Photographed outside the Wendouree Parade depot, late 1887, with 16 workmen standing or lying around the tramcar. Builders Photo. Tram is lettered "BALLAARAT TRAMWAY CO LIMITED". A sign on the advertising board says "Duncan & Fraser, Builders, Ballaarat". The men around the tram are dressed in trade clothes, with aprons, including carpenters, painters and blacksmiths. For image history etc see notes. See also Reg Items 1654 and 3042 for different prints of the same photo. Yields information about the construction, final assembly, of the original horse tram at the Ballarat depot 1887, shows the workmen who were involved.B&W photo (copy print) of Ballarat Horse Tram No. 1. Multiple copies held.765.3 - In the top left-hand corner "19", "No. 1 i n 1887", a red border sticker of printing instructions. Centrally on photo "(1) Ballarat Tramways (horse) Car No. 1 after assembly at the Ballarat depot. 1887". In the bottom right-hand corner a "William F Scott" address label. 765.4 - see image i4 for the rear of Wal Jack's photo notes and i8.trams, tramways, ballaarat tramway company, horse trams, depot, duncan & fraser , tram 1

Contract of sale of land dated 22nd November, 1956 between Mr. W.N. Nicholls (seller) and Mr. G.A. & Mrs. M.L. Quirk (buyers) for piece of land being lot 17 of plan of subdivision No. 33303 lodged in the office of titles being part of Crown allotment 16 section 7A, Kangaroo Flat and situate corner Camp and carpenter Streets, Kangaroo Flat, together with brick veneer dwelling and all sundry, also all electric light fittings and shades. Price 4,500 pounds.organization, business, h.a. & s.r wilkinson real estate

Two red covered auction catalogues with black printing for a sale on the 6th, 7th & 8th March 1984 at the Australian National Animal Health Laboratory, Geelong, Vic. For sale were Transportable Site Buildings, Main Office, Main Store, Fitters, Carpenters & Test Workshops, Construction Materials, General and Electrical Equipment, Fork Lifts, Motor Vehicles, Tip Trucks, Bobcat, Scaffolding and Large Quantities Brass, Copper & Black Pipe Fittings. J. H. Curnow & Son Pty. Ltd. Were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - australian national animal health laboratory, john holland, j h curnow & son pty ltd, f c dyett, i m dyett, n f dyett, bolton bros pty ltd print

Stamped enamelled round brass piece with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass. Has the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamelled and outer ring the words "Electricity Supply Department, Provincial Tramways". This was in blue enamel. On rear stamped the number "127" Was issued to Mr. Adam Balloch, carpenter with the SEC depot. Had a piece at the top of the badge for the ring to pass through, but this has been damaged and transferred onto the badge proper.tramways, trams, employees pass, tickets, provincial tramways, badges

Joan O'Shea Collection. Central Deborah Gold Mine Bendigo. Promotional material. Chronological History, Poppet legs and shaft, Change Room, Caretakers or rag pickers room, Drying room, first aid room, carbide light room, Underground, carpenters shed, ore bins and loading bays, stamper battery, wilfley table, berdan pans, laboratory, display room, boiler, stroke hold, winding engine, boiler feed pump, electric driven compressor, steam driven compressor, blacksmith's shop.Photograph Courtesy Philip Beer.mining, marketing, central deborah mine.

Made at Bogong Village by a Swiss Carpenter. Used by Sylvia Hogan-Edwards (nee McMahon). a student at Bogong Primary School in 1941 as an 8 year old. She has included a photo of a group of skiers at the School at Howmans Gap dated 26th July 1946. This photo was also in the Sun Newspaper. Sylvia is wearing a 'pixie hat'. Sylvia says she was 11 years old which would make it 1944. Photo is located in Photo Folder Snow Sports.Wooden cross country snow skis with steel bindings shaped to attach, with 6 screws, to the wooden ski and to hold on the sides a ski boot to slide in. It has remnant leather strap bindings attached to the steel to hold the ski boot. There is a woven cotton tie strap holding the pair of skis together.

This tool, with several others in a collection, is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and in 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the funders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This item is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a metal vice tool with a circular ridged column and a turning handle at its end. The item is designed to be clamped onto a bench or table so that objects can be firmly clamped into the tool to be worked on in some way. vintage tools, henry phillips, warrnambool

This tool is one of several tools in a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 he formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This item is of interest as a good example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a boat-shaped wooden plane tool. Part of the top of the body has been gouged out and a metal blade inserted. This blade, with a wooden piece resting on it, protrudes out the base and forms a planing mechanism. vintage tools, henry phillips, warrnambool, history of warrnambool

This tool is one of several in a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy and in 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This item is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a large wood plane tool. It is rectangular in shape and has a centre piece gouged out and a metal blade protected by a wooden piece inserted into the top hole and protruding at the base of the body to form a planing tool. The metal blade has a straight edge. A wooden handle at the end of the tool body has been broken off but is retained with the tool. vintage tools, henry phillips, warrnambool, history of warrnambool

This chisel is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool has a wooden handle indented in the middle to give a firmer grasp and a metal blade inserted at the end of the handle to form a chiselling straight edge. The metal blade is held at the handle end by a band of metal. The wood in the handle has been gouged out and broken at the top end on both sides. Traces of paint are on the handle and the blade is rusted.vintage tools, henry phillips, warrnambool, history of warrnambool

This tool is one of several tools which are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool is of interest as an example of a home-made vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small mallet with a wooden handle and a cylindrical-shaped piece of wood inserted into the handle to form a mallet head. The head section is reinforced with a piece of curved thin metal. The ends of the mallet head are very worn. This is a home-made tool. vintage tools, henry phillips, warrnambool, history of warrnambool

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a chisel with a wooden handle that is in two segments and has a groove in the centre. The end of the handle has a cylindrical piece of tin attached. The chisel inserted into the handle is metal with a straight edge. The metal is a little rusty and there are traces of paint on the handle. vintage tools, henry phillips, warrnambool, history of warrnambool

This hammer, along with several other tools, is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the death of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a metal hammer with a wooden handle. The hammer has a rounded end. The handle has split slightly in some areas and has some cream paint spots. vintage tools, henry phillips, warrnambool

This tool, with several others in a collection, is believed to have belonged to the Warrnambool carpenter, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and in 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of interest as a good example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a metal hammer head inserted into a wooden handle. The hammer head is flattened in the centre.vintage tools, henry philips, warrnambool, history of warrnambool

This tool is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of some interest as a good example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a metal rod in a u-bend shape with a wooden handle in the middle of the bend and another circular wooden handle at one end of the metal rod. There is a metal piece at the other end of the rod for the insertion of a drill and a turning stud for clamping the drill in place.vintage tools, henry phillips, warrnambool, history of warrnambool

This tool is one of a collection of tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and came to Warrnambool where Henry formed a partnership with Christopher Beattie to establish the undertaking firm of Beattie and Phillips. This business continued after the deaths of the two founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved with the management of the Mechanics Institute. This tool is of interest, firstly because it is a good example of a vintage tool and secondly because it is a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small hand drill with a metal piece containing a composite material handle at one end (for one hand) and a metal piece at the other end for the insertion of a drill. Attached to the main metal piece is a circular piece of metal with spokes and a wooden turning handle (for the other hand). The handle is attached to the circular spool by a metal screw. vintage tools, henry phillips, warrnambool, history of warrnambool

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a metal tool with a curved centre section and two hollow pieces at the ends acting as handles. The blade for planing is curved and the degree of the curving can be changed by the adjustment of two metal screws. vintage tools, henry phillips, warrnambool

This plane tool is believed to have belonged to a Warrnambool carpenter, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849 and lived for some time in Port Fairy. In 1865 he formed a partnership in Warrnambool with Christopher Beattie and established the undertaking business of Beattie and Phillips. This business continued on after the deaths of the founding partners, Beattie and Phillips and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics’ Institute.This tool is of interest, firstly as an example of a 19th century carpenter’s tool and secondly as a memento of the 19th century Warrnambool businessman, Henry Phillips. This is a wooden plane tool with a boat-shaped body curved at the sides and a wooden piece inserted in a top opening. This wooden piece holds a metal blade which protrudes at a slit opening in the base of the body. The straight-edged metal blade and the wooden piece are held together by a metal screw. vintage tools, henry phillips

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time at Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a piece of wood with handles at each end and a raised piece in the middle. A straight metal blade has been inserted into the base of the raised piece of wood. The metal piece has two prongs at the end which have been fixed into the wood.vintage tools, henry phillips, history of warrnambool

This item is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived in Port Fairy for some years. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a piece of wood shaped to make two handles at the ends and a middle piece that has a metal blade inserted at the top. The metal blade has two projecting ends that fit through the middle wooden piece. When held upside down this item is used as a planing tool. vintage tools, henry phillips

This item is one of several tools believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a tool with a rectangular-shaped metal bar with an upright metal piece at the end of this bar. Attached to the metal bar by two metal bolts is a U-shaped metal lever. This lever is movable. vintage tools, henry phillips, history of warrnambool

These items are among several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. These nine tools are small wooden planes, similar in size and design. In each tool the main wooden section is rectangular in shape with an additional wooden piece attached to one side. In each a metal blade has been inserted at an angle into a slot on top of the main wooden piece and a small wooden piece rests on the blade. The blade protrudes at the base of the main wooden piece to form a planing mechanism.vintage tools, henry phillips, warrnambool

These tools are part of a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. These items are of interest as examples of vintage tools and as mementoes of the Warrnambool carpenter and businessman, Henry Phillips.These five items are wooden plane tools of a similar shape and design, with one plane (.5) being less thick in its body. They have a wooden rectangular-shaped body with a piece cut-out close to the centre base. A metal blade resting behind a wooden piece has been inserted on an angle into the central hole through the top. This forms a planning mechanism. vintage tools, henry phillips, warrnambool, history of warrnambool

These items are among several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. These tools are retained as examples of vintage tools and as mementoes of the Warrnambool carpenter and businessman, Henry Phillips.These are nine brown wooden tools, rectangular in shape and similar in size and design. An extra piece of wood adjoins one side of each tool. A thin metal blade has been inserted at an angle in each tool in a slot at the top of the wooden blocks and these have small wooden pieces resting on them. The blades protrude at the base of the wooden blocks to form planing mechanisms. vintage tools, henry phillips, warrnambool, history of warrnambool

William Stephen McShane (1897-1918) held a commission in the 67th Cadets, Golden Square, before joining the 6th Australian Battalion. He was wounded in 1916 and was then killed in Action in France 9/8/1918. Prior to the war he had been employed by Mr Sweeney as a carpenter and joiner. Fred Fielding (1895-1918) was a member of the 28th Australian Infantry when he was killed in Action 8/8/1918. His family lived in Breen Street, Bendigo.Bendigo Advertiser ''The way we were'' from 2002. Home-grown heroes: a tribute to missing heroes of the South Bendigo Football Club Lieut. W. McShane (top) and Private F. Fielding (bottom). An extract from the South Bendigo Football Club souvenir programe premiers 1920.newspaper, bendigo advertiser, the way we were

This tool is one of several tools in a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy and in 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This item is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a rectangular-shaped wooden tool with curved edges. The top centre of the tool is gouged out and a straight-edged metal blade with a wooden piece on the front has been inserted through the top hole and protrudes out the base of the tool to form a planing mechanism. vintage tools, henry phillips,, history of warrnambool

This is one of several tools in a collection that is believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is retained as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This tool has a wooden rectangular-shaped base with curved edges. A portion of the top of the wooden piece has been hollowed out and a wooden piece inserted. Placed behind this wooden piece is a metal blade which protrudes out at the bottom of the main wooden piece to form a planning mechanism. The blade is curved at the end. vintage tools, henry phillips, warrnambool

This item is one of several tools believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute.This tool is of interest as an example of a vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips.This is a rectangular wood plane, possibly home made. The inserted wood handle may have once been the handle of a saw. A metal blade inserted at the top emerges at the base to form a planning mechanism and rests against a piece of wood.vintage tools, henry phillips