Document. Minute book. 12/8/1938 - 5/11/1954 Letter - 6/1/1947 - Bernard Keogh - 18/12/1946 - Kia-Ora Products - New Company Act, 1938 Rules - Suggest MinuteMcColl, Rankin & Stanistreetorganization, business, south nell gwynne, mccoll, ramkin & stanistreet, south nell gwynne, gold mining, minute book, kia-ora products, b keogh

Document. Manila folder containing - probate certificates of Anne Ireton Bruce Lewis & Bernard Palmer Sutton & Frederick Henry McIntosh. - water rates of Central Nell Gwynne (3copies) dated 6.11.58 - A letter dated 20/12/57 confirming H. Marshall worked at the mine. This was for insurance purposes & as the mine was undergoing voluntary liquidation the matter was to be investigated. - letter dated 10.6.57 granting Mr Andrew Charles Dingfelder permission to connect to the Company's pipeline. - Certificates regarding Voluntary liquidation of the Co.McColl, Rankin & Stanistreetorganization, business, central nell gwynne, mccoll, rankin & stanistreet, central nell gwynne, gold mining, voluntary liquidation, a lewis, b palmer sutton, f mcintosh, h. marshall, a dingfelder, water rates

McColl Rankin & Stanistreet, New Star Gold Mine Harrietville NL. a/ Department of Mines 20.2.1934 laboratory reports results, 3 receipts attached, list of general expenses, quarter ended 30.4.1934, heading Dargo ''Gold Butterfly'' Gold Butterfly crossed out hand inscription Gold Reefs Syndicate, Wanangatta, Dargo. b/ copy of Purchase agreement of leasehold land for the purpose of mining. Dated 28.6.1934. c/ Payments by R.A. Rankin - Office Account A/C Leases No's. 5187 and 5195 Dargo, Gippsland, prior to exercise of option. Inscription: Paid by New Star Company ?? On ?? 1934 ?? ?? ??. d/ Letter: purchase of Leases No's 5187 & 5195 Black Snake Black Snake Creek, Dargo. Dated: 22.8.1934. e/ letter acknowledging receipt of payment for application of Lease No. 5187, lease will be delayed until precise area is determined. Signed: ?? Rankin. 3 pence stamp for stamp duty attached. Dated: 23.8.1934. f/ Memo, Mr Grelis. Re Leases No's 5187 & 5195 Dated: 4.9.1935. Signed: ?? g/ McColl Rankin & Stanistreet business envelope. Envelope labelled New Star Gold Mine Harrietville. 46.organization, business, gold mine, mccoll rankin & stanistreet, new star gold mine harrietville nl. dargo ''gold butterfly'' gold reefs syndicate, wanangatta, dargo black snake black snake creek 1934 1935

Documents: North Deborah Mine - Annual Reports, Annual Reports of North Deborah Mining Company No Liability for 1969 & 1970, Part a in 1969 & Part b is 1970, printed pages several pages each stapled, markings read ''North Deborah Mining Company NL, Annual Report and Notice of Meeting'' printed on front page of each.organization, business, industrial - mining, mccoll rankin & stanistreet, mining, gold mining, north deborah

Leather bound book. The cover is sculpted cardboard with burgundy leather, heavily gilt embossed with pictures and text. The edges of the front and back covers are bevelled and gilt embossed. Silk endpapers at front with marbled endpapers at back. Numerous coloured illustrations, b/w illustrations. Bi-lingual in English and German. Abridged Bible text, as it is a travelling saleman's copy. Some blank ruled pages for subscribers details.Numerous family Births and Deaths noted, from 1850 to 1977. Various photos and tokens under the 'Family Portraits' pages at the rear.bible, family bible, saleman, travelling representative, family history, births, deaths, register, gilt embossing

Document.Copy of Williamstown Historical Society Newsletter No 17 (1977).On the second and third page of this Newsletter is an article entitled ''The guns of the 'Nelson''', written by Doug Mills, Castlemaine. The Warship NELSON underwent alterations in 1860, including cut down to two decks and lengthened, her armaments reduced to 72 guns. Two 7inch 68 pounder guns were added to her armament. In February 7 1867 she was officially given to the Colony of Victoria by the Imperial Government. At the time her Commander was Captain Charles B. Payne. The Warship reached Melbourne in 4th February 1868. Relics of the NELSON were auctioned at Williamstown Victoria Naval Depot, and her two anchors are preserved for public display at Williamstown. An active demand for a share of the guns from various towns in the State. Ballarat received four (4) guns, Bendigo and Castlemaine two (2) each, while one has been given to each of the following towns: - Ararat, Tarnagulla, Hamilton, Bacchus Marsh, Echuca and Geelong. Collection of Lansell related documents: a. Copy of photograph - Lansell's Big 180 Victoria Hill - early 1870s - New Chum Hill in background. B. Lansell Estate mines - compiled from the annual report of the Hon Minister of Mines for Victoria, 1906. A listing of the George Lansell Mining Company interests at the time of his death. These were, New Moon Co, N.L., Clarence, New Prince Of Wales Co. N.L., Virginia G. M. Co., Catherine Reef United Co N.L., Great Northern Co N.L., Williams United, McDuff Amalgamated Co, South Mungo Co, South Prince Of Wales Consolidated, Constellation Co. Golden Pyke Co, Johnson's Reef Extended Company, Golden Age Co., Princess Dagmar Co, New St Mungo Co, Johnson's Reef Co, North Johnson's Co, Collman and Tacchi Co, Confidence Extended Co, G. Lansell Sandhurst Mines, Pearl Co., Windmill Hill Co., United Hustlers and Redan, Koch's Pioneer Co., Hercules and Energetic Co., Lansell's Comet, Cornish United Co., Ironbark Co., Hustler's Reef Co., and No. 1 Lansell's 83, Carlisle Co., Great Extended Hustler's Co., Victoria Consolidated Co., Great Central Victoria Co., Victoria Quartz Co., Victory and Pandora , Lansell's Big 180, Tambour Major, New Chum and Victoria Co., Garden Gully United Co., G. Lansell, Lansell's 222, Lazarus Co., Sea Amalgamated Co., Hustler's Royal Reserve Co., Horwood and Burrowe's Co., New Chum Consolidated Co., G Lansell's Sheepshead, Gariboldi Co., Londonderry Co., Shamrock Co., Great Britain Co., Fortuna Hustler's Co., Eureka Extended Co., G. Lansell's G.V.L., New Red White and Blue Consolidated, Great Southern Co., Lansell's Concord Mines, True Blue Co., G. G. Consolidated Co., Extended Red White and Blue Co., Great Columbian, Sedgwick and New Birthday. Also, a listing: ''Among the biggest yields to ate (sic) (date?) in ozs or Pounds were''; New Moon.Co. N.L. 180,087 ounces, Clarence £303,932, Catherine Reef United N.L. £762,815, Great Northern Co Ltd £394,525, Johnson's Reef Co 277,320ounces, Windmill Hill Co. 113,842ounces, Hustler's Reef Co. And No.1 1,144,923ounces, Carlisle Co 307,835ounces, Great Extended Hustlers Co £1,038,125, Garden Gully United Co. £1,653,900, Great Southern 97,752ounces, New Chum Consolidated 89,526ounces. This part (b) has handwritten inscription ''compiled by J Sarvaas MCE(??) Certified Mining Surveyor; 22/8/06''; c. Copy of Deed dated Dec 1886 between George Lansell, Wooten Lansell and the Bank of New South Wales relating to a wall and windows and openings etc etc. (3 pages of legalese!!!!!). Also, a (related?) page copy of a Grant -by purchase to the Bank of New South Wales with a date of August 1855 on it ''Enrolled in the Office of the Registrar of the Supreme Court of the Colony of Victoria - signed by Acting Registrar.document, gold, mines

Typed notes mentioning the history of the Hepburn Family and Margaret Cotton McLachlan coming by sailing ship to Australia to marry her fiance who was a miner in Sandhurst and extracts from the diary of William Thompson.document, names of bendigo pioneers, bendigo historical society, settlers under sail, alexander hepburn stone, loch ard centenary commemoration committee, professor j. j. auchmuty, mr don charlwood, andrew hepburn, james hepburn, mary queen of scots, black bothwell, captain hepburn, the 'hope', george b crow, george baker, the 'marlbro', archives department of the latrobe library, mr loman, the 'david clarke', captain hepburn of the royal scots, sir john hepburn, mr howard hepburn, victoria reef lease no 60, ebenezer neill, becker, stirton, margaret cotton mclachlan, ina hepburn, the 'donald mckay', black ball line, james baines and company of liverpool, onedin line, passenger contract ticket, james mclauchlan, christian ferguson, robert miller, william thompson, mr stanwin, the 'shomberg', itchell and son, the 'dunbar', margaret stirton, canon horace stirton, dr james nish, p pentreath, jane pentreath, st andrew's presbyterian church sandhurst, james hepburn, corporate high school, bendigo high school, iron bark school of john rae, rae's hill school, mr john rae, rae anderson, bendigo branch of the royal historical society of victoria, victoria reef mine, 'gourdie farm', mr howard hepburn, john fortey, margaret cotton hepburn

Although Lee DeForest invented the triode vacuum  in 1906, it was not employed in hearing aids until 1921. The first hearing aid using a vacuum tube was purported to have been made by Earl C. Hanson. He called his hearing aid the Vactuphone. It used one small peanut tube (below right) to amplify the output of a carbon hearing aid. The Globe Hearing Aid Company and Western Electric collaborated to manufacture the Vactuphone. By the early 1940s, Raytheon had developed miniature vacuum tubes. It was these miniature vacuum tubes that made body-worn hearing aids a reality. Unfortunately, the power requirements of these aids made it necessary to use two relatively large batteries—an "A" battery to power the filaments of the vacuum tubes and a "B" battery to supply the high-voltage for the plate current. The batteries were worn external to the hearing aid itself and the name "Two-piece" hearing aid was used to describe them. Until about 1945 "Two-piece" hearing aids were the norm. However, improved vacuum tube design reduced current requirements. As a result, battery manufacturers were able to reduce the size of the batteries used in hearing aids. At the same time, electronic components were also being miniaturized. This allowed the hearing aid manufacturers to design hearing aids with internal batteries. After 1945, these "One-piece" hearing aids quickly replaced the more cumbersome "Two-piece" hearing aids. With continuing improvements in both batteries and components, hearing aids continued to reduce in size until 1953 when the vacuum tube was suddenly supplanted by the transistor.Fawn plastic hearing aid with metal clip on back and wires leading from the bottom. Made in the USA, sold by Angus & Coote as the Sole Australian Agents. The Model is the Sonotone 700. Two dials one on each of the top corners."ANGUS & COOTE/Sole Australian/Agents/C D C" Printed in black on the back, top left hand corner. "SONOTONE/700/SERIAL NO/843218/MAD IN U.S.A./SEE PATENT NOTICE/IN INSTRUCTION BOOK" imprinted on back, centre middle.deaf children australia, hearing aid, sonotone hearing aid, sonotone 700, angus & coote

Former ADF - Army Bell 206 B-1 Kiowa helicopter (incomplete).A17-007kiowa, helicopter, navy, bell company, transport

Large brown glass bottle in original packaging once contained 1lb of ether. The bottle is wrapped in brown paper wrapping with black and red print on a white label. It reads [in red ink] POISON /NOT TO BE TAKEN / WOOLWICH ELLIOTT [logo] / [black ink] 263 61 / Anaesthetic Ether / B. P. / NET 1 LB. / This ether contains 0.002% w/v of Hydroquinone as a / preservative, in accordance with the B.P. / [red ink] CAUTION: Keep well corked in a cool, dark place / [black ink] WOOLWICH-ELLIOTT / CHEMICAL COMPANY PTY. LTD. / SYDNEY / USE BEFORE JAN 1964 / [in red ink] HIGHTLY INFLAMMABLE / [black ink] MADE IN AUSTRALIAether, anaesthetic, poison, glass, bottle, woolwich-eliott chemical co, sydney, anaesthetic ether, hydroquinine, inflammable

This is the emblem of EMU (Experimental Miltary Unit) who were officially known as Royal Australian Navy Helicopter Flight Vietnam (RANHFV). The unit was formed in 1967 and integrated into the US ARmy 135th Assauly Helicopter Company until 1971. The February 1969 RANHFV Report of Proceedings contained the first reference to the unique unofficial badges worn by the men of the 135th AHC. It stated: "In an endeavour to boost the morale and unity of the Company, the Commanding Officer offered $25 and a 3-day pass to Vungtau for the designer of a new Company Crest and NAMAE Hughes’ entry won the competition. It is a very impressive combination of an anchor and US Army wings in a laurel wreath with USA-RAN inscribed in a scroll above the motto; GET THE B... JOB DONE written below". A further reference was made to the badge in the 16 May 1969 Royal Australian Navy "Navy News", which ran a story on the emergence of this unique badge that has become synonymous with the unit and remains so to this day. Source: https://seapower.navy.gov.au/ran-helicopter-flight-vietnam-history A blue cloth badge with white wings above a gold anchor with the number 135 is in the middle of the wings in white with red and white stripes underneath. On the anchor in red is the word EMU. Above the wings in red is USA RAN. At the bottom of the badge in white letters are the words Get The Bloody Job DoneGet The Bloody Job Donecloth badge, cerberus collection, 135th, emu, navy, helicopters, us army, assault helicopters

Used in Pacific War during WWIIBlack covered Electro Mechanical analogue computer with small indicator dials with two divisional connected boxes. Mounts on Minneapolis Honeywell 'stabilizer' unit.Minneapolis Type G1029 A3CAZ HZ 26 Volts DC CV. Serial No. C-24825 B3430

Compass believed to be from a 'Betty' or 'Dinah' Japanese Aircraft.Model 9 - 2 magnetic type compass for aircraft YOKOGAWA Electric Company. Made in August 1942. Serial No. 8305411a18

Used by pilots during WWIIPilot's Notes for Bristol - Hercules V1 Engines in Wellington aircraft.Issue No. 1 February 1943 (M.D. Frecker) These Notes are applicable only to engines running on 100-octane fuel and are complementary to information given in official publications.a22.05

Between Pratt & Whitney and numerous licensed companies, there were over 180,000 of these engines manufactured in a number of specifications. The B-24 Liberator would have been their major recipient but other famous aircraft using the same engine were the Consolidated Catalina flying boat and the Douglas DC3/C47/Dakota. Refer Wikipedia link for other aircraft that used this engine.As a result of the significant and ongoing usage of these engines in civil aircraft such as the Douglas DC3, they are by no means rare. Many parts can still be sourced new and there are several companies that have the capacity to rebuild these engines to an airworthy standard.The Pratt & Whitney R 1830 is a double row 14 cylinder air cooled radial engine with a capacity of 1830 cubic inches (30 litres), developing some 1200 horsepower at a maximum 2700 rpm.radial engine, twin wasp, r1830

Citation for extraordinary heroism by D company 6th Battalion while engaged in military operations in Vietnam on 18th August 1968. Signed by Lyndon B Johnson at the White House May 28 1968extraordinary heroism citation

A black and white photograph of Townsville, Queensland 18/08/1968. Emblems of the United States Presidential Unit Citation, conferred upon D Company, 6 RAR by the President of the United States of America Lyndon B Johnson. These boxed emblems were presented to the next of kin by Prime Minister of Australia The Right Honourable J G Gorton MP, of some of those who paid the supreme sacrifice in the Battle At Long Tan 18/08/1966photograph, d coy, 6 rar/nz, battle of long tan, john gorton, president johnson, gibbons collection catalogue, emblems of the united states presidential unit citation

Unframed b/w photograph of sign, 135th ASLT helicopter company (EMUS); 614th Trans Det (CHFM)); 68th SIG Det (AVIONICS); RAN Helicopter Flt. Vietnam.135th aslt helicopter co. emus

Sectioned steam pump so that the pump workings can be seen. Inscriptions & Markings: Tangye Birmingham, This steam pump was presented by the colonial gas Assn Ltd (brass plaque) The Colonial Gas Association was originally formed in London on 2 February 1888, as The Australasian Gas Association Limited. The primary objective of the company was to provide investment capital to help finance the construction and management of gasworks being established by the London engineering firm John Coates & Co in metropolitan cities and regional towns throughout Australia and New Zealand. By 1890, the Australasian Gas Association had acquired gasworks at Benalla, Shepparton, Wangaratta, Warragul, Maldon and Seymour, and had constructed a large gasworks at Box Hill to supply the eastern suburbs of Melbourne. In 1893, the company's name was changed to the Colonial Gas Association Limited. During the 1890s, the company acquired regional gasworks in Queensland, Western Australia and South Australia, followed by its first gasworks in New South Wales, in 1911. In 1914, the company consolidated its metropolitan supply area by purchasing the Oakleigh and Footscray gasworks. Further expansion occurred in the 1920s with the purchase of established gasworks at Williamstown, Frankston and Dandenong and the acquisition of ten further gas undertakings in Queensland and New South Wales, making the firm the fifth largest gas producer in Australia. info from The Colonial Gas Association Limited, circa 1893 https://collections.museumvictoria.com.au/items/1553322 Originally formed by the five Tangye brothers from Cornwall as James Tangye & Brothers in 1857, this Birmingham engineering firm grew to become one of the largest suppliers of jacks, pumps, steam and oil engines, hydraulic presses, gas producers and machine tools in the late 19th and early 20th centuries. The successful sideways launching of I.K. Brunel's 'Great Eastern' from the mud of the Thames in 1857 using Tangyes hydraulic jacks gave the firm much needed publicity and new orders flowed in. To finance expansion, George Price provided additional capital and the company name became Tangye Brothers & Price in 1859. A new factory known as the 'Cornwall Works' was built in Clement Street, Birmingham. In 1872, the firm became Tangye Brothers and in about 1879- 1880 began production of internal combustion stationary engines based on Horace Robinson's patents, later using the Otto four-stroke design for its Soho range of gas engines. Examples of the Soho engine were exhibited by the firm at the 1880 Melbourne International Exhibition. Petrol and oil engines were made from the 1890s onward, and by 1910 had developed into the Model B, BR and AA series engines. Tangyes supplied custom-built pumps and presses for particular applications, becoming a major exporter of engineering equipment. In 1884, Tangye Brothers opened a custom-built branch office, showroom and warehouse in Melbourne at Cornwall House in Collins Street West, advertising the full range of engineering products. These lantern slides images are taken from Tangyes product catalogues from the 1910-1925 period and are believed to have been used as sales promotional aids in Australia by the Tangye Brothers. info from https://collections.museumvictoria.com.au/articles/4670 Historic - Industrial Steam Operated Water Pump built by Tangye Bros and used by the Colonial Gas Company - Melbourne, Victoria, AustraliaSectioned steam pump so that the pump workings can be seen. Tangye Birmingham, This steam pump was presented by the colonial gas Assn Ltd (brass plaque)puffing billy, steam pump, sectioned, tangye bros

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

BENWERRIN COAL COMPANY SKIP This quarter ton coal truck or skip was used at a small mine situated at Benwerrin near Deans Marsh in Victoria’s Otway Ranges. The mine first opened in 1899 and closed in 1904. With the fuel shortages due to World War 2, the Benwerrin Coal Company reopened the mine in 1941. The coal was loaded into skips and winched out of Box’s Creek valley on a narrow gauge incline to a loading point that was close to the Deans Marsh-Lorne Road. It was then taken by road to the Deans Marsh Railway station. The average gradient of the tramway was 1 in 4 over a length of just under 500 metres (1600 feet). The gauge of the tramway has often been referred to as 375mm (or 15 inches) as shown on the map opposite taken from “Sawdust and Steam”. However, actual measurements of the wheels show the gauge to be 400mm (or 16 inches), which is quite unusual as is the small size of the skip itself. The mine produced up to 30 tonnes of brown coal each week until it closed in 1949 and the incline tramway and its skips were abandoned. Preservation of this coal truck came as a result of interest by the Tramway Museum Society of Victoria (TMSV) in the Barlow or Box type rails that it ran on. These rails had originally come from the Beaumaris Horse Tramway and were obtained by the Benwerrin Coal Company from Hayden Bros’ abandoned timber tramway at nearby Barwon Downs. Members of the TMSV visited the mine in the 1960s only to find that most of the tramway had recently been recovered for scrap. There remained a significant number of relics around the mine adits including most of the skips. One of these remained in good condition and it was recovered for preservation in May 1967. It was restored but never displayed and a second restoration took place by the author over 2012/13 so that it could be placed in the Menzies Creek Museum where it was delivered in February 2013. Little remains of the mine today with trestles and sleepers destroyed in the “Ash Wednesday” Bushfires in 1983. References: Houghton, N (1975), Sawdust and Steam, Light Railway Research Society of Australia. Historic - Industrial Narrow Gauge Railway - Benwerrin Coal Company , Benwerrin , Victoria, AustraliaCoal Skip - made of Iron sheet and wrought iron frame & wheelsB,C.Co Melbournepuffing billy, coal skip, benwerrin coal company, narrow gauge

WW2 internment camp 1, Tatura, Army officers of headquarters and A Company 17th garrison Battalion no 1 camp Tatura. 15 June 1943. Back row (l to r): Captain E A Scates; Lieutenants J A Travers, S H Edwards, J H Trend, C L White, Captain F G Jones, Lieutenants B A Stinson, L P Brown, A L Mackay. Front row: Lieutenant E K Horwood, Captain W A A Tyler, Captain N E Bacon, Major A H Clerke, Captain G B Russell, Lieutenant Colonel F W D Forbes, Major G E Blight, Major E C Foster, Major J Morlet, Captain A E OwensGroup of 19 Army staff officers in uniform. Hut rear right. Tree background. Black and white hound dog foreground.internment camps, tatura internment camps, internment camp army staff, staff officers, captain e a scates, lieutenant j a travers, lieutenant s h edwards, lieutenand j h trend, lieutenant c l white, captain f g jones, lieutenant b a stinson, lieutenant l p brown, lieutenant a l mackay, lieutenant e k horwood, captain w a a tyler, captain n e bacon, major a h clerke, captain g b russell, lieutenant colonial f w d forbes, major g e blight, major e c foster, major j morlet, captain a e owens

Chan-Young Choi, minister, religious organization administrator. Ordained to ministry Presbyterian Church Korea, 1952. Chaplain Republic of Korea Army, 1952-1955. Missionary to Thailand Presbyterian Church Korea, 1955-1970. General secretary Bible Societies in Thailand, Bangkok, 1962-1970. Distribution secretary American Bible Society, 1971-1974. Consultant marketing Asia Pacific region United Bible Societies, Manila, 1974-1977, coordinator marketing, 1977-1978, regional secretary Hong Kong, since 1978. Chairman Printing Limited company of United Bible Societies, Hong Kong, since 1987. Vice chairman Amity Printing Limited company, Nanping, Republic of China, since 1987. Missionary to Thailand Presbyterian Church Korea, 1955-1970. General secretary Bible Societies in Thailand, Bangkok, 1962-1970. Distribution secretary American Bible Society, 1971-1974. Consultant marketing Asia Pacific region United Bible Societies, Manila, 1974-1977, coordinator marketing, 1977-1978, regional secretary Hong Kong, since 1978. Chairman Printing Limited company of United Bible Societies, Hong Kong, since 1987. Vice chairman Amity Printing Limited company, Nanping, Republic of China, since 1987. Fraternal delegate Christian Church of Asia., Hong Kong, 1991, others. Speaker, lecturer various professional meetings. Principal Korean school for Korean children, Bangkok, 1962-1966. [https://prabook.com/web/chan-young.choi/203634] Head and shoulders portrait of Rev. Chan Young Choi, who is dressed in suit and tie.Spectator 12/5/1976 p.8presbyterian minister chan-young choi, presbyterian church korea

Hardcover"Peter L. Dale Architecture-Building"mathematics, walsh st library

Ordained 1865. B: 1841 South Australia; D: 1911 Rookwood NSW. President S.A. Conference 1885 (but spelled as Newnham in the Ministerial Index).B & W head and shoulders etching of the Rev. Charles T. Newman.Rev. C.T. Newman, Adelaide. Published by request of the South Australian Book Company. Engraved by R. Rapkin from a photograph by Hammer & Co.newman, charles t., methodist minister, president of conference

A mounted b/w photograph of soldier E. Cousins, standing at ease with riding crop in his hands.Printed on front: Melba and Co. Melbourne Typewritten on white paper: E. Cousins Handwritten on back: Mrs Cunningham, Sunbury P.O. Victoria E. Cousins.melba and company, photographers, cousins, e., cunningham, - (mrs), sunbury, soldiers, george evans collection