Document. Greeting Cards. Single, light beige card with a picture of an older woman. She is wearing a peaked type of hat and has her finger up to her mouth. A printed border surrounds the picture. At the top is written in ink: 'This is how I spent my money at Luna Park'. Beneath the picture is printed in black with some words in bold type: Your Second Wife should conform to the general lines of this picture. I advise you to drop another coin in the same slot and secure a photo of your First Wife. There is some important personal advice on love and marriage for you in another section and do not fail to secure a photo of your first baby. Underneath is printed 7-G-5person, greeting cards, malone collection, malone collection, greetomg cards.

Demonstrates the safety record of the SEC Ballarat depot, has a strong association with the workers and Yields information about their performance and dates.Timber framed box, glass fronted, Masonite back, painted black on the edges and front with a slot on the underside and metal catch screwed to the timber that allowed a preprinted poster to be slid out from the base. The poster titled "Our Safe Working Days Score", provided with secured to the poster, four metal sheets pressed with three rounded edges to allow a paper strip to be slid in from the right hand side and secured. Poster has been preprinted for the SEC Electricity Supply Department". The top strip gave the name of the location "Ballarat - Tram - Depot", the second strip - no sheet present and purpose not known, date since the last event "9-4-69" and the previous best score - "982" days.trams, tramways, depot, sec, safety, personnel

Pressed metal plate with corners trimmed and rounded, top section partly folded with two slotted holes, four with sides folded to give strengthening to the plate, painted with a white background and the letter "M" and numbers painted in red, to give a Run Number Plate for Malvern Depot. Painted with the same detail on either side of the plate. Used by Malvern Depot until they were phased out and replaced with the Automatic Vehicle Monitoring system c1990. Used to identify the depot and "run number" or timetable that the tram was running on, two in each tram, to enable monitoring by inspectors and crews. M74 See Also Reg Item 189 and associated item for other examples of Malvern plates. Strengthening of the plate was the result of damage by crews to the plain sheet type.trams, tramways, mmtb, timetables, buses, trams, inspectors, malvern depot

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat, justus jorgensen

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat, third place

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat, first place

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat

Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat, great hall

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. Sometimes the board was labelled with organisational labels. In this example, the Rules of Membership for the Victorian Association of Braille Writers was attached, which included the costs of being a transcribing member and the length of the loan period. It is signed by Millicent Ritchie (Hon. Secretary) and Minnie H Crabb (Asst Sec and Librarian) at the base of the sheet.Brown rectangular wooden board with hinged paper clamp and metal hinged guideFree Lending Library for the Blind label is attached to boardbraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. This donation includes the signature of Miss Bertha Yoxon, who was a student that transcribed braille around the 1920's for the Victorian Association of Braille Writers, and the owner of this board and textbook. Some originals of her work and a translated letter from her friend James Grubb accompany the frame. 1 wooden board and Braille paper, with 1 Braille text bookbraille equipment, victorian association of braille writers

The actual history of this object relating to Warrnambool is unknown at this stageSome photos have been identified as local people from WarrnamboolLeather bound. Brown. Engrave with Gold and Black. Ornate scrolled, embossed work on cover with The words The Colonial Family Album on the front, back and spine engraved. Metal locking clasp is broken. 23 pages. Binding in blue tape. Each page is highly decorated changing on each page, facing pages match each other, colours used are gold, red, blue, pink and green. Photos are taken mid 1870's to late 1880's by photographers from Melbourne, Portland & Ballarat. Sepia photos, 20 large frames of men & women, 20 small oval & round topped oblong frames. Collection of Women, Men, Teenagers and children. Each photo slides in from the bottom of frame through a small slot.album. photographs. photographers. ornate art work., warrnambool historical society

NSWTD Railway Marker OIl lamp, No.1 RA Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil Lamp NSWTD Railway Marker lamp, No.1 RA made of metal and Glass Railway lamp, paraffin, metal/glass/fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870 - 1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTD 1 RApuffing billy railway , pbr, nswtd railway marker oil lamp, no.1 ra

Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top. An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Iron; small flat domestic iron.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, iron, flat iron, domestic iron, laundery, ironing equipment, sad iron

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with traces of original black finish on handle. Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with stand None item too badly corrodedflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose

The donor received the projector from a relative. He used it in the City of Whitehorse and surrounding areasWaterworth Slide Film Strip Projector, Model A - 300 watt, without a fan but with ventilating slots on top and an open bottom for air to flow. It has a carrying handle and a power lead with 3 pin plug which is wired in permanently. The projector lamp is at rear under the carrying handle. Image is projected through three stage lens via via the image on the 35mm strip or slide. The front lens is adjustable for focus. A knurled nut enables a height adjustment at front. Slides are inserted through the holder - whilst one slide is shown the other can be loaded ready to be slid in front of the light. The film strip holder is missing. The unit is finished in a grey hammer finish paint used in 1960 t0 1980s. The operating instructions are filed in the supplementary envelope. The projector is stored in a hand made three ply hinged box.Waterworth Hobart 5553Aphotography, projectors

Glen Eira has a long history of association with various heraldic forms. From its early years the municipality of Caulfield had used the armorial bearings of the Caulfield Family (the Charlemonts of Castle Caulfield) to represent the roads board and later the town and city. In 1969 Caulfield City Council began planning to apply for an official coat of arms for the City. In 1974 Horace Hall, a Balwyn North resident and member of the Heraldry Society in London advised Council that the current usage was illegal, and that the Houston family, current owners of the Caulfield Arms could take legal action against Council for 'usurping their arms'. Mr Hall was commissioned to develop new heraldry for the City, and in conjunction with J. P. Brooke Little at the College of Arms, London, he prepared an acceptable design for Caulfield's Coat of Arms. The Council paid an additional sum to have a standard painted on the Letters Patent and the municipality's new coat of arms was drawn up in June 1975. The Coat of Arms retains a number of heraldic elements from the original Caulfield family insignia, including the dragons, the colours and the elements of the shield. The newly registered coat of arms and Letters Patent document for the granting of arms was presented at a civic service to mark the granting of armorial ensigns and the city banner to the City of Caulfield on the 1st May 1977. Significant elements of the coat of arms granted by these Letters Patent are as follows: The motto 'Labore Vinces' translates to 'By our labours we will conquer'. The helmet represents the rank of the owner. Public authorities are granted an esquire's helmet. The brickwork on the crest is a recognised emblem of local government. The Letters Patent also display a banner and a badge, both official symbols of the City of Caulfield. The badge, which is displayed on the banner as well as on its own, features a bridled horse. This represents the importance of racing, the Caulfield racecourse and the Caulfield cup to the municipality. These letters patent officially proclaim the granting of the coat of arms to the City of Caulfield. They are highly significant to the City of Glen Eira as they are the primary document that signifies the official and ceremonial heraldic powers of the Coat of Arms of the City of Caulfield. Mounted Letters Patent illuminated document for the Grant of Arms to the City of Caulfield presented on 1st May, 1977. Hand written and hand painted on cream coloured parchment using different coloured inks, mainly black, blue, red and gouache and gold paint. The bottom edge is folded up over itself approx. 45mm revealing the flesh side of the parchment, which displays black ink signatures and three sets of two horizontal slits that hold three blue ribbon. The ribbons support three wax seals in round, gold coloured metal cases held by the wax through slots in the casing. Although covered by the cap top, each wax seal within displays a different flag emblem with a crown on top, surrounded by a ring of text (difficult to read), noted when the cases were opened during conservation treatment. See attached transcription.arms, symbol, heraldry, glen eira, council, caulfield

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a three horse drawn enclosed coach replicates the vehicle that enjoyed respect from the public during the 1880's. There were four horse drawn models as well.A model of a black enclosed coach which is a four wheeled passenger horse drawn vehicle where the driver sits at the front behind the three brown horses. It has two large and two smaller gold painted spoked wheels with black rims, two gold painted coach lamps, black padded seating and four open windows with blinds that are rolled up. There are two doors with a step for easy access into the coach. A long brown wooden shaft separates the horses which also have black vinyl shaft style straps on both sides as well as the necessary horse tack for carriage use to help the driver communicate with the horses. A hand operated brake is next to the driver with the brake pads attached to the back wheels. There is a brown wooden slotted luggage rack at the back held on by two gold chains. On top of the coach is a decorative gold painted luggage rack. replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, road transport, coaches

Alfred Dührssen (23 March 1862 – 11 October 1933) was a German gynecologist and obstetrician born in Heide, Schleswig-Holstein, at the time part of Denmark. He studied medicine at the University of Marburg, as well as the Kaiser-Wilhelm-Akademie für das militärärztliche Bildungswesen (Kaiser-Wilhelm-Academy for Military Physicians). In 1886, he became an obstetrical assistant to Adolf Gusserow (1836-1906) in Berlin, and in 1888 he began work as a lecturer at the University of Berlin. In 1892 he opened a private clinic for obstetrics and gynecological diseases. Dührssen was a prominent figure in modern German gynecology, being remembered for his pioneer work in surgical practices such as vaginal Caesarean section (vaginalen Kaiserschnitt). He was an advocate of institutional births for all pregnancies, and proposed that pregnant women undergo screening processes to uncover possible difficulties prior to giving birth. (Wikipedia) Metal uterine dilator consisting of a handle, a short shaft, and eight prongs. The prongs each have a bump/curve in the prong towards the top, to allow them to bend around the shaft of the instrument and meet at their tips. There is a second 'bump' in the prongs just before the tips. The tip of each prong has five ridges to assist with grip. The handle of the device is a flat, rounded handle, which is turned to open the prongs and set them at various degrees of diameter. There is a gauge on the shaft of the instrument which ranges from 0-12, showing the current setting of the instrument. There is also a pin and T-shaped slot arrangement located just above the start of the prongs, which has been engraved '8' on the left hand side, and '1' on the right hand side. Each prong is also engraved with a number at the base of the prong, reading '1' to '8'. gynaecology

Photo was taken on a Pentax k1000 on 35mm B&W film. And burned and dodged in the darkroom with a filter of 5 layered on filter 2. Montsalvat Youth Photography Prize 2023 The Montsalvat Youth Photography Competition 2023 was opened to young people aged 14 - 18, based in Victoria. Entrants were invited to explore the grounds, buildings, people, and activities of Montsalvat – to capture its essence and bring their own imagination to the process. First Prize: $1000 sponsored by Future Leaders The winner’s work printed and framed by Montsalvat for display in the Barn Gallery for a three-week exhibition slot. Second Prize: $500 Ten artists were shortlisted and placed on rotational display on Montsalvat’s website and screened in the Barn Gallery for a three-week digital exhibition. In sponsorship with Eltham District Historical Society, the shortlisted works were also to be catalogued and preserved, providing a permanent display of work for young photographers. KEY DATES: Entries opened: Monday the 3rd of April 2023 Entries closed: Friday 8th September - Midnight Finalists advised: Friday 15th September The winners were formally awarded their prize at Montsalvat on Sunday, October 8, 2023. The winners: • 1st place – Yirong Huang Enliven • 2nd place - Rhys Humphries, The Countess • 3rd Place- Jemimah Lavis Windowmontsalvat youth photography prize 2023, montsalvat, second place, emilion clark

Henry was a familiar persona in Union Road and around the Surrey Hills Neighbourhood Centre for decades. He lived all his life within 3 kilometres of his radio shop. Son of Catherine and ‘Mick’ Jamieson, Henry was born in 1927 in View Street, Surrey Hills and was educated at Box Hill Grammar School. His father died when he was young and Henry took a job as a technical assistant with the Commonwealth Film Unit. Film was a life-long interest and he became a longstanding member of CATHS (Cinema and Theatre Historical Society of Victoria). Henry also had a profound love of music which was reflected in his work and hobbies. He joined Adrian Knowles, who had started his radio shop at 149 Union Road in the 1940s, and trained at RMIT as a radio tradesman. In time Henry took over the business. When 3MBS established in Kew, Henry was an enthusiastic supporter and volunteer. For some years Henry and a co-producer presented a prime time Saturday evening programme 'Bach to Bernstein'; later his distinctive voice could be heard in the early morning time slot, 'Daybreak'. Henry was also a staunch supporter of the Surrey Hills Historical Society and served as its President for a number of years. Henry died in 2011. Colour photo of a bearded man inside a shop with an assortment of radio and electrical appliances and components.knowles radio, surrey hills neighbourhood centre, union road, surrey hills historical society, cinema and theatre historical society of victoria, 3mbs radio, henry jamieson, adrain knowles

GEORGE ROSE 1861-1942: - George Rose was a well-known Victorian photographer, famous for his late 19th and early 20th century photography. He was born in Clunes, Victoria, and was in his 20th year when he founded Rose Stereograph Company in 1880. He took the opportunity of a popular trend of the times to produce stereographs, pairs of almost duplicate photographs that appeared in 3D when viewed in a handheld stereo viewer. By the 1920s, these lost their popularity, so he used his photographic skills to produce cards and postcards of scenes and people. The twelve photographs in the Rose postcard folders include locations connected to other items in our Collection, including the Valentine postcard folder in this set. The photographs are titled: - . The Avenue and War Memorial. Warrnambool. Vic. . The Blow-hole. Thunder Point. Warrnambool. Vic. . Botanical Gardens. Warrnambool. Vic. . Eagle Rock. Warrnambool. Vic. . The New Concrete Bridge and Breakwater. Warrnambool. Vic. . Liebig Street. Warrnambool. Vic. . Looking to Thunder Point. Warrnambool. Vic. . The Beach. Warrnambool. Vic. . Hopkins Falls. Warrnambool. Vic. . Shelly Beach. Warrnambool. Vic. . The Mouth of the Hopkins River. Warrnambool. Vic. . Panorama of Warrnambool, Vic. [Kepler Street towards Presbyterian Church on Spence St] The photographs in this postcard folder were taken between 1880 and 1942 by the renowned Victorian photographer George Rose. The locations match photographs and postcards in our collection that were taken at different times. A comparison between them shows the changes over time in the land and bay, the buildings and other structures, transportation and even the fashions of the times, building the story of our local history.Postcard folder, Rose Series, blue cover. One of a set of three containing images of Warrnambool and district before 1942. Green folder, textured cardboard folder containing a Z-folded strip of white matte photographic paper with six black and white photographs on each side. Titles are printed below the images. The folder is secured by placing two tabs into two slots on the back cover to hold the cover in place and create an envelope shape. Three horizontal lines are printed on the front for the receiver’s address. There is a logo of a long-stemmed rose on the left side and inscriptions on the front cover. The lithograph photographs were taken between 1880 and 1942 by well-known Victorian photographer George Rose and published by Rose Stereograph Company of Armadale, Victoria. The folder contains scenes of popular areas at Warrnambool and nearby locations including Lady Bay, the Port of Warrnambool, the Warrnambool Breakwater, the Viaduct, the Merri River Footbridge, the Hopkins River Mouth, and Proudfoot’s and the Fanny Nelson/Flett boathouses. Image: [Rose with rosebud and leaves] Printed: "Rose Series / Picturesque Views of / WARRNAMBOOL / AUSTRALIA" "PUBLISHED BY / ROSE STEREOGRAPH CO / ARMADALE. VIC." flagstaff hill maritime museum and village, great ocean road, shipwreck coast, warrnambool, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, warramble, postcard, postcard folder, warrnambool scenes, picturesque views of warrnambool, picturesque views of warramble, lady bay, port of warrnambool, breakwater, warrnambool breakwater, viaduct, merri river footbridge, merri river suspension bridge, suspension footbridge, merri river mouth, hopkins river mouth, proudfoot's, fanny nelson, nelson's boatsheds, nelson's boathouse, boathouse, hopkins river boathouses, flett's boathouse, flett, george rose, image of a rose, rose series, rose stereograph co, rose stereographic company, lighograph, armadale victoria, lady bay beach, beach scene, lower light, concrete footbridge, 1922 footbridge, viaduct road, rose postcard, new concrete bridge, 1945, 1890, 1922, small footbridge, 1872 footbridge, 1872, merri river estuary, stingray bay, postcards