This iron used its own fuel to heat up the iron rather than earlier flat irons that required heating on top of the stove."Comfort Self Heating" clothes iron. Spirit iron with wooden handle and metal tank for spirit fuel (probably benzene.). Different fuels were used, some with dire resultsflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, spirit iron, self, heating iron, comfort iron, comfort self heating iron

This iron was used by women to press the clothes from the mid 19th century. Coal embers were put inside, heating the base of the iron. Small bellows could be used to fire up the embers in order to keep the iron hot. This item is significant as it represents the appliances used by women from the mid 19th century until the advent of electricity.This charcoal iron is made of cast iron. It has a hinged lid so that embers can be put inside as the source of heat. The lid has a curved funnel and a wooden handle. The funnel kept the smoke away from the clothing. Bellows would be used to blow air into the iron and keep the coals burning. It has a wooden handle and the lever used to open the lid is also made from wood. There is a hole with a swivel cover at the back of the iron to check the coals. "S" on the swivel cover.domestic appliances, household items, women's work

A cannon ball, made of iron, is used as ammunition for a cannon and fired at a target.Cannons with cannon balls as ammunition were installed at Warrnambool for protection from possible invasion in the mid-to-late 19th century and early 20th century.Cannon ball, iron, painted black. Originally marked "16"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, cannon ball, ammunition, cannon, fortifications, military equipment, firearm

This iron was used by women, in their domestic role, to press the clothes from the mid 19th century. Coal embers were put inside, heating the base of the iron, to press the family's clothes and linen. Small bellows were used to fire up the embers to keep the iron hot. In the Kiewa Valley the embers would have been from the local hard wood growing on the farms.Ron White worked for the SEC on the Kiewa Hydro Electric Scheme. The iron belonged to his mother. Ron remembers being a boy of approximately 8 years of age, watching his mother do her ironing with this charcoal iron in the c1920s.This iron is made of cast iron. It has a hinged lid so that coal embers can be put inside for heat. The lid has a curved funnel. Bellows are used to blow air into the iron and keep the coals burning. It has a wooden handle and a lever (also with a wooden handle) to open the lid. There is a 2 and a half centimetre hole at the back of the iron to check the coals. The hole has a swivel cover.There is an embossed "S" on the swivel cover.iron, laudry, household, charcoal, antique, domestic, pressing clothes

Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal ovum forceps. Instrument resembles a set of scissors, with a ratchet adjacent to the handle to lock them at particular apertures. The end of each arm of the scissors ends with a metal loop, with grooves on the inner aspects of the loops for grip. The inner aspect of the forceps are engraved with the number '99'. The forceps are also engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.obstetrics

A 1949 travelling iron donated by Box Hill Historical SocietyServex Trademark was registered as an Australian trademark on 2 September 1947 and later became under Phillips Industries Holdings LtdTravelling iron in green leather case with electric cord. The iron is chrome with a black bakelite handle. The cord is covered in pink cotton with black bakerlite fittings.Servex, Made in Aust, W200 cat no B11 PS54

Photos of H Gibbons and grave site in Flat Iron Copse Cemetery France2 photos mounted on A4 paperH Gibbons The Grave of H Gibbons Amid those at Flat Iron Cemetery Franceh gibbons flay iron copse france world war 1

This item was used before the flexible sigmoidoscope (1996) and before the introduction of fibre optics late 1900s. The 1900s saw an incredible leap forward in the field of medical procedures. The ability to visually see what was happening within the human body (in real time) provided greater analysis about certain biological abnormalities during a greater time elapse than before. This procedure involved less trauma to the patient and greater flexibility to the Physician in treatment schemes. The rigid signoidscope, however provided the first visual of the colon in situ, but was highly invasive to the patient.This item was used in the Mount Beauty Hospital for qualified Physicians to use in their diagnostic evaluation of patients. This would not be an instrument used by a General Physician. This item is still a internal observatory method which may, in some instances, cause some minor complications. This item does point to the level of medical diagnostics, equivalent to those available in larger towns and cities, which brings this rural area (once considered to be an isolated region) to a higher level of medical care.This rigid 35 cm long sigmoidoscope (internal probe) is made of stainless steel outer hollowed rounded rod, which permits the use of both a fixed (very thin) lighting rod and two flexible cord lights access. Both the lighting rod and the flexible lights can be lowered within the main rod to allow the physician to see the colon at the bottom of the rod.These items are all contained within a specifically inlaid wooden box. The box has separate open compartments for the main instruments and a small lidded compartment containing replacement light bulbs. The hollowed tube permits the physician to visually observe the signoid (an S shaped part) of the colon.On the stainless steel main rod body are engraved the lengths of the body,in centimetres ,with numbers starting at the five centimeter mark and then every five centimetres up to the thirty centimetre mark. On the front inside rim of the box are two inlaid white plastic strips with black print, "ALLEN & HANBURYS Ltd" and the other "LONDON"medical diagnostics, sigmoidoscope examinations, medical examinations, hospital equipment

Milliners block of wood-shape comprising of base and four removable blocks set on vertical protruding iron rods, two of the side blocks have lobes.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This is a three phase meter meaning it may have been used at the Ballarat School of Mines or a commercial building. Homes are only one phase meters. It would have been attached to the wall - possibly within a box. The rods on the bottom would be the securing points - these are removable.Black base on 6 long screw in rods - removable. These used to attach meter to wall or box. Glass sides (longer sides missing) Three phase watt-hour meterBlack plate on front with full details and makers information.three phase meter, polyphase meter, metropolitan vickers, united kingdom, commercial use, screw-in rods

This iron was used by women to press the clothes from the mid 19th century. Coal embers were put inside, heating the base of the iron. Small bellows could be used to fire up the embers in order to keep the iron hot.This item is significant as it represents the appliances used by women from the mid 19th century until the advent of electricity.Brass iron with hinged lid, curved funnel and wooden handle with asbestos standdomestic object, iron, laundry, appliance

A cast iron weight, associated with the "Beehive Sock Knitter."A cast iron weight, associated with the "Beehive Sock Knitter."knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting

Steam hammers, invented by Englishman John Naysmith in 1841, made possible the forging of heavy iron bars and greatly reduced the physical labour required in forging. The hammers could vary in capacity (drop-force) from 400 pounds [lbs.] (181 kg) to 400 Tons (406.3 tonnes) and were once a part of most major engineering works. The Victorian Railways, from where the Museum exhibit came, used many hammers of varying sizes, their largest being at Newport Workshops measuring 30 feet (9.1 metres) high by 15 feet (4.6 metres) wide. Steam Hammers have made forging of heavy iron bars possible and has greatly reduced the physical labour required in forging. Historic - Victorian Railways - Industrial Steam Hammer Large metal mechanical steam hammer. made of iron & wrought ironC James Maker Melbournelarge, mechanical, steam, hammer

From the 17th century, sadirons or sad irons (from an old word meaning solid) began to be used. They were thick slabs of cast iron, delta - shaped and with a handle, heated in a fire. These were also called flat irons. Another solution was to employ a cluster of solid irons that were heated from the single source: as the iron currently in use cools down, it could be quickly replaced by another one that is hot. Source: www.wikipedia.orgLocal social history, domestic itemBlack cast iron with handleon top plate but not decipherabledomestic, iron, work, womens, laundry

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with traces of original black finish on handle. Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose

The '3' on this instrument indicated it was size 3. Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal scraper. Instrument consists of a large, six sided handle section, a short, thin shaft and a small, oval shaped scoop at the end of the shaft. The handle at the proximal end is in the shape of an elongated teardrop, hollowed out at centre. The number '3' is engraved on the shaft of the instrument. The shaft is also engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.'3'obstetrics

The '3' on this instrument indicated it was size 3. Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal scraper. Instrument consists of a large, six sided handle section, a short, thin shaft and a small, round scoop at the end of the shaft. The handle at the proximal end is in the shape of an elongated teardrop, hollowed out at centre. The number '3' is engraved on the shaft of the instrument. The shaft is also engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.'3'obstetrics

These small heavy flat irons were used to iron clothes prior to electric irons being invented. They were heated on a wood fire stove top and used quickly before they lost heat to iron items of clothing and other small items. These irons were very heavy so that they retained the heat when heated by a wood fire stove top prior to electricity being connected to houses. Flat irons were used in the 1800's and in the early 1900's.Heavy black small flat iron with handle on top. Iron tapers from flat wide base to rounded point. It has a round logo on front under the handle.Unreadable round possibly manufacturers logo.social history, irons, ironing, domestic items, 1800's

Iron would be heated on a stove, and used on pre-damped fabrics. In common use when electricity was not available, before electric irons were made. Also called "Sad-iron".Small heavy black iron with strong cast handle and flat bottom. "Silvester No. 5" flatiron, irons

This is an iron that would have been used for the very specific purpose of ironing very fine tucking.Purpose specific flat iron.Small double ended domestic iron with handle.domestic, cast iron, laundry, double, ended flat iron, heavy

The Australian Customs Service, Melbourne, donated a set of gauging instruments, and Port Fairy Customs donated another instrument, the Sike’s Hydrometer, to Flagstaff Hill Maritime Village, all of which were no longer required. However these ullaging tools were in use for many years by Customs officials, called Gaugers. Ullaging is a term describing the measurement of the amount of liquid remaining in a container of spirits such as a cask or barrel. It can also measure the free space or head space remaining. The primary role of customs officers in Victoria was to calculate the tariff or excise duty payable on goods imported into Victoria. (Excise duty is a tax on goods produced within a country, and customs duty is imposed on imports.) Customs officers spent a great deal of their time measuring and weighing goods, and then calculating the amount of duty to be paid by the importer. The tariffs for different products varied, and officers consulted published lists. Calculating the duty payable on a barrel of brandy was a detailed task. The gauger had to measure the barrel to determine its volume. Barrels were irregular in shape, and finding the volume required several measurements and checking tables of figures. Alcoholic content was then measured with a hydrometer. The duty paid varied according to the alcoholic strength of the spirits. Uniform national customs and excise duties were operative in Australia from October 1901. These tools were still being used in Australia in the 1950’s. The Federal Government still imposes excise taxes on goods such as cigarettes, petrol, and alcohol. The rates imposed may change in February and August each year in response to changes in the consumer price index. ULLAGING TOOLS (1) Head Rod - this instrument measures the diameter of the heads (top and bottom ends) of a cask or barrel. The shaped brass pieces on the head rod enable the diameter of a barrel to be measured inside the chimes at the head end. The slide rule could then be used to calculate the internal volume of the barrel. On the reverse side is a set of ullaging scales, used like those on any ullaging rule, to calculate the volume of liquid in a partially filled barrel. (2) Bung Rod – this instrument measures the diameter of a cask or barrel when it is lying on its side. It is a rod that fits into the ‘bung’ hole of a cask and is long enough be extended to reach the opposite side of the cask. The brass sliding pointer can be moved to mark the ‘wet’ line. When the rod is removed the bung measurement can be read from the scale on the rod. (3) Long Calipers - this instrument measures the length of the cask between the heads. It has two rules sliding beside each other, each end having another piece of wood fixed firmly at right angles downwards then turned inwards at the ends so as to reach over the heads of the casks without touching the projecting ends. The centre pieces enable it to extend or contract, changing the distance between the two other parallel sides, the distance they are apart being shown by the rule on the sliding pieces. (4) Cross Calipers – this instrument is used to take the bung diameters of casks, or "the Cross " as it is called. This instrument has two rules sliding beside each other, each end having another piece of wood fixed firmly at right angles downwards, together forming a 3 sides of a rectangle with the centre pieces enabling it to extended or contracted, changing the distance between the two other parallel sides, the distance they are apart being shown by a the rule on the sliding pieces. (5) Sike’s Hydrometer – this instrument is used to gauge the strength of different alcoholic spirits when fitted with the different weights in the set. Every set is individually calibrated to ensure that it meets the exact Standard Weight and Measure compliance, then every piece in that set is stamped with the same number by the Calibrator, to ensure that the measurements are taken using the same hydrometer set. [References: A Handbook of Practical Gauging, Janes Boddely Keene of H.M. Customs, 1861, F. Pitman, London; Customs Act, Volume 2, No. 1, April 1999; Old Customs House website ] Head Rod, ullaging gauge. Long wooden rod made of three joined sections, brass hook on end, sliding centre section with hook, measurements marked along each section as on a slide rule. Used for measuring diameter of heads of casks in order for Customs to calculate excise (tax) on the contentsflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, head rod, gauging rod, ullaging rods, measuring instruments, customs tax

A four piece set of cast iron weights, associated with the "Beehive Sock Knitter."A four piece set of cast iron weights, associated with the "Beehive Sock Knitter." A four piece set of cast iron weights, associated with the "Beehive Sock Knitter."knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting

Sad-irons or "solid" irons were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The handle was removed from the cool iron and re- attached to remove the hot iron from the fire. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer.The Curtis family were early settlers in Moorabbin Shire c1880 and used sad ironsA small, curved, flat iron, with attached handle, used for cuffs, collars and frillsSILVESTER'S/ PATENT/ SALTERS / No 3 with the pretzel & a arrow going through the centresad iron, kitchen equipment, pioneers, early settlers, market gardeners, sewing, craftwork, clothing, moorabbin, brighton, bentleigh, fireplaces, stoves

A cooper would use a flagging iron to insert reeds around the head of a barrel to tighten the head and stop any leaks. First the cooper removes the full and quarter metal hoops around the barrel, this loosens the staves and insert reeds around the head, prying the stave apart from the head with a flagging iron. Then he replaces the hoops to tighten the staves against the head and the inserted reeds to form a leakproof seal.An age old tool used for many hundreds of years in the making and repairing of wooden barrels and an essential tool in a coopers tool kit.Flagging iron metal painted black Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagging iron, coopers tools, barrel making, repairing barrel leaks, barrel head tightening

Polishing iron with curved convex sole for producing glazed finish on starched linen garments - circa 1880.Polishing Metal iron with curved convex sole."5"irons, laundry irons