool for protecting uniform when cleaning buttons: Oblong brass strip with gap which allows a button to be slid in so that cleaner can be applied with out touching fabric of coat. Has hammered initials into metal W.R.local history, uniforms, navy, robertson, captain or mr william, royal australian naval reserves, s.s.casino, tools -
Ballarat RSL Sub-Branch Inc.
Mess dress jacket air force, 1970s
Owned by Carol Dale.Navy blue,shoulder boards,brass buttons one pease of uniform from a two part set item num (1324) is other part of the setRoyal australian air force, mess dress, flying officer rank air force, royal australian air force -
Ballarat RSL Sub-Branch Inc.
Jacket, 1961
Navy blue, waist length jacket with 4 buttons down centre front, 2 shoulder buttons. Two embroidered patches on each arm.Corporal rank patch and Air Force manufacturer's label on interior.air force, royal australian air force, uniform, military, short jacket -
Ambulance Victoria Museum
Gaiters, Uniform, Ambulance officer
When he died in 2007, Wally Byrne, left a legacy of public service that many would be proud to emulate. Having served in the Royal Australian Navy in the Pacific during the Second War World War, Wally later joined the Victorian Civil Ambulance as an ambulance officer. In a career that spanned more than 35 years, Wally was based at Lonsdale Street, Latrobe Street and Fairfield. He became Station Officer at the busy Latrobe Street before moving into the Mobile Intensive Care Ambulance (MICA) system. Promoted to District Officer he became officer in charge of communications and served in this role until his retirement. Chas Martin, one of Wally’s communications staff at Latrobe Street, recalled that Wally was an efficient and well liked manager. He was also a very social person. Having purchased a block of land at Christmas Hills, Wally and his family hosted regular weekend BBQ’s there for his communications staff, other ambulance officers, and their families. Wally’s son Jon, later joined Ambulance Victoria, became a paramedic and now holds a senior role in the organisation.Pair of dark brown leather gaiters with metal clips to fasten the side and a small brass buckle and strap at the top. The gaiters are marked in ink on the inside surface 'Left' and 'Right' and are both inscribed with the owners name ' W.BYRNE'. gaiters, uniform, wally byrne -
8th/13th Victorian Mounted Rifles Regimental Collection
Photograph
The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment. Anzac Day parades were a regular part of regimental life. The regiment was able to call on members who had previous service in RAN and RAAF.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of group of nine servicemen, seven in Army uniform, one in RAAF uniform and one in Navy uniform. One of a collection of photographs of 8th/13th Victorian Mounted Rifles Regiment between 1948 and 1951." Anzac Day Albury: Left Sgt.Purcell, Sgt. Larkin, Sgt. Cunningham, Lt. McKay, Sgt. Vietch, Tpr. Davies, Cpl. Giles, Sgt. Neale and Sgt. Kothoff. "anzac day -
8th/13th Victorian Mounted Rifles Regimental Collection
Photograph
The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of group of nine servicemen in variety of uniforms - Army, Navy and Air Force at Albury Drill Hall. One of a collection of photographs of 8th/13th Victorian Mounted Rifles Regiment between 1948 and 1951.Anzac Day Colour Party Sentries, Bill Purcell, Ken Kothoff ( RAN ), John Larkin ( RAAF ), John Neale, Alan Cunningham, Ian McKay, Alan Veitch, Tom Giles, Maurie Davis. -
8th/13th Victorian Mounted Rifles Regimental Collection
Uniform - Service Dress J Neale
Uniform worn by Colonel J A Neale when serving as honorary colonel of 8/13 Victorian Mounted Rifles. John Neale served with the Royal Australian Navy during World War Two, having enlisted as 16-year-old. His service was on ships off northern Australia and in the South Pacific. Following the war, he enlisted as a trooper in 8/13 Victorian Mounted Rifles when the regiment was raised, serving in non-commissioned and commissioned ranks finally rising to command the regiment 1969-76. He served as Honorary Colonel 1986-92. Colonel Neale was instrumental in the formation of the Regimental Association and the establishment of the Regimental Museum. Service dress jacket with service ribbons, yellow lanyard, silver RAAC buttons and colonel rank insignia.neale, uniform, honorary, colonel, vmr, world war two, wwii, vietnam -
Bendigo Military Museum
Headwear - BERET, Post 1945
Beret - Navy felt, ribboned band, Insignia Badge.Badge - Royal Australian Corps of Transport 'PAR ONERI'.passchendaele barracks trust, army beret, uniform -
Bendigo Military Museum
Uniform - COLOUR PATCH, C. WW2
Royal Australian Medium Artillery regiment.Felt material, navy blue background with red V stripe across centre.R A ARTILLERY, Medium Regtpatch, artillery, medium -
Bendigo Military Museum
Uniform - UNIFORM, RAN - Summer Ceremonial, Red Anchor/Tailored garments
... Royal Australian Navy - Uniform belonged to LS MTP E Rayner....% COTTON/ DO NOT BOIL, DRIP DRY, WARM IRON" Royal Australian Navy ...Royal Australian Navy - Uniform belonged to LS MTP E Rayner.1. Jumper/Barathea - long sleeve white polyester/cotton fabric with Navy blue collar attached, side zip under arm. Insignia to left sleeve depicting rank. Right side insignia depicts category. 2. Trousers - white polyester/cotton fabric, bell bottom. 3. Shirt - white polyester/cotton fabric, short sleeve, navy blue trim to square neckline. Insignia to left sleeve. 4. Silk - Black polyester black fabric to arrange around the collar. 5. Bow - white cotton tape. 6. Lanyard - white cord to arrange around neck. 7. Lid - white with black "Tally" band, sailors cap with Navy blue tape - chin strap. 1., 2. - Hand embroidered red cotton - "E RAYNER", 7. Handwritten, black ink, "LS MTP RAYNOR inside on the crown, Tally band - Embroidered gold thread "HMAS DERWENT'", on black band. " RED ANCHOR/TAILORED GARMENTS/ 65% POLYESTER 35% COTTON/ DO NOT BOIL, DRIP DRY, WARM IRON"ran, uniform -
Bendigo Military Museum
Uniform - UNIFORM, RAN - Winter Ceremonial, RED ANCHOR TAILORING CO
... Royal Australian Navy Uniform belonging to E Rayner... Australian Navy Uniform belonging to E Rayner. Sailor cap/lid ...Royal Australian Navy Uniform belonging to E Rayner. Sailor cap/lid belonged to LS MTP Ross.1. Jumper/Barathea - Long sleeve, black wool/polyester fabric. Insignia - left sleeve depicting rank - right sleeve - depicting category. 2. Trousers - bell bottom, black wool/polyester fabric. 3. Shirt - white polyester/cotton fabric, short sleeve, navy blue trim to square neckline. Insignia on left sleeve. 4. Collar - Navy blue with three white stripes, cotton fabric - lined. 5. Silk - black polyester fabric. 6. Bow - Navy blue cotton tape. 7. Lanyard - white cotton cord. 8. Lid - Sailor's cap - white plastic with black band with Navy blue chin strap.1 & 2. Maker's label - Red and white print. Hand embroidered red cotton "E. RAYNER". 3. Handwritten blue ink "44" on back of neckline. 4. stamped in black ink " E.W. RAYNER", makers label. 8. Handwritten, black ink "LS MTP ROSS" inside on crown. Tally band embroidered gold thread "H.M.A.S. CERBERUS' on black band.uniform, ran -
Bendigo Military Museum
Uniform - CAP, R.A.N, Australian Government Clothing Factory, 1989
... goldfields CAP, R.A.N. Uniform Royal Australian Navy Ratings cap ...Naval Reserve- Lt. Laurie G. SCHILLING R.A.N. Reserve Refer Catalogue No. 1470.2Royal Australian Navy Ratings cap white, canvas hat with black silk ribbon around the base, with letters embroidered in gold "H.M.A.S." Navy blue cotton ribbon chin strap. Inside of the hat lined with brown cotton fabric and brown leather inner headband lining. makers label - white fabricMakers label - black print "AGCF/Vic 1989 RAN/ SIZE 67^/ No./ NAME/ IDENT. NO 8405.66.075.6071" Handwritten in blue ink "NRC 0087/J????7?" Inside crown- handwritten red ink "COBB B, 0087"uniform, r.a.n -
Running Rabbits Military Museum operated by the Upwey Belgrave RSL Sub Branch
Belt
Army Stable Belt. Royal Australian Army Medical Corps (RAAMC) Yellow, Navy and Reduniform, c1980, army -
Melbourne Legacy
Leisure object - Toy Bear, Legacy Bear $15 - RAAF bear, 2019
In the 2000s Legacy released a range of Legacy Bears to expand the merchandise available for sale during Legacy Week and at other fundraising opportunities during the year. This bear is in a Royal Australian Airforce uniform with a blue shirt and navy trousers. Sometimes special editions of the bears were produced.An example of the type of products sold along with Legacy Badges for fundraising in the 2010-2020s.Legacy bear dressed in RAF uniform with a printed cardboard tag.Printed tag gives the price as $15.legacy appeal, fundraising, legacy bear -
Melbourne Legacy
Leisure object - Toy Bear, Legacy Bear $20 - Navy Camo Bear, 2022
... The Royal Australian Navy's new Maritime Multi-Cam Pattern Uniform... and is in the navy camo uniform. Navy Camo wears The Royal Australian Navy's ...In the 2000s Legacy released a range of Legacy Bears to expand the merchandise available for sale during Legacy Week and at other fundraising opportunities during the year. This bear was new in 2022 and is in the navy camo uniform. Navy Camo wears The Royal Australian Navy's new Maritime Multi-Cam Pattern Uniform commenced rollout in October 2021. It brings uniformity across Defence as it features the familiar design of the Australian camouflage uniform but retains the maritime grey tones a key differences unique to Navy requirements. Sometimes special editions of the bears were produced. In 2021 the price was increased to $20 per bear.An example of the type of products sold along with Legacy Badges for fundraising in the 2010-2020s.Legacy bear dressed in a camo naval uniform with a printed cardboard tag.Printed tag gives the price as $20.legacy appeal, fundraising, legacy bear -
Charlton RSL Sub Branch
Uniform - Blue beret, Navy blue beret with Royal Australian Engineers badge
... Charlton, 3525 goldfields Blue beret Uniform Navy blue beret ...Navy blue beretRoyal Australian Engineers -
Beechworth RSL Sub-Branch
Uniform - Jacket, Battle Dress, Australian Government Clothing Factory, 1981
Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers -
Beechworth RSL Sub-Branch
Lanyard, Battle Dress, Australian Government Clothing Factory, 1981
This lanyard attaches under the right shoulder epoulette of a jacket issued as a Royal Australian Engineers uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was a standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This lanyard is a component of a uniform belonging to CPL K. Howe, the donor provided good provenance, in conjunction with other items of militaria donated by the Howe family. The Uniform can tell a story of multi generations of military service of the Howe familyA length of thick, navy blue, cylindrically shaped fabric. Knotted in two locations to create two loops at either end. One loop is 270mm long when outstretched and the other is 82mm long when outstretched.royal engineers, battledress jacket, battledress jacket khaki, lanyard, royal australian engineers -
Beechworth RSL Sub-Branch
Hat
... peak is illegible. royal australian navy navy hat cap uniform ...Royal Australian Navy officer's peaked cap with a woven dark navy band and off-white piqued top in synthetic material. Patent leather peak is black with green underside. The cap has a black patent leather chin strap that runs across the top of the peak, secured on left and right with press stud buttons. Above the peak is an embroidered insignia of the Royal Australian Navy, a crown with an anchor underneath. Hat brim is stiffened by foam and bears a brown leather band with punched holes, presumably for ventilation. The interior lining is black.Interior tag at back of hat reads "59". Inscription on underside of hat peak is illegible.royal australian navy, navy, hat, cap, uniform -
Beechworth RSL Sub-Branch
Jumper, Square rig, 2001
... Australian Navy, descending from the uniform style of the 19th... in the Royal Australian Navy, descending from the uniform style ...This style of jumper has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Navy blue long sleeved, heavy-weight jumper with square rig collar. On left sleeve is an embroidered patch with the word "AUSTRALIA," underneath which is an anchor insignia and three downward pointing chevrons in gold embroidery thread. On right sleeve is an embroidered patch with the word "AUSTRALIA" on the upper shoulder, underneath which is an embroidered gold wheel on a semi-circle shaped patch. The jumper has a deep neckline, tied with a cotton navy tie. Accompanying collar (0036.2) attaches to the jumper via three navy blue plastic buttons at the back of the neck, and three navy blue plastic buttons running down both left and right interior neckline. The jumper has a zip on the left hand side which runs from the hem to the waist.On patches "AUSTRALIA" Interior label at back of neck reads "ADA/2001/[broad arrow]/NSN: 8405 66 132 2508/SIZE: 111 L/NO/NAME/WOOL/POLYESTER/DRY CLEAN ONLY"royal australian navy, uniform, marine, shirt, australian defence apparel, ratings -
Beechworth RSL Sub-Branch
Naval Ratings Shirt, 2004
... Ratings uniform. shirt naval ratings royal australian navy navy ...This shirt was manufactured in 2004, and was presumably owned by a Beechworth local service personnel by the name of Cross. This piece of clothing would have been worn as part of the standard Royal Australian Naval Ratings uniform.White short sleeved shirt. Square collar with thin navy blue trim. A curved slit on either side of the lower edge (near the hip area) and an extra piece of fabric within each slit. A white label with inscriptions is stitched to the seam in the middle of the lower back seam. This has n written inscription beneath on the shirt fabric.Inscriptions on the label: CAN'T TEAR 'EM 8405-66-132-3767 R.A.N 2004 SIZE: 117 35% COTTON 65% POLYESTER GENTLE WARM MACHINE WASH. RINSE WELL. WARM IRON. DO NOT SOAK. DO NOT BLEACH. DRY CLEAN (A) MADE IN AUSTRALIA Written inscription under label: CROSSshirt, naval ratings, royal australian navy, navy -
Beechworth RSL Sub-Branch
Collar, Square rig, Australian Government Clothing Factory
... Australian Navy, descending from the uniform style of the 19th.... royal australian navy uniform marine australian defence apparel ...This style of collar has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Rectangular shaped collar with three white parallel lines running the border of the collar. Collar is light navy on top and striped white and blue on interior. Collar is held in place with nine buttons on the jumper, there are nine corresponding machine-stitched button holes on the collar. Handwritten on the interior at the back of the neck and on the edge of the square collar is "D. KRUEGER" On interior label on right side, "A.G.C.F./SIZE. 3/8406.66.078.0013/R.A.N./MADE IN/AUSTRALIA"royal australian navy, uniform, marine, australian defence apparel, ratings, collar -
Beechworth RSL Sub-Branch
Tag Name - Individual, NAVY
Traditionally worn on the right side of chest.Polyester cotton Royal Australian Navy name tag in Disruptive Pattern Camouflage Uniform (DPCU) fabric with black embroidery. Black embroidery: DUFF / name tag, dpcu, duff, royal australian navy -
Beechworth RSL Sub-Branch
Clothing - Patch Clothing Insignia NAVY"
Polyester cotton Royal Australian Navy tag in Disruptive Pattern Camouflage Uniform (DPCU) fabric with black embroidery. Black embroidery: NAVY / military force tag, royal australian navy, duff