Showing 6993 items
matching leather
-
Mont De Lancey
Hat Box
Round Brown leather hat box with metal locks and brown satin lining. Contains 4 hats - #'s 299, 356, 611 and 1368."Antler"hatboxes, clothing storage containers -
City of Kingston
Book - Minute book
The Sons of Temperance was founded in New York in 1842 and brought to New South Wales by the Baptist minister, Dr William Hobbs, a short time later. Division, or local branches, grew quickly so that in October 1864, a provisional Grand Division was formed with a commitment to spread the word on temperance throughout the country, and the advantages gained by joining a temperance benefit society. It was reported that by 1869, in New South Wales, there was a National Division, two Grand Divisions, and one hundred and seven Divisions, with a total membership of 5970. In 1868, members of the Church of Christ, Cheltenham, initiated a meeting to form a Division of the Sons of Temperance, which was subsequently called Star of Moorabbin Division, No 29. The meeting was held at the Cheltenham Temperance Hall on 30 September, with office bearers appointed and the larger membership acknowledged.The book contains the minutes, including naming office bearers, for the first meeting of the Sons of Temperance, Star of Moorabbin Division, which occurred on 30 September 1868. Minutes continue to be recorded in this volume until October 1873. Several pages at the rear of the book have been used to maintain a list or 'roll' of membership.Hard covered book, lined in green fabric with red leather corners and spine used as a minute book for the Sons of Temperance, Star of Moorabbin Division.temperance, friendly societies, cheltenham -
City of Kingston
Book - Minute book
The Sons of Temperance was founded in New York in 1842 and brought to New South Wales by the Baptist minister, Dr William Hobbs, a short time later. Division, or local branches, grew quickly so that in October 1864, a provisional Grand Division was formed with a commitment to spread the word on temperance throughout the country, and the advantages gained by joining a temperance benefit society. It was reported that by 1869, in New South Wales, there was a National Division, two Grand Divisions, and one hundred and seven Divisions, with a total membership of 5970. In 1868, members of the Church of Christ, Cheltenham, initiated a meeting to form a Division of the Sons of Temperance, which was subsequently called Star of Moorabbin Division, No 29. The meeting was held at the Cheltenham Temperance Hall on 30 September, with office bearers appointed and the larger membership acknowledged.The book contains the minutes for the meetings of the Sons of Temperance, Star of Moorabbin Division, from 6 July 1882 to 6 July 1903. Hard covered book, lined in blue fabric with red leather corners and spine used as a minute book for the Sons of Temperance, Star of Moorabbin Division.temperance, cheltenham, friendly societies -
City of Kingston
Book - Minute book
The Sons of Temperance was founded in New York in 1842 and brought to New South Wales by the Baptist minister, Dr William Hobbs, a short time later. Division, or local branches, grew quickly so that in October 1864, a provisional Grand Division was formed with a commitment to spread the word on temperance throughout the country, and the advantages gained by joining a temperance benefit society. It was reported that by 1869, in New South Wales, there was a National Division, two Grand Divisions, and one hundred and seven Divisions, with a total membership of 5970. In 1868, members of the Church of Christ, Cheltenham, initiated a meeting to form a Division of the Sons of Temperance, which was subsequently called Star of Moorabbin Division, No 29. The meeting was held at the Cheltenham Temperance Hall on 30 September, with office bearers appointed and the larger membership acknowledged.The book contains the minutes for the meetings of the Sons of Temperance, Star of Moorabbin Division, from 20 August 1903 to11 October 1917.Hard covered book, lined in green fabric with red leather corners and spine used as a minute book for the Sons of Temperance, Star of Moorabbin Division.temperance, friendly societies, cheltenham -
Federation University Historical Collection
Equipment - Camera, Thornton-Pickard, Thornton Pickard Triple Imperial Extension Camera, c1901
Thornton-Pickard was a famous British camera manufacturer established in 1888. The company was based in Altrincham, near Manchester, and was an early pioneer in the development of the camera industry.Thornton Pickard Triple Imperial Extension half plate camera nos 529946 and 529947. The camera has leather bellows, and was originally mounted on a tripod.camera, extension camera, photographic equipment -
Bendigo Military Museum
Photograph - PHOTOGRAPH WW11, c.1920-40
Written in ink on white section - Laurance Gilligan 1923 with arrow pointing to James ?? (Huntly) possible 1939-40 Maribyrnong.Panorama, sepia photograph showing 4 rows of soldiers with bandoliers & leather leggings. The photograph is stuck to a piece of brown cardboard then to a piece of white cardboard.photography-photograph, military history - army -
Bendigo Military Museum
Equipment - GAITER, Unknown
British pattern webbing gaiter, left only. Khaki in colour, 2 side adjustments leather straps. brass buckle and brass ends on straps.“N. CUST, RAF, 1940. T. CHENETTY” (crossed out) ^.passchendaele barracks trust, equipment, gaiter -
Whitehorse Historical Society Inc.
Functional object - Letter Holder
Circular letter holder on stand. Green leather ' leaves' in circle to hold letters. Alphabet letters on leaves. Leaves pull out with ruled lines.domestic items, writing equipment -
Bendigo Military Museum
Uniform - BELT - SAM BROWNE, Unknown
Issued to "WO1 D. Fields"Brown leather Sam Browne belt with shoulder strap. the belt has a brass buckle and a number of brass ring attachment points for additional fittings.passchendaele barracks trust, sam browne belt, army, wo1 d fields -
Flagstaff Hill Maritime Museum and Village
Accessory - Purse, c. 1855
This small purse belonged to David and Alice Ellis, a young couple married in Dublin in 1855. It has been handed down in the Ellis family until it was donated, together with other personal effects, in 2004 by David and Alice’s granddaughter, daughter of David Ellis Junior. On 6th October 1855 newlyweds David and Alice Ellis set sail for Australia in the brand new Schomberg, considered the most perfect clipper ship. She was built as an emigrant ship in Aberdeen and set sail from Liverpool on her maiden voyage, bound for Melbourne, Australia. She was loaded with 430 passengers plus cargo that included iron rails and equipment intended for building the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. On 27th December 1855, only one day from her Melbourne destination, the Schomberg was grounded on a sand-spit on the Victorian coast near Peterborough. The passengers and crew were all safely rescued by a passing small steamer, the SS Queen, which traded between Melbourne and Warrnambool, and taken to Melbourne. The passengers had been told, when leaving the sinking Schomberg, that all they could take with them was a small basket or handbag. A newspaper article later mentioned that one of the things Alice made space for in her basket was her Bible. (It is unclear whether Alice took any possessions with her onto the SS Queen, but a note accompanying the donation of the Bible and basket states that the items were “left on deck and salvaged as Schomberg went down”.) Another steamer was despatched from Melbourne to retrieve the passengers’ luggage from the Schomberg and Alice was reunited with all of her boxes of belongings. Other steamers helped unload the cargo until the change in weather made it too difficult. Although the Schomberg was wrecked there were no lives lost. At that time David was 23 years old (born in Wales, 1832) and his new bride Alice was 26 (born in Dublin, 1829). They had been given letters of introduction to people in Tasmania so they travelled there from Melbourne. However the couple only stayed on that island for about a year before they returned to the Western District of Victoria. David worked for Mr Neil Black as a gardener for a while then, when the land in the area was made available by the Victorian government, David and Alice claimed a selection of land on Noorat Road in the Terang district. They settled there for the remainder of their lives, expanding their property “Allambah” as opportunities arose. A document accompanying the donation lists the names of six children; William, Grace (c. 1859-1946), Thomas (c. 1866 – 1939), David (c. 1962 – 1953), James and Victor. David died on 13th April 1911, aged 79, at their property. Alice passed away the following year, November 1912, aged 83. Alice’s obituary described her as “a very homely, kindly-natured woman, who was highly esteemed by a large circle of friends; and she was also a firm adherent of the Presbyterian Church”. At the time of Alice’s death she left behind three sons and one daughter. Her daughter Grace Ellis was also a very active member of the Terang Presbyterian Church and a member of the PWMU (Presbyterian Women’s Missionary Union). She was also involved in the Red Cross and other charities. Grace passed away in 1946, aged 87. David and Alice Ellis were amongst the very earlies pioneers of the Terang district of Western Victoria. Their donated possessions are a sample of the personal effects of emigrants to Australia. The donated items are a sample of the personal goods carried aboard a significant migrant ship in 1855. They are also significant for their association with the Schomberg. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck, The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Purse, leather, rectangular shape with metal frame and catch. Purse was amongst the possessions of David and Alice Ellis, passengers on the Schomberg when wrecked in 1855.schomberg, shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwrecked artefact, warrnambool, shipwreck, purse, leather purse, personal effects, 1855 shipwreck, peterborough shipwreck, ss queen, david ellis, alice ellis, allambah terang, dublin emigrants, terang presbyterian church, western district victoria -
Bendigo Military Museum
Equipment - SHAVING MIRROR & WALLET, 1939-40
Wallet & mirror belonged to Colin ODLUM VX45898 2/23rd Batt AIF. KIA 12.7.42. Refer 127.56, 135.2, 136.2P, 137.3P. .1) Brown leather wallet, folds in half, stitched all round. .2) Shaving mirror, polished stainless steel with small slot for hanging..1) Wallet has "C Odlum 2nd AIF" scratched on inside. .2) Shaving mirror has "C Odlum" scratched on one side.personal effects, grooming, toilet requisites, shaving, money containers, metalcraft, leatherwork -
Bendigo Military Museum
Equipment - PISTOL HOLDER WITH STRAP, M.H. and CO, 1943
Brown leather revolver holder, with attached lather shoulder strap. There is a flap that holds in pistol, by using a 25mm small strap onto a brass lug.Written inside the holster are three words - “Sgt XX Dan ELLERTON”ww2, pistol, accessory, passchendaele barracks trust -
Melbourne Tram Museum
Book, Abstract from Agreement between AETA & MTOCo, 1912
Contains a copy of the agreement dated 23-8-1912 between the Australian Tramway Employees Association with the Melbourne Tramway & Omnibus Company Limited, and a supplemental agreement dated 12-8-1913. See item 6340 for a digital copy and its historical significance in detail. Additional fold-out sheets have been inserted to detail the changes made to the agreement over time. Each section has been cut and pasted into the book with handwritten notes and names in some places.Yields information about the first agreement between the Melbourne cable tram operator and the Union that represented the workers.Book - leather bound, with end papers and tabbed for A to Z, containing the agreement between the MTOCo and the AETA of 1912 and hand written notes for each clause.On top and bottom edges in ink "Old 10/8/12"tramways, trams, unions, atea, cable tramways, mtoco, employment conditions, agreements, cable trams, disputes, discipline -
Frankston RSL Sub Branch
Binoculars
Binoculars (or field glasses) used by the Japanese Army during World War 2. Prismatic binocular design with a magnification of 6 x 24degrees. Each eye piece is rotated for fine adjustment of focal length. The tubular optics have a swivel action to adjust for eye width. Manufactured from brass with leathered grips and loops for attaching a carrying strap (included). Finished with a gloss black paint. These binoculars are complete with a brown leather carrying case which has a strap attached for carrying and a belt loop at the rear. Japanese Kanji characters and the chrysanthemum symbol are stamped on the top of the leather case.The binocular body is stamped with the following "MUSASHINO" "TOKYO" "BRIGHTSUN" "6 x 24" "No 8540" -
Tennis Australia
Racquet, Circa 1988
A Slazenger 'Phantom Silver' tennis racquet with open throat, plastic butt cap and handle wrapped with leather. Clear plastic shop wrap still on handle. Manufacturer name along side of right throat pillar and printed as pattern on leather handle wrap. Model name printed along right throat pillar. Adhesive label inside throat states: 'MARSHALL INDUSTRIAL CORP./ITEM NO. SCT-639'. Plastic butt cap features manufacturers name and cat logo. Cat logo also sprayed onto net. Materials: Adhesive tape, Plastic, Leather, Ink, Vinyl, Graphitetennis -
Tennis Australia
Racquet, Circa 1934
A Wright & Ditson 'All American' model tennis racquet. String whipping and paint around shoulders and around base of throat. On both sides of racquet, model name and manufactuer name printed across throat. Name of manufacturer and words: 'CHAMPIONSHIP QUALITY' printed on shaft on obverse and reverse. Handle spiral-wrapped withperforated pattern leather hand grip. Leather end wrap held with tacks. Butt cloth with amnufacturer's initials as a logo printed on it. 'PATENT NO 1664466' printed on side of shaft. Materials: Wood, Metal, Lacquer, Glue, Ink, Leather, Nylon, String, Plastic, Cloth, Painttennis -
City of Greater Bendigo - Civic Collection
Uniform - Telegram Satchel
Electrical telegraphs were point to point text messaging systems primarily used from the 1840's until the late 20th century. It was the first electrical telecommunications system and were sent by an operator or telegrapher using Morse code. Social telegrams were also encouraged and special pictorial forms and envelopes were designed such as the special purple form and envelope which was used when conveying condolence details during World War 2.(fn. Powerhouse https://collection.powerhouse.com.au/object/163103). There was a brief resurgence in telegraphy during World War I but the decline continued as the world entered the Great Depression years of the 1930s. Although telegraph lines continued to play an important part in distributing news feeds from news agencies post World War 2, the rise of the internet in the 1990s and the widespread installation of the telephones in homes saw the need for telegrams to greatly decline. When the Commonwealth Post and Telegraph Act was passed in June 1902, and a national Postmaster General's Department (the PMG) was established the responsibility for the nation's mail and telephone services fell on Post Offices. The Bendigo Post Office, built in 1887 and situated on Pall Mall was the central distribution centre for receiving and delivering telegrams and continued to deliver communication and postal services until 1997. Now a Visitor Centre, dedicated volunteers at the Post Office continued to demonstrate and educate the public about telegraphic services and the development of this unique form of communication up until 2019 when Covid 19 disrupted every day life, coupled with the death Ted Rankins (the last Post Master and a long term telegraph volunteer at the Post Office). This satchel was used by Junior Postal Workers in Bendigo to carry telegrams which were delivered by bicycle in the early years. Small, rectangle, leather satchel with attached shoulder strap and buckle. Satchel is made of five pieces of leather: two side pieces, one piece which is folded to create the front, bottom, back and flap and two small pieces to hold strap ring. The flap has a single hole through which a metal toggle is inserted to secure the flap closed. Satchel has four metal tabs to secure the top front to the top sides and an internal pocket on inside. The leather strap is attached to the top of the side seams of the satchel with circular metal rings and two metal press studs. Inside flap: Sticker with '540B'bendigo post office, bendigo tourism, city of greater bendigo tourism, making a nation exhibition, post office collection -
Beechworth RSL Sub-Branch
Belt
This belt was manufactured for military service. It is presumably a World War Two era article of Army uniform.This Army belt was presumably made and used during the World War Two era and therefore has historic value. Brown leather belt with a brass buckle. The belt has twelve holes in two rows at one end for fastening into the buckle. The very tip narrows to a point. There is light brown stitching along the edges of the belt. There are two brass studs which hold the leather in a loop of the other end. There is an additional piece of leather fixed to this looped edge for holding the other end in place. The buckle is made of a silver coloured brass and has two rods which pass through two of the twelve holes for fastening. The buckle also exhibits blue/green copper corrosion in several areas. belt, war, uniform, army, royal australian army, world war two, ww2, wwii, second world war -
Bendigo Historical Society Inc.
Document - ABBOTT COLLECTION: REVISED LIST OF PRICES, 1888
Established in London in 1760 as flax dressers and producers of thread for shoemakers, the business was founded by Francis Ullathorne and continued by four of his sons. Eventually they had agencies in Paris, London and Melbourne. They imported all manner of leather goods and tannery supplies by 1866. By 1901 the Melbourne company was named Ullathorne and Hartridge.48 Paper pages with cover missing. Revised List of Prices of goods in Ullathorne & Co's Illustrated Catalogue of Shoemakers' Curriers', Tanners' and Sadlers' Tools and Materials. London 1888 Printed by McCorquodale and Co. 'Armoury' Southwark. -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
WW11 1939-1945 Australian Army Soldiers Sewing Kit, c1939
1939 - 1945 Australian Army Sewing Kit. This kit is just one of many different brands of sewing kit - issued to Australian troops during the Second World War. Containing the standard requirements for uniform/clothing repair in the field. Items include:- assorted sewing needles,spare metal (quad hole) buttons and spare cotton/wool thread. Originally the "hold-all" (or pouch) was manufactured using leather, which was in plentiful supply in Australia and is quite durable. The major problem with leather however, especially in tropical or damp conditions - is it's susceptibility to moisture. This will then have an adverse affect upon the metal items contained within the kit, obviously resulting in corrosion to the metal sewing needles and buttons. This sewing kit hold-alls was manufactured from a khaki cotton or similar material. The metal thimble is missing.Standard issue sewing kit for Australian Soldiers serving in WW2 1939-45 in New Guinea and tropical areasA rectangular khaki cotton pouch containing wool and cotton threads, needles, metal buttons, folding stainless steel scissors that rolls up and is tied by two cotton bands.world war 11 1939-1945, cotton, khaki, soldier field kit, sewing kit, new guinea, army supply department, australian army, moorabbin, bentleigh, cheltenham, -
Beechworth RSL Sub-Branch
Bayonet, 1907
The Type 62 is a re-badged British Pattern 1907 bayonet. Siam purchased 10,000 SMLE rifles and Pattern 1907 bayonets from Britain in 1919 to equip the "Wild Tiger Corps," royal bodyguard of Vajiravudh, King Rama VI (reigned 1910–1925). The tiger figural on the ricasso is representative of the Wild Tiger Corps. Year 2462 on the Buddhist Calendar corresponds to 1919. SMLE rifles and Pattern 1907 bayonets were taken from British stocks, refurbished by Birmingham Small Arms (BSA), and remarked with Siamese markings. The bayonets were shipped with standard steel-mounted leather scabbards. However, the leather rapidly deteriorated in the tropical climate, so the Siamese made a replacement steel scabbard body to which the original steel mounts were brazed. Sword bayonet for use with the .303 caliber Short, Magazine, Lee-Enfield No. I Mk. III (SMLE) rifle.A tiger head on the left side with some symbolsww2, world war 2, bayonet -
Beechworth RSL Sub-Branch
Scabbard Bayonet, 1907
The Type 62 is a re-badged British Pattern 1907 bayonet. Siam purchased 10,000 SMLE rifles and Pattern 1907 bayonets from Britain in 1919 to equip the "Wild Tiger Corps," royal bodyguard of Vajiravudh, King Rama VI (reigned 1910–1925). The tiger figural on the ricasso is representative of the Wild Tiger Corps. Year 2462 on the Buddhist Calendar corresponds to 1919. SMLE rifles and Pattern 1907 bayonets were taken from British stocks, refurbished by Birmingham Small Arms (BSA), and remarked with Siamese markings. The bayonets were shipped with standard steel-mounted leather scabbards. However, the leather rapidly deteriorated in the tropical climate, so the Siamese made a replacement steel scabbard body to which the original steel mounts were brazed. Scabbard bayonet metallic slightly tapered rectangular with rounded edges; oval belt nob on blazed steel top of the bayonet and a blazed steel bottom; the body is steel with dents and a wear holes on one side.ww2, world war 2, bayonet -
Mont De Lancey
Hole Punch and Button Eyelet Pliers
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.A metal hole punch, and metal button eyelet pliers, both used for shoe-making.AMG Darholeybootmaking tools -
Mont De Lancey
Lasts
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.2 x wooden Lasts (Adult size) with metal screws. 1 x cast iron Last (Child size) with holes in base and a removable elevated top.Wooden: Size 6 (80) Cast Iron: Size 9 Dbootmaking tools, boot lasts -
Mont De Lancey
Last
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast Iron Last on a four-footed base/stand. Last is removable from stand, and can be moved into different positions on top of the stand.bootmaking tools, boot lasts -
Mont De Lancey
Last
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast iron double-ended Lap Last.bootmaking tools, boot lasts -
Mont De Lancey
Bootmaker's Repair Stand
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Wooden bookmaker's repair stand, opens slightly at one end. Two pieces of wood connected by two screws.bootmaking tools -
Mont De Lancey
Heel and Sole Cutters, Mobbs & Lewis
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast Iron pieces - 1 Heel cutter and 1 Sole cutter.bootmaking tools -
Mont De Lancey
Half-Moon Knife
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast iron handmade knife with a wooden handle, attached by a nail.bootmaking tools, cutting tools -
Mont De Lancey
Circular Welt Cutter, Wandin Thomas Sebire JP
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast iron Welt Cutter with a wooden handle.