In this picture The Royal Train is passing through a railway crossing along the Wharf Spur line. The train has been shortened comprising steam locomotive J-521 and tender to which is attached the State car. The State car is in the design of the Spirit of Progress. George Coop advised that the occasion is the visit of the Governor of Victoria, Sir Rohan Delacombe to Echuca in 1963. Delacombe had replaced Sir Dallas Brooks in May 1963 who had departed for England on the liner Iberia,11 April 1963 (1963 'SIR DALLAS ON WAY TO U.K.', The Canberra Times (ACT : 1926 - 1995), 9 April, p. 9. , viewed 27 Jan 2020, http://nla.gov.au/nla.news-article104249252) George believes the Governor was doing a considerable formal train ride around the State and Echuca was on the schedule. The ‘platform’ was a special creation for such purposes, located on the wharf spur line that ran behind the Echuca Civic Centre. The large notice board commemorates the Queen’s visit on March 5th, 1954 for which the platform was initially built. From time to time it would get spruced up with pot plants, fresh paint and repaired hand rails for formal functions. George attended the Civic Reception held for the Governor. A picture of His Excellency Sir Rohan Delacombe, Governor of Victoria, and Lady Delacombe about to entrain at Spencer Street for a visit to western Victoria is available on page 4 of VICTORIAN RAILWAYS REPORT OF THE VICTORIAN RAILWAYS COMMISSIONERS FOR THE YEAR ENDED 30th JUNE, 1963. (http://www.victorianrailways.net/vr%20history/annual_reports/vrar1963.pdf) More information about the Victorian Railways Royal Train https://en.wikipedia.org/wiki/Victorian_Railways_Royal_Train State Car No. 5 https://www.pjv101.net/cd/pages/c160v06.htm Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca, george coop collection, governor of victoria, j-521, railway crossing, royal train, sir rohan delacombe, state car no. 5, victorian railways, wharf spur line

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. In 1978, Ballarat College of Advanced Education made a submission to the Victoria Institute of Colleges for consideration which would also need the approval of the Federal Government Tertiary Education Committee. This was for the development of an Occupational Hazard Management Course. This approval meant the VIOSH course could begin in 1979. At times since that date they had to apply for re-accreditation of the course. The Occupational Hazard Management Course Committee was responsible for this. This meeting notice was sent stating the only matter on the agenda was the re-accreditation proposal. Dennis Else - Chairman, Max Brook, G Fernandez, R Kemp, J Harvey, B Lees, Tom Norwood, and Eric Wigglesworth attended the meeting held on Monday 23 September 1985. Apologies were: G Bradley, Keith Brown, R Gillis, P Kelly, R Lang, J Lowing, R Maud, L Roberts, P Swan and Derek Viner. A4 page - typed on both sidesviosh, victorian institute of occupational safety and health, re-accreditation, occupational hazard management, dennis else, max brook, g fernandez, r kemp, j harvey, b lees, tom norwood, eric wigglesworth, g bradley, keith brown, derek viner, p kelly, r lang

This nameplate is a reproduction of the Ross & Duncan nameplate and was displayed on the Rowitta vessel activation at Flagstaff Hill. Ross & Duncan of Glasgow manufactured marine engines and boilers from the time it was established in 1860 and growing to employ 450-500 workers by 1911. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. It was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. It was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, it was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so it was restored back to its original configuration. The vessel represented the importance of coastal traders to transport, trade and communication in Australia times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. The vessel had given over 100 years of service and pleasure to those who knew her. The nameplate was reproduced to represent the Glasow marine engineers and boilermakers, Ross & Duncan, that were the makers of the engine for the exhibition steam ferry Rowitta. The Tasmanian-built vessel had a long career in Tasmania and Victoria. The nameplate is significant for its connection with the Rowitta, representing the importance of coastal traders to transport, trade and communication in Australia in conjunction with the new rail and motor vehicles. The nameplate is a record of an exhibit at Flagstaff Hill Maritime Village from its early beginnings. Maker's brass nameplate; brass, with embossed text and a hole in each corner. The background is painted red. There are five rows of text; the top row is arranged in an arc. On the bottom row is a number. The nameplate is a replica that was once displayed on the Rowitta vessel at Flagstaff Hill. The reproduction nameplate is for the company Ross & Duncan of Glasgow."ROSS & DUNCAN / ENGINEERS / WHITEFIELD WORKS GLASGOW / NO. 779" flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, steamer, steam ferry, ross & duncan, marine engineers, marine boilers, glasgow engineers, whitefield works, reproduction, scotland, steamer engine, rowitta, sorrento, ss rowitta, navigation, marine technology, steam power, hobart, tasmania, devonport, tasmanian-built, ferry, 1909, early 20th century vessel, passenger vessel, tamar trading company, tamar river, launceston, george town, tarkarri, speculant, peter mcgennan, p j mcgennan & co. port phillip ferries pty ltd, melbourne, coastal trader, timber steamer, huon, karri, freighter, supply ship, charter ferry, floating restaurant, prawn boat, lakes entrance

View looking south along Main Road, Eltham from near present day Luck Street. On the immediate right is a fence with the words “Hot Water” painted on it followed by William J Capewell’s butcher shop, then the slaughter yard and saleyards with the entrance access to the railway station. Contained within the saleyards facing the street, a small shelter with the name H.H. Clark upon it. Horace Harold Clark was the son of Eltham State School’s first Head Teacher, David George Clark. As well as being a farmer, he was an Estate Agent and conducted auction sales, presumably from this shelter. The large weatherboard building on the corner (opposite present-day Arthur Street) with signs for Summer Drinks and Hot Water painted on the side is Luther and Ada Haley’s General Store and Bakery, built 1902. This was the first building in what is now Eltham’s present shopping town centre. Haley previously ran the General Store and Bakery on the corner of Main Road and York Street until his lease expired and the premises were bought by Mrs Sarah Burgoyne in 1902. The store later was known as Staff's Store. In the distance approximately mid-way between the Butcher shop and the Bakery are the tops of what appears to be two cypress trees, which could well be the trees in front of the Shillinglaw Cottage facing Main Road. On the eastern (left) side of Main Street is Haley’s Paddock, which was used on occasions for community picnics. Capable of holding 10,000 people, with ample shade and hilly surroundings it was an ideal place for any community gathering such as the State Schools’ Picnic in 1904. Picture dated as c.1910 based on similar picture published in the Weekly Times, Feb. 1912. Kerb and channelling added 1923. Cross Ref: 610 (looking north), 611 (later stage), 613. Same as 705 (though in better condition)This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as the 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital image 4 x 5 inch B&W Neg 120 format B&W negative (spare)shire of eltham pioneers photograph collection, eltham, main road, butcher, eltham railway station, railway station, w.j. capewell, baker, eltham town centre, general store, luther haley, reynolds prior collection, shops, haley's paddock, hot water, m.m. clark, sign, summer drinks, eltham sale yards, eltham slaughter yard, staffs general store

This Bosun's char was part of the equipment on the vessel 'Reginald M. It is typical of items included on board a vessel in the late 19th and early 20th century. The nautical word 'bosun' is an abbreviation of the word 'boatswain' who is the person responsible for the repair and maintenance of the vessel. It could be used when rigging the sails and for rescue at sea, along with a thick rope anchored on shore or a rope between ships. It could also be used to move passengers to and from a ship as well as cargo on, to and from the vessel. A bosun's chair is a simple piece of equipment made from a short plank of wood and a sturdy piece of rope. It looks a little like a child's swing but usually has a pulley system that allows the user to adjust the length of the hanging piece of rope, and in so-doing adjusts the height above the floor or ground or sea. In modern times a harness would also be worn by the bosun’s chair user for safety reasons. Bosun's chairs are also used by window cleaners, construction workers and painters. The bosun’s chair is sometimes just a short plank, or even a canvas sling. The REGINALD M - The vessel “Reginald M” was a two-masted coastal ketch, owned and built by Mr. Jack (John) Murch of Birkenhead, Port of Adelaide, South Australia. Its construction took approximately 6 months and it was launched at Largs Bay in 1922. The vessel had many owners and adventures over the years until it was purchased by Flagstaff Hill Maritime Museum & Village in 1975 from the Melbourne Ferry Company at auction. It was then used as an active display until 2016. Visitors could go aboard, turn the ship's wheel, go below deck and get the feel of the captain's quarters, sailors' quarters and the storage space available. The Reginald M was a popular exhibit for young and old, until 2016.This bosun's chair is significant for its connection to the maritime history. It has been used for rigging, painting, maintenance and importantly for life saving and safety. The bonus's chair is also significant because of its connection to the history of the vessel REGINALD M, the coastal trading ketch from South Australia built in 1922 and in existence until 2016. Its flat bottom, single chine shape illustrates a very simple but robust method of construction, compared to other round bilged examples of trading vessels. The Reginald M is listed on the Australian Register of Historic Vessels (ARHV Number: HV000562.)Bosun's chair; seat is a rectangular plank of wood with a hole drilled in each corner and three reinforcing wood lengths attached below the plank. The ends of two looped thick ropes have been threaded through the holes in the plank, crossed over then spliced together. The loops of rope above the plank have been tied with light rope. A roughly made wire hook is attached at the base of one length of rope. Top surface reveals indents where the bottom wooden pieces are joined to the top and some of the metal fixtures can be seen along the edge. There are remnants of white paint on the top.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, bosun's chair, bosuns chair, boatswains chair, rigging, maritime equipment, bosun's seat, life saving, marine technology, ship rigging

Cast iron stoves burn solid fuel such as wood or coal, and are used for cooking and warmth. The stoves have a firebox with a grate where the fuel is burned. The hot air flows through flues and baffles that heat the stove top and the oven. Before cast iron stoves were invented, cooking and heating were carried out in outdoor open fires, and later, in fireplaces inside the home. In 1642 the first cast iron stove was manufactured in Lynn, Massachusetts, where molten cast iron was poured into a sand mould to make rectangular plates that were then joined together to make a box. Benjamin Franklin invented the more efficient Pennsylvania stove in 1744, and this efficient design is still used today. After the mid-19th century cast iron stoves were produced with burners in different positions, giving varied temperatures, so a wide variety of foods could be cooked at the same time at the most suitable heat, from slow cooking to baking scones. In contemporary times people the new wood-burning stoves had to meet the anti-pollution standards now in place to protect our environment. By the 1920s gas cookers were being introduced for domestic use, and by the 1930s electric home cookers were being offered to householders. PLANET STOVES In August 1925 the firm Cox and Rizzetti, Stove Works, and also Sydney Road, South Melbourne, advertised in the Brunswick and Coburg Leader of November 11, 1925 as "formerly with Harnwell and Sons" and as "specialists in solid cast iron Planet stoves ... which merit an inspection from builders and householders". The firm continued in business and was mentioned as sponsors in the King Island News in 1971. Harnwell and Sons was listed in the Victorian Government Gazette of 1894. It is curious that the firm was mentioned in an article in the Sunrasia Daily of June 14, 1934 titled 'Planet Stoves' as a manufacturer of Planet Stoves. This Planet No 3 stove is an uncommon example of cooking equipment used in kitchens in the early 20th century, as the firebox is above the oven rather than beside it. The cast iron combustion stove is significant as part of the evolution of domestic cooking. Previously cooking was mostly carried out in outdoors in open fires, and later in fireplaces indoors. Cast iron stoves are still used today and have additional features such as thermostats to monitor and maintain temperature, water heating pipes connected, and environmentally approved anti-pollution fittings. Stove; a compact, blackened cast iron combustion cooker, installed within a fireplace and enclosed by bricks on both sides. The upright rectangular stove has a flat top with three round, removable cook plates and a flue connected at the back. The front has three doors with round knob handles; a swing-down firebox door above a sliding ashtray, and two side-hinged oven doors above a sliding opening. Inside on the side walls are two pairs of runners. Behind the pair of doors is an oven with two pairs of rails and two removable metal shelves. The stove has cast inscriptions on the chimney flue and on the front of the right hand side stove door. The model of the stove is The Planet No 3, made in Melbourne.Chimney flue, "[within rectangle] THE / PLANET" Stove door, "(within oval) PLANET / No 3"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, stove, cast iron stove, combustion stove, wood-burning stove, wood stove, wood oven, solid fuel stove, cooker, the planet, planet, planet no. 3, kitchen equipment, baking, domestic cooking, cooking equipment, food preparation, planet stove, planet cooker, cooking range, slow combustion stove, antique, range cooker, cox and rizzetti, harnwell and sons, melbourne manufacturer

This remote-controlled ship model was made by the blacksmith at Flagstaff Hill Maritime Village in the likeness of the Village's display passenger ferry, the S.S. Rowitta. SS ROWITTA: - The 1909 steam ferry, SS Rowitta, was installed as an exhibit at Flagstaff Hill in 1975 and was enjoyed by many visitors for 40 years. Rowitta was a timber steam ferry built in Hobart in 1909 using planks of Huon and Karri wood. She was a favourite of sightseeing passengers along Tasmania’s Tamar and Derwent rivers for 30 years. Rowitta was also known as Tarkarri and Sorrento and had worked as a coastal trading vessel between Devonport and Melbourne, and Melbourne Queenscliff and Sorrento. In 1974 Rowitta was purchased by Flagstaff Hilt to convert into a representation of the Speculant, a historic and locally significant sailing ship listed on the Victorian Heritage Database. (The Speculant was built in Scotland in 1895 and traded timber between the United Kingdom and Russia. Warrnambool’s P J McGennan & Co. then bought the vessel to trade pine timber from New Zealand to Victorian ports and cargo to Melbourne. She was the largest ship registered with Warrnambool as her home port, playing a key role in the early 1900s in the Port of Warrnambool. In 1911, on her way to Melbourne, she was wrecked near Cape Otway. None of the nine crew lost their lives.) The promised funds for converting Rowitta into the Speculant were no longer available, so she was restored back to her original configuration. She represented the importance of coastal traders to transport, trade and communication in Australian times before rail and motor vehicles. Sadly, in 2015 the time had come to demolish the Rowitta due to her excessive deterioration and the high cost of ongoing repairs. She had given over 100 years of service and pleasure to those who knew her. The remote-controlled model of the S.S. Rowitta is significant for its association with the Tasmanian early to mid-1900s passenger ferry, the wooden screw steamer Rowitta. It is is connected to the history of the Rowitta, that was a large exhibit on display at Flagstaff Hill Maritime Village from the museum’s early beginnings until the vessel’s end of life 40 years later. The display was used as an aid to maritime education. The Rowitta represents the importance of coastal traders to transport, trade and communication along the coast of Victoria, between states, and in Australia before rail and motor vehicles. The vessel was an example of a ferry built in the early 20th century that served many different roles over its lifetime of over 100 years. Model of the wooden steam ferry "S.S. Rowitta". This is a radio-controlled model built by the Flagstaff Hill blacksmith.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model, remote controlled steam ship model, s.s. rowitta, tarkarri, speculant, purdon & featherstone of hobart, passenger ferry 1909, tasmanian passenger ferry, vessel, charles street wharf launceston, sorrento, remote control boat, rowitta model, remote-controlled model

This standard design life jacket was made by sailmakers Harry West Pty Ltd at Balmain, Sydney, New South Wales from 1930s to 1950s. Harry West - Harry was a chandler, sailmaker and rigger. He made and sold all kinds of canvas and rope goods including sails, awnings and covers. In 1925 he was advertising life buoys but by 1933 he was advertising life jackets. He and his wife Margery had six children. His business was still operating in 1954, when an article on the craft of sailmaking appeared in the Sydney Morning Herald. His sailmaker's loft was located, traditionally, close to Sydney's harbour. Life Jackets - Life jackets were part of the equipment carried by the Life Saving Rescue Crew of South Western Victoria, including Warrnambool, from around 1858 until the 1950s. The purpose of a life jacket is to keep the wearer afloat until he or she is rescued from the water. Life jackets were first invented in 1854 by Captain Ward of the Royal National Lifeboat Institution in Britain. The early life jackets were filled with cork, which is very buoyant. However, many times he cork caused the jacket to rise up quickly with a force that caused unconsciousness, sometimes turning the person face down in the water , causing them to drown. After the tragic loss of the ship RMS Titanic in 1912 and the lost lives of those onboard, a woman named Orpheus Newman designed the Salvus life jacket (Salvus means safe), which was filled with kapok instead of cork. Kapok comes from seed pods of the Ceiba Pentandra tree and is waterproof as well as buoyant. These Salvus jackets were used by the Royal Navy until new synthetic materials became available around the time of World War II.This life jacket is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.Life jacket, canvas covered, with two kapok padded compartments joined by shoulder straps and waist ties. Designed to slip over the head and tie at the waist. Inscriptions on pouches, some stencilled, some hand written, and inspection text on shoulder strap. Made by Harry West Pty Ltd., Sailmakers, Balmain, Sydney.Stencilled on pockets: “- - - NDARD / LIFE JACKET” [STANDARD LIFE JACKET], “HARRY WEST PTY LTD / SAILMAKERS / BALMAIN, SYDNEY” Stamped on shoulder strap: "XM3271RC" Hand painted on pocket: “DAVIES”flagstaff hill maritime museum and village, flagstaff hill, maritime museum, maritime village, warrnambool, lady bay, warrnambool harbour, captain ward, royal national lifeboat instution, kapok, life jacket, orpheus newman, salvus jacket, life saving, rescue, rescue crew, l.s.r.c., life saving equipment, marine technology, lifeboat, shipwreck victim, vintage, harry west, balmain, sydney, davies, standard life jacket, survivor, shipwreck, sailmakers, harry west pty ltd

In 1901 Cameron was captain of the Rokewood Rifle Club. John Cameron was a Rokewood blacksmith in 1902. John (Jack) Richard Watson was the son of Thomas Watson (10/11/1838 - 27/04/1920) and Emma Eliza Jane Phillips (25/05/1844 - 12/10/1925) and was born at Yendon on 16/12/1876 and died 11/10/1973 aged 96 at the Wimmera Base Hospital in Horsham while residing in Murtoa. Still a teenager Thomas reached Melbourne in the 1850's and found work helping to build the Spencer Street Bridge over the Yarra Yarra, as it was known then, before making his way to the Ballarat Goldfields. After being tricked out of a claim he sought work with the Victorian Railways, and later acquired a farm at Yendon. Emma Phillips was born in Geelong and had moved with her mother to Ballarat. Emma was a member of the Ballarat Philharmonic Orchestra and sang in the choir of St Pauls Church in East Ballarat, where they were married. Jack worked in the gold mining industry - firstly as a braceman at the New Kohinoor Mine at Sebastapol and then to a mine at Rokewood, both times following his older brother Frederick George. He later worked in 15 different mines before changing occupations. He was employed as an engine driver for the Murtoa Waterworks Trust at the Murtoa Power Station when he lost his lower left arm when it was caught in an engine belt in 1929. Jack married Edith Emma Yung (01/07/1887 - 05/10/1988 ) who was born at Allendale and died aged 101 at Wendouree after livivng most of her married life at Murtoa. They had five children all born in Murtoa: Richard Henry (Harry); Edith 'Alice'; Grace; Ernest Alfred (Alf) and Jonn Grenville (Gren). They were married at Yendon. Sepia photo of eighteen men and one girl. Eight are in uniform, and two are identified as Boer War soldiers. They all stand in front of Cameron Coach Builders showroom and workshop. The person fifth from the left is J.R. Watson.Front top Rifle Club (Murtoa - crossed out) Rokewod 1898; Lower LHS South Africa Boer War; C - Rokewood Rifle Club; Loer RHS J.R.Watson. Sign on Building: Agricultural & Mining & Smith above Cameron Coach Builder. Verso: Madeley Photo Corindhap plus a signature.corindhap, rokewood, rokewood rifle club, j.r. watson, cameron coach builder, john cameron, emma eliza jane phillips, thomas watson, john richard watson, edith emma watson

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains 10 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

Photographs from Ringwood Technical School Reunion. Note: If anyone in these photographs does not want their image to be visible on the Victorian Collections public website, please email [email protected] with a request to remove that photo. This Reunion was held at York on Lilydale, Lilydale, Victoria on March 27 2010, to commemorate the 50th anniversary of the school commencing in February 1960 in the newly-completed building as a co-educational campus. Prior to that it had operated on two separate, temporary campuses until the new school was ready: - at Ferntree Gully Technical School in 1958 for 100 Form 1 boys, then the following year in spare rooms at Lilydale State School for 200 Form 1 and 2 boys - at Box Hill Girls' Technical School in 1959 for 100 Form 1 girls The Reunion was organised by Joan Pickford, helped by several other past students. Joan worked exceptionally hard to organise the reunion and the materials displayed on the night. The beautiful RTS banner that we all walked past in the school's main corridor all those years ago, was there in all its glory - the only RTS relic that wasn't showing its age on the night. It was a great event and well-attended. The noise of people chatting and swapping stories was deafening. Some of the 1958-59 original students, and teachers from the1960s onwards were there. People brought along their photos and memorabilia. Some wore their ties and badges which still fitted after all those years. One former prefect wore his old blazer, which must have shrunk in the wardrobe but reminded many of us of those carefree times at school.. Best of all was the re-kindling of memories, and renewing and consolidation of friendships started at the school all those years ago. (This background provided by Liz Seaton, September 2022) This record contains the last 7 of the 57 photographs taken at the RTS Reunion 27 March 2010. Records 21009-1 to -6 contain the full collection. The photographs were copied from a CD provided by Photographer Belinda Dinami. rts, ringwood tech

TROVE : The Age (Melbourne, Vic. : 1854 - 1954) Thursday 22 August 1918 p 6 Article 'Doctors and Lodges. Malvern Medical Association. The friendly societies of Malvern have formed a medical association in connection with the Malvern and District U.F.S. Dispensary. This has been registered as the Malvern and District U.F.S. Medical Association and Dispensary. Practically all the societies have joined it. The committee has appointed as medical officer Dr. J Weir, who is now carrying on the work of the institution. Another doctor is to be appointed shortly to assist him. The committee lately purchased a property in Valetta-street, formerly used by the Church of Christ. Structural alterations have been made, and the business will be transferred from High-street to the new building early in September'. TROVE : The Prahran Telegraph (Vic. : 1889 - 1930) Friday 23 January 1925 p 6 Article 'Malvern Dispensary. ANNUAL REPORT AND BALANCE SHEET. The 16th report and balance sheet for the year ending December 31st last of the Malvern and District U.F.S. Medical Association and Dispensary signed by the president (Mr.Chas. A. W. Smith) has been issued. It is the first annual report since the erection of the new hall and dispensary in Valetta street, and discloses a satisfactory state of affairs. Mr. Smith, who is now a past president of the Dispensary, has been commended on. all sides for the active interest He at all times took in the work of the dispensary, and he has every reason to feel pleased and gratified that the erection of the new building was put in hand and completed during his tenure of office. The enterprise is a credit to the district, and shows that, those associated with friendly societies work in Malvern are imbued with a true progressive spirit. The dispensary is assured of a successful and useful future.........................................'. TROVE : Digitised newspaper articles.- The Dispensary Hall in Valetta Street, Malvern was used as a meeting place and dance hall after 1925.Hexagonal clear amber glass bottle, 1/4 full of yellow / brown liquid with cork stopper secured by string. White paper label with red printed text and hand writing. Bottle has 3 plain sides, 2 sides with 'x' stipple pattern either side of a panel with embossed text.Embossed on side of bottle 'NOT TO BE TAKEN', '8'. Embossed on base of bottle '8', followed by an AGM monogram, over one indistinct character and '422M'. On the white paper label printed in red 'POISON' NOT TO BE TAKEN', followed by hand written script in blue ink 'Use on pad as directed. Mr. Williams' , then printed in red, double red lines followed by MALVERN & DISTRICT U.F.S., M.A. & DISPENSARY, VALETTA STREET, MALVERN.poison, friendly societies, amber glass, pharmacist, dispensary, topical medications.

Brian was born in Melbourne in 1949. Early life was spent in the stimulating bush environment in Montrose. Ramon Horsefield saw a spark and Brian began to paint in oils at the age of thirteen. He contunued tuition with Graham Moore, in class and at night classes. An Art Diploma at Swinburne was not completed. This did not crush his creative spirit and he resumed tuition with Graham Moore. Within a few years he was winning prizes. Many and varied jobs allowed him to survive whilst aspiring to become a full time painter and bring up his growing family. In 1977 Brian resigned from his last employment as a picture framer. He leased a shop in Main St, Mornington and set up classes. Brian taught painting and had his own studio behind the school. Later he was to move and build his "bushland gothic" home in North Warrandyte. Here he developed his reputation as a painter. Brian had his first solo exhibition in 1979. Many more were to follow. He has won many prizes, was a finalist in the 1992 Moran Portrait prize. The Alice Bale Scholarship which he won, entailed a year traveling and studying in Europe. Brian returned home in 1996. Sharing his skills with many students over the years, he taught privately and at various art societies. His oils, pastels and charcoals capture the light of landscape, portrails and nudes. In 2012 it will be thirty-five years since Brian has had a "real job". At times this has been really difficult. He is now semi retired after suffering from Rheumatoid Arthritis for a decade. Now he paints what he loves to. His portraits capture the very essence of the sitter. In 2009 he remarried and moved back into the bushland of North Warrandyte. 'Duet' by Brian E. Armstrong was donated by the Artist to the Eltham Copper Butterfly Appeal Auction.Oil on canvas painting depicting a 'Duet' scene with two children. One is shown playing the flute whilst the other is playing the piano. The painting is fashioned in sombre colours and muted tones, with alternating tones of violet prominent.Signed- Brian E. Armstrong '87 On label - artist's name: Brian E. Armstrong Address: 844.2925 Title of Painting: Duet Medium: Oil on canvas On Frame: 82 enclosed in circle. 31 1/2. C Enclosed in circlebrian e. armstrong

National Wool Museum exhibition in form of a series of portraits and a slideshow showcasing the women of Australia’s wool industry. Exhibition was launched on International Women’s Day 2019, featuring images by photographer ­Nicole Marie. Women In Wool The Australian wool industry would not be what it is today without the significant contribution of women. Often their role has been forgotten or underrepresented. Since colonial times, women have left their mark on the industry, such names as Eliza Forlonge, Elizabeth Macarthur and Anne Drysdale are examples of pioneering Australian women of wool. Traditionally woolsheds were claimed as the domain of men. In the past men would utter the phrase “ducks on the pond” as a cryptic warning to other male shearers that there were women in the sheds and they should watch their language and clean themselves up. But this segregation has changed. In recent years the role of women has increased dramatically across all aspects of the wool industry, but most significantly in woolsheds. Over the last decade the number of women in shearing sheds has almost doubled and it is set to increase further in the coming years. Today, in many sheds across Australia, sometimes women outnumber men when it comes around to shearing time. Women are active and important contributors to the prosperity of the industry. The portraits on show here are a celebration of the significant role of women in the industry. They are a diverse selection, including both young female shearers and experienced workers, ranging in age from 19 to 96. Many of the up-and-coming shearers started as rouseabouts and have stepped up to becoming shearers - one sitter for the project had just returned to the sheds after having a child only three-months before. Also on show are women who devoted decades of their lives to the industry and are only now becoming recognised for their vital role in Australian wool. Foreward by National Wool Museum Senior Curator - Dr. Luke Keoghvirtual imageswool, women in wool, nicole marie

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.Colour photograph of figureheads at the Cutty Sark exhibition.cutty sark,, exhibition, wool, australia, china, sailing, woodget, moodie, london,, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade, figureheads

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade, figureheads

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade, figureheafs

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade

The Long John Silver Collection of Figureheads is displayed alongside the Cutty Sark. It is the largest collection of Merchant Navy figureheads in the world. It was given to Cutty Sark in 1953 by Sydney Cumbers, also known as Captain Long John Silver because of his eye patch. These figure heads come from vessels mostly dating from the 19th century and the collection, like Cutty Sark herself, is dedicated as a memorial to the men of the Merchant Navy. The Cutty Sark was launched on 22 November 1869. She was named by the wife of George Moodie, the ship's first master who had also supervised her construction. Cutty Sark left the Clyde on 13 January 1870. A month and two days later, she set sail from London for China. Cutty sark was designed and built by Scott & Linton of Dumbarton for 16,150 pounds. But much of the money was to be paid by Willis when the ship was launched. Just before they finished her, Scott & Linton ran out of money and went bankrupt. She was completed by William Denny & Brothers. The Cutty Sark was the first ship to reach London with a tea cargo in 1877. But she was one of only nine sailing ships that returned that year - in 1870 there had been 59. Steamships were now dominating the tea trade. In 1883 the Cutty Sark joined the booming trade in transporting Australian wool. Every year until 1895 she set out in the summer for Australia, to load a cargo of wool bales and return to England in time for the wool sales ini the first three months of the new year. Cutty Sark soon established herself as the fastest of the wool clippers. Under her last master, Richard Woodget she set record times of 70 days or less for the voyage which no other sailing ships could match.cutty sark, exhibition, wool, australia, china, sailing, woodget, moodie, london, willis, dumbarton, scott & linton, william denny, tea, cargo, immigration, trade

THE CONSTITUTION OF MUNICIPALITIES GENERALLY. DIVISION 1. INCORPORATION AND GOVERNMENT OF MUNICIPALITIES AND BOUNDARIES OF DISTRICTS. 8. (1) The inhabitants of every shire borough town and city inhabitants of for the time being subject to the provisions of this Act shall, under corporation. the name of the president councillors and ratepayers of such shire N°-5203 «• '• the mayor councillors and burgesses of such borough the mayor councillors and burgesses of such town or the mayor councillors and citizens of such city as the case may be, be a body corporate with perpetual succession and a common seal with power to break alter and change the same from time to time with the approval of the Governor in Council and shall by such name be capable in law of suing and being sued, of purchasing holding and alienating land, and of doing and suffering subject to the provisions of this Act all such other acts and things as bodies corporate may by law do and suffer. (2) The corporation of ******** Shire Common Seal 54. The common seal of the municipality shall be kept in a box having two locks, of one of which locks the chairman of the municipality shall have a key and of the other of which locks the key shall be kept by the municipal clerk; and the corporate seal shall not be affixed to any document unless the chairman of the municipality and one other member of the council or in the absence of such chairman unless two councillors be present. 91. The Council’s Common Seal (1) The Chief Executive Officer must ensure the security of the Council's common seal at all times. (2) The Council's common seal may only be used on the authority of the Council given either generally or specifically and every document to which the seal is affixed must be signed by the Chief Executive Officer or a senior officer authorised by him or her. (3) Any person who uses the Council's common seal without authority is guilty of an offence. (4) Any person who uses any replica of the council’s seal without authority is guilty of an offence. The Numurkah Shire was amalgamated into the Moira Shire and the seal now redundant. This is the only Numurkah Shire Common Seal in existence.local government, common seal, numurkah

National Wool Museum exhibition in form of a series of portraits and a slideshow showcasing the women of Australia’s wool industry. Exhibition was launched on International Women’s Day 2019, featuring images by photographer ­Nicole Marie. Women In Wool The Australian wool industry would not be what it is today without the significant contribution of women. Often their role has been forgotten or underrepresented. Since colonial times, women have left their mark on the industry, such names as Eliza Forlonge, Elizabeth Macarthur and Anne Drysdale are examples of pioneering Australian women of wool. Traditionally woolsheds were claimed as the domain of men. In the past men would utter the phrase “ducks on the pond” as a cryptic warning to other male shearers that there were women in the sheds and they should watch their language and clean themselves up. But this segregation has changed. In recent years the role of women has increased dramatically across all aspects of the wool industry, but most significantly in woolsheds. Over the last decade the number of women in shearing sheds has almost doubled and it is set to increase further in the coming years. Today, in many sheds across Australia, sometimes women outnumber men when it comes around to shearing time. Women are active and important contributors to the prosperity of the industry. The portraits on show here are a celebration of the significant role of women in the industry. They are a diverse selection, including both young female shearers and experienced workers, ranging in age from 19 to 96. Many of the up-and-coming shearers started as rouseabouts and have stepped up to becoming shearers - one sitter for the project had just returned to the sheds after having a child only three-months before. Also on show are women who devoted decades of their lives to the industry and are only now becoming recognised for their vital role in Australian wool. Foreward by National Wool Museum Senior Curator - Dr. Luke Keoghvirtual imageswool, women in wool, nicole marie

National Wool Museum exhibition in form of a series of portraits and a slideshow showcasing the women of Australia’s wool industry. Exhibition was launched on International Women’s Day 2019, featuring images by photographer ­Nicole Marie. Women In Wool The Australian wool industry would not be what it is today without the significant contribution of women. Often their role has been forgotten or underrepresented. Since colonial times, women have left their mark on the industry, such names as Eliza Forlonge, Elizabeth Macarthur and Anne Drysdale are examples of pioneering Australian women of wool. Traditionally woolsheds were claimed as the domain of men. In the past men would utter the phrase “ducks on the pond” as a cryptic warning to other male shearers that there were women in the sheds and they should watch their language and clean themselves up. But this segregation has changed. In recent years the role of women has increased dramatically across all aspects of the wool industry, but most significantly in woolsheds. Over the last decade the number of women in shearing sheds has almost doubled and it is set to increase further in the coming years. Today, in many sheds across Australia, sometimes women outnumber men when it comes around to shearing time. Women are active and important contributors to the prosperity of the industry. The portraits on show here are a celebration of the significant role of women in the industry. They are a diverse selection, including both young female shearers and experienced workers, ranging in age from 19 to 96. Many of the up-and-coming shearers started as rouseabouts and have stepped up to becoming shearers - one sitter for the project had just returned to the sheds after having a child only three-months before. Also on show are women who devoted decades of their lives to the industry and are only now becoming recognised for their vital role in Australian wool. Foreward by National Wool Museum Senior Curator - Dr. Luke Keoghvirtual imageswool, women in wool, nicole marie