Wool picking machine designed to separate locks of wool before it is carded and spun. The picker opens the wool’s locks which makes it easier to send the fleece through a carding machine. It does this by teasing the fibres (which can also be done by hand just by pulling the lock structure apart), but a picker does this in bulk and much quicker than what can be done by hand. It is possible to spin fibres directly after the picking stage; however, it is usually more desirable to card and blend them with other fibres. Typically, at a textile mill, a picking machine can separate enough lengths of fibre for a full day’s work after just a single hour. It will also help to remove any vegetation matter or other any unwanted elements that may be present in the wool. The quality of the casting on this machine suggest that it was made locally, either in Australia or New Zealand. Mike Leggett, the donor of the machine, acquired it from New Zealand where the seller said it had been used by his father to pick wool to make hand stuffed horse saddles. Mike attempted to used it a couple of times to pick alpaca hair, but the speed of the attached motor caused damage to the fibres. The motor is thought to be an added attachment, sometime around the 1960s judging by its age, while the machine itself is thought to be dated around the 1920s. The machine works by inserting wool through the rollers. Initially there was a conveyor belt feeder system which was powered by the handle on the side. This conveyor belt has been removed however, most likely due to age and deterioration. Wool is now fed through the initial teeth and is met by a spiked rotating drum which works to separate the fibres. The separated fibres would then complete a loop of the drum before being dispatched somewhere below, around where the motor presently sits, at a rapid rate of speed. Typically this wool will be collected in a closet or large catchment area, as can be seen from the 8:47 minute marker in the linked video (link - https://www.youtube.com/watch?v=kMjx-t3tH3A). It is not apparent how the wool is collected with this machine. Red and green machine with four green legs currently attached to a wooden pallet with wheels for easy movement. The green legs lead up to a red central circular barrel from which many attachments are present. Also present on the wooden pallet is a small black motor which is attached by a rubber belt to the central drum inside the red barrel. The belt spins the wooden drum via a dark red circular plate attached to the side of the drum. On the other side of the red barrel, a green handle extends for turning the picker’s conveyor belt feeder system. Two green walls extend forward from the central red barrel, guarding either side of where the conveyor belt would have been. At the start of these walls is a wooden cylinder, which the conveyor belt would have wrapped around, followed by two interlocking gears which rotate and accept the fed wool. The red roof extends over the central cylinder from here, securing the wool inside and protecting hands from the heavily spiked internal wooden cylinder which rotates and separates (picks) the wool. Extending over the top of this red roof is a green handle which reaches to the back of the machine (not pictured). Here it accepts a weight to ensure pressure is always present for the initial feeder interlocked gear teeth. There are two large gear cogs on the rubber belt side of the machine and 3 small gear cogs on the handle side of the machine, all coloured green. A green handle is also present at the rear of the machine, below the location from which the weight is hanging. A power cable extends from the motor and there are two adjustable metal rods on the top of the machine, the purpose of these rods is presently unknown. Black texter. On top of drum. Wording: HG3707 Wording. Imprint: BRACEWIND BLYN On motor. Wording AEIwool picking, textile manufacturing, wool processing

This photograph shows the "lay back" atmosphere enjoyed in a small country town in the 1940s to the 1950s. Two women and a young boy basking in the warmth of the sun. The unsealed drive way and cars parked close to the entrance was typical of small towns during this period. Open doors and shady trees provided sufficient cooling for most sunny days. The wooden barrel next to the outside wall shows that storage space within the hotel was limited and that metal aluminium barrels had not been in existence. This photograph was taken at a time when children and women had limited access to the major drinking and entertainment facilities within a hotel(pub). Legal drinking age was for patrons 21 years and older and no strict dress codes where applied. The hotel bar was not open on Sundays (God fearing) and opening time restrictions were in place. "In transit" clients were given some leniency when staying in small country hotels as strict liquor laws This photograph presents a window to a life in the 1940s to 1950s, of a small town in the Kiewa Valley. It covers a period when the local hotel or "pub" was the meeting point for local men and women to talk about local events and life in general. It was also a point where "locals' had the first opportunity to meet new arrivals and converse with tourists and "through traffic". The importance of "face to face" verbal communication was a critical part of community life and interaction. The hotel(pub) was in this period the hub of small communities, and together with local churches provided the essential structure for a balanced existence in rural Australia.Black and white photo of Tawonga Hotel. This photo is in itself a photo of a photo and as such lacks fine detail. This reproduction is on "Kodak XtraLife II paper ""outback" hotels, pubs, rural short stay accommodation, tawonga hotel

Appears to be part of sighting telescope for artillery. Further ID information has been sought from various sources, in including the Royal Australian Artillery History Company. The RAAHC have been most cooperative and interested in attempting to identify the equipment of which this item is a part, but with no firm details on its use or history at the time of cataloguing. Detailed communication between RAAHC and MERSL are available from the latter.Off-centre ring part way along barrel has engravings for elevation (?), ranging from 57 to 69 (see 4th picture above). Actual numbers engraved are 57 63 69, with small engravings to mark each degree between these intervals.

This Dollond Day or Nigh telescope was designed to be used in any light conditions, as its name implies. Telescopes are optical instruments designed to make objects appear to be larger or closer. The discovery of the first telescope in 1608 can be attributed to Hans Lippershey of the Netherlands when he discovers that holding two lenses up some distance apart bring objects closer. He applies for a patent on his invention and this becomes the first documented creation of a telescope. Then in 1668, Newton produces the first successful reflecting telescope using a two-inch diameter concave spherical mirror. This opened the door to magnifying objects millions of times far beyond what could ever be obtained with a lens. It wasn’t until 1729 that Chester Moor Hall develops an achromatic lens (two pieces of glass with different indices of light refraction combined produce a lens that can focus colours to almost an exact point resulting in much sharper images but still with some distortion around the edges of the image. Then in 1729 Scottish instrument maker James Short invents the first parabolic and elliptic, distortion-less mirror ideal for reflecting telescopes. We now come to John Dollond who improves upon the achromatic objective lens by placing a concave flint glass lens between two convex crown glass lenses. This had the effect of improving the image considerably. Makers Information: John Dollond (1707-1761) London England he was a maker of optical and astronomical instruments who developed an achromatic (non-colour distorting) refracting telescope and practical heliometer. A telescope that used a divided lens to measure the Sun’s diameter and the angles between celestial bodies. The son of a Huguenot refugees Dollond learned the family trade of silk weaving. He became proficient in optics and astronomy and in 1752 his eldest son, Peter joined his father in an optical business, in 1753 he introduced the heliometer. In the same year, he also took out a patent on his new lenses. He was elected a fellow of the Royal Society in May 1761 but died suddenly in November and his share in the patent passed to his son Peter. In subsequent squabbles between Peter and the many London opticians who challenged his patent, Peter’s consistent position was that, whatever precedents there may have been to his achromatic lenses, his father had independently reached his practical technique on the basis of his theoretical command of Newtonian optics. As a result of maintaining his fathers patent, Dollond s became the leading manufacturer of optical instruments. For a time in the eighteenth and nineteenth century the word 'Dollond' was almost a generic term for telescope rather like 'Hoover; is to vacuum cleaner. Genuine Dollond telescopes were considered to be amongst the best. Peter Dollond (1731-1820) was the business brain behind the company which he founded in Vine Street, Spitalfields in 1750 and in 1752 moved the business to the Strand London. The Dollonds seem to have made both types of telescopes (reflecting and refracting), possessing the technology to produce significant numbers of lenses free of chromatic aberration for refracting telescopes. A Dollond telescope sailed with Captain Cook in 1769 on his voyage to observe the Transit of Venus. Thomas Jefferson and Admiral Lord Nelson were also customers of the Dollonds. Dollond & Co merged with Aitchison & Co in 1927 to form Dollond & Aitchison, the well-known high street chain of opticians, now fully part of Boots Opticians. They no longer manufacture but are exclusively a retail operation.    John Dollond's experiments in optics and how different combinations of lenses refract light and colour gave a better understanding of the divergent properties of lenses. That went on to inform and pave the way for the improvement of our understanding of optics that is represented today. Dollond was referred to in his time as the "Father of practical optics" as a leader in his field he received many prestigious awards. The telescope in the collection is a good example of one of Dollond's early library telescopes. Its connection with one of England's 18th century pioneers in optical development makes it a significant and an important item to have within the collection.Telescope: Dollond's Telescope, Day or Night model navigational instrument. Telescope is mounted on wooden tripod stand that has folding legs. Brass telescope with leather sheath over barrel, adjustable angle fitting with brass wing nuts that join the legs to the top frame, which is then joined to the telescope pole by an adjustable screw fitting. Manufactured by Dollond, London. Inscription reads "Dollond London, Day or Night" and "DOLLOND LONDON"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, telescope, dollond, dollond london, day & night telescope, floor-standing telescope, optical instrument, john dollond, peter dollond, achromatic telescope, heliometer, light refraction, instrument maker, lens, transit of venus, astronomical telescope, concave lens, library telescope, dollond telescope, day or night, day or night telexcope, scientific instrument, navigation, navigational instrument, astronomy

Originally labelled "Beauville Estate, Established 1936, Still Thriving 65 years on, 10th March 2001", the Beauville Estate Album contains colour photographs of houses in the Estate. They were taken around the time of the Beauville Estate’s 65th Heritage Celebration held on 10/03/2001 and donated to the Caulfield Historical Society shortly afterwards. Photographer unknown.City of Glen Eira’s Heritage Management Plan Vol 2 p79 (this is p84 of the pdf version) – HO12 Beauville Estate and environs, Murrumbeena: The Beauville Historic Area is important at the State level as the first large housing estate undertaken by the AV Jennings Construction Co, later Jennings Group Limited, Victoria’s largest home builder. It is important also as a very early estate development incorporating a range of features other than houses and including made roads, shops and recreation facilities. In this respect it was the forerunner of the comprehensively planned housing estate of the post war era. The estate is distinguished by its aesthetic values, as is the earlier and comparable Hillcrest Estate, which are formed by a combination of restrained diversity in house styles, with the exception of no. 30 in the emerging International style, and by a landscaped garden environment. Colour photograph of white rendered house with the concrete path removed from the front garden . Other features include a semi enclosed porch with arched entrances and barrel tiled flat roof with four pillars. Property features also include a tiled roof, a concrete driveway and '23' on the adjacent mailbox. Bricks are scattered on dirt path in the front garden.murrumbeena, houses, beauville avenue, architectural styles, 1930's, inter war style, a.v. jennings, av jennings, jennings, brick houses, beauville estate, porches, arches, letterboxes, sir albert victor jennings, a v jennings construction co, beauville estate heritage area, glen eira city council, architectural features, jennings group limited, land subdivision, gardens, beauville historic area, rendered houses

Photograph of Sayer Bros. Norfolk Brewery. A two storied brick building, the section on the right hand side has two chimney stacks. There is a picket fence along the front and a large curved sign over the gateway, Stack of wood are to the left inside the gateway and there are two carts loaded with barrels. Batchelders cart is visible on the left hand side outside the fence.Batchelderbuildings, commercial, norfolk brewery, norfolk brewery, sayer bros., batchelder

This large compass is well made. It is now pitted and scratched, indication much use. Compasses were used to measure and mark out the head of the barrel by coopers. Very large compasses were used by block, spar and pump makers to help shave off angles left by axes and other tools on mast sides. Also they were used by blacksmiths in their work draftsmen, carpenters, engineers and navigators.This compass is an example of a drawing instrument that could have been used in the 19th and early 20th century by coopers and blacksmiths as well as navigators and ship smiths.Compass; large metal compass, 90-degree angle, two pointed arms hinged at the top. Inscription on the top of one arm.Stamped into the metal " J J E " ( or J J F )flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, compass, drawing instrument, measuring instrument, scientific instrument, draftsman, technical drawing, navigation, engineering, blacksmith, cooper, plumber

This container is a piece of trench art. It has been made in 1917 in World War One. The container is made from a 4.5 inches Howitzer shell. The 4.5 Howitzers were British artillery units made with a short barrel and used to fire missiles over a high trajectory. It is probable that the container was made by an Australian soldier while on active service overseas during World War One. This container has no known local provenance but it is a very interesting and attractive piece of World War One trench art. This is a heavy brass container made from a Howitzer shell. The container is round with four-leaf clover –type patterns on the side and three round knobs welded on to the bottom to give it a base. There are many markings on the base of the shell and these may all be the original markings. The lid is made of lighter brass and has an octagonal-shaped knob on top. ‘4.5 Howr 11’ ‘B.A. 3 3 17’ ‘1917’ M.A.C.’ etc world war one, warrnambool

Building of new Bakehouse Oven in Thompson Avenue, Cowes. In front of wooden building and to right is part of erection of brick walls. H E West is standing mid photo on platform holding bricks. Harold West is sitting cross legged, a barrel to his right. To the left of photo and in conversation with the Wests is D H Robb. He is surrounded by bricks, barrow, platform and large pile of sand.Building of Bakehouse Oven - Thompson Avenue, CowesBuilding new Bakehouse Oven. D H Robb, H E West, Harold West.local history, photographs, bakehouse oven, cowes, phillip island, black & white photograph, mary robb

Post Office Receiving Pillar was Collected from Warrnambool City Council’s Scott Street Depot and transported to Flagstaff Hill, stored in the Barracks area Friends of Flagstaff Hill began the project of restoring the Post Office Receiving Pillar in early 2011. The replacement dome required a pattern to be made from paper, then timber, then someone to manufacture it. The cast iron body required sand blasting and undercoating. The pillar was installed in Flagstaff Hill Maritime Village in March 2014. A specialist visited the Village and painted the pillar with 7 coats of ‘post office red’ then completed the job with gold paint on the details. In 2015 an information plate of brass was fitted to the Pillar in the position that would have originally announced the clearing times. It was originally manufactured by G Couch, Engineer, Alliance Iron Works, Melbourne. Gordon Couch passed away in June 1896 and his Works were offered for auction in November 1897. HISTORY OF POST OFFICE RECEIVING PILLARS In 1851 ‘pillar boxes’ were installed at roadside locations in the island of Jersey, England; they had already been successful in several European countries. The use of new prepaid, adhesive postage stamps as well as the roadside pillar boxes meant there was no need for the public to take a trip to the Post Office just to post a letter. By 1855 London had installed its first six Pillar Boxes. In 1856 the pillar boxes were first introduced in Sydney. These were circular with a crown on the dome, supported by leaves. Early Victoria Mail was originally collected by ‘letter carriers’, first appointed in Melbourne in 1841, equipped with leather bag and hand bell. He wore a red coat with brass buttons and a black top hat! In 1844 two wooden receiving boxes were erected in Melbourne. The first cast iron boxes were installed in South Melbourne (Emerald Hill) and were still in service until 1967. They were a fluted circular design and made in England. In the early 1860’s the ‘low door round’ design posting box was introduced, being circular and surrounded by a crown, with two broad embossed bands around its circumference. The clearance door was in front of the box and low down. These were made in Australia. In the early 1870’s square boxes with a tapering top were being used. These too were made in Australia by different manufacturers with slight variations on style such as the orientation and number of slots. Next came the circular boxes again, similar to the ‘low door round’ but with the clearance door extending to just below the posting slot, often referred to as ‘high door round’. These boxes did not have embossed bands. In 1887 small cast iron boxes were introduced, attached to posts and poles and called ‘lamp post receivers’. Around 1930 a ‘London’ model was used in Victoria. It was copied from the flat-domed type in London but made in Tasmania. … [References: Flagstaff Hill Maritime Village records, The Argus, 11th April, 1890, The Argus, 2nd July, 1896, The Argus, 30th Nov. 1897, “Stamps.Au” http://www.stampsau.com, 4th April 2011 (Extracted from “Australian Street Posting Boxes” by Ken Sparks – out of print)] Post Office Receiving Pillar, or letterbox.1885 "High Door Round" design, restored 2014 Tall cast iron sylinder with decorative dome cap, slot in side, hinged door with handle shaped as a fist. Painted red with gold trip..Reconditioned barrel, reconstructed dome. Restored by Friends of Flagstaff Hill, 2014. Now a working letterbox. Made in Melbourne.Oval maker's plate “ - G. COUCH - / ENGINEER / ALLIANCE IRON / WORKS / MELBOURNE”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, post office receiving pillar, letterbox, mailbox, australia post

Fire screens were developed early in the 19th century to prevent sparks from flying into the room or logs rolling out when a fire was left unattended. They also served as ornamental or decorative items, particularly ones such as this fire screen made from beaten or forged copper. Their decorations often depicted rural scenes.This item is representative of fire screens used in Australian homes to protect them from fire during the 19th and early 20th century when open fires were the main form of household heating.A fire screen made from beaten copper with a wooden frame. The screen design depicts a group of people sitting outside an Elizabethan building with a dog in the foreground and trees either side. The building is possibly a tavern as the people are seated on barrels. The frame is made from wood and has wrought iron legs screwed in place on either side and a handle attached at the centre top edge.forged copper, fire screens, decorative household items

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection. A black and white photograph of SAS patrol onboard a 9 Sqn Iroquois helicopter prior to being flown out to a landing pad in the jungle. The relationship developed between No. 9 Squadron and the SAS had a very close, both organisations having a deep respect and admiration for the other. Note the grenade launcher mounted beneath the barrel of the M-16 rifle of the soldier in the foregroundphotograph, sas, 9 squadron, iroquois helicopter, raaf, m16 assult rifle, gibbons collection catalogue, grenade launcher, m-16 rifle, denis gibbons

Tells the life story of Ethel May Punshon, from Ballarat to St Kilda Victoria, spanning over a century and the crucial historical events she witnessed.Soft cover paperback. Front cover has white writing for title and author. Pink and orange speckled background. Lady in a brown jacket and tie, with cream shirt and holding a double barrel shotgun. Spine is speckled orange with book title in white. Authors name in a white section. Back cover is orange and pink speckled with a white section giving a blurb about the book and author.ethel may punshon, monte, miss montague, mickey and erica morley, camp 3 internment camp

Newspaper Clipping from The Age, Melbourne, Friday 7 August 1970, about the collision of a brewery truck with a crowded tram in Clifton Hill the previous evening. Front page story with photo of the interior of the tram and a photo of a woman who was injured in an Ambulance (not scanned). Describes the accident, gives details of the injured but not the two dead people (two men). Empty beer barrels were flung into the tramcar.In top right hand corner "Ronaldson Tippett" in penciltrams, tramways, mmtb, accidents, collision

The photos provide a snapshot into the way the Gardens have been used over the years for play by children. They are evidence that the cannons were in the Gardens in the early 1960s. Black and white images of small boy playing in the Gardens. He is wearing a knitted jumper with three light coloured buttons on the front. He is kneeling on the base of a cannon, looking at the camera. The image is taken from the front of the cannon and there appears to be a large artillery shell in the barrel. A wire and barbed wire fence that at one time divided the formal part of the Gardens from the Pinetum can be seen in the background. On reverse: Aidrian White / (formerly The Esplanade) / (1961/2?) / Photo donated by / Mrs White Sept 2012 / Williamstown Botanic Gardenswilliamstown botanic gardens, hobsons bay city council, 1961, aidrian white, cannons, fence, pinetum

Turkish Model 1893 Mauser Rifle, based on the German Gewehr 98 infantry rifle. Stamped on receiver is Turkish crest / AS.FA / ANKARA / 1935 (ASFA is basically Turkish Arms Factory). Various Turkish and importer markings may be found scattered over the rifle. Many Imported by Century Arms International and so marked on the barrel muzzle on this example. Internal staggered box magazine, 5 rounds, 7.92 x 57 mm (8mm) Mauser caliber. Used by the Turkish Army in World War One.Turkish Mauser Rifle mounted on a wooden display board.No 556 on the bolt No 16344 on the breach. Also AF.SA Ankara 1935. The sights are numbered from 1-20rifles,guns,ww1,turkish army rifle,lara r.s.l.

Many photos throughout the book illustrate a large collection of WW1 guns. Presented to Australian towns.Cover - hard cardboard, dark blue buckram with white print on spine. Dust cover - red, white, dark blue & beige print on front & spine. Front - colour photo of a British heavy gun in action. Back - colour photos of a German 150 mm Howitzer with long barrel, dark blue background. 94 pages, cut plain white paper, illustrated with black & white photos.books, trophies

Two black and white photographs of a Scalebuoy Unit ready to be installed on the water supply. It is a long tubular shape with ends bolted onto it. At the top it has two vertical fittings with gate valves on each one. Above the gate valves are 2 T's and another gate valve in the centre. The name Scalebuoy is along the side of the barrel. Teal and white label on the back Reg. V. Brock of Bendigo and the photo number.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, scalebuoy unit

Approx A5 size hard cover book. Under Cover orange cloth, outer cover is torn on the front at the top so can't read the full title. Cover is cream, brown & white with pictures of wine barrels on the front. On the back is an old mead recipe by Sir Kenelme Digbie - 1669 Inside the front cover is a blurb about the author & finished inside the back cover 125 pages

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Small Wheel Lorry replicates the vehicle that enjoyed respect from the public during the 1880's and early 1900's. A model of a Small Wheel Lorry with a brown short two spoked wheeled wooden tray with low sides drawn by a cream coloured horse. The horse has reins and a simple noseband.There is a single seat and footrest at the front for the driver. The wooden shafts are to control the horse whilst working and they have a silver chain attached on each side. It has four replica brown wooden wine barrels with silver rims in the cart.replicas, models, scale models, vehicles, horse drawn vehicles, toy horses, drays, carts, lorries

This cottage is at 84 Brougham Street and this photograph was taken just prior to it being sold in August 2009. The told history is this cottage was built c 1920s, then on the bank of a creek that flowed through the area, which was later barrel drained by Council. It was supposedly built by a retired sea captain and the building is unusual in that it has a brick front, while the rest of the cottage is clad in weatherboard. After being purchased in 2009, the new owner completely rebuilt the house whilst retaining the brick front.jim connor collection, brougham steet, eltham, houses

Contents: • The Society's 50th Anniversary 2017 by Russell Yeoman • Our Next Meeting - Wednesday 10th August; 'Creators, Makers and Shakers' • Heritage Excursion - Maroondah Aqueduct Walk - Saturday 3rd September • Eltham District's Early History • The Eltham Barrel by Jim Allen • Eltham Taps Run Dry • A Footnote on Shoestring • Membership Subscriptions • The Little Church in St Helena by Maureen Smith • St Katherine's Church in St Helena • Beauty Spots • ... and also • Contacts for the Eltham District Historical Society The Shire of Eltham Historical Society was formed in October 1967. The first newsletter of the Society was issued May 1978 and has been published continuously ever since on a bi-monthly basis. With the cessation of the Shire of Eltham in late 1994, the Society's name was revised to Eltham District Historical Society and this name first appeared with issue No. 103, July 1995. The collection of the Society's newsletters provides a valuable resource on the history of the Society's activities, office bearers and committee members, guest speakers and subjects of historical interest pertinent to the former Shire of Eltham and the Eltham District.A4 photocopied newsletter distributed to membersnewsletter, eltham district historical society, shire of eltham historical society

Item belonged to Maxwell Lennox Matheson No 418447 RAAF. Refer Cat No 1959 for his service record.Cleaning kit for a Vickers Machine Gun 1) Leather "wallet" for the kit 2) Brass inspection mirror, with cap, for the use of checking barrels. 3) Oil can tin 4) Oil brush, set into the brass cap of oil can 5) Gauge tension, with flat blade one end and bullet shape other end 6) Screwdriver, flat blade, wooden handle 7) Leather pouch with strap1) Front marked "303 INCH VICKERS" 5) Marked "0 - 20" scale 7) Front marked "D.D 303 VICKERS GUN E.B", rear marked "MADE BY RE BOWDEN & SON LTD. (indistinguishable) ST, NEWTOWN NSW 1942" handcrafts - leatherwork, metalcraft brassware, trades-tools, military history, vickers

black and white photo: substantial commercial ( manufacturing ) building with large chimney. Crop fenced on left. Batchelder's photography cart in centre, horse and cart with barrels and attendant on right hand side. High building has louvres in walls and louvres in central roof ridge. May be tannery ? Wood stack at right. Several small buildings in front including bark roofed slab hut. Written on rear ' flour mill ? 'Batchelderbuildings, commercial

After 2 years of negotiation between VVAA Representatives and the US Army, the Huey Cobra has landed in Melbourne. The exercise needed the support of our local Member, Mr. Greg Hunt, to ‘clear the way ‘ through the Customs and GST minefield. The helicopter, valued at $7.9 million is complete with full armaments and was brought to Museum standard while ensuring that no weaponry could ever be reactivated. The Museum paid for the helicopter to be ‘brought to museum standard’. This meant in part that the weaponry was rendered innocuous and various structural members were weakened to ensure that the craft would never fly again. Fortunately the alterations are not apparent to the display, and while there are two other Cobras in Australia, this is the only one with full armament. A heavily armed ground attack helicopter with single Lycoming T53-L-13 turbine engineused by the U.S. Army in Vietnam to support Australian & U.S. army ground operations. In addition to the M197 three barrelled 20mm Gatling gun, it carried eight anti-armour missiles and forty eight 2.75mm unguided air to ground rockets. This particular aircraft served in Vietnam from 1968 until 1971 and was damaged twice in combat. The aircraft is currently finished in a low visibility all-over mid green which includes the full US Army insignia and carries the Serial No. 69-15092helicopters, bell, weaponry, cobra, us military equipment, gunship

The Ovens pottery operated from 1881 to1892 they had taken over H L & E pottery at Beechworth in 1888 but mounting debts forced the Ovens company to close in 1892. During their short ten years of operation they produced stoneware garden urns, vases, cheese dishes, ginger beer bottles, butter coolers, water filters, wine and spirit barrels, bread plates, jugs, teapots, storage jars, pots, tiles, flower pots, spittoons, basins, bowls, demijohns, lidded crocks, pipes and bricks.A significant item made by an early Australian pottery in Beechworth Victoria, this company made many utilitarian items for the Victorian domestic market. It gives us today a snapshot into early Australian companies that were unable to sustain manufacturing their products into the 20th century, due in part to the rising imports of cheaper items from overseas.Red terracotta butter cooler comprising, round base with ridged lip, and bell shaped, domed lid with spherical handle on topMarked "Ovens Pottery, Co Ltd, Patd 1890, Beechworth" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, cooler, terracotta cooler, utensil, kitchen ware, terracotta, food container, food preservation, butter cooler, ovens pottery

The owner was Rita Fletcher; many locals and relatives inscribed their autographs , drew or painted pictures and , using their best calligraphy, wrote up humorous verses. In addition the book includes news clippings on the sensation of the day, the story “Will you be my woolly aphid?” which tells of a Harcourt youth who put a marriage proposal in a barrel of apples consigned to England. On receipt in England the note was published in the press The unfortunate youth received many hundreds of acceptances and became the butt of humorous verse in the English and Castlemaine newspapers.This volume is a treasury of autographs , humorous verse then fashionable and the repository of a funny yarn from pre-WW1.It appears to have been handed around the entire district and includes verses, signatures and sketches from nearly all of the inhabitants of Harcourt, Elphinstone and Canary island districtsA red leather bound autograph book with gold letter and design on the cover. Gold leaf edges, coloured pages with gold decoration. Autographs, sketches, watercolour paintings, press clippings Autograph Album

Knife cleaner, round wooden manual machine with 4 holes in top, each surrounded by metal fitting, handle attached to side of barrel, decorative metal stand with holes for fixing to banch. Black brush bristles are fitted inside, surrounding each hole (some bristles have been worn away. Inscribed "DAVIES PATENT EXCELSIOR LONDON", manufactured by Davis's Excelsior Knife Cleaning Company. Ltd, London. c.1877-1916Inscribed "DAVIES PATENT EXCELSIOR LONDON",flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, knife cleaner, knife cleaning machine, davis's knife cleaning machine co., domestic equipment, butchery, cleaning equipment