Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Complete laryngoscope used by Dr Lennard Travers. Medium sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal. The handle has a serrated grip for easy use and it is also a container for two batteries, it has a switch on its base. The full piece has visible and deep scratches over the top of blade around the stamped blade type inscription. The base of the blade has a worn surface with a slight discolouration due its use. No presence of led light bulb on blade. Minor scratches on handle base battery deposit with an ON - OFF switch black button. Stamped on blade, FLAGG LARYNGOSCOPE Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, laryngoscope, flagg blade, button, battery handle, straight blade

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Small sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal with light bulb attached. The piece has a general excellent condition and brightness over its surface. The laryngoscope blade type is stamped on top of the blade and the manufacturer seal is located at the base back side of the blade. Stamped on top of the blade, FLAGG LARYNGOSCOPE Stamped seal at the base back side, W/A [inside a triangle shape]flagg, light bulb, straight blade, welch allyn company (wa)

6A Built in 1901 and painted two-tone green, this locomotive was issued to the Colac to Beech Forest line and was used in that line’s construction. Over the years, it saw service on all four lines, but mostly on the Colac to Crowes and Upper Fern Tree Gully to Gembrook lines. It was temporarily withdrawn from service in 1958 and returned to service at Belgrave in 1962 for the reopening of this line where it saw almost continuous service until being withdrawn in 1983. It has been restored, as far as possible, to its original condition with original design side tanks, low bunker, original size windows, etc., but a steel cow-catcher in place of the original style wooden one. It also has its original colour scheme of two-tone green with white lining. Loco: 6A In service Thursday, 18th July 1901 Livery two-tone green Owner Puffing Billy Gauge 762mm / 2' 6' Status Preserved - Operational Service History : Jul 1901 Colac - initial allocation of a new locomotive Jul 1901 - Nov 1908 Colac Mar 1909 - May 1909 Wangaratta Jun 1909 - Other Oct 1909 - Oct 1910 UFTG. Nov 1910 - Feb 1912 Colac May 1912 - Jun 1912 Wangaratta Jul 1912 - Sep 1914 Moe Oct 1914 - Aug 1924 Colac May 1925 - Jul 1927 UFTG. Aug 1927 - Oct 1928 Moe Jan 1929 - Sep 1930 UFTG. Sep 1930 - Jun 1932 Moe Dec 1932 - Workshops May 1933 - Colac Sep 1933 - May 1936 Moe Jun 1936 - Oct 1936 Workshops Oct 1936 - May 1942 UFTG. Sep 1942 - Apr 1949 Colac May 1949 - Apr 1950 Workshops May 1950 - Dec 1957 UFTG. Feb 1958 - Apr 1962 Workshops May 1962 - Belgrave - In Active Service at Puffing Billy Railway BelgraveVictorian Railways - Narrow Gauge NA class steam locomotive number 6A Victorian Heritage Register (VHR) Number H2187 Puffing Billy Locomotives and Rolling Stock Collection Dates that 6A worked on the Gembrook Line Nov-1909 to Nov-1910 May-1925 to Aug-1927 Jan-1929 to Sep-1930 Oct-1936 to Sep-1942 May-1950 to Feb-1958 May-1962 - Returned to Gembrook railway Oct-1977 - Transferred to PBR ownershipSteam Locomotive - with wrought iron frame with cast iron cylinders6Apuffing billy, victorian railways, narrow gauge, steam locomotive, 6a, 6na

0-6-2 Tank Locomotive No.1 "Delta" Gauge 2'0" Identification: 1 Delta Type: 0-6-2T Builder: Perry Engineering, Mile End, South Australia Builder's number: Perry 7967.50.4 of 1950 Building date: 1950 Current status - Static Exhibit Wheel Arrangement 0-6-2T Cylinders (Diameter X Stroke) 10 inches X 18 inches Boiler Pressure 180 psi Driving Wheel (Dia.) 28 ½ inches Weight 16 tons Coal Capacity 27 cubic feet Water Capacity 500 gallons The Perry Engineering Co, Mile End, South Australia built a total of 18 locomotives for the 2’0” gauge tramways used by the sugar industry in Queensland. This 0-6-2T locomotive was built by Perry Engineering Co. Ltd. of Mile End, Adelaide as their Builder's No. 7967.50.4 of 1950. It was used at Qanaba Mill, Bundaberg where it was known as No.1 "Delta". / Qanaba Mill No.1 No. 1 “DELTA” 0-6-2 TANK LOCOMOTIVE Gauge: 2 foot Built by Perry Engineering Company of South Australia in 1950 (Builder’s number 7967.50.4), “DELTA” is a medium sized Australian designed locomotive featuring Walschaert’s valve gear driving piston valves. Weighing 16 tons (16.3 tonnes) it was one of the post-war narrow gauge steam locomotives, which worked in the canefields of Queensland until 1978. “DELTA” worked at various sugar mills in the Bundaberg area and was finally withdrawn from service at Quanba Mill after a life of 28 years. Obtained by the Puffing Billy Preservation Society in 1981. Delivered to Australian Estates Co., Kalamia Mill named DELTA in 1950. Purchased by Fairymead Mill as No 20 DELTA. Purchased by Millaquin Sugar for Qanaba Mill as No. 1 DELTA, 1970 Withdrawn from service, 1978. Obtained by Puffing Billy Preservation Society for display at the Puffing Billy Museum.Historic - Industrial Narrow Gauge Railway - Steam Locomotive used in Queensland in Sugar Mill service. Locomotive No.1 "Delta" - Steam Locomotive - made of steel, and wrought ironDelta0-6-2 tank locomotive no.1 "delta" perry engineering - puffing billy railway perry 7967.50.4 of 1950, puffing billy, qunaba sugar mill, bundaberg, perry engineering, delta, steam locomotive, 0-6-2 tank locomotive no.1

The dolls house and furniture was made by Heinrich August Ernst KOCH, who was interned at Orange NSW on the 6 June 1940. In 1941 was taken to Tatura VIC for an appeals tribunal hearing. He was released in 1943 to the Civil Alien Corp. The donor of the dolls house, John Smiles, is the grandson of Heinrich. Heinrich made the dolls house and furniture which he made for his daughters in Sydney NSW. It was sent to them whilst interned. The furniture is copies of real life size items and the house has features common with the family home in Sydney.Wooden, painted dolls house, made from packing crates. 5 main pieces with additional pieces (roof, chimney, stairs, outside roof area, furniture) which go together to form this long single story dolls house. Painted in cream with green features and red roof. Windows and doors open. Several windows have glass in them. Original piece of Lino in kitchen area. 2 rooms are wallpapered. Original pieces of furniture are included (see list attached to worksheet). These include dining table and four chairs, side board, dressing table, bed, tall boy, low boy, entrance table, entrance bench, entrance hall stand, kitchen table, 4 chairs and 2 benches.heinrich august ernst koch, john smiles, orange internment camp, tatura internment camp, civil alien corp

The knitting needle gauge was used as a guide to the needle sizes used in Britain and Australia before metric measurements were adopted for weights and measures in the mid 1970's.A silver metal knitting needle gauge in the shape of a bell with different sized holes in the middle numbered from 1-5 and slots around both sides numbered from 6-22. These holes were used as a guide to gauge the size of knitting needles. The numbers and lettering have been engraved into the metal.KNITTING / PIN SIZE / IS WIDTH / OF SLOTShandcrafts, knitting, knitting gauge, george evans collection

THE DUKE & DUCHESS OF CORNWALL & YORK - LATER TO BECOME KING GEORGE & QUEEN MARY - DURING THEIR VISIT TO AUSTRALIA IN 1901 FOR THE OPENING OF PARLIAMENT AT FEDERATION. THIS PHOTOGRAPH WAS TAKEN OUTSIDE THE BALLARAR EAST TOWN HALL DURING THE GRAND TOUR..1 FRAMED BLACK AND WHITE PHOTOGRAPH OF THE VISIT TO BALLARAT OF THE DUKE & DUCHESS OF CORNWALL & YORK. .2 - .6 COPIES OF PHOTOGRAPH, VARYING SIZES. ONE LAMINATEDlocal history, photographs, duke and duchess of cornwall & york, federation, 1901

* ITEMS HELD IN ST. ANDREWS CHURCH ARE NO LONGER IN PLACE NOW THAT WESLEY HAVE TAKEN IT OVER - 2023FOLDER OF COLOUR PHOTOCOPIES OF PHOTOGRAPHS DEPICTING MEMORIALS AND HONOUR ROLLS OF THOSE MEN AND WOMEN OF CLUNES AND DISTRICT WHO TOOK PART IN WORLD WARS 1 & 2. .1 Plaque - A Souvenir of Great World War .2 Wooden Honour Roll WW1 in St. Andrew's Church, (former Presbyterian Church), Service Street, Clunes *CHURCH TAKEN OVER BY WESLEY CHURCH CLUNES - 2023, now kept at the RSL Sub Branch, Fraser Street, Clunes .3 Wooden Honour Roll WW2 in St. Andrew's Church, (former Presbyterian Church), Service Street, Clunes *CHURCH TAKEN OVER BY WESLEY CHURCH CLUNES - 2023, now kept at the RSL Sub Branch, Fraser Street, Clunes .4 Wooden Framed Roll of Honour Board from the Clunes Methodist Church and Sunday School, now kept at the RSL Sub Branch, Fraser Street, Clunes .5 Wooden Roll of Honour for WW1 from the Glendaruel State School No. 281, now kept at the RSL Sub Branch, Fraser Street, Clunes .6 Wooden Honour Roll for WW1 and WW2 from the Tourello School, now kept at the RSL Sub Branch, Fraser Street, Clunes .7 Wooden Roll of Honour from A.N.A., Branch No. 12, now kept at the RSL Sub Branch, Fraser Street, Clunes .8 Brass plaque honouring men and women who served in the wars of 1914-1918, 1939-1945, Borneo, Malaya, Korea and Vietnam .9 Brass plaque with names of men killed in WW2 .10 A3 size image of WW1 Roll of Honour, Clunes State SchoolSee above images for inscriptions and nameslocal history, photography, photographs, christine rowe

Contains names of teachers and students of the time. Headmaster was Roger SandersYellow printed card cover with A 4 size black and white printed pages. Contains contributions from members of all classes Preps to Grade 6 Stapled at spineSee photo

Murray Views No. 6. Willow Walk Cato Park. Photograph of willows overhanging Cato Park lake. Two small photos of Murray View appear to be original photos both are the same size. Two small black & white photos of Willow Walk Cato Park Stawell and one enlargement. The photo is by Murray View No 6. The view shows the willows overhanging Cato Lake. Murray Views No 7Murray View No 6. Willow Walk The Lake Cato Park Stawell Vic. Murray Views No 7 stawell

Originating from Scotland pre-1950, this wool winder is ornately decorated featuring a male figure at its peak and a cherub at its base. Wool Winders are practical objects typically with minimal decoration; however, Wool Winders with ornate design features do exist. Scrimshaw (whale ivory) was a popular choice of material in the 18th and 19th century. It is smooth, preventing yarn from getting caught when unwinding, as well as having artistic beauty. Wool winders require a heavy base, as to not topple over when in use. It is popular to decorate these bases on more elaborate winders, such as shown in this example. The bows featured to tie the wood segments together is another feature of more elaborate models of wool winders, also highlighted in this example. This winder began life in the possession of Annie Crawford. The Crawford name has a strong connection with the town of Paisley, Scotland, and its Woollen Mills. The Crawford name can be seen working at the Woollen Mills in the 1851 Scotland Census, with Robert and his brother’s James and John working as Wool dyers. Their father Alexander also worked as a Loom Weaver. The winder immigrated with Annie when she, her husband and 3 children travelled to Australia, ready to start a new life. Most of their possessions were left behind in Scotland. This winder accompanied the family on their journey; so it stands to reason that the winder was special to them. Annie Crawford passed the winder onto her eldest daughter Joan Crawford. Joan did not have any children and so she passed the winder onto the eldest female grandchild, Fiona Crawford. Fiona Crawford continued the connection of the Crawford name with textiles, with an exhibition titled "When you go looking for me, I am not there". Utilising medieval embroidery tradition of ‘Punto Assisi, the exhibition was a reflection on the lack of women recorded in history, particularly their contribution to the domestic arts. Her work investigates both the absence of women while also honouring the unknown female makers of this now highly desired art. The Wool Winder was donated to the National Wool Museum in 2021 by Dianne Crawford, the sister of Fiona Crawford. Umbrella swift style wool winder made of metal, wood, and ribbon. Decorated at its highest point with a sculpted man standing on one leg, holding what is perhaps a rolled newspaper as though he may be bidding at an auction. Or perhaps he is holding a hank of wool. The man stands upon a three-tier platform of decreasing size and design which leads to the central metal shaft. At the base, the winder is decorated with an engraved cherub. Both figures have a small hole in one of their hands, indicating that they originally held something. Unfortunately, it is not known what this is. From the central metal shaft, this winder has 2 rows of 6 arms radiating out. These arms cross in the middle to form an X. These arms are also connected horizontally with additional arms which cross. This all forms an intricate web design, tied together with ribbon. The size of the web these arms create is adjustable, to accommodate yarns of different length. Beneath the second row of arms is a locking screw which holds this row at the desired height and width. This entire top section, beginning at the central metal shaft, can be unscrewed from its base for easier storage. The base begins in a wooden circular shape growing into a smaller ornately designed raise on which the cherub sits. From the head of the cherub the central metal shaft begins.paisley, scotland, wool winder, immigration

Jumper size 18 Grey/Pale Olive Green colour -Emblem on left breast -Square outlined in black, pale blue sky, 5 undulating stripes along bottom of square; purple yellow, green yellow orange : 6 gum leaves in upper right corner of square, yellow/ orange/Green/orange/yellow/yellow all with green central vein. Yellow stitched writing underneath emblem City of Nunawading parks ans Recreationcostume, male uniform, civilian

Needle case is part of a collection of sewing tools donated by Betty McPhee.Green mottled leather wallet style case containing sewing needles of various sizes. Includes 5, 4/8, 6 rug, crewel, darners, chenille.handcrafts, equipment

Cream card with red and black graphics and lettering with 6 'snap studs' Size 1Snap fast British snap stud - size 1 Actual sizes stocked in Nos 000, 00, 0, 1, 2, -. Guaranteed Rustless Made In England.domestic items, sewing, costume accessories, haberdashery

Cream Lady Pelaco blouse. Size 12. Five front covered buttons with 6 rows of stitching on either side of opening. Peaked collar with tie front.Long sleeves with covered button at wrist.Pelaco Ladycostume, female

Central Highlands Historical Association [CHHA] is a vital link in the regional history network being the umbrella association for over 30 historical societies, museums and family history organisations in the central highlands region of Victoria. CHHA continues to be an active and innovative organisation. It is represented at Local and State levels on matters of joint concern to its members. Aims and Purposes: Formed in 1984 the inaugural CHHA meeting was held on Saturday 23 June 1984, at the Ballarat City Library in Camp Street, Ballarat. A main focus of CHHA is to assist its member societies by developing and maintaining resources and information networks. To promote history and heritage in the region To encourage the preservation and conservation of heritage To promote and encourage easier public access to records through local museums and societies 6 coloured photographs postcard sizenonechha, central highlands historical association, dorothy wickham, clare gervasoni, raymond shuey

White Cap, black rimmmed with gold laurel containing crown and anchor.Halls hats pty ltd Sydney 1981. RAN No. Name and “Made in NewZealand”; and indicates 6 and 7/8 inches hat size.ran, royal australian navy, naval headgear, navy cap

A4 sized coloured card covered book published by Williamstown High School commemorating the 2008 Year 12 cohort. 126 pages the book contains a summary of the Year 12 school year: camps of the last 6 years; debating, sport report, art and theatre, world challenge; student profiles and photographs of most students and teachers. Also in DVD format. (2 DVDs in our collectionwilliamstown high school, 2008, school yearbook, year 12 2008

Plans for the permanent camp site used by Melbourne Legacy in the second half of the 20th century.Most of the Junior Legatees would have stayed at Lord Somers' camp, which is still in use.6 photocopied plans and 1 cover sheet - A4 size - black on white, single sided.camp, lord somers camp, power house, eppalock

Printed program for Box Hill - Nunawading - Doncaster Branch of Melbourne Legacy Annual Meeting and Dinner held at Blackburn R.S.L. on Wednesday 6 May 1964. Contains words to the Legacy Code: “The Spirit of Legacy is Service”. Inside is the Third Annual Report of the Branch by J.N. McAuley, Chairman. Annual Dinner program on the back coverDetails Branch activities over the previous year. White paper folded to A5 size with blue type printed both sides.legatee event, branch