Lucas Electrical manufactured light and electrical components for many vehicle manufacturers in England and many manufacturers used them as accessories or added extras.Lucas granted Richards Body Builders of Adelaide, Australia, permission to use the phrase 'King of the Road' as their trade nick name.Kidney shaped metal & glass, four lens number-plate & tail light combinationKing of the Road maker's marktail light, stop light, light tail, king of the road light, number plate light

Sewing machine, portable, hand operated, with Premier logo. Has folding crank handle, body painted black with floral design, wooden base and separate wooden cover with lock. Base has compartment with accessories, covered by curved ended, sliding wooden panel. Decorative linework on side, carvings on each corner. Wooden handle on cover is carved in rings, folds down. Below handle is decorative inlaid pattern. Serial number on plate at back of machine. Accessories include 13 attachments, key (broken), screwdriver, sewing machine needle, razor blades (2) and buttons. Attached to inside of case is a square of paper with a number on it. Instruction book for Singer Sewing Machines is included. Also with machine are white tailor's chalk and a cut out, fabric pocket with tissue paper pattern pinned to it.Serial number "579200" is stamped into plate at back of machine. Brand on transfer on front of machine is "Premier". Paper inside case has hand written number "334A". Instruction book "Instructions for using Singer Sewing Machines No. 66 - Oscillating hook for family use" flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, permier sewing machine, hand operated sewing machine, dressmaker, fasion, singer no. 66 manual, textile, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, permier sewing machine, hand operated sewing machine, dressmaker, fasion, singer no. 66 manual, textile

Mannequins such as this were a common decorative item in the mid 19th to early 20th century. They were purely ornamental and were not generally used as a dressmaking accessory.This item is representative of a range of decorative items displayed in homes from the mid 19th to early 20th century and was donated by a Wodonga resident.A mannequin made of wrought iron. It has a metal bow at the waist.decorative arts, metal mannequin

This 10” (ten inch) spirit level was made from boxwood by Barringtons of London. It was used in the making of ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This spirit level is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This spirit level was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Wooden spirit level. Barringtons Spirit level No 650, Warranted boxwood. Made in London. Length 10" (10 inches). Bottom corners are reinforced with metal protection. It has two levels. The vertical level is within a round cut-out in one end. The horizontal level is on the top edge, surrounded by a metal plate with two cut-outs. One side of the spirit level has a ruler marked at 1/16 inch intervals, the other side is marked at 1/8 inch intervals. There is a large circle cut-out in the end that holds the vertical level. Both sides have the manufacturer’s name, the level’s model number and the material it is made of. One side also has the city of manufacture – England. This spirit level is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. 2x “WARRANTED BOXWOOD”, 2x “BARRINGTON’S No 650”, “LONDON”flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, barringtons spirit level, barringtons london, 10” spirit level, sovereign of the sea, ship model, hobby, ship model tool, english war ship, measuring instrument

Sewing machine, Singer, hand operated by crank handle, rounded wood case with lock on one side. Machine has hinges at back and recessed accessory compartment containing pins and needles. Machine has shuttle bobbin. Singer Trade Marks gold transfers on lid and machine, with Singer badge on front of machine. Serial Number "F1841984" on front right. Serial Number "F1841984" on front rightflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, singer, singer sewing machine, dressmaker, taylor, domestic machines

Two red covered auction catalogues for a sale at the Mt. Firebrace (1935) Gold Dev. Co. N.L. Mine at Granya, Vic. On 9th December, 1941. Sale consisted of Mining Machinery, Battery, Cyanide Plant and Costly Accessories. Sale by Order of the Liquidator, Mr. A. J. Phillips, 422 Collins St. Melbourne. J. H. Curnow & Son.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - mt. firebrace (1935) gold dev. co. n.l., mr a j phillips, j h curnow & son, j l jamieson & co, granya hotel, the cambridge press

Two red covered auction catalogues for a sale on 16th August 1939 at Globe Motor Works, Berrigan, N.S.W. Under Instructions from Mr. E.L. Barrett, Trustee in the Assigned Estate of Alfred Francis Jones. Lots sold included Motor Engineers' Machine and Hand Tools, Motor Accessories. J. H. Curnow & Son were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - globe motor works, mr e l barrett, alfred francis jones, j h curnow & son, the cambridge press

Coin holders were used as a convenient way of carrying coins and also as a fashion accessory, worn on a belt or as a necklace. They date from the 19th and early 20th centuries.This item is of interest as an item that was in use a 100 years ago or moreThis is a silver coin holder, circular in shape. It has an outer container with an inner mechanism for placing the coins in and pushing down the lid to hold the coins. It has a ring at the top of the outer container for attaching to a chain. The holder is somewhat battered in places and worn and marked. antiquarian coin holders, warrnambool

Early settlers in Moorabbin Shire were accomplished with needlework and crochet and made their own clothes and accessories. These Silk Scarf and Shawl are examples of the evening wear women made. Lady's Silk Scarf and Shawl are examples of the skilled needlework and craftwork of the women of the early settler families in Moorabbin Shire Lady's cream silk scarf with needle work flowers and loosely plaited fringed and a white voile shawl with lace edging. dressmaking, craftwork, lacework, needlework, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham,moorabbin shire,

The dress and accessories worn by Mrs Margaret Scully for her wedding. Following their engagement in 1956, her husband built their home of 67 years in Box Hill South.'Juliet' style stiffened headpiece and hatpin. Hair piece is covered in same material as used in the bridal gown. Hat pin has top covered in the same material.Lille Couturier Block Court 288 Collins Street, Melbourne.

The dress and accessories worn by Mrs Margaret Scully for her wedding. Following their engagement in 1956, her husband built their home of 67 years in Box Hill South.- Silk brocade (cream) - Rouleau loops, covered buttons from back neck to waist - hook & eye below waist - Rouleau loop, covered buttons wrist to elbow - Mandarin collar - Corded waistband and hem - Dress forms train at back - Shoulder padsNilwedding dress, c 1950's, marriage

The dress and accessories worn by Mrs Margaret Scully for her wedding. Following their engagement in 1956, her husband built their home of 67 years in Box Hill South.- Made from Vilene A65 interfacing - Organza (stiffened) - Bell shaped with added ruffleNilwedding, clothing, handmade, scully

George Harold Merrett married Dorothy Lorna James at Christ church Horsham 14/8/1954. wedding gown and accessories were donated by family members.Worn by groomsmanOne pair male grey gloves size 6 featuring black press clip and 3 darts on front.costume accessories, glove accessories

This tester was used between 1950 and 1980's. As part of the Occupation, Health and Safety requirements, equipment used to monitor the performance of electricity producing generators, regularly, hand held testers were used to check the insulation and the "earth" pin were up the the required operational levels. As the generators and their ancillary monitoring equipment was spread over a large area and cumbersome to service small hand held devices were required. These had to always be safe for the user to operate. A selected range of high quality meters were recalibrated every two years in the Meter and Calibration Laboratory at Yarraville(near Melbourne) This meter is very significant to The Kiewa Hydro Electricity Scheme because it was an integral part of maintaining the electricity producing water driven generators of the power stations. The reason why this meter was so essential is that provided the safety check on equipment used to monitor each Hydro Generator that they were complying within the grid network parameters. Grid parameters are set so that if there is an electrical fault on the system, that fault can be attended to with a very small change in the output stability of each generator. It is essential that the voltage of the network remain within the set limits. Generators are at Dartmouth, Mackay, Clover, West Kiewa, Yarrawonga, Cain Curran and three Power Stations in the Thornton area.This hand driven current generator produces 500 volts by winding the handle(on funnel curved side) to keep the voltage constant(one minute per test). The whole body is made from caste aluminium. One of the functions of this meter is to test the isolation resistance of any equipment being tested. This is to see if that equipment is safe to handle(no electrical shocks). The second function is to test the earth pin of any portable electrical equipment. The turn key on one side can direct which function is required(marked insulation or continuity). On the top side(enclosed in a glass fronted marked scale) is a continuity scale(top) and an insulation scale(bottom). This is covered , when not in use by "flip up" lid with manufacturer's details and name of the instrument. Opposite the winder are two screw tight knobs. One marked earth(left side) and one marked line(right side). On the top and next to the glass windowed scales in a post manufacture SEC Vic equipment equipment ID number. For carrying purposes there is chromed steel (fold together) handle.The bottom of the unit has two metal "feet" 150mm long by 114mm wideManufacturer's details on top side "MEG" underneath "INSULATION AND CONTINUITY TESTER" below this "constant 500 VOLT pressure" below this "REGISTERED MEG MEGGER TRADE MARK" below this "REG DESIGN NO. 690326" below this "UNITED KINGDOM PATENT Nos. 193746, 197178, 198182, 202062, 202398, 204649, 350715" below this "SUPPLIED BY THE GENERAL ELECTRIC Co. Ltd OF ENGLAND" below this "MAGNET HOUSE, KINGSWAY LONDON W.C.2" 'sec vic kiewa hydro scheme, alternate energy supplies, alpine feasibility studies temperature, rainfall

This case was used between 1950 and 1980's. As part of the Occupation, Health and Safety requirements, equipment used to monitor the performance of electricity producing generators, regularly, hand held testers were used to check the insulation and the "earth" pin were up the the required operational levels. As the generators and their ancillary monitoring equipment was spread over a large area and cumbersome to service small hand held devices were required. These had to always be safe for the user to operate. A selected range of high quality meters were recalibrated every two years in the Meter and Calibration Laboratory at Yarraville(near Melbourne)This leather case contains a meter which is very significant to The Kiewa Hydro Electricity Scheme because it was an integral part of maintaining the electricity producing water driven generators of the power stations. The reason why this meter was so essential is that provided the safety check on equipment used to monitor each Hydro Generator that they were complying within the grid network parameters. Grid parameters are set so that if there is an electrical fault on the system, that fault can be attended to with a very small change in the output stability of each generator. It is essential that the voltage of the network remain within the set limits. Generators are at Dartmouth, Mackay, Clover, West Kiewa, Yarrawonga, Cain Curran and three Power Stations in the Thornton area.This carry case is made from leather hide and cloth covered cardboard insert. The front side has a lockable English made suitcase fitting. It has a broken carry strap (leather) travelling from top and through leather strap holders both sides and on the bottom of the case. A State Electricity Commission of Victoria identification tag riveted onto the top lid "ELECTRICAL ENGINEERING SECTION No. 1483"sec vic kiewa hydro scheme, alternate energy supplies, alpine located electricity generators, mobile measuring equipment

This hair accessory is part of collection donated by Mrs. Jean Raper. It belonged to her great grandmother Mrs. Eliza Reardon. It was used to keep a bun or other hairstyle in place.This item is from the Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper.A hair pin/comb or decoration used to secure a woman's hair bun in place. hair decorations, fashion accessory, women's jewellery

At the turn of the 20th century cigarette smoking was widely adopted, and elegant smoking accessories became a necessity and items such as this desk dispenser became a popular trend for fashionable men and women. Evidence of trends in the early 1900s.Rectangle metal cigarette dispenser mounted offset on a dark green painted timber base. The tin slides up on an inlay wall rail allowing the tin to slide up and down but not come of the wall. Tin lid is removable to allow the container to be filled The inside internal walls of the tin are angled so that when the tin is lifted it pushes a cigarette into the inset holder to dispense a cigarette. Bottom of the base is lined with green felt.On the top of the lid: 'Cigarettes' in script font.cigarettes, smoking, tabacco, trends

Hand operated sewing machine made in Germany in the late nineteenth century. Mrs Weiss, a young Templer Lutheran living in Palestine, owned it and took it with her to Heluan, Egypt, where Germans in this region were interned during WWI. Her permission to take it was dependent on her sharing the machine with other internees. When the Templers in Palestine were interned in WWII, the sewing machine accompained Mrs Weiss and her family to Tatura in 1941 on the condition that other imternees would also use it. After the war it was taken to South Australia where its use by Mrs Weiss continued until they replaced it with an electric machine.Wooden case/cover for hand operated sewing machine. Has silver metal collapsible carrying handle and metal keyhole. Has Decorative inlay border on top and around handle. Metal hand operated table top sewing machine, painted black with gold decorative pattern. Hinged to a wooden base. Drawer built into base with sliding panel for holding accessories.Kayser, Johannes Weiss, Christine Weiss.sewing machine case, kayser, tatura internment camps, templer, palestine

This compass as used by Noreen Cuthbertson when she was teaching at St Joseph's Catholic School ,in Orbost. These blackboard accessories were common in the classroom in a time before whiteboards became the norm.This item is an example of an item commonly used in schools before the 21st century.Two wooden pieces which are joined by a wingnut so that it can be opened or closed and held in position. It functions as a chalkboard compass and was used by schoolteachers. One end holds a piece of chalk. The other has a black pointed tip to mark the centre of the circle to be drawn.Noreen Cuthbertsoneducation chalkboard compass st-joseph's-orbost

Ross Motors operated a car dealership in Fairy Street in the mid 20th century. They sold a number of different makes of vehicles as well as sales and service of milking machines and car accessories.A link to a Warrnambool business.Cream oval plastic disc for key ring. Black text.Ross Motors Pty Ltd Warrnambool. Distributors of Buick, Pontiac, Vauxhall, cars and Bedford trucks. Phones : 213, 219. On Reverse: Finder of these keys please return to address on reverse side.warrnambool, ross motors, car dealership warrnambool, milking machines, buick cars.

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. The dress was purchased, and worn by Kathleen Gervasoni, a long term resident of Kew, Kew Historical Society member and mayoress of the former City of Kew (1978-1979). It is part of a collection of clothing and accessories donated to the collection by her.Black velvet, black and majenta organza, taffeta underskirt, large black satin bow, drop waisted evening dress, made to order for the donor from a boutique in Ivanhoe. women's clothing, evening dresses, kathleen gervasoni, australian fashion - 1980s, evening wear

This sturdy, deep hat box has been carefully constructed to give the contents utmost protection in the roughest of travel conditions. At the same time, attention to detail and quality of materials makes the box an attractive, desirable and useful piece of luggage. The supports inside the hat box show that the hat’s brim dipped at the front and back in the popular 1920s Homburg or Derby style. The hat box was likely to have been purchased, complete with its fashionable hat and personalised with the initials ‘G.M.’. The five shipping labels on the hat box tell that the owner traveller overseas with it on more than one occasion. The owner had first travelled with the shipping line Peninsular & Orient Steam Navigation Company, and may have been one the first Australian passengers in 1932, as the remnant of label on the base reads Sydney. The owner later voyaged under the company’s new name of P & O. and travelled from at least one of the voyages from Melbourne to London The square label, with “P & O” and red printed “M” in centre of circle, refers to alphabetical organisation of baggage by surname, connecting the owner ‘G.M.’ to the owner’s voyage with P & O. The P & O shipping line’s early beginnings started with the partnership of London ship broker Brodie McGhie Willcox and Scottish sailor Arthur Anderson in 1822. The partnership was joined by Irish shipowner Captain Richard Bourne in 1835 and they began operation as the Peninsular & Orient Steam Navigation Company with a service between London- Spain - Portugal. In 1932 the company expanded to include Australia with its passenger services departing from Sydney; in 1840 the company was incorporated. After various take-overs of other shipping lines and businesses, it operated under the name P & O. JOHN BRUSH The hat box was made by Australian saddle designer and maker, John Brush, Sons & Co. Brush began his saddlery trade in Roma, Queensland, His designing process included consulting with the men who rode and worked the horses. He was described in the Sydney Morning Herald of December 15, 1897, as a leading Sydney saddler, well known and reliable, with every kind of English and Australian saddle on view. John Brush established his business in 1840, operating from 371 George Street Sydney. A catalogue from that era jointly advertises John Brush (371 George Sty Sydney) and Butlers & Brush (432-4 Queen Street Sydney), both under the name of Edward Butler & Co. Pty. Ltd. The catalogue included saddlery, harness equipment, riding wear and travel goods, and strongly promoted the Wienkek made saddles, which he distributed Australia wide. John Brush, So & co. advertised its ‘new’ address in 1887, as 403 George Street Sydney. In 1898 Brush made a side-saddle for a customer, a design popular with gentlewomen of the era. The business was still operating over 100 years later, producing a catalogue in the 1950s.This early 20th century hat box is significant for being one of a kind in our Collection. Its fitted design shows the shape of the hat, dating it from the 1920s men’s fashions. The hat box is significant for being a high quality hat box made in Sydney, Australia by prominent and successful early colonial saddler and leather goods business, John Brush, Son & Co. The labels on the outside of the hat box are also significant, representing the prosperous lifestyle of an Australian traveller who purchased quality goods and cared for them. The traveller was able to depart from firstly the Port of Sydney and later the Port of Melbourne. Hatbox, oval shape, brown leather, strong, sturdy construction, six pieces, and metal lock on base. Wide lid, then tapers to a narrower base that has a red leather trim. Brown velvet fabric lining inside and covers some accessories. Other internal accessories are trimmed with plain red paper and blue and white striped paper. The lid has two attached leather tabs and a leather handle and underneath it has a drawstring liner and oval, gold-lettered maker’s label. The internal oval box has a leather retention strap and brim support. Separate moulded brim support is included. A detached leather strap with catch is inside the base. Inscriptions are stamped on the lid, printed on the maker’s label, attached as printed paper labels to the lid, sides, and under the base. Maker is John Brush, Son & Co. of Sydney. The owner’s initials “G.M” are embossed on the lid.Stamped on lid “G. M.” Label, oval, inside lid “JOHN BRUSH, SON & CO. / MANUFACTURERS & IMPORTERS / of / SADDLERY AND HARNESS / 403, GEORGE ST. / SYDNEY” Label, paper: “BAGGAGE, MELBOURNE TO LONDON’, part of word ‘CABIN’ and “P & O” Label, square, white background, black print, circular emblem: ‘PE - - - - - & ORIEN-’, ‘STEAM NAVIATION COMPY.’ BAGGAGE’ and a red printed “M” in centre of circle. Label, rectangular, white background, black print; narrow line border, text in rows and an ‘X’ overprinted, from corner to corner of the border: “BAGGAGE / P. & O. S. N. Co. / MELBOURNE / To / LONDON” Label, paper, rectangular, white background, black print, an “X” across the label: “CABIN / P & O / “ Label, paper, on base, “– aid” [Paid], “SYDNEY” flagstaff hil, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, hat box, leather hat box, vintage hat box, top hat, homburg hat, derby hat, travel ware, luggage, leather goods, travel goods, clothing accessory, men’s clothing, john brush, son & co, saddler, sydney firm, peninsular & orient steam navigation company, p & o, g.m., melbourne to london, sydney port, melbourne port, hat case

This lady's parasol is typical of what a lady would have used in the late 19th century as a fashionable accessory as well as shielding her complexion from the sun. It has no known local provenance.This very attractive item will be very useful for displayThis folding parasol has a black wire frame, a white handle with a brass inset and a white knob at the end. There is another knob at the top end of the handle. There is a mechanism for folding and unfolding the parasol on the handle.The undercovering is cream sateen with frilled edges, overlaid with black lace. There is a cream grosgrain bow at the top .parasol, vintage clothing accessory

George Harold Merrett married Dorothy Lorna James at Christ Church, Horsham 14/08/1954. wedding gown and accessories were donated by family members. Photo of wedding couple.Cream lace dress and train overlaying pink satin with attached cream taffeta half slip trimmed with 4 cm cream lace inserted with blue ribbon. Design is scalloped sweetheart neck, dropped waist line and 34 pink satin covered buttons down centre back of the bodice. Sleeves are crossover cap sleeves and 180 cm train from centre back waist line. Pair of elbow length cream kid gloves, three pearl buttons at wrist and cream net horseshoe with apple blossom and pink rayon horse shoe. Full length cream veil attached to pearl and blossom headdress. See also NA4231 Mauve Bridesmaid's dress, NA4138 Mauve hat for bridesmaid's dress and NA3949 Mauve fingerless gloves for bridesmaid's dress.costume, female ceremonial

George Harold Merrett married Dorothy Lorna James at Christ Church Horsham 14/08/1954. Wedding Gown & all accessories were donated by family, plus wedding photo.Mauve Damask satin full length gown. Shaped bodice with pin tuck detail over bust line, pin tuck shawl collar across back. Zip closing down back, full flared skirt. Bodice lined with rayon.|Refer to 3985.1-5, 3949.1-2, 4138, 3999.1-2, 4000.1-2costume, female ceremonial

c1900 Decorative silver 'pill boxes' were popular accessories carried in a small purse by women for evening and special occasions . This 'pill box' was used by a lady in the family of Ailsa Hunt in Moorabbin SSmall decorative silver pill boxes were a common accessory for early settler women in Moorabbin Shire c1900A small rectangular white metal pill box with gold lining, a hinged lid and snap lock machined pattern on lid with beading on edgeclothing, pill boxes, silver, pewter, brass, evening bags, victorian fashion, edwardian fashion, market gardeners, early settlers, moorabbin shire, bentleigh, mckinnon, moorabbin, cheltenham, wedding dresses, evening wear,

This machine was made in Baden, Germany, for the Ward Brothers of Melbourne, who imported machines from various manufacturers and had them branded with their Ward Brothers decals. This machine is most likely dated after 1911, when the Ward Brothers became two separate businesses, as there are only remnants of two portrait decals on the machine bed. There is a fitted embedded ruler in the wood of the base. Many sewing machine manufacturers in Germany produced their machines specifically for export. A company could mass-produce its machines and give the same product several different brand names, according to their overseas buyers. There was a huge market for domestic machines as it enabled tailored clothing to be made in households at a fraction of the retail prices. Ward Brothers began in Australia in the late 1890s and early sewing machines sold by them had the three brothers on their decals. In 1911 the brothers divided into two separate firms, one operating on his own, the other two remaining together, and all still operating in Melbourne and at first still using the name Ward Brothers.This sewing machine is one of two hand-operated Ward Brothers machines in our collection that were made in Baden, Germany, and the only one that has the two Ward Brothers on its decal and that has side to side slide plates. This machine represents the early domestic market for sewing machines, making it possible for the everyday homemaker to produce fashionable garments and linen ware that was affordable. The owner of this machine could work at more than one location as it was portable and did not require a large space to set up. The machine is associated with the well-known Ward Brothers of Melbourne, who sold imported sewing machines that were branded with their own name.Sewing machine with case. The black-painted metal machine is hand-operated and the crank handle is wooden. The machine is on a wooden base and has a box included that contains many machine accessories. Made in Baden, Gemnamy, for Ward Brothers of Melbourne. There is an attached metal plate on the front with rows of groups of numbers on it. The wooden bed has an embedded ruler. The machine had decals with geometric designs and the maker's name.Printed in script: "Specially made in Baden / by Ward Broth Melbourne"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, sewing machine, hand operated, domestic sewing, homemade clothing, fashion, ward brothers, made in germany, baden, front and rear slide plates, post wwi, post 1911