Robin William Smallwood was Dean of the Faculty of Anaesthetists at the Royal Australasian College of Surgeons from 1986 - 1987. Smallwood died 6 October 1987 after a brief illness. Smallwood completed medicine at the University of Melbourne in 1958 and decided on anaesthesia as a career, attaining his FFARACS in 1964. The Orton Medal was awarded posthumously.Gold coloured oval shaped medal with the Faculty of Anaesthetists coat of arms on the obverse in relief. The owner's name has been engraved into the reverse. There is a thick, ribbed, navy blue ribbon connected to the medal by a circular ring at the top. The medal and ribbon are encased in a black velvet box with white satin lining on the inside of the lid and a red velvet cushion resting in the base.Engraved on reverse of medal: R.W. SMALLWOOD / 1986 - 1987

Three WW1 medals including 1914 Star awarded to Private Ernest LUCAS Royal Defence Corps who was first assigned to the Middlesex Regiment. LUCAS was discharged on 18/5/1919 having served 11 years and 305 days.The 6th Battalion Middlesex Regiment can trace its history back to 7 August 1760 as part of the Middlesex Militia. In 1778 it was titled the 1st East Middlesex Militia. By royal order the regiment was later designated the Royal East Middlesex Militia on 24 April 1804. By 1855 it was using the formal title of "1st or Royal East Middlesex Regiment of Militia". In 1900 the number of regular Middlesex Regiment battalions was doubled with the formation of a new the 3rd and 4th battalions; and the two militia battalions were renumbered as 5th and 6th battalions of the regiment. The unit's standing orders of 1863 record the regimental insignia as being somewhat unusual, in that it did not include standard royal crown, but featured a five-pointed Saxon Crown atop a shield with the arms of the East Saxon Kingdom i.e. three stylised Seaxes hilted and pommeledThree original WW1 medals with ribbons attached to white cardboard - round silver coloured metal medal with grey black white and orange striped ribbon - round gold coloured metal medal with purple blue green yellow and orange striped ribbon and bronze coloured star shaped metal medal with blue white and red striped ribbonPTE E LUCAS- Middlesex Regt.ernest lucas, middlesex regiment

Made by internee at Camp 3, TaturaHandmade wooden wall plaque with two 'pin' holes at top with length of cotton threaded through for hanging. Adhered to plaque : handcarved wooden horseshoe, painted blue. Shaped 'banner' above with 2 words written on it in German, translating as 'good luck'. A small red flower has been painted on the plaque between ends of horseshoe with green leavesWied Kplaque, bissinger g, wied k and n, camp3, tatura, ww2, camp 3, handcrafts, wood, carving

This black and white mage depicts large group of men dressed in military uniform of the Light Horse - with most wearing bandoliers and slouch hat, some with emu plumes. The 13th Light Horse Regiment was formed at Broadmeadows in Victoria in March 1915; it was the third light horse regiment to have been raised in that state. Its regimental number quickly led to it becoming known as the "Devil's Own" regiment. It left Australia on 28 May and disembarked in Egypt on 29 June 1915. In 1921, Australia's part-time military forces were re-organised to perpetuate the numerical designations of the AIF following its demobilisation. Through this process, the 13th Light Horse was re-raised as a Citizens Forces unit in Victoria, adopting the territorial designation of the "Gippsland Light Horse". In 1939, the regiment was amalgamated with the 19th Light Horse to become the 13th/19th Light Horse.In August 1940, during the opening stages of the Second World War, the 13th was re-formed in its own right. It was later mechanised and re-designated the "13th Motor Regiment". In May 1942, it was converted into an armoured regiment – designated as the "13th Armoured Regiment" – as part of the 2nd Armoured Division's 6th Armoured Brigade, which had been formed for defensive duties to guard against a possible invasion of mainland Australia. After moving to Puckapunyal in July, the regiment was equipped with M3 Grant tanks. Further training was undertaken in Murgon, Queensland, throughout 1943. By that time, manpower within the Army was scarce and as the threat of an invasion by the Japanese diminished during the year, so too did the need for large-scale armoured forces. A number of armoured units were subsequently disbanded as men and equipment were reallocated as the Army reorganised for jungle warfare. As a result, the 13th was disbanded in October 1943. In the post war period, the unit was perpetuated by the 8th/13th Victorian Mounted Rifles, which existed between 1948 and 1991–92. During WWI three light horse regiments were raised in Victoria for the AIF, the 4th ALH, the 8th ALH and the 13th ALH. These regiments served with distinction at Gallipoli, in the Middle East and on the Western Front.Wide and narrow rectangle shaped black painted frame with gold colour mount and four silver metal screws in each corner. The frame contains a black and white photograph depicting a large group of men dressed in military uniform with bandoliers and slouch hat, some with emu plumes. A small black strip of plastic is attached in the centre of lower edge.Front - 13th Light Horse Rear - 2nd Division Cavalry School Broadmeadows 20-09-1935victoria, 13th light horse

Straight jacket, sleeveless, made from two thicknesses of calico with red and blue stripe. Edges bound with bias-cut calico. Garment is shaped like waistcoat and wraps around with two long ties. The upper yoke is reinforced with a third layer of cloth cut from the selvedges. The ties are made from separate pieces and sewn on at the lower edge.Nonecostume, sunbury asylum, george evans collection

This object relates to Hugh Forrester BETHUNE. He was born on 15/11/1924 in Sydney, NSW. Hugh Forrester served in the RAAF (430155) enlisting on, 01/01/1943 in Unknown before being discharged from duties with the 9 AIRCREW HOLDING UNIT as a RAAF Non-Commissioned Warrant Officer (WOFF) on 26/02/1946. Hugh Forrester BETHUNE was not a prisoner of war. Hugh Bethune was awarded the 1939-1945 Star, Australia Service Medal 1939-1946, Defence Medal, France and Germany Star, War Medal 1939-1945.Diamond shaped medallion hangs at the end of a red, white, and blue coloured lanyard. The medallion has a smaller red diamond at the centre with the MCC logo (Melbourne Cricket Club). The perimeter of the bottom half of the medallion has writing on either side of a smaller blue diamond, which forms the bottom point of the medallion - "MELBOURNE" on the left side and "CRICKET CLUB" on the right.Front of medallion: "MELBOURNE CRICKET CLUB" Back of medallion: "PERFECTION BADGES" / "(03) 417 1220"souvenirs, ballarat rsl, ballarat

A Barker & Son 'The Invincible' tennis racquet with concave wedged throat and bevelled, oval head. Has cloth tape reinforcements around shoulders, and an octagonal handle with 'fishtail' shaped end. Model name imprinted across throat on obverse. Manufacturer's name printed across throat on reverse. Materials: Wood, Lacquer, Metal, Glue, Gut, Cloth tape, Inktennis

A ' Windsor' tennis racquet with bevelled oval head, concave wedge throat and red string whipping around shoulders. Fishtail shaped butt, handle has fine grooves and two large furrows. Model and manufacturer names imprinted and inked across throat on obverse. Strung with twine. Materials: Wood, Lacquer, Metal, Glue, Twine, Ink, String, Guttennis

Blue and white hexagonal shaped china jar with lid, various castles depicted around sides and on lid. Made by Maling Ware for Ringtons Tea Offices & warehouse Newcastle Upon Tyne illustrated on base. Inside lid North East Coast Industries Exhibition Newcastle On Tyne 1929 Reg No's 745884 745865 plus coat of arms.Maling Ware England reg No's 745864-5domestic equipment, food storage & preservation, tea caddy, dr 334.2

The table was used in the Charing Cross Infant Welfare Centre. The Maternal and Child Health Service (Infant Welfare) began in Victoria in 1917 when, in response to high levels of infant morbidity and mortality, the first voluntary Infant Welfare Centres began to emerge. The first centres were established in Richmond and Carlton and received a Council subsidy.A table with an open box fixed to the top it 100 centimetres long 55 centimetres wide with 14 centimetre sides. The table was used to measure the length of babies to record growth. One end is shaped the fit a baby's head when it is lying on the table, the other end slides to the baby's feet. There is a 90 centimetre measuring tape fixed on to the table top.charing cross infant welfare, infant measuring table

Dark copper, possibly lacquered, jug with lid and handle but no spout. Body has horizontal bead around centre and two vertical beads. Globular shaped body with cylindrical neck. Lid is domed and internally fitted with a small arched handle on top. Rounded pouring handle which has been reinforced, on side of the jug connected to the body and neck."Q" imprinted on handled.containers, domestic, container, jug, kitchen, oil?

A music box table with a decorative hinged lid of dark brown, light brown, yellow and green inlaid timber in a pattern of nine squares and rectangles on the top of the lid. Inside is plain wood with a recessed open box cavity. Around the edges of the table under the lid on the outside there is a green and yellow patterned inlay. It has four finely shaped wooden legs."Hand work Made In Italy"music boxes, tables

A gold plated tie clip with a flat rectangular base with a small floral swirl at the end. The top has a shaped curved clip that opens on the right by pressing the round patterned end. On the pointy section on top there is engraved - 12K GF with a bishop's mitre shape above with a long S shape inside. The clip is quite strong. It rests on cotton wool.12K GF with a bishop's mitre shape above with a long S shape inside. tiepins, jewellery, pins

Possibly used to hold spare mechanical partsSmall rectangular shaped wooden box, unpainted, broken straps, maybe previously attached to a lid, solid wood on all sides, double base, inscription written on inside of box. Bolts: 6, double washer: 1, washers: 20, bolts: 7, shoulder flat cylinder:1, stake: 1, scrap metal: 7, screws: 2.Yes

These hames are part of the harness used by the family of Michael Conway who established a dairy farm of 35 acres in Wodonga in 1940. He and his wife Catherine nee Carroll settled there and raised 5 children. Before coming to Wodonga Michael carried on a bakery business at Urana. The hames were part of the harness attached to the horse which pulled his bakery cart. In Wodonga Michael Conway built a 2 bail dairy and milked up to 20 cows, separated the cream from the milk by hand and sold it to the local butter factory of Holdensen and Nielsen. In later years only whole milk was sold. The farm was on the outskirts of East Wodonga. Michael Conway died on 6th January 1945. The farm was later sold for residential and industrial development and includes Conway Court.This item has a clear connection to the family of Michael Conway of Wodonga, Victoria2 metal sections shaped to fit around the exterior of a horse collar. They are joined at the lower end by a chain and upper end by a leather strap. Approximately halfway up each section a hinged hook is located to which chains are hooked and attached to the cart. Towards the upper end is attached a ring through which reins pass before being connected to the bit.michael conway wodonga, horse harnesses, dairy industry wodonga

FLETCHER RUSSELL & CO. LTD/ WARRINGTON MANCHESTER & LONDON Thomas Fletcher (1840-1903) had established a gas appliance manufactory in Thynne Street, Warrington by the 1880s. By 1895 the company had become Fletcher Russell and Co Gas Engineers, his firm having merged with Alexander and William Russell of Pendleton Iron Works. In 1950, the firm merged into Radiation Ltd which was later acquired by 'TI New World. In the early 1880s Thomas Fletcher was a registered dentist who went on to found a dental apparatus manufacturing business. He later diversified into producing equipment for blacksmiths, foundries, forging and other sectors. The company had grown to 900 employees in 1914. These foot-operated bellows were for pumping gas to keep the patient relaxed while the dentist worked on their teeth. They were later modified for a variety of uses where a continual flow of air was needed.These bellows are representative of a range of devices developed in the late 19th Century to assist in manufacturing. They were donated to our collection by a Wodonga resident.A set of foot bellows made from timber, metal and leather. The bellows were activated by pressing up and down on the metal step-shaped lever at the front. The air outlet on one side would have a hose attached to it to direct the air current to wherever it was needed. The bellows are made from leather. The manufacturers mark is attached to the top within a metal circle.On top of Bellows in a circle: "FLETCHER RUSSELL & CO./ WARRINGTON/ MANCHESTER / LONDON"foot bellows, fletcher russell & co. ltd.

This unusual jewellery set belonged to the family of Mrs. Jean Raper of Wodonga. It is part of an extensive collection of jewellery items which belonged to her mother and grandmother.This item is from the Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper.A long strand of black beads with embedded opal chips of varied sizes. The front central bead is teardrop shaped and surrounded by 4 large round beads. Beads are strung on a strong dark thread with a plastic screw clasp. The set includes a matching brooch consisting of 3 medium sized and 4 smaller beads attached to a faun gold bar.fashion accessory, women's jewellery

Brenda Crute married Jim Bywaters 19671967 A delightful bridal gown fashioned in chantilly lace cur on empire lines, fitted sleeveless bodice with boat shaped neckline back and front. Sheath skirt. Chapel length nylon organza coat train with butterfly sleeves & edging of chantilly lace. Headdress - Pearlized orange blossom & leaves mounted to a three-tiered nylon tulle veil.wedding dress, brenda crute, jim bywaters, 1967, textiles - bridal - fashion, stawell - wedding

Viola Annie McVicars (1911–1990) was born in Korumburra on 29 April 1911. At the age of 21, she married William John Ayling (1909–1995). After their marriage in 1932, they moved to Kew, initially to 81 Tennyson Street, and later to 180 Pakington Street. A professional tailoress, Viola Ayling was also a talented amateur potter, creating her ceramics at her home in Pakington Street, where she had an internal studio and a handmade, wood-fired brick kiln in her backyard. Following her death in 1990, her studio pottery passed to her daughter, and following the daughter’s death, to her granddaughter. This piece of glazed earthenware is part of a collection of 15 functional and decorative ceramic items donated by Viola’s granddaughter to the collection in 2024.A handmade dish, expertly potted and glazed. The style is representative of Australian ceramic design of the period, particularly that employed by Klytie Pate.Hand thrown earthenware dish, covered with a chocolate brown glaze into which a design on the cavetto and well has been incised. The cavetto has a design of four groups of joined semicircles filled with horizontal and vertical lines. The well includes an abstract representation of a flower. The signed, finely shaped foot and rim are glazed in cream with the artist's signature incised on the base. Signature to base: "V. Ayling"ceramics, pakington street -- kew (vic.), dishes, viola annie ayling, viola annie mcvicars

The flag of Sardinia was adopted as the official flag of the newly formed Kingdom of Italy in 1861. The flag incorporates the armorial bearings of the Royal House of Savoy, the family who ruled Italy until it voted to become a republic in 1948. Civil flag of the Kingdom of Italy featuring three vertical panels of green (hoist) white and red cotton, sewn together. Sewn into each side of the centre (white) panel is a representation of the coat of arms of the House of Savoy - a blue-bordered red square, quartered by a white cross. This flag would later become the flag of the Kingdom of Italy, and the tricolor without the Savoyard escutcheon remains the flag of Italy. The exact date of the creation of this flag is uncertain, however as it was in use in Italy until the formal establishment of the Italian Republic, it may have been made between 1848 and 1946. This particular flag was brought back at the conclusion of WWII and donated to the Terang RSL Sub-branch.The Civil flag of the Kingdom of Italy is comprised of a red, white and green vertical cotton panels, which have been stitched together by cotton. Each panel is approximately 915 cm wide by 1.610 metres high. The centre panel has an appliquéd Savoy shield, with a centred white cross on red background, surrounded by a blue shield shaped border.

This weight was worn by a marine diver to help him or her counteract the weight of their diving clothing and equipment and to ascend and descend in the water. The leather straps were threaded through the slots and bars on the weight and the leather panel was worn between the weight and the diver for padding and protection.This marine diver's weight is an example of weights used in the 20th century.A heavy thick metal disc designed as a marine diver's weight. Disc has a horizontal bar inserted into the upper part of the disc and an elongated slot on each side for threading and securing a strap. One leather strap is fitted, the other three straps and a shaped leather rectangular panel are also part of this item but are stored separately. The disc has an inscription.Moulded into weight "BACK"flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, marine diving, underwater diving, deep sea diving, diving equipment, diving accessory, diver's weight, metal weight, diving weight

Manufactured by the Adelaide tramcar body builder, Duncan and Fraser to indicate or advise passengers who built the tram. Were generally located above a doorway of the tramcars.Demonstrates the method of recording who built the tramcar body Oval shaped enamelled steel plate with the words "DUNCAN & FRASER LTD BUILDERS ADELAIDE" in black on a white background within two ovals and other markings. Has two 3mm diameter holes on long ends by the letter D and letter L. Two copies held. Copy two has two brass round head slotted screws in the packet.builders plate, duncan & fraser, adelaide, tramcar, workshops

A Mason jar is a moulded glass jar used in canning to preserve food. The mouth of the jar has screw threads on its outer perimeter to accept a metal ring (or "band"). The band, when screwed down, presses a separate stamped steel disc-shaped lid against the rim of the jar. An integral rubber ring on the underside of the lid creates a hermetic seal to the jar. The bands and lids usually come with new jars, and bands and lids are also sold separately; while the bands are reusable, the lids are intended for single use when canning.The Mason jar was invented and patented in November1858 by Philadelphia tinsmith John Landis Mason. The same design was used on the jars well into the 1900'sThe early settlers of Moorabbin Shire had to be self sufficient and grew their own fruit and vegetables even if not market gardeners They preserved their produce for use all year. A clear, glass jar with a metal screw top lid used for preserving food c1900. This jar has a 'keystone' symbol. 'keystone' symbol / MASON'S / PATENT / NOV 30TH / 1858 base 67. PAT NOV 96early settlers, market gardeners, mason's jar, mason john landis, food preservation, moorabbin, bentleigh, cheltenham

The iconic bush surrounds of Lake Daylesford are now home to a new permanent artwork titled Cottage, by artist Jason Waterhouse. The artwork has been months in the making, thousands of S-shaped pieces have been hand crafted from three kilometres of wrought iron, then joined together to form a scaled-down miners cottage. ‘Cottage’ is a highly decorative wrought iron sculpture inspired by the gates at the Convent in Daylesford, “ said Waterhouse. “This work references the rich opulence of the Victorian gold rush and pre-war spa resort era in its patterning. In its form ‘cottage’ pays homage to the miners, workers and farmers on whose backs the riches of Daylesford were built.” Cottage is the first in a series of significant public artworks to be commissioned by Hepburn Shire Council. Cottage will enhance one of Victoria’s premier tourist destinations, Lake Daylesford. Large scale wrought iron public sculpture referencing the worker's cottage of the Goldrush period in Daylesford. 203cm (height) x 382cm (width) x 353cm (depth) verandah 159.5cm (height) wrought iron 32mm x 2.5mmpublic art, sculpture, jason waterhouse, stockroom, daylesford, hepburn shire, daylesford lake, cottage, site-specific art, art, wrought iron, hepburn, hepburn shire public art collection

The two cards of nibs are retail display cards of the dip pen nibs that William Mitchell Calligraphy produced, dating back to around the 1920’s, which was the time of the Great Exhibition in the UK. At that time dip pens with steel nibs were the main writing instruments. British Pens Ltd. had recently formed as a company and its subsidiaries included the the company William Mitchell, which is why British Pens Ltd. is named on the cards as well. One card (1) has the Round Hand nib, which is widely used today for calligraphy scripts. The other card (2) has the Script nib that has round upturned points for monocline or unshaded lettering that is also used for calligraphy. The nibs also have a detachable reservoir. The pen nibs are shaped to fit into a slot in the base of a wooden or Bakelite pen holder. The hole at the front of the nib is for collecting ink from a well, which is then stored in a reservoir at the back of the nib. The nibsare stamped with their nib size and Pedigree (what type of nib it is) and maker’s details. William Mitchell Calligraphy still makes these nibs today with a slightly difference finish. (ref: Sales and Marketing Director of William Mitchell Calligraphy in 2016). HISTORY of the Ink Pen Quills and ink were common writing tools until the early 19th century when the pen trade began mass producing steel nibs and pens. The steel nibs each have a hole in the middle that acts like a well for the ink. When the nib is dipped into the ink well the writer needs to ensure that it is dipped to only just past that well. India Ink was one of the most popular inks used with the nib pens, notable for its satin-like smooth flow. This ink is composed of a particularly fine carbon mixed with water; it can also be obtained as a dry stick that is then crushed and mixed with water as required. The Jewellery Quarter of Birmingham had the largest concentration of independent jewellers in Europe. Birmingham became the centre of the world’s pen trade for many years -, during the 1800’s over 100 factories, employing 1000s of skilled workers, manufactured the ‘Birmingham Pen’. ABOUT WILLIAM MITCHELL CALLIGRAPHY LTD.* (*The following text is quoted from the William Mitchell Calligraphy website) British based William Mitchell Calligraphy has been designing and manufacturing exceptional pens for almost 200 years. The William Mitchell heritage in making pen nibs began whilst working with his brother John Mitchell in the early 1820s. William Mitchell established his own business in 1825 to become one of the leading nib manufacturers and famous for lettering pens. Almost 100 years later William Mitchell merged with Hinks, Wells & Co, another pen manufacturer, to form British Pens, employing around 1000 people in the Bearwood Road area of Birmingham. During the early 1960s British Pens acquired the pen business of other pen manufacturers Perry & Co and John Mitchell, once again reuniting the two brothers. Joseph Gillott, who were famous for their artist drawing and mapping nibs, amalgamated with British pens in 1969. William Mitchell and Joseph Gillott established in Birmingham during the early part of the nineteenth century and [their products] are still proudly made here. British Pens were subsequently purchased by its current owner Byron Head, the owner of William Mitchell (Sinkers) in 1982, and was subsequently renamed William Mitchell (calligraphy) Ltd. Established in 1827 Joseph Gillott was one of the pioneers of mass steel pen nib manufacturing. The company was particularly strong in the American market, prompting Elihu Burrit, the American consul, to write “In ten thousand school houses across the American continent between two oceans, a million children are as familiarly acquainted with Joseph Gillott as with Noah Webster” (The compiler of the famous American dictionary). The company consequently received visits from many notable Americans, including president Ulysses S Grant. The early 19th century invention and mass production of pen nibs such these in our collection had a large impact on education and literacy because the nibs could be produced in great numbers and affordable prices.Pen nibs; 2 cards of steel dip pen nibs from the 1920’s. The steel nibs are attached to cards by 2 rows of entwined cotton cord. Reverse sides of cards have some hand written marks. Manufacturer; William Mitchell, Birmingham, England. Card issued by British Pens Ltd. Nibs have shaped ends, a hole in the centre with a well on the underside, and the tops are shaped approximately quarter circle. Inscriptions are pressed into each nib. The script pens have detachable reservoirs made of a metal different to the nib. (Card 1) Round Hand Pens, 11 nibs remain from card of 12. Printed on card “Round Hand Pens for Beautiful Writing, Twelve degrees of point, Square points. William Mitchell, Birmingham, England. This card is issued by British Pens Ltd. MADE IN ENGLAND” Also printed on top left of card is a pen drawing of a person writing at a desk, background of decorative 3-paned window in brick wall. (Card 2) Script Pens; 11 nibs remain from card of 12. “Script pens fitted with detachable reservoir. William Mitchell, Birmingham, England. This card is issued by British Pens Ltd. MADE IN ENGLAND” Also printed on top right of card is a pen drawing of a person writing at a desk, background of decorative 3-paned window in brick wall. On Card 1, - each nib is stamped with its size, and “Wm MITCHELLS / PEDIGREE / ROUND HAND / ENGLAND” - hand written on front bottom of card in ball point pen “Lettering 5 times size of nib” - hand drawn on back of card in red and blue ball point pen are scribbled lines On Card 2 - each nib is stamped with its size, and “WILLIAM / MITCHELLS / SCRIPT PEN / ENGLAND” - a black circle corresponding to the nib is printed on the card above each nib. - hand written on back of card in black felt tip pen are numerals - hand drawn on back, 4 parallel lines in red ball point pen with the numbers “10” between 2 of the lines flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, william mitchell calligraphy ltd, british pens ltd., pen nib, writing implement, dip pen, round hand nib, script nib, birmingham manufacturer, communication in writing, mass produced pen nibs

Black long-sleeved ladies’ silk blouse. High round neckline at front with V shaped lace insert from throat to bust line. Stand up lace and net collar. Top edge of collar is trimmed with pink ribbon piping and gathered cream coloured lace. There are three strips of brown tape attached vertically to the collar at each shoulder and front RHS of collar to hold plastic strips to support the collar in upright position. One piece of plastic still in place. On either side of centre front are vertical panels of pintucks with knife pleats on either side facing inwards. There are three small pink decorative buttons (1 cm) below the throat and another group of three buttons 10 cm below the first group. The top has a back opening fastened with 10 press studs. The back has two vertical panels of pintucks and knife pleats. The long sleeves have cuffs at the wrist (5 cm) with U-shaped split on upper side. Each cuff has three decorative pink buttons on one side of the U-shaped split. The lower edge of each cuff is trimmed with black lace (5 - 6 cm) that falls over the wrist. Machine stitched.costume, female evening, black silk top

Lightweight knee length linen coat with long sleeves. The coat is single breasted with a V neckline with a fold over collar of black linen fabric. There are two rows of black cotton piping on the edges of the collar. The front is made up of four pieces. The two centre panels are shaped at the bust line. The two side panels are narrow at the shoulders and flare slightly from the hip line to the hem line. There is a decorative line of stitching on the front seams. The front of the coat is fastened with three black buttons (2 cm) and button holes. The back of the coat is made up of three pieces. The centre panel is shaped in at the waistline. The two side panels are narrow at the shoulders and flare slightly from hip line to hemline. The two back seams each have three decorative black buttons (2 cm) vertically between bust line and waist. There is a decorative line of stitching on the back seams. The coat has long set in sleeves shaped at the elbow and with black linen cuffs (10 cm). There are two rows of black cotton piping on the top edge of each cuff and one row of black cotton piping on the lower edge of each cuff. There is a 14 cm cotton tape hanging tag stitched inside the coat just below the collar on the back. Machine stitched.costume, female daywear, linen coat

This collection of glasses and cases was donated by Miss Connie Cruickshank. She was part of the family of Orbost's first doctor, Dr James Kerr. As the 19th Century came to a close, more and more people wore their eyeglasses everyday. A popular style of inexpensive, everyday spectacles was the pince-nez. French for "pinch nose," the pince-nez was first developed in France circa 1840 and began to be imported after the 1850s. Pince-nez have no temples, but are fit snugly on the bridge of the nose. Pince- nez could be uncomfortable to wear and broke often from falling off the nose. These items demonstrate how glasses' styles have changed over time. One pair of pince-nez glasses and its brown leather case shaped to fit. One solid black wooden case with a small hinged door at one end. One blue/black case with the words A A Abotomey 14 Carpenter Street Middle Brighton in gold lettering. Five pairs of spectacles, one with blue coloured glass with crack in one lens.A A Abotomey 14 Carpenter Street, Middle Brightonspectacles spectacles-cases pinz-nez

The Weasel is the smallest carnivorous mammal in the world. They commonly reside in central and western Europe and in the Mediterranean region. They can also be found in North Africa, Asia and North America. This species was also later introduced to New Zealand. The Weasel prefers to live in locations which include grasslands, sand dunes, lowland forests, upland moors and towns which have a suitable food source. Collective nouns for a group of Weasels include a "sneak", a "boogie", a "gang" or a "confusion". This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.A light coloured weasel standing on a wooden platform. Two identification tags are tied to one of the specimen's back legs. The animal has a long and slim body with a small and triangular shaped head. The teeth are visible from close-up and the eyes have been replaced by dark coloured glass. The snout is pointed and the weasel has long whiskers. The ears are small and rounded.A.4491 ?. Weasel sp. / Catalogue, page, 48 /taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, squirrel