Photograph of Don Raitt as a baby in a cane & seagrass chair, born 1903. Don is the son of Jim & Mary Jane Raitt Stawell. Don in his working career worked as a blacksmith for Bert and Edgar Heal, Upper Main St. He later worked at North Western Woollen Mills Pty. Ltd. Playford St Stawell.Sepia photograph of Don Raitt seated on a floral cushion in a cane & seagrass chair in studio setting. Dressed in a winter overcoat with large buttons on front. Cape like collar with a lace trimmed bib over the top. c1904Stawell Photographic Co., Main Street. Close Railway. C. Hewitt, Manager. Hand written on back is Don Raitt cousin of B Biggs. Also Stawell Photographic stamp.stawell portrait

Abel Hoyle Turton was born in 1877 and married Hannah Richardson of Barnawartha, Victoria in 1902. He established a wheelwright and coach making business. Mr. Turton also operated a blacksmith business as a side trade. In his earlier years he was actively involved in the fire brigade, including as Secretary, and on the committee of the Wodonga Brass Band. Mr. Turton also served as secretary of the local branch of the Australian Natives Association. In 1912, despite having received a long service medal for the Wodonga Fire Brigade, Turton resigned for the brigade under a cloud after having been accused of insubordination at a fire. The brigade captain Mr. Twomey also resigned. They were both later reinstated. He died in Wodonga on 24 December 1932. After his death, the premises were taken over by George McFarlane who commenced business as a shoeing smith and general blacksmith.This image records the premises of an early 20th century Wodonga business.A black and white photograph of the premises of A. H. Turton, Coach builder of Wodonga as well as 2 newspaper advertisements for this business.Above the store: A. H. TURTON / COACH BUILDER On windows: PAINTING/ TRIMMING/ RUBBER TYRES A SPECIALITYwodonga businesses, a. h. turton, turton wheelwright wodonga

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Four colour photographs (laser printed on paper); two showing the fitting of the time capsule into the monument and two showing Joh Ebeli during the dedication presentation.eltham, joh ebeli, time capsule

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Four colour photographs (laser printed on paper); two showing the fitting of the time capsule into the monument and two showing Joh Ebeli during the dedication presentation.eltham, joh ebeli, time capsule

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Four colour photographs (laser printed on paper); two showing the fitting of the time capsule into the monument and two showing Joh Ebeli during the dedication presentation.eltham, joh ebeli, time capsule

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Colour photograph (one of four)eltham, joh ebeli, time capsule

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Colour photograph (one of four)eltham, joh ebeli, time capsule

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Colour photograph (one of four)eltham, joh ebeli, time capsule

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Colour photograph (one of four)eltham, joh ebeli, time capsule

In November 1985 a monument was installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria's 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society's 20th anniversary. The main feature of this monument is a ?tyring disc?, a blacksmith?s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red hot iron hoop, previously forged to the correct size was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel.Four colour photographs (laser printed on paper); two showing the fitting of the time capsule into the monument and two showing Joh Ebeli during the dedication presentation.eltham, joh ebeli, time capsule

Titled French's Corner and Village Parliaments. French's Corner was once the meeting place of the old Cornish miners where they used to discuss local and international affairs. Headings of the paragraphs are - Teetotallers - Most of Them, Pre-Federation Days, A Shoemaker's Group, Last of his Group, Smith with Curving Nail and Shoeing Force. At the end of the article is a photo - Looking south from the Blacksmiths Shop up the main street of Long Gully.bendigo, history, long gully history group, the long gully history group - french's corner and village parliaments, manchester arms hotel, french's hotel, mr french, uncle tom foss' shop, phillpot's smithy, a crossley

Emma Thomas Collection: Items were owned by Emma Courtis, nee Thomas. Family lived in Hamelin St, White Hills. Clothing items possibly handmade by Emma or a local person in White Hills area and used around 1890s. Emma's family include Elizabeth Penrose (mother), Solomon Thomas (father), and Richard Courtis, a blacksmith (her husband).Short sleaved, tailored blouse. Handmade with decorative embroidery and crochetwork around neckline and sleaves. Crochet work is also used on both sides of the vertical central panel which is fastened by 7 cream coloured buttons. Seams are used to make this a fitted garment at the waist. There is a "clip" in the front and back of the blouse. emma thomas, emma courtis, blouse, clothing

Emma Thomas Collection: Items were owned by Emma Courtis, nee Thomas. Family lived in Hamelin St, White Hills. Clothing items possibly made by Emma or a local person in White Hills area and used around 1890s. Emma's family include Elizabeth Penrose (mother), Solomon Thomas (father), and Richard Courtis, a blacksmith (her husband).Black jacket is handmade with a heavy cotton lining. Collar and hem of the garment are lined with black velvet. Sleeve hems also lined with a band of black velvet. Hock and eye fasteners provide centre closing. Twelve small, black buttons (decorative) have been sewn vertically along the centre panel from collar to hem. Boning has been inserted into both of the side seams to shape the jacket. Darts, with decorative stitching, have also been used to tailor the front of the jacket around the centre closure panels (Three darts on either side of the centre closure panels). A central seam runs through the jacket back which ends in a "scalloped" shape.emma thomas, emma courtis, clothing, jacket

Photo Spark/Jones Collection (Albert Jones photographer) reproduced on p172 of The Diamond Valley Story by Dianne H. Edwards, Shire of Diamond Valley 1979. "Blacksmith W. Everett devised metal fittings that enabled a jinker's shafts to be quickly replaced by a centre pole to harness a pair of horses. This vehicle won him a prize at the Royal Agricultural Show early in the century."Black and white copy of photo printed on glossy photographic paper 30.5 x 40.5 cm (12 x 16 inch); image size approx. 18.5 x 28 cmdiamond valley story, horse drawn carriage, jinker, w.j. everett

Document outlining the change of ownership of a Quartz Claim, all machinery and buildings at Spring Hill near Creswick, Victoria. This ownership transfer was between Misters Ferguson and others to Misters Lamble and McCallum. Each person mentioned signed the document. All machinery and parts thereof are listed, plus any buildings, tools, blacksmith's shop and tools, ropes and paints/tar, etcLarge cream coloured thick paper, Hand written in black ink. Twenty-four seals Signatures of owners.james ferguson, edward david, thomas barnett, edward jones, james archibald, john phelan, william innis, james collins, dick collier, charles talbot, joseph stevens, x (his mark) william thomas, x (his mark) thomas walters, john powell, thomas collier, a bach, e milligan, thomas knowles, x (his mark) john edwards, x (his mark) david davies, john evans, william lamble, james mccallum, james faulkner, evan sloyd

Apprenticeship Indenture made on the second of February 1878 between Thomas William Orr and Charles Stoneman commencing 20 July 1878 for the terms of five years ending 19 July 1883. Indenture between 'James Orr, father of Thomas William Orr ( now employed as a blacksmith with Mr. Charles Litchfield Stoneman, Coach Builder) of Sandhurst. The said James Orr (father) agrees to allow his son Thomas Orr (unclear) to ecome an apprentice to the said Charles Litchfield Stoneman to the trade or business of a blacksmith.' Pinned to front of indenture is a newspaper article, no date, re the conditions for apprentices 'have certainly changed in the last 60 odd years' and details the conditions of a coachbuilder apprenticeship in 1889. 'Taverns , inns, or alehouses he shall not haunt' and 'matrimony he shall not contract' are some of the terms of apprenticeship. Original envelope, enclosing indenture, has written on the front 'Apprenticeship Indenture, Thomas William Orr to Charles Stoneman, 1878' Royal Historical Society of Victoria, Bendigo Branch, stamped on front of envelope.document, memo, apprenticeship indenture

Henry Froud's Blacksmith Coach Building and Wheelwright's business set up at original surveyed site west of present township, nearer to cemetery turnoff,. Business first moved to corner of Princes Highway and Bruthen Road, (now site of Black Stump Store), then moved to premises built by Harry Froud on south side of highway, corner of Punt Road, (present site of BP Garage).Black and white photograph of Harry Frouds first coach factory west of present township, showing three men in front of four wheeled vehicles including a steam engine. Three workshops in background, two having bark roofs, man in centre identified as Harry Froud, William Henry. Johnsonville Victoria.retail trade, transport

Used as a souvenir ticket and postcard on the opening day of the Electric Supply Co. of Victoria (ESCo), Ballarat tramways on 18 August 1905, Has been punched for the Mount Pleasant and Orphanage - Grenville St section. Collected by David Budge - 1879 - 1974, son of William and Mary Budge of Trevor St Ballarat, who worked for the Victorian Railways as a blacksmith residing in Walnut St Carnegie. Demonstrates a souvenir item for the opening of the electric tramways in Ballarat in the form of a postcard, which could be sent to others as a souvenir of the new tram system in Ballarat. Has a strong association with the collector.Postcard - size Souvenir Tram ticket, printed using blue ink on one side with fare, photos of power station, engine room, boiler room and a tram & No.2341 stamped on edge. On reverse side is space for stamp, address etc., - with line & "postcard' etc., printed in red ink. See item 608 for other examples.esco, opening, tramways, ballarat, tickets, postcards, david budge

Photograph. Harry Biggs Collection. A copy of a photo of workers and other people standing in front of a timber building. The sign above the door of the shed - 'E. Old Blacksmith Wheelwright and Timber Merchant'. Two children are standing to the left of the group and then a man and woman each holding a child. There are 3 men, 1 holding a dog, three men holding tools and 1 young boy. A wagon wheel is to the right & a little dog. A sign on the wall says FIRE.business, retail, blacksmith & wheelwright, harry biggs collection, e. old, dingee

Allied military badges collected during the Great War 1914 to 1918 by Private (Shoeing Smith) John BLAIKIE 2341 who was born at Wangaratta. He was a Blacksmith and at the age of 42 enlisted on May 28 1915. He embarked on August 10 1915 and served with the 14th Battalion. He returned to Australia in January 1918 and discharged as medically unfit on April 10 1918. Inset photograph is of John BLAIKIELarge collection of allied military badges collected during the campaigns in France, Belgium and Egypt in 1916-17 by John BLAIKIE 2341. A Blacksmith who at the age of 42 years enlisted in the Army and served during the first world war. On his return to Australia he was discharged medically unfit due to rheumatism and senility. He was a stalwart of Wangaratta RSL and his collection was present to the Sub Branch as a souvenir of the first world war.Brown timber frame in the shape of Australia containing a large collection of badges and small photograph Souvenir of the Worlds Great War 1914 to 1918 Military Badges Collected by J BLAIKIE 14th Batt 4th Div AIF In Belgium France & Egypt 1916-1917military badges, ww1

Bendigo Trust Sub-Committee proceedings of meeting 10th Jan 1971 - sub-committee appointed to investigate status of Central Deborah Mine and possibility of opening the mine to the public by Easter 1971. List of those present for the meeting - J Watts; A Richardson; H Biggs; C Schumack; J Bright; Cr A Roy; J Cohn. Recommendations re Management of the Mine Property - Engine Room, Compressor Room, Blacksmith Shop, Changing Rooms, Workshop, Poppet Legs, Yard and Fences,organization, club/society, bendigo trust

Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . Bootmakers made shoes for early settlers and being leather workers also made saddles and other leather productThis hammer is typical of the type used by early settlers in Moorabbin Shire c1900 Hammer with wood handle and steel head. One side of head is rounded and the other chisel shapedearly settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

These multi function pliers were imported and used in Moorabbin Shire Many tools were imported by early settlers and also among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This pair of multi purpose pliers is typical of the type used by early settlers in Moorabbin Shire c1900 Steel adjustable locking pliers c1900 with lion head vise, and spring loaded multi grip FOREIGNadjustable pliers, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd,

Idylls of the King,first published between 1859 and 1885, is a cycle of twelve narrative poems by the English poet Alfred, Lord Tennyson (1809–1892) who was the Poet Laureate from 1850. It retells the legend of King Arthur, his knights, his love for Guinevere and her tragic betrayal of him. The book was given by Emmie Gibbs as a Christmas gift to Hilda Wehner. Hilda Wehner was the daughter of Herman Wehner (1862-1937) one of Orbost's early blacksmiths.A small red cloth covered book with a black motif on the cover. There is gold print on the spine.Inside- To Hilda M. Wehner from her friend Emma Gibbs wishing her the complimenst of the season Xmas 1916tennyson literature idyls-of-the-king book

Photographed outside the Wendouree Parade depot, late 1887, with 16 workmen standing or lying around the tramcar. Builders Photo. Tram is lettered "BALLAARAT TRAMWAY CO LIMITED". A sign on the advertising board says "Duncan & Fraser, Builders, Ballaarat". The men around the tram are dressed in trade clothes, with aprons, including carpenters, painters and blacksmiths. For image history etc see notes. See also Reg Items 1654 and 3042 for different prints of the same photo. Yields information about the construction, final assembly, of the original horse tram at the Ballarat depot 1887, shows the workmen who were involved.B&W photo (copy print) of Ballarat Horse Tram No. 1. Multiple copies held.765.3 - In the top left-hand corner "19", "No. 1 i n 1887", a red border sticker of printing instructions. Centrally on photo "(1) Ballarat Tramways (horse) Car No. 1 after assembly at the Ballarat depot. 1887". In the bottom right-hand corner a "William F Scott" address label. 765.4 - see image i4 for the rear of Wal Jack's photo notes and i8.trams, tramways, ballaarat tramway company, horse trams, depot, duncan & fraser , tram 1

James Leonard Foley’s family lived at ‘Warringal’, 3 Foley Street, Kew. Like many other soldiers from Kew, he was educated at the Kew State School. He enlisted at the age of 19 in March 1915. His previous occupation is recorded as 'Blacksmith'. James sent a postcard to his mother in 1915 saying that he was ‘quite well’. He was to be killed in action on the Western Front on 24 August 1916 and is buried in the Villers-Bretonneux cemetery. Poignant card from a Kew soldier in World War 1 who was later to die on the Western Front.Single page Field Service Postcard and Envelope from James Leonard Foley to Mrs Eliza Foley of 3 Foley Street in Kew. Private J.L. Foley (1600) served during World War one with the 24th Battalion. He died on the Western Front. His parents were Edward and Eliza Foley of 3 Foley Street, Kew.Mrs E Foley, 3 Foley Street, Kew, Vic [Signed] JL Foley 8/9/15first world war (1914-18), james foley, world war one, foley street, warringal, villers-bretonneux cemetery, e. foley, edward foley