The Mason jar, named after American tinsmith John Landis Mason, who patented it in 1858, is a molded glass jar used in home canning to preserve food. The jar's mouth has a screw thread on its outer perimeter to accept a metal ring or "band". The band, when screwed down, presses a separate stamped steel disc-shaped lid against the jar's rim. An integral rubber ring on the underside of the lid creates a hermetic seal. The bands and lids usually come with new jars, but they are also sold separately. While the bands are reusable, the lids are intended for single-use when canning. Glass jars and metal lids are still commonly used in home canning while they have been largely supplanted by other methods for commercial canning (such as tin cans and plastic containers). Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset.Clear glass preserving jar with metal screw lid grooved base for lid clip."AGEE / MASON / JAR" imprinted into side of glassflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jar, glass jar, preserving jar, food preserving, food storage, agee mason, agee mason jar, john landis mason

The Mason jar, named after American tinsmith John Landis Mason, who patented it in 1858, is a molded glass jar used in home canning to preserve food. The jar's mouth has a screw thread on its outer perimeter to accept a metal ring or "band". The band, when screwed down, presses a separate stamped steel disc-shaped lid against the jar's rim. An integral rubber ring on the underside of the lid creates a hermetic seal. The bands and lids usually come with new jars, but they are also sold separately. While the bands are reusable, the lids are intended for single-use when canning. Glass jars and metal lids are still commonly used in home canning while they have been largely supplanted by other methods for commercial canning (such as tin cans and plastic containers). Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset.Clear glass preserving jar "Agee Special" with metal screw lid grooved base for lid clip "AGEE Special MASON / JAR" imprinted into side of glassflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jar, glass jar, preserving jar, food preserving, food storage, agee mason, agee mason jar, john landis mason, agee special

The Mason jar, named after American tinsmith John Landis Mason, who patented it in 1858, is a molded glass jar used in home canning to preserve food. The jar's mouth has a screw thread on its outer perimeter to accept a metal ring or "band". The band, when screwed down, presses a separate stamped steel disc-shaped lid against the jar's rim. An integral rubber ring on the underside of the lid creates a hermetic seal. The bands and lids usually come with new jars, but they are also sold separately. While the bands are reusable, the lids are intended for single-use when canning. Glass jars and metal lids are still commonly used in home canning while they have been largely supplanted by other methods for commercial canning (such as tin cans and plastic containers). Item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset.Clear glass preserving jar "Agee Special" with metal screw lid grooved base for lid clip "AGEE Special imprinted into side of glassflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jar, glass jar, preserving jar, food preserving, food storage, agee mason, agee mason jar, john landis mason, agee special

Raymond Island Ferry Driver's Cap issued by Shire of Bairnsdale with new ferry in March 1969 Issued to Ferry Driver George BouldOnly cap in existenceOfficer peak cap White plastic with black leather peak and band Gold cord insignia Gold and Black embroidered Lifebuoy and anchor badgeManufacturer's plate 1 Underside of cap MELBOURNE 361218 EMERCO Oval Trademark with kangaroos each side REG TRADEMARK THIS IS YOUR GUARANTEE FOR QUALITY MADE IN AUSTRALIA Manufacturer's plate 2 Front inner brim SWEAT ABSORBER TEXTILE 100% SWEATPROOF raymond island ferry, ferry driver, ferryman, ferryman s cap, 1969

This seed box was made for Hiram Sibley for his seed house business. He sold seeds priced by the weight or the space they took up e.g. bushel. This box allowed for seeds to be divided by type, size or even date. The box was strong and easy to cart and store. It was also a handy item to 'recycle' as a storage container for other items. The Sibley seed box is a desirable collectors' item. A large variety of sizes and shapes are still available today in various stages of condition. Hiram Sibley developed seeds that were strong and the plants that grew from these seeds produced many seeds. Varieties of Sibley seeds and plants are still advertised for sale in modern times. HIRAM SIBLEY (1807-1888) - Hiram Sibley was born in America. He had a natural mechanical ability and became skilled in many trades. He and his partner Don Watson opened a sawmill then a machine shop and foundry. He became involved with Alfred Vale and Samuel Morse and their work on the telegraph. Eventually he became the first president of the Western Union Telegraph Company. Later, after leaving Western Union in the early 1860s, Sibley bought and sold railroads, manufactured sold, ran timber mills, and became involved in farming and seed supply. In this area he used his skills to engineer seeds that were stronger and develop plants that produced more seeds. The production of seeds became his main business. He bought land cheaply and improved to soil so that he could produce seed and grain, and graze herds of cattle. He became the owner of 14 large farms. Hiram Sibley earned the reputation "as the most extensive farmer and seedsman in this country". The business of Hiram Sibley & Co. was conducted his warehouse in Rochester and his seed house in Chicago. One department of the business sold farming equipment, another department imported ornamental plants from overseas countries Sibley went on to invest a large amount of money in a bank, and to be financially involved in the community by making large donations to public services such as a library and a school of music. At one point he was the richest man in Monroe county.This box is significant for its historic connection with Hiram Sibley, who is famous for many reasons, among which is his very profitable business of seed engineering to improve the production of crops. This box also represents the value of containers used for selling products in the 1880s, being re-used for other useful purposes. The box is an example of goods imported for use in Australia. The text and images of the box are an example of 1880s advertisingBox, wooden, with two brass hinges joining lid to base. Base has two wooden partitions, divided into three unequal sized compartments. Lid's underside has label with drawings of buildings and produce, text with maker's name and description of vegetables. Front edge of box has stencilled text and diagrams. Outside lid, and the other three sides, have no inscriptions. Made by Hiram Sibley & Co., USA. (Box is currently used to store quoits 1436.2 and cones of cotton thread 1436.3.)Marked "HIRAM SIBLEY & CO / SEEDS", "WAREHOUSE - "ROCHESTER N.Y. ", "SEED HOUSE - CHICARGO, ILL.", "SEEDS BY WEIGHT & MEASURE", "PUT UP BY / HIRAM SIBLEY & CO. / ROCHESTER, N.Y. AND CHICARGO, ILL."flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, hiram sibley & co, rochester n.y., seeds, wooden seed box, seed box, seedsmen, arable farming, chicargo illinois, seed house, seed engineering, seed distribution, seeds by weight and measure

Object. An elaborate item, with a light blue grosgrain ribbon background. An arched and a straight bar at the top state CORONA LODGE. A crown with fanned background, under which is a plinth and a clasp stating No 195 V.C. Below this is an inverted ^shape, highly engraved with a Greek eternity pattern, and decorative scrolling. From this shape hangs a rectangular shape 2 cms x 1.7 cms, which has a fine decorative edge, and a central motif. The underside of the ^shape is engraved as above.Front: CORONA LODGE No195 V.C. Back: Presented to Wor.Bro.W.R.WRIGHT I.P.M. by the BENDIGO CORONA LODGE No 195 V.C. 25.8.20?1organisation, masonic lodge, corona lodge medallion

This piece may originally have been Indian in origin. It was purchased by the donor at the Oxford Street Market in Paddington, Sydney.Small ceramic figurine of a woman giving birth, attended by a doctor. Scene depicts a woman in a white gown lying on her back an obstetric table, with her knees up and feet flat on the table. A doctor dressed in white is sitting on a chair at the end of the table, between the patients legs, with arms raised ready to receive a baby. Both figures in the scene have brown skin and black hair. A word is engraved on the underside of the base of the figurine, which may be the name of the artist, but it is illegible.obstetric delivery

A Spalding 'International Model S' tennis racquet, featuring: laminated convex throat; bevelled crown; hide strips along underside of shoulders; whipping around shoulders; and, deep-grooved, thick octagonal handle. Decal of model name, with wreathed medallions emblem, feature across throat on obverse. 'A.G. Spalding & Bros. Made in U.S.A.' logo encircling ball trademark features on throat on reverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Gut, Leather, String, Paint, Hidetennis

A Slazenger (UK) 'Lawn Tennis Ball' box. Printed on lid: 'BRITISH MADE / MADE ACCORDING TO / THE REGULATIONS OF THE / LAWN TENNIS ASSOCIATION / AND OFFICIALLY AUTHORISED'. On front of box is printed: 'EXCLUSIVELY USED AT/THE CHAMPIONSHIPS/WIMBLEDON/ SINCE 1902'. Colour advertisement adhered to underside of lid, depicting 1920s/30s tennis racquets. Contains all six unbranded balls, probably original. Balls contained in a string net bag inside box. Materials: Ink, Cardboard, Paper, Rubber, Wooltennis

Fine example of officer's accessory to hold map securely and protected from weather.Fine example of officer's accessorily to hold map securely and protected from weather.Hard fibre board panel with metal clips securing clear Perspex sheet covering map; canvas flap attached to one edge of board folding over and secured to other side of board with two metal press studs. Underside of flap has pockets for chinagraph marking pencils. Map is RACV road map of area southwest of Eildon Victoria probably a training area for 13th Motor Regiment. Also has two buckles to allow attachment to user's webbing.Stamped on cover flap "CG Hartley & Co 1942"map, motor, 13th, gippsland

All tramway platform crew were issued with a cap and were expected to wear it at all times. The number being the principal identification number for the public and Inspectors.Demonstrates uniform cap manufacture.Drivers/Conductors cap - navy blue cloth exterior, black cotton interior lining, with a plastic band at the front half of the cap terminating in two small MMTB metal buttons on either side, and black (green underside) plastic beak. Fitted with a MMTB badge and number 2975 - both nickel plated. Has two safety pins on the inside holding the number into position. Size 7 and 1/8. On inside clear plastic is a sheet of paper "To Ring Radio Centre". tramways, tram crews, mmtb, caps, hats

Production of the mugs was inspired by the interest of visitors in purchasing a mug like the ones on display created by an artist Catherine Bell in 2017 for the Sounding Histories exhibitions.This mug added to the Mission collection as a contemporary example of MTSV memorabilia and promotion and features bth current logo and image of the building complex.Pale gray ceramic drinking mug with a mid-blue lining and a large handle (1668). Colour image transfers decorating outer walls.The Mission to Seafarers logo in a blue oval with 'Caring for Seafarers since 1857' printed in blue underneath is printed on the front. On the back in dark gray is a stamped effect of a street scape with Mission buildings with 'www.missiontoseafarers.com.au . On the underside a paper lined is adhered with a printed barcode and price of $12.00. mtsv memorabillia, mug, souvenir, mtsv shop, marketing

White China milk jug with MMTB logo with a small handle. Made from China clay, glazed and vitrified or fired. Has a small formed spout, MMTB logo in dark green. On the underside has the words "Grindley Hotel Ware, England, Vitrified, Loftus Moran Pty Ltd, Melbourne. Patent. Has a crown or manufacturers mark on the top of the lettering. Possibly made for use at the Wattle Park chalet or head office. http://www.thepotteries.org/mark/g/grindley.htm - accessed 14-08-2014 indicates it was the mark used by the company from 1946. The photo on the website also had a date mark on the underside. http://museumvictoria.com.au/collections/items/259893/serving-plate-cream-ceramic-grindley-hotelware-co-england-loftus-moran-melbourne-1952 - accessed 14-08-2014, indicates that the item was made: Grindley Hotelware Co., Tunstall, Stoke-on-Trent, Staffordshire, England, Great Britain and imported by Loftus Moran Pty Ltd, South Melbourne, Victoria, Australia. See Reg Item 6068 for another example.trams, tramways, mmtb, crockery, grindley hotelware, loftus moran, wattle park

Clothing. Royal blue, single breasted blazer, with revere collar and three brass button front fastening. These three buttons and two smaller buttons on the sleeve cuffs, have the round sun symbol of Japan, and the Olympic Rings impressed into them. The breast pocket, with rounded lower corners has a cloth badge, 9.5 cm long X 6.5 cm wide, which is embroidered with a 5 cm diameter ball (of the sun) and five Olympic Rings in navy blue embroidery. One 20 cm long vent in lower centre back seam. Padded shoulders. Fully lined sleeves and front, while back is only lined across the shoulders. One inside pocket on each side front, has a button closure. Two pockets-22 cm long X 17 cm wide on either side of front, at lower edge. Single breasted. One small 1.4 cm diameter button, badge or Olympic pic, pin fallen from a blazer pocket. The button badge has a bronze like appearance, with impressed Japanese type characters on the surface. A pin type clasp at rear, thought to be a metal badge.All on inside of garment,right hand front. Toray® Toray Rayon Co. Ltd.Toray TETORON ® Riverloft ® Yarn Tailored by Mitsukoshi, Tokyo 1964. O Gold symbol Japan Olympic Rings 1964. Button have on underside: Tokyo 1964.costume, male, tokyo olympic blazer 1964

Assumed used at an Internment campInternment CampLarge spoon, stainless steel, with German Ensignia ( Eagle ) with Swastika underneathEngraved on underside of handle German Eagle Ensignia with Swastika in a circle underneath. T.W.S. 41. Might be a table spoon for measuring or serving spoon. Handle has bevilled edges and is scooped close to spoon bowl. Well used appearance, with scratching from cleaning, dark grey appearance.

The Little Pied Cormorant is commonly seen in Australia's wetlands. These birds reside amongst large flocks in locations where fish is plentiful. On the occasion that this bird is seen on inland streams and dams they will be solitary. This particular species willingly mixes with similar sized birds including the Little Black Cormorant. They feed on aquatic animals ranging from insects and yabbies and are labelled as benthic feeders because they find their prey on the seafloor. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.The Little Pied Cormorant specimen is a small bird with white and black colouring. The back of the head, neck, wings and tail are black while the undersides are a creamy white. The feet are webbed and are also dark in colouring. The bird has pale glass eyes and a medium sized bill and a long tail. This specimen is styled to look over it's left wing with its long neck bent to look in that direction. It stands on a wooden mount with a paper identification tag attached to the bird's right foot. The mount has the number 152 written on the wood.Swing tag: 21a. / Pied Cormorant / Catalogue page 41 / Mount: 152 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, cormorant, little piet cormorant, waterbird

Square hinged box inscribed on lid 'Anzac Commemoration 1926'. The box is covered with a thin, black leather-like material. The box is lined with cloth. The lower section of the box is lined with a mid-blue cloth which is imprinted, in silver, with the map of Australia in which five English farthings have been set. The coins are in the formation of the Southern Cross with a silver star shape around each farthing. The underside of the box lid has dark blue gathered satin lining. The coins are in uncirculated condition and are loose. The box is damaged.The box is inscibed in gold lettering with the following: "Anzac Commemoration 1926"

Purchased from an antique shop in Willunga, South Australia by Dr Malcolm Barnett, who then donated it to the collection.Glass feeding bottle. Bulbous glass bottle with openings at either end. The upper surface is rounded, and the bottom surface is angled to allow the bottle to sit on a flat surface. The upper end has a wider neck suitable for a rubber teat, whilst the lower end is narrower and may have had a valve attachment. Graduated measurement markings for tablespoons and ounces run along each side of the bottle. Embossed writing on underside of bottle reads "REG NO/47457", and on upper side reads "THE/SITAR/FEEDER/8 OZ/OR/225 ML".'THE/SITAR/FEEDER"infant feeding, infant care

Bell was presented to the Melbourne Legacy Club by the departing president E.R.F. Serman in 1929. It was used during Comradeship Committee meetings.E.R.F. Serman was the Melbourne Legacy Club president in 1928-1929. Comradeship Committee meetings were very important to the Legatees.18 Pounder Shell casing that has been polished and had a small brass hook welded to the base. The casing has been split and bears the signs of being hit with a hammer. There is an inscription engraved on the front. The shell is hung from a brass arch which has been mounted to a wooden base. Two small brass hooks on the base act as a mount for the mallet. The brass arch and hooks are attached to the wooden base via flat head screws from the underside. The mallet is constructed of a brass rod with a felt head.Presented to the Melbourne Legacy Club by E.F. SERMAN PRES.1928-9comradeship, committee, legatee event

Bell portion of a tramcar conductor's bell. Approximately. 100mm diameter, about 35mm deep with a raised or bossed hole at the top 4.5mm at the top. Bell possibly cast or pressed brass, appears to have been damaged or repaired due to excess brass in portion of the bell and on the underside where signs of brass welding are apparent. If from a horse tram, would have most likely been made by Duncan and Fraser of Adelaide SA. Given to the BTM 1995 by Doug Prosser, of the TMSV, said to be from Ballarat Horse Tram No. 1. horse trams, duncan & fraser, conductors bell, tramcar component

A Wright and Ditson 'Gold Star' tennis racquet, with: string whipping around shoulders and shaft; hide strips along underside of shoulders; and, fine-grooved, short, octagonal handle. Decal inscription across base of head on obverse: GOLD STAR. Wright & Ditson cursive logo along shaft on obverse, and across base of head on reverse. Wright & Ditson Championship logo with tennis player on ball trademark feature on shaft on reverse. Materials: Wood, Lacquer, Glue, Metal, Ink, Leather, String, Hidetennis

Part of 'Woolcock Gallery Collection' Exhibited CEMA 1989.Drawings of a flowering plant stem with flower details. On left is a flowering stem, with a woody central stem, small heart-shaped leaves and yellow and orange pea flowers. To right are studies of leaves and flowers: (t-b) top view of flower (yellow); flower detail; side view of flower; top and underside views of leaves; side view of bud. Each view is labelled in pencil and in typed letters affixed to paper. Mounted in double matt (white on faun) in glazed wooden frame with gold detail.Front: Pultenaea scabra (lower left) (pencil) Back: 30 (upper left) (pen)collin woolcock, botanical, woolcock collection, cema, botanical drawings

In the 1600s, William Harvey realised a finite amount of blood circulates in one direction through the body. Jean Léonard Marie Poiseuille introduced the mercury hydrodynometer in the early 1800s for measuring blood pressure. Karl von-Vierordt created the sphygmograph in 1855 and, in 1881, Samuel von Basch created the sphygmomanometer, distinct improvements on the hydrodynometer. In 1896, Scipione Riva-Rocci developed the mercury sphygmomanometer. American neurosurgeon, Harvey Cushing, was an early adopter, and advocate for monitoring patients during surgery and anaesthesia. Blood pressure monitoring is still an essential component of evaluating a patient’s condition.This blood pressure kit is housed in a rectangular, vinyl covered box with metal handle and press-stud lid release mechanism. The lid opens upwards and the glass blood pressure valve and plastic scale is attached to the underside of the lid. The measurements are written in black and go up in increments of ten, from 0 to 300. The glass valve has unidentified increments labelled in red, which is housed within a metal cylinder. The bellows is attached to the measuring valve via a dark green pressure cuff and rubber hose.Blue sticker affixed inside the kit: JOHN MARUM Ornate manufacturer's label: THE ARMOURED / ELLISCO / SPHYGMOMANOMETER / MADE BY / ELLIOTTS & AUSTRALIA DRUG / [indecipherable] LTD / CENTEN[indecipherable] MODELharvey cushing, blood pressure, measurement, anaesthetics, john marum, sphygmomanometer, elliotts & australian drug pty ltd, centenary model, cuff, bellows, ellisco, armoured

Philip Webley was born in 1813, he was the younger brother of James Webley who was born in 1807. Both were born in Birmingham. Towards the end of the 1800s, the firm claimed establishment in 1790, this must have been the date James and Philip's father or grandfather originally established a bullet or gun implement making business. It was not, as is often stated, the date William Davis established his business. Philip Webley was apprenticed in 1827 to Benjamin Watson. James Webley also seems to have been apprenticed but to who is not known. In 1834 James and Philip established their partnership as percussioners, lock filers and gun makers at 7 Weaman Street,Birmingham which was William Davis' old premises Davis, a gun implement maker, mould and toolmaker, died in 1831 and his wife Sarah inherited the business at 84 Weaman Street which she ran with her daughter, Caroline. On 5 January 1838 Philip Webley married Caroline. Philip was recorded at 84 Weaman Street from 1838 as a gun percussioner, lock filer and gun maker and this is when the partnership was last recorded, but the brothers apparently continued to co-operate until 1845 when Philip reportedly sold his interest to James and used the money to purchase Sarah Davis' business. Even then, they worked together particularly about the design and manufacture of percussion revolvers. Philip Webley was recorded in the 1851 census as a 38-year-old gun and pistol implement manufacturer living at 84 Weaman Street with his wife Caroline they had four sons and one daughter Thomas William, Emma, and Philip Jnr, and two other sons, James, and Henry and Philip's cousin, also lived with the family probably as a nurse, Sarah Haywood. On 4 February 1853 Philip Webley registered patent No. 335 for a hinged revolver and on 14 September 1853 he registered patent No. 2127 for improvement for the first muzzle-loading percussion cap and ball revolver which became known as the "Longspur". In 1859 Philips son Thomas William, aged 21, was made a partner in the firm, which then changed its name to P Webley & Son and described itself as "Gun and Pistol Makers and Patent Revolving Pistol Makers", probably exploiting Philip Webley's patent No. 305 of February 1853 for a revolver frame and lock, and its improvement under patent No. 2127 of September 1853. Thomas later went on to managed the shotgun side of the business. From about 1863 up to the First World War, the firm made rook rifles for Holland & Holland. From the 1890s they supplied magazine rifles. In 1863 and 1864 the firm's address was given as 83-84 Weaman Street, but from late 1864 to 1875 their address was 84 Weaman Street. By 1874 the firm had a showroom in London at an unknown address. In 1875 the firm expanded into 82-84 and 88-89 Weaman Street. The shotgun is not in very good condition is unusable as a firearm and is not very significant historically or valuable, although made by a well known and respected manufacturer of firearms there are many better examples of shotguns made by P Webley and Son in collections and for sale. This particular example is of a standard pattern for utilitarian use of which many were made. Pin fire double barrel cartridge loading shotgun, the stock is of varnished walnut, the shotgun is in a wooden box, box has hinged lid and dovetail joints. Raised inscription on butt has an image of "dog carrying a bird in his mouth" and another image of a "anchor and chain". Inscribed to both sides of the locks "P Webley and Son", Maker's mark and proof marks for black powder shotguns on undersides of both barrels. Proof marks used are for Birmingham. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shotgun double barrel, double barrel, bird dog and bird, anchor and chain, webley & scott, pin fire, cartridge, philip webley

Sterling Circa 1768 Paul Revere Reproduction Bowl manufactured by Shreve Crump & Low Co. Currently there is no information about the 150th Field Artillery visit to Bendigo in 1942 although Defence manufacturing in Bendigo has a long history with Thales continuing to produce machinery and vehicles on the original site of the Ordnance Factory which began operating in 1943.Large engraved silver bowl. Presented to / The City of Bendigo / By the Officers and Men / of the / 150th Field Artillery Army of the United States / In Grateful Remembrance of the Warm Hospitality extended to them / By the Citizens of Bendigo / In February 1942 Underside; Shreve, Crump & Low and Co/ sterling / 809 by / P. Revere / Boston 1768 / Sons of Liberty / reproductioncity of bendigo commerce

Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top (broken). Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box, usually for a glass bottle but which is holding a metal pourer. The rest of the kit is missing.Printed in gold leaf on inside lid of box: MAYER & MELTZER / LONDON / MELBOURNE & CAPE TOWN Stamped on underside of metal pourer: BARTH & CO / LONDON Handwritten on inside of lifting linen-covered paper: [indecipherable] d as described on Pawn-Ticket / January 1903 / Jacket / Boots [cont...]mayer & meltzer, barth & co

Ornamental drop finials x 4 from the lighthouse staircase.The four cast iron drop finials are decorative architectural features that were appended to the underside of the original lighthouse staircase, which was built between 1861 and 1862.The Conservation Management Plan prepared by Australian Construction Services in 1992 states that the original stair ‘was probably the first cast iron spiral stair to be built in an Australian lighthouse.’ From about 1978 to 1988 the tower’s original staircase was gradually removed and replaced by an iron replica and by 1992 the dismantled staircase had been shifted to the old jetty storage building and was ‘awaiting disposal’. Fortunately, it was not trashed but accessioned into the Eden Killer Whale Museum where it has since been incorporated into a recreated lighthouse.The staircase was removed from the tower prior to the lightstation’s inclusion in the Victorian Heritage Register in November 1999 (H1773). which may be the earliest cast iron spiral stair built in an Australian lighthouse.The four baluster drop finials are of first level contributory significance to the Gabo Island Lightstation for their historic value and clear provenance to the tower’s original staircase erected in 1862, which may be the earliest cast iron spiral stair built in an Australian lighthouse.4 x Cylindrical shaped finials. Threaded inside. Cast iron. tapers to a point. 1. & 2. have residue paint.