This operating and parts information sheet was supplied to consumers to help users of this kerosene iron, not only understand the operation of this self lighting iron, but also to be able to order any replacement parts that may be required for this high level usage appliance. At this period in time(1950's), this item was at the leading edge of ironing technology. During the earlier 1900's and before "the throw away" culture evolved(circa 1950's), reliability and long term application of domestic appliances was a necessity above all costs, especially in isolated rural areas. The construction of these appliances was geared to a longer service life and not to a cheaper two to three year life warranty. With levels of world wide technology at an ever increasing pace, long term reliability of any appliance was no longer sought after. Appliance upgrades and new improved model accessibility especially in rural areas has changed rural consumer's buying patterns. Although the concept of instructional and parts/warranty information booklets has not become obsolete, the ability to access information via electronic means has vastly improved the ability to obtain qualified technical help through local avenues. This access was not available in the time period(circa 1950), when the appliance covered by this document was issued. The rate of development within the home appliance field has mushroomed during the time period post 1950. The costs and the increased levels of product choices and consumer awareness has provided rural areas (once isolated e.g. Kiewa Valley) with a greater ability to satisfy their needs because of a greater diverse range of domestic appliances offered.This discoloured, sepia paper has black print and is folded into three equal pages. The information contained covers operational and part numbers for the kerosene fired hand held iron. there are kerosene stains on the last page and these have soaked through onto the second page. The form no.-3-3C- McACO.-4363Printed in U.S.A.instructions, household appliances, ironing, domestic ironing

The ceramic insulators were used by the PMG to insulate telephone lines connecting to the lightstation accommodation. The installation of a single galvanised wire telegraph line in 1873 provided the lightstation with a vital link to the outside world via Morse code. In 1875, the Australasian Sketcher reported on the new facility, writing that ‘the lighthouse on the extreme point of the promontory is connected with Melbourne by a line of telegraph, and as a large number of vessels pass in sight of the lighthouse, useful information is gained respecting their movements’.The system was immobilised in 1885 when a thunderstorm caused some of the poles to explode and connection wires to fuse and turn into molten metal. During WWII the lighthouse line was upgraded to four copper wires, and in 1971 a radio link replaced the line. The lines required constant maintenance. Some poles remain along the length of the promontory’s Telegraph Track as reminders of this former communication link. Insulators can also be found in the collections at Cape Schanck; Cape Otway and Gabo Island. Comprises a white ceramic insulator attached to a rectangular metal plate.

Yields information about the front streetscape of the SEC depot Ballarat following its refurbishment and one of the trams in use at the timeBlack and white photo print from a collected negative of Ballarat tram No. 32 passing the depot gates with the depot building in the background. Taken soon after the SEC upgrade of the building and track work - approx. 1935 or 1936. Shows toilet on south west corner, gates and fence between he depot and the future tennis court. Tram has destination of 'Gardens via Drummond Nth'. Copy 2 - better print - ex moveable display panels Colour photocopy laminated, of this photograph on display 6/2000 at 02-02-06 Copy 3 - large format print (203H x 253W) - added 28/7/2007, ex Alan Bradley holding of prints, received 5/2007. See also Reg Item 3902 for a mounted set of this photographs along with those of Reg Item. 1350. High res scan of negatives added 13/5/2020 See The Ballarat Tramways, by Keith Kingstramways, trams, wendouree parade, sec depot, rehabilitation, depot, tram 32

.1 - Newspaper clipping, The Age 3/8/1992, titled "Tram review in doubt as PTC faces funds cut", written by Jacqui Macdonald Transport Reporter, with a photo of Mr Spyker, Transport Minister. Quotes Mr John McMillan, DG of Transport, re issues of getting cabinet support for planned upgrades, storage of W class trams, unions, conductors, work practices, cross linking of tram routes, rail and buses. .2 - Editorial, The Age, 2/7/1992 - titled "Tramway plan offers reform at a price" - about the proposed plan to restructure the public transport system, W class trams, operations and the revolt against scratch tickets. .3 - Newspaper clipping - The Age - 3/4/1992 titled "Report criticises run-down trams" abort the report by Workshops director John Barry, the condition of W class trams, stored B class trams, sub-stations and maintenance.trams, tramways, budgets, ptc, unions, w class, b class, public transport, funding, operations, scratch tickets

In 1872 William Tulloch and Alexander McLaren constructed a new brick 'Royal Standard Brewery' to the design of architect Henry R. Caselli. They had been operating a much smaller 'Royal Standard' Brewery, possibly since 1859. The Ballarat Brewing Company was established in 1895 and took over operations of the 'Royal Standard'. This new company resulted in the merger of the 'Royal Standard Brewery', James Coglans 'Phoenix Brewery' (Warrenheip) and Henry Leggo's 'Barley Sheaf Brewery' (Creswick Rd). J. Coglan and W. Tulloch were principals of the new company. By 1912 the Ballarat Brewery buildings fronting Armstrong Street were upgraded and new plant installed. Ballarat Brewing Company was well established as a thriving business. In 1926 'Ballarat Bertie' (the cellar-man) advertising image was introduced. It was used successfully until 1994 on 'Ballarat Bitter' labels. During the1940s and 50s the Ballarat Brewing Company was significantly upgraded and extended equipment and buildings. In 1959 Carlton and United Breweries purchased the Ballarat Brewery, its brewing rights and the land (but not the 114 BBC hotels or the Dana Street offices). The Lydiard Street frontage become the 'front' of the CUB Brewery. CUB ceased brewing at the Ballarat Brewery site in 1989 and closed the plant. Four years later the 'brewery site' was purchased by the Ballarat School of Mines to enlarge its campus area as TAFE was a rapidly expanding areas of education. In 1994 plans were developed for the 'Brewery Complex' with careful regard for needed educational facilities and due concern regarding historical aspects of the site and its buildings. There was close consultation and cooperation with the Ballarat City Council during the planning process. In 1995 most of the Brewery buildings were demolished by some special structures and features are preserved. The old brewery chimney was retained as a permanent reminder of the original industrial site, as were two boilers. The SMB Brewery Complex was completed in 1996 and reflects aspects of the former brewery's appearance. It was opened by Prime Minister John Howard on 28 February 1997. Further details at http://guerin.ballarat.edu.au/curator/buildings/site_listing_brewery-complex.shtml Twenty five colour photographs of the Brewery Building at the University of Ballarat SMB (Ballarat School of Mines) campus. The Brewery Building is built on the site of the former Ballarat Brewery and incorporates the chimney and 'Cowley' boilers from that site. ballarat school of mines, henry richards caselli, henry caselli, ballarat brewing, brewery, beer, cowleys foundry, carlton and united breweries

October 2000 articles include: Safer roads for the Shire Eltham Festival program announced Commercial Place design released 2000-2003 Council Plan Released National Reconciliation Framework Living and Learning Centres More Playgrounds Susan St Pavilion completed Study to plan for BMX/skate track Wattle Glen Township Strategy Community Weed Control Program Count Koala Day Environment Centre proposed for Edendale Farm Open Space Strategy findings Neighbourhood Character Study and Residential Design Guidelines Friends groups Clean Drains – Living Creeks, National Water Week Nillumbik Shire Council Cultural Plan 2000-2005 adopted 2001 Alan Marshall Short Story Award Artists’ Open Studios program Kangaroo Ground Tower Advisory Committee Environment leaders at Eltham North primary Dollars saved by regular road maintenance Regional Road upgrades Rural roads grading program Stormwater Management Plan Locality boundary update council newsletters, nillumbik news, nillumbik shire council

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, steve, alan

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, alan

Background to the two openings of the "Goat Shed": Following a need to clean up some of the old L&L Centre buildings, in 1989 Council decided to enclose the remaining goat shed in a steel truss frame for use as a store room. Claire Fitzpatrick, who had run animal husbandry and goat classes on the site from the 1975 opening of the L&L Centre, was invited by the Committee to officiate at the naming of the new building on 3/12/1989. Following a fire of the stables/workshops on 8/5/1990 (which had to be cleared off the site) Council/Committee decided to use the $15000 insurance money to upgrade/refurbish the 1989 building to replace classrooms lost in the "stables fire". This refurbished Goat Shed was officially opened on 30/5/1991 by Cr. Peter Graham, Shire President. (Gleaned from Committee file, 1987-1992.) Photos show Cr Graham plus Gillian Barclay (Co-ordinator), Liliana Unsworth (Engineering Design Draftsperson) and Bill Oakley (Corporate Development Officer). Colour photographeltham living and learning centre, goat shed, gillian barclay, peter graham, liliana unsworth, bill oakley

Articles in the annual report include: retirement of Graham Lawrence and appointment of Jon Isaacs, death of Dr Sandy Robertson, pilot Traineeship Access Course for school leavers was developed, library involved in organising IFLA Specialist section meeting, introduction of face to face proofreading for talking books, Dr Max Lang donated his personal collection of optometry books, Maths Braille Code revised with input from Betty Smith and RBS staffers, increase of braille produced through microbraille program, Paul Cullen Centre opened on October 28, 1987 with two levels of care via Burgess Hostel and Roselands Nursing Home, closure of Lighthouse Hostel in Burwood and small cottage style hostels in Enfield and Strathfield, introduction of new lines in manufacturing (skirthanger, Miyata bicycle), Variety Club of Australia continue their support for a national children book collection, 3M Australia sponsored upgrade of studios and Talking Book of the Year award, Jillian Hallam won Sports Girl - for all Women in Sport award and Inge King's 'Awakening' won the Bicentennial RBS Sculpture award.1 volume of text and imagesroyal blind society of new south wales, corporation records

A single rollover kerb has just been laid on western side cut into the embankment. At the crest of the hill on right in front of the Ford Laser is a fire hyrdant. This photo was processed at the same time as image EDHS_07261 of roadworks in Sackville Street about 200 m away which has been dated as c.1983 (between Sep 1982 and May 1983). The paling fence on the left has a change of angle just before the crest of the hill then flattens. More recent Google Streetviews show the same fence and shape and in more recent times a new fence but same shape. Google Streetview for Jan 2008 indicates a more recent road widening and new profile kerb and channel. The embankment was further cut away and the footpath that was adjacent to the fence lowered to road level. The fire hydrant that was on the right hand side has been relocated to the left next to the footpath. Significantly more electrical wires are now strung on the telephone poles. In 2017 Bolton Street was again upgraded. The fire hyrdrant was then relocated to another (unknown) location.1983, footpaths and gutters, road construction, road drainage, road sealing, bolton street, eltham, sackville street

After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 4G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s.Base station radio with handsetRC-4B Amalgamated Wireless Australiabushfire, radios, forests commission victoria (fcv)

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Railway Commissioner Harold Clapp and Mrs. Clapp ready to leave Albury on the "Spirit of Progress" in 1938. The Driver is George Lynch Snr. and the Fireman is E. Finley. Sir Harold Winthrop Clapp (7 May 1875 – 21 October 1952) was a transport administrator with the Victorian Railways who over the course of 30 years revolutionised the railways in Victoria. Clapp introduced faster services and more powerful locomotives, supported the farming sector and presented a report on standardising rail gauges which then led to a uniform rail gauge across capital cities. His most well-known project was the upgrade of the Sydney Limited service into the all-steel, all-air-conditioned, non-stop, high-speed express streamliner, Spirit of Progress which was launched on 17 November 1937. Clapp became Chairman of Commissioners of Victorian Railways in 1920 and remained Chairman until his retirement in 1951. Harold W Clapp was appointed a Knight Commander of the Order of the British Empire (KBE) in 1941 in recognition of his contribution to public service.railways wodonga, fred rochow, wodonga railwaymen, s class locomotive

After attending Eton College, Herbert Chermside attended the Royal Military Academy where he graduated at the top of his year and was commissioned in the Royal Engineers in 1870. After several postings and expeditions, including the Arctic in 1873, he was promoted to captain in 1882 and appointed to the British Army's intelligence staff in Egypt and given command of the Egyptian Army's 1st Battalion. He spent four years in Egypt. Promotions and consular appointments followed and eventually he returned to Britain. He was appointed in command of the Curragh Camp in Ireland, 1900. However, he was sent to South Africa to command the 14th brigade and the 3rd division during the Second Boer War. Late 1901 he returned to his position in Ireland and in 1902 he was appointed the first Post-Federation Governor of Queensland, Australia. He announced his retirement in 1904 and returned to Britain. He retired from the Army in 1907. Chermside was awarded the Companion of the Order of the Bath in 1886, Companion of the Order of St Michael and St George in 1880, upgraded to Knight Commander of the Order of St Michael and St George in 1897 and Knight Grand Cross of the Order of St Michael and St George in 1899. Individual image from photographed poster of tobacco and cigarette cards.herbert chermside, royal military academy, commissioned, royal engineers, arctic, egypt, british army intelligence staff, curragh camp, ireland, south africa, second boer war, governor of queensland, companion of the order of the bath, companion of the order of st michael and st george, knight commander of the order of st michael and st george, knight grand cross of the order of st michael and st george

After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. Rapid improvements in technology led to various models of bulky handheld portables with heavy batteries that always seemed to go flat. In fact, batteries were a constant impediment at bushfires. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 4G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s.Portable UHF Radio with leather carrying case and strap. Charging station. Kyodo Model KC-1109 MOYHU Whitfieldbushfire, radios, forests commission victoria (fcv)

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Walker rail motors were a type of diesel railcar operated by the Victorian Railways. After World War 11, the Victorian Railways undertook a major rebuilding program known as Operation Phoenix. One of the first tasks was the upgrading of passenger services on country branch lines. An initial order of twelve 102 HP railcars, six 153 HP railcars with trailers, and twelve 280 HP railcars was placed with Walker Brothers, England. The power units were manufactured in England, but the units were assembled in Victoria. The first rail motors were delivered in 1948, with additions to the fleet running through to 1955. According to a Victoria Railways Memorandum issued on 24 May 1949, regarding the allocation of the new 102 HP Walker Diesel Motor Rail Vehicles, No 10 was to be allocated to the Wodonga to Tallangatta line as soon as it was available. No 10 entered service on 22 November 1949. The passenger rail motors had room for 18 First class and 22 Second class seated passengers. The last passenger service from Wodonga to Tallangatta ran on 30 September 1961 with a 102hp Walker Rail Motor.railways wodonga, fred rochow, walker rail motor vehicles, wodonga to tallangatta rail service

Belgrave railway station is the terminus of the electrified line from Melbourne in Victoria, Australia, serving the eastern Melbourne suburb of Belgrave. Opened as Monbulk on 18 December 1900, it was renamed Belgrave on 21 November 1904. It was upgraded to a Premium station on 2 July 1996. The station was originally on the Upper Ferntree Gully – Gembrook narrow gauge line. It, along with the rest of the line, officially closed on 30 April 1954. However it saw further use between 1955 and early 1958, when trains were operated by the Puffing Billy Preservation Society in co-operation with the Victorian Railways. The station area re-opened on 19 February 1962 when the line as far as Belgrave was converted to broad gauge and used electric traction as part of the suburban network.[1] It has one island platform with two faces. It is serviced by Metro Trains' Belgrave line services The Puffing Billy Railway Belgrave station is located 100 metres north of the station and is accessible via a short footpath. It was required to be located further down the line than the original narrow-gauge station (which was approximately where the current suburban station car park is located). ref: https://en.wikipedia.org/wiki/Belgrave_railway_station photos at http://www.vicrailstations.com/Gembrook/Belgrave/Belgrave.htmlHistoric - Victorian Railways Station sign used at Belgrave StationStation Sign - Belgrave Metal sign - white enamel back ground with black letters Belgravepuffing billy, victorian railways, belgrave station

Set of 6 documents associated with the provision of low floor tram stop platforms along route 96, East Brunswick to St Kilda. .1 - Pamphlet - 20 pages centre stapled, titled "Route 96 Project - Have your say: Stop 133 Fitzroy St and Acland Street Early designs" Includes a feedback form. Dated 2013. .2 - Drop in DL card - for general update on Nicholson St between Kay Street and Fitzroy North and Brunswick Road. March 2019 .3 - 6 fold A3 to DL - "Route 96 is being upgraded so everyone can catch the tram" - shows the program and map for the provision of 9 stops and timeline. The later was not achieved. 2 copies held. .4 - 6 fold to DL, special size sheet - for the redevelopment of stop 125 Port Junction - shows the siding for the Tramcar Restaurant, and stop 124 at the world trade centre. Dated 2013 .5 - 8 fold to DL - special size paper (has been torn into two), for the Acland St options, and Fitzroy St at the junction with the Light Rail line. Again not all work undertaken. Dated 2013. Have logos of PTV, Yarra Trams and Department of Transport.trams, tramways, route 96, tram stops, fitzroy st, acland st, platform stops, nicholson st, brunswick rd, port junction, clarendon st, whiteman st

Three documents relating to the redevelopment of Legacy House that was completed in 2006. In a message from the President published in the Bulletin, Legatee Bill Rogers mentions the official opening of Legacy House by the Governor of Victoria Professor David DeKretser AC on 25th August 2006. Also that two new tenants had been secured, IGA and Starbucks. The refurbishment had been necessary to upgrade the lift, provide better wheelchair access and comply with regulations. The notice also mentions an increased use of Direct Mail and the launch of the Torch Society in April. Second document was a reprint from a Press Release in 1957 when Sir Dallas Brooks officially opened Legacy House after purchase and refurbishment. The refurbishment was the first time Legacy approached the general public for funds as 90,000 pounds had been required. It also tells of the history of how Legacy acquired the David H Dureau Memorial Building through funds donated by a donor in 1944, a different property was purchased then sold and funds used to buy 293 Swanston St in 1956. The third document was the address that Bill Rogers spoke at the official opening on 25th August 2006. It mentions Bert Dennis, a former Junior Legatee, was donating the proceeds from an auction of a Dennis Family Homes project the following day. Document was from a folder of documents donated to the archive by Legatee Bill Rogers that related to his time as President (March 2006 - March 2008).A record of the history of Legacy House and its refurbishment over time.Print out x 4 pages about Legacy House, its redevelopment, reopening and history.dureau house, properties

After the 1939 bushfires, the Forests Commission Victoria invested heavily in a radically new communications network. After suffering some inevitable delays due to the war, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. The advent of solid-state electronics in the 1960s replaced the more delicate valve sets which enabled greater use of vehicle mounted radios. The Commission continued to research, develop and build new radios at its many workshops around Victoria. The network was supported by a large team of skilled radio technicians. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 5G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s. Radio with handsetSTC - Standard Telephones and Cables Ltdbushfire, radios, forests commission victoria (fcv)

The double bevel gauge is used as a drawing tool, to measure, set angles and transfer angles. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.This double bevel gauge has three lengths of flat brass that swivel at the joints. The long piece has curved ends and indented arcs, one on each side, along the length. The short pieces have diagonal ends. The centre length has a hole through the middle. The short pieces have a screw with its head above the flat brass. The tool has an inscription. It once belonged to shipwright Laurie Dinks.Bevel marked "L DILKS" "G. M."flagstaff hill, warrnambool, great ocean road, shipwreck coast, maritime museum, maritime village, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, ship maintenance, cooper, tool, marine technology, bevel, drawing tool, measuring tool, laurie dilks, l dilks, port and harbours melbourne

A broad axe is used for the initial cutting and shaping of a log to prepare it for the piece to be made. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Broad axe; a wooden handle with a round metal wedge-shaped head, reinforced with a metal plate on at the back of the handle. There is a hole in the handle about halfway along its length. It once belonged to shipwright Laurie Dinks.flagstaff hill, maritime museum, maritime village, warrnambool, shipwreck coast, great ocean road, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, caulking, ship maintenance, cooper, shipwright’s tools, shipwrights’ tools, tools, maritime trade, broad axe, caulking iron, laurie dilks, l dilks, port and harbours melbourne

One end of the peg hammer’s head had a wedge-shaped tapered end, which was referred to as the peg poll and was used for hammering in pegs or bolts. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Pin hammer; Wooden handle and steel head, thick heavy rounded end on one side, tapered wedge shape end on the other side. It once belonged to shipwright Laurie Dinks.flagstaff hill, warrnambool, great ocean road, shipwreck coast, maritime museum, maritime village, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, ship maintenance, cooper, tool, marine technology, hammer, shipwright's hammer, pin hammer, laurie dilks, l dilks, port and harbours melbourne