Eltham Community Festival awards. Awarded to the Shire of Eltham Historical Society for the most best Eltham theme Newsletter No. 33, November 1983 ELTHAM COMMUNITY FESTIVAL Despite the miserable weather, there was a good turnout. of members for the Festival parade. However the wet weather kept away many of our friends from the Victorian Folk Music Club who find it impossible to play in the rain. Thanks to those few who came along. We maintained out consistency by again collecting a Prize for our float- this time for the "Best Eltham Theme". Thanks to Dennis McKay for again providing his trailer for the float, and to Paul Sidwell for towing it with his Land Rover. As usual Joh Ebeli with some help from other members, was responsible for setting up the float. A successful display was held in the Eltham Community Centre on the theme of "Notable Local Residents" People featured in the display included pioneer settlers, Thomas Sweeney and Henry Hurst; founder of Brighton and later notable Eltham resident, Henry Dendy; former Shire Secretary and Engineer, Charles Wingrove; artists Walter Withers and Justus Jorgensen; parliamentarian Ewen Cameron; anthropologist, Dr. Donald Thomson; writer, Alan Marshall. Thanks are extended to Sigmund Jorgensen; Dorita Thomson and Peter Bassett-Smith for the loan of material for the display. Paper certificate printed with handwritten award nomination and categoryawards, eltham festival, rotary club of eltham, shire of eltham historical society, joh ebeli, peter bassett-smith

This ceramic soap dish was recovered from the wreck of the 1882-1883 George Roper between the late 1960’s to early 1970’s. It is one of the shipwreck artefacts in the John Chance Collection. Soap dishes were often part of a wash set that also included a water jug and wash bowl. The holes in the dish allowed water to drain out of the dish, keeping the soap dry for next use. The GEORGE ROPER 1882 - 1883 - The George Roper was a 4-masted iron sailing ship built in Liverpool, England, in 1882 for fast international trade with Australia. The large vessel was launched in February 1883. The ship was on its first trip, departing Liverpool for Melbourne, captained by John Ward and a crew of 31. She had almost reached her destination on July 4 1883, approaching Port Phillip Bay and being towed by the steam tug William. The weather changed to rough with fog and both the George Roper and the William hit the dangerous Lonsdale Reef at Port Phillip Heads. The Captain and crew were eventually rescued and taken to Queenscliff. Salvage syndicates were able to recover a lot of the cargo before the George Roper broke up and sank. Amongst the cargo was soft goods, draperies, household items, spirits of malt and distilled liquors, chemicals, dynamite, and 1,400 tons of steel rails for the Victorian Government. Also in the hold were Russell Stourbridge bricks, as paying ballast. This 1880s soap dish is an example of personal hygiene accessories and may have been part of a set comprising jug, bowl and dish.. The soap dish is also significant as it was recovered by John Chance, a diver from the wreck of the George Roper in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The soap dish is significant for its association with the barque George Roper, which is considered historically and archaeologically significant and as such, is listed on the Victorian Heritage Database, VHR S286. The George Roper is an example of a vessel built specifically for fast travel to and from Australia with a large shipment of cargo. Its cargo of steel rails adds to the historical significance of international trade to the growing colony of Australia and Victoria in particular, with rail transportation soon to become a faster and safer form of transportation between colonial towns. Divers can still access parts of the scattered wreck and other artefacts recovered in the 1970s and 1980s can be viewed in both public and private collections. Soap dish; glazed white porcelain. Round shallow bowl with blue patterned border, resembling butterflies. Two raised, concentric rings are moulded into the base. Six pierced holes are evenly spaced between the rings, five holes are in the centre of the dish.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, west coast trader, george roper, captain john ward, russell stourbridge bricks, port phillip heads, lonsdale reef, dive wreck, vhr s286, coastal trader, ceramic, vintage, personal hygiene, bathroom accessory, soap dish

The ship was built in 1953 by Ferguson Shipbuilders of Port Glasgow, Scotland for the Port Phillip Sea Pilots organisation as a pilot cutter. Her role as a pilot cutter was to sail with pilots on board to meet ships entering Port Phillip Bay. Pilots would be transferred by the Wyuna's workboat to the vessel requiring pilotage while it was stopped dead in the water, with shelter provided by the vessel itself. In the early 1970s the pilot service started using fast launches to allow pilots to board while ships were still underway, and in 1979 the Wyuna was sold to the Australian Maritime College in Launceston, Tasmania as a training vessel. She continued in that role until 2004 when sold to Mineralogy Pty Ltd as an accommodation vessel. In September 2013 she was donated to the Western Port Oberon Association for the Victorian Maritime Centre currently at Crib Point. For a time she was docked at Beauty Point, Tasmania, and after being refurbished for 18 months she was to be moved to Docklands in Melbourne, Victoria. After this berth became unavailable the vessel was docked at Inspection Head Wharf in Beauty Point. After a period there it was towed into Bell Bay where she lays at anchor as of January 2016. When funding becomes available the Western Port Oberon Association has plans to display the vessel in a wet berth alongside the former Royal Australian Navy Oberon-class submarine HMAS Otama.Mr Henry HudsonBlack and white photograph of the Pilot Tender MV Wyuna partially obscured by a large wave at the rip, entrance to Port Phillip Bay.mv wyuna, port phillip pilot service, the rip, the heads, queenscliff, point lonsdale

0007-013. Bream A Project , Bass Strait 1987. The project is just starting. This photograph shows Anchor Handling Tug Supply (AHTS) vessels Lady Lorraine, Lady Cynthia, and Lady Carojine, Anchor Handling Tug (AHT)Lady Florence, and Derrick Barge DB 29 alongside Barry Beach Marine Terminal, Gippsland, Victoria. The DB 21 is taking on board equipment for the project prior to be towed out and positioned at the location in Bass Strait where the production platform Bream A will be installed. 0007-014. Bream A Project , Bass Strait 1987. Derrick barge DB 29 loading project equipment with Lady Lorraine alongside Barry Beach Marine Terminal, Gippsland Victoria. Also alongside the wharf is the barge Intermac 256 which is being prepared to having the Bream A Jacket (a Jacket is the base of the platform that will be landed on the sea floor and will then be pinned in place with piles driven down into the sea bed). 0007-017. Bream A Project , Bass Strait 1987. Helicopter on DB 29 helipad ready for take off with Lady Lorraine, Lady Gay and Lady Cynthia at Barry Beach Marine Terminal, Gippsland, Victoria. 0007-016. Bream A Project , Bass Strait 1987. Helicopter taking off from DB 29 with Lady Lorraine and Lady Gay at Barry Beach Marine Terminal, Gippsland, Victoria.Green, with gold border trimming photo album, containing 38 photographs depicting ships, barges and the construction of the Bream A oil and gas production platform in Bass Strait, Victoria, Australia 1987.

Rawleigh's Ready Relief was advertised for checking and relieving head colds and catarrh. W. T. Rawleighs Co Ltd was a Canadian firm who expanded their food manufacturing business to Australia in 1928. In 1934 they purchased land in Dawson Road, Brunswick and built a five storey brick and reinforced factory. The building was still standing in 2022.Clear glass bottle with white plastic screw on lid. Paper wrap around label printed in green, black and pinkFRONT: Rawleigh's Ready Relief as an aromatic inhalation Net 30 ml W. T. Rawleigh Co Ltd. 60 Dawson St. Brunswick Victoria, 3056. LEFT SIDE: Active Constituents % w/w Alcohol 57.571, Camphor Crystals 4.789, Menthol Crystals 10.200, Menthol Liquid 5.100, Oil of Lavender 50% 18.124 Oil of Pinus Pumilous 0.786, Oil of Eucalyptus 0.180, Musc Ambrette Solution 0.20, Dist. Water 3.00. Reg. Vic 18810 E2012 RIGHT SIDE: Directions: Place drop or tow on folded handkerchief. Inhale gently, then gradually deepen inhalation. At night put a few drops at end of pillow. Not recommended for children under three years. Keep tightly closed. Store in cool place.medical, rawleighs co ltd, brunswick

This photograph was taken of the debutantes and their partners presented at the annual debutante ball.This photograph is significant for its links to the Chinese Young League. The League was formally established on 4 October 1932 to to promote free social intercourse and goodwill among its members and their mutual improvement. Membership was open to all persons, with one or both parents or grandparents born in China. Wives of Chinese members were permitted as members with the same privileges. It was a significant social organisation for Chinese-Australians in Melbourne in the mid to late twentieth century.Laminated black and white photographic print (copy print) on card. Front of card, top centre: 'Young Chinese League debutante set 1938'. Front of card, bottom centre. 'Back row: Claude WONG HEE, Jack GOON, Arthur WHEE, Gordon NAM, Gordon LOUEY, Owen YOUNG, Stanley AH MOUY, Harold KONG, Dennis QUON, G TYE DIN, Harold MEW. Next Row: Linda YOUNG, Doris WHEE, Rose YIN, Phyllis POON, Violet TOW, Thelma WING JAN, Kim SHEE, Violet LOUEY, Eunice CHIN, Edna KONG, Betty WHEE, Jean LIM, Norma YOUNG'. Back of card, top right hand corner. Number '1938' has been written in blue pen. Sticker text 'P735 (another version = P587) 93.2.1'.young chinese league, debutante balls, melbourne

Set of 11 No. 35mm Agfa colour blue and white plastic mount slide - of the move of Ballarat trams 27, 28 and 14 from the old SEC depot onto the temporary access track to the BTPS depot on Saturday 15 July 1972 and Sunday 16 July 1972 (slides .10 and .11) .1 - John Withers and his land rover, towing No. 14 from the old depot - depot junction. .2 - No. 27 moves from Wendouree Parade onto the depot access track. .3 - ditto .4 - and onto the access track being pushed by hand. .5 - No. 28 being lifted onto the steel channels in order to slew it across Wendouree Parade .6 - being slewed across the road .7 - being readied to lift up onto the access track .8 - all three trams on the access track that evening. .9 - ditto Taken on 16 July 1972 .10 - No. 27 being winched up to the level crossing - Campbell Duncan ? on the winch. Note the mud! .11 - No. 14 being winched up the temporary access track - Rolf Jinks on the Winch. See Fares Please!, September 1972. tramways, trams, depot, btps, moving trams, wendouree parade, tram 27, tram 14, tram 28

1950 decade HAY FORK - A local invention. Bill and Arthur Gillespie and Bon Barrie In the early 1950’s Bill Gillespie of Bulmans Lane had been experimenting in developing a machine to improve the collection of hay sheaves at harvesting and stack building time. The ripened crop was cut by a reaper and binder which bundled the storks into sheaves tied with binder twine. The reaper and binder was towed by a tractor by the mid 1940s previously teams of draught horses were used to pull the reaper and binder. A photograph taken at the Barrie farm shows three binders the first being towed with a tractor and the others with horse teams. Two workmen were needed to operate the binder when cutting a crop. The sheaves collected on the binder and released onto the ground and were scattered across the paddocks. Using a conventional two pronged pitch fork the harvest hands collected the sheaves and placed each one cut edge on the ground in an upright position and layered with about 15 sheaves into an apex shape to form was is known as a stook. The shape of the stook allowed for drying and draining of water if rain had occurred. Prior to the invention of the mechanical hayfork this was a laborious task requiring each sheaf to be pitched onto a tray truck and moved to the location of the haystack. The mechanised HAYFORK was operated by one person on tractor greatly reducing the need for gangs of labourers. At harvest time farmers had relied on itinerant teams of workers descending on the district looking for work. The three Barrie brothers on their adjoining farms combined forces to cut their crop at its optimum time while the weather was in their favour. Up to many 20 workers at times formed a team in earlier times. Agricultural university students were also keen to gain practical experience in the field. Each of the brothers had a particular skill, and Tom Barrie was the expert on stack building. The district haystacks had a distinctive shape and could be recognised by their builder. Bill Gillespie’s first operational HAY FORK consisted of a large 13 pronged fork situated forward of the truck cabin. It was attached with iron girders and mounted on the rear of the cabin to the tray of his British Bedford truck. It was constructed in metal and iron and welded in the farmers work sheds. The mechanism was raised and lowered by the driver scooping along the ground to pick up a complete stook to raise high enough to deposit all the sheaves in one stook onto the stack or truck tray. The fork section was released by a rope and operated by the driver in the cabin. This model was trialled on the Barrie farm at Ferris Lane. It proved to be very successful and the Barrie/ Gillespie brothers went on to develop a HAYFORK which attached to a tractor and was operated with a series of levers and was raised and lowered hydraulically. It was detached from the tractor when stacking was completed. In its early days farmers travelling along the Western Highway called at the Barrie farm at Ferris Lane to inspect its construction and operation of the invention. It became a widely adopted by farmers throughout the State. It was being used on Wattie Palmer’s farm on Bridge Road Melton South in 1997. Farming in Melton, hay growing and stack building. agriculture, local identities

Set of three photographs of Geelong single trams, one of the same type of tram (No. 7) prior to fitting with marker lights and No. 4 after fitting with marker lights, one during daylight and one at night. Three photographs taken by W.C. Meyer, Photographer, 333 Myers St. East Geelong, Phone 3289. Photo of one end of the tram only. Note top marker lights, not repeated on any other cars shown in photographs in Destination Eaglehawk. Shows as well, arrangements for tow bars, mirror and handrails. 1872.1 - Before fitting with additional lights, at night with 'flash' - showing destination 'West' - tram No. 7 1872.2 - after fitting with lights and stripes, during daylight - showing destination 'CITY' - tram No. 4 1872.3 - ditto at night, showing destination of 'CITY'. - tram No. 4 1872i4 - close up of the mirror and light on the roof - right hand side of i2. Note all lights illuminated in the night photo. Destination Eaglehawk, page 44, notes tram 4 as being fitted with dash canopy lighting and zebra stripes in 1955. No mention of No. 7 being so fitted. For date of photograph, assumed early 1955 at this time (14/11/2001) See Destination EaglehawkAll stamped with black ink stamp " W.C. Meyer, Photographer, 333 Myers St. East Geelong, Phone 3289" and on rear of photos in dark blue ink, handwriting, 1872.1 - Night - with 'flash' photo. 1872.2 - Daylight 1872.3 - Night - with 'flash' photo. This tram has supplementary lights trams, tramways, geelong, dash canopy lights, lights, mirrors, tram 7, tram 4

Built in 1866 in Echuca, the PS Adelaide is the oldest wooden hulled paddle steamer still operating as a passenger vessel in the world. Engines made in Melbourne by Fulton and Shaw. JG Grassie was the original owner who was looking for a wool carrying boat as a commercial venture with the arrival of the rail at the Port of Echuca making the future look bright. Seutonius and Charles Officer of Murray Downs Station joined Grassie in financing the venture and they used the boat for 6 years before David Blair and partners (Echuca sawmillers) bought the Adelaide in July of 1872 and she began her long working life as a logging boat providing a shuttle service between the forests around Barmah and the mill, usually towing up to 3 or 4 barges. The paddle boxes were rebuilt from round to a square configuration in approximately 1924 by Charles Felshaw, local Echuca shipwright. The Adelaide had unusual strength for her size. Her career ended in the mid 1950s where she lay idle tied up near the mill at Echuca wharf. For a short time she was sold to Mildura but fortunately the Apex Club raised funds to buy her back to be a reminder of the riverboat days at the Port. She was lifted out for safekeeping into Hopwood Gardens where she remained on show for nearly 25 years. After restoration by Port shipwright Keven Hutchinson OAM, she returned to the waters of the Murray River on Sunday March 4th 1984 at 5.20pm. After further restoration, in 1985 the Prince and Princess of Wales re-commissioned PS ADELAIDE in a ceremony on their tour of the region. The world's oldest wooden hulled paddle steamer still operating as a passenger vessel today built in Echuca in 1866. It is often considered the flagship of the operational fleet of the Port of Echuca given its age and known provenance to Echuca. The Adelaide is an iconic symbol of the riverboat timber and cargo trade that worked on the Murray River from the mid 1800s. Remarkably, PS ADELAIDE still operates with its original Fulton and Shaw engines.Composite hull, side wheeler with two single cylinder steam engines, producing a total of 36hp. Currently cream and burgundy moored at the Echuca Wharf. 49 passenger capacity.P.S. Adelaide signage on wheelhouse and port and starboard bow.p.s. adelaide, paddle steamers, echuca boat builders, charles felshaw

Dick Lee is a prolific Group 1 winning trainer and driver, successful breeder and owner, International and trotting pioneer, outstanding administrator and tireless volunteer. Dick Lee, son of a soldier-settler was a track ranger at the Melbourne Showgrounds before accepting a position as a private trainer in the emerging trotting industry in Wales, taking a team of horses to the UK where he had 105 drives for 29 wins. The adventure would also see him compete in Holland, Germany, Sweden, Belgium, Russia and the US, always with trotters. He returned to Australia in 1970 with “a wife, a trainer-driver premiership, half-a-dozen miniature Irish donkeys and a horse in tow”. The horse, Hermes, would sire 1976 Melbourne Cup winner Van Der Hum. Dick served 12 years as president of the Victorian Square Trotters Association to advocate for the gait. Emerging from this time are: 1985 The Redwood Classic for 2yo trotters 1996 the first all-trotting card, the Redwood Day at Maryborough. Dick Lee’s training and driving produced among others: Bendigo and Melbourne Pacing Cups winner Rhodonite Australian Trotters of the Year Hampdens Pride and Game Ebony V L Dullard Cup winners Glenfield Girl and Game Ebony Rufus Youngblood, whose racing career included 32 wins, 23 seconds and 18 thirds from 139 starts, the first Australian-bred horse to win four Derbies and Australian Horse of the Year in 1987. Dick Lee was inducted into the Victorian Harness Racing Hall of Fame in 2019White race colours with purple triangle pointing upbendigo, bendigo cup, lord's raceway, dick lee, rhodonite, bendigo harness racing club, bhrc, race colour, hall of fame, ir (dick) lee, ir lee

Contents: 1. Letter from Peter Dousset of Collaroy Plateau, NSW, Nov. 1983. Provides brief history of family origins in district. Grandfather was a French migrant who married an Australian woman in 1883 in Panton Hill and had four boys and two girls. Father worked for Ryan's Butcher shop in Panton Hill for many years. Parents retired to Hillside Avenue Eltham. Mother was kiiled by Burgoyne's truck in 1970 outside the Burgoyne shop (Inquest held Melbourne, 16 Dec 1970 VPRS 24/P0002, 1970/2408). Peter Dousset opened a garage in Research in 1948 with Kevin Brinkkotter and they started the Research Fire Brigade using his breakdown truck towing a water trailer. 2. Copy of death certificate, Ernest Pierre Dousset 13 May 1963 (VIC 9061/63), son of Pierre Francois Dousset and Christina Dousset (nee Newlands), buried Smiths Gully Cemetery (Queenstown Cemetery) 3. Copy of death certificate, Gladys Dousset (nee Stutley), 12 Oct 1970 (VIC 885/71), daughter of Alfred Stutley and Ester Stutley (nee Thomas) 4. Copy of six pages extracted from an autobiography written by Peter Dousset 5. Copy of photo taken 1912 outside the Panton Hill Hotel with Peter Dousset's grandparents on the right side 6. Copy of photo of the Dousset family home in Panton Hill 7. Copy of vaccination certificate of Pierre Dousset aged 6 months at Panton Hill, 26 October 1897 [Items 2-7 are digital file copies only] Folder of information on Peter Dousset and ancestors, Panton Hill and Researchpeter dousset, burgoyne's shop, eltham, kevin brinkkotter, panton hill, research (vic.), research fire brigade, ryan's butcher shop, panton hill hotel, hillside avenue, alfred stutley, christina dousset (nee newlands), ernest pierre dousset, ester stutley (nee thomas), gladys dousset (nee stutley), pierre francois dousset, queenstown cemetery, smith's gully cemetery

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612The artefact is a small piece of wood that was broken from the timbers of the shipwreck of the SCHOMBERG (1855) and carried by the eastern currents to New Zealand (1875). It has 2 drilled holes that show faint screw marks and no metallic residue (possibly for patent treenails). The top surface is rounded, of a dark colour, and showing clear grains that have been worn smooth by the action of the sea. There is a reddish stain on the timber where breakage has occurred. The wood appears to have been strong in its original condition but is now light to lift and soft and crumbly at its exposed edges. The artefact is in fragile condition.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612A small piece of wood broken from the timbers of the shipwrecked clipper SCHOMBERG (1855, Peterborough) and retrieved from the southwest coast of New Zealand’s South Island. The artefact bears a reddish stain on exposed parts but the main surface is grey coloured. It appears to have been split off other wood fragments in the Flagstaff Hill collection (6257, 6259). It presents as a lighter less dense wood than oak, but may have lost mass through submersion.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

This timber fragment is from the shipwreck of the SCHOMBERG (1855). The bow of the ship broke off after an unsuccessful salvage attempt to tow her off the Peterborough reef. At the wreck-site the submerged hull points north towards the beach but the front section is missing. Parts of the bow have been carried away by the eastward bearing ocean currents and have come ashore on the western coast of New Zealand’s South Island. Don Charlwood writes in Wrecks & Reputations (1977) that in 1871 “a piece of wreckage over 20 feet long and 12 feet wide was brought out” by land from its remote location at Tauperika Creek. In 1875 “an even larger section was brought out by sea”. It was suggested at the time that these relics of a large wooden sailing ship were from the wreck of the SCHOMBERG some 20 years earlier on the Victorian coast. “To corroborate the theory”, Charlwood continues, “a piece was sent to Halls of Aberdeen [the ship’s builders in Scotland]. They identified it as having come from the ship they had launched with such pride in 1852.” Charlwood, whose great-grandparents were passengers on the SCHOMBERG’s fateful maiden voyage, acquired some samples of the wreckage timber recovered in New Zealand, and brought them back with him to Australia. In 1976 “comparison was made of timbers from the New Zealand find and timber from the remains of the hull at Peterborough. They proved to be from the same ship.” The extraordinary journey of these pieces of wood from the once mighty clipper ship SCHOMBERG came to an end in 1984, when they were given to Flagstaff Hill by the author, and reunited with other shipwreck timbers and copper bolts from the vessel that are on display at the Maritime Village. The shipwreck of the SCHOMBERG is of State significance - Victorian Heritage Register S612A piece of wood broken from the timbers of the shipwrecked SCHOMBERG (1855, Peterborough) and retrieved from the southwest coast of New Zealand’s South Island. The artefact is a light grey colour with plain long grain and bears a reddish stain on parts. Part of a drilled hole is red stained with traces of corroded metal still evident. The piece appears to have split off from other fragments that are in the Flagstaff Hill collection (6257, 6258) and it is in fragile condition.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwreck timber, don charlwood, ‘wrecks & reputations’

This ceramic cover was recovered from the wreck of the 1882-1883 George Roper between the late 1960’s to early 1970’s. It is one of the shipwreck artefacts in the John Chance Collection. The purpose of the cover is unclear. The holes could be for ventilation. The cover may have been used to protect food or keep it at an even temperature. It may also have been used for covering fragrant petals, allowing some scent to escape through the holes. The residue around the underside of the holes and their random placement indicate that the cover could be partially handmade. The discolouration could have come from its time in the sea. The GEORGE ROPER 1882 - 1883 - The George Roper was a 4-masted iron sailing ship built in Liverpool, England, in 1882 for fast international trade with Australia. The large vessel was launched in February 1883. The ship was on its first trip, departing Liverpool for Melbourne, captained by John Ward and a crew of 31. She had almost reached her destination on July 4 1883, approaching Port Phillip Bay and being towed by the steam tug William. The weather changed to rough with fog and both the George Roper and the William hit the dangerous Lonsdale Reef at Port Phillip Heads. The Captain and crew were eventually rescued and taken to Queenscliff. Salvage syndicates were able to recover a lot of the cargo before the George Roper broke up and sank. Amongst the cargo was soft goods, draperies, household items, spirits of malt and distilled liquors, chemicals, dynamite, and 1,400 tons of steel rails for the Victorian Government. Also in the hold were Russell Stourbridge bricks, as paying ballast. The ventilated cover is as an example of domestic ceramic ware of the 1880s. The cover also holds significance as it was recovered by John Chance, a diver from the wreck of the George Groper in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The George Roper is considered historically and archaeologically significant and as such, is listed on the Victorian Heritage Database, VHR S286. It is an example of a vessel built specifically for fast travel to and from Australia with a large shipment of cargo. The George Roper’s cargo of steel rails adds to the historical significance of international trade to the growing colony of Australia and Victoria in particular, with rail transportation soon to become a faster and safer form of transportation between colonial towns. Divers can still access parts of the scattered wreck and other artefacts recovered in the 1970s and 1980s can be viewed in both public and private collections. Cover; unglazed white ceramic, oval shape. The cover has holes randomly poked through its surface, one large hole is a six pointed star shape. Underneath there is a narrow rim placed slightly inside the edge. There is residue on the underneath around the holes. There is orange-brown discolouration and areas where the surface is lighter coloured. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, west coast trader, george roper, w. h. potter & sons, w.t. dickson and son, captain john ward, russell stourbridge bricks, port phillip heads, lonsdale reef, dive wreck, vhr s286, coastal trader, ceramic, vintage, ventilated cover, domestic item

Set of 7 transparencies taken undated (appear to be 1970 or 71) on PAKON mounts. Also possibly copy slides as quality is poorish. 1175.1 - No. 27 has derailed at Depot, across Wendouree Parade, and No. 33 appears to be about to try and tow it back on. Wendouree Parade totally blocked. Adjacent pole has tram stop sign and has "Stafford Court" street sign mounted on it. 1175.2 - No. 43 at corner of Drummond St. South and Dana Street, with destination Lydiard St. North. 1175.3 - No. 42 (Mt Pleasant) and 21 (Gardens via Sturt St. West) crossing at Gardens Loop. 1175.4 - No. 42 bound for Lydiard St. Nth at intersection with Macarthur St. Shows the retaining wall for the cutting on the east side of Lydiard St. Nth. 1175.5 - No. 43 at corner of Lydiard St and Sturt St., at city terminus showing "Special" and tram 35 adjacent to Post Office in Lydiard St. Nth. Photo shows the small tram stop pole at this location and Post Office building. 1175.6 - No. 39 and 26 and 27 at the Mt Pleasant terminus. Near closure as a bus stop sign has been positioned on the west side of the road. No. 39 showing destination of "Gardens via Sturt St. West" 1175.7 - Nos 21 and 34 crossing at the Grant St. loop in Barkly St. 21 has destination of Mt Pleasant, while 34, - Gardens via Sturt St. West"All information on typed small white labels, on the top of the slides using black ink. 1175.1 - "27 derailed and 33 at depot" 1175.2 - "43 at cnr Drummond & Dana Sts" 1175.3 - "21 and 42 Gardens Terminus" 1175.4 - "42 at cnr Macarthur & Lydiard" 1175.5 - "43 & 35 at Post Office" 1175.6 - "39, 26 and 27 at Mt Pleasant" 1175.7 - "21 & 34 at Grant St"tramways, trams, wendouree parade, depot, accidents, derailments, drummond st. sth, gardens loop, post office, mt pleasant, grant st., tram 21, tram 26, tram 27, tram 33, tram 35, tram 42, tram 43

This black and white photograph of the tugboat NYORA towing the steam ship INVERNESS-SHIRE was taken between 1915, when the INVERNESS-SHIRE was dis-masted, and 9the July 1917, when NYORA tragically sank. The sailing ship INVERNESS-SHIRE was a four masted steel barque built in 1894 by Robert Duncan & Co. Limited, Glasgow, U.K. (The supervising engineer during the building was William Cumming. He accompanied every ship he’d built on their maiden voyages from UK to Melbourne.) In 1916 she was purchased by A/S Christiansand (Sven O. Stray), Kristiansand, Norway and renamed SVARTSKOG. In October 1920 she disappeared at sea, carrying a cargo of coal, and all hands were lost. The steam powered NYORA was a powerful tugboat and a salvage vessel built by J.P. Rennoldson & Sons Ltd, South Shields, Tyne and Wear, UK. She was originally launched with the name NEPEAN in May 1909, then as NYORA in August 1909 and registered in Melbourne in November 1909 by owners Huddart Parker Pty Ltd. She was made of steel, had triple-compounded steam engines, and her dimensions were 306 ton, 135.0 x 25.1 x 13.6ft. The Melbourne tug NYORA was known as “one of the best known tugs in Victoria, and carried the latest appliances for firefighting and salvage purposes.” She serviced the Port of Melbourne for most of her career. In July 1917 NYORA was towing the American schooner ASTORIA from Port Pirie to Sydney, because ASTORIA’s engines had broken down; she had been delivering a large cargo of timber. On July 9th the vessels were two days out from Port Pirie. At 10:30am NYORA foundered after casting off at Cape Jaffa, 50 miles south of Kingston, South Australia, and sank. Only 2 of the 16 crew survived; NYORA’s Master, Captain W.M. McBain (William Murray) and helmsman, able seaman Gordon Lansley. They were rescued by the two Cape Jaffa light keepers, Jamieson & Clark, who launched the rescue from the Cape Jaffa lighthouse on Margaret Brock Reef. Both men were brought to the lighthouse keeper’s cottage where they recuperated after their long exposure to the rough. (The Queenscliff Sentinal of 14th July 1917 noted that both saved men originated from the same district; Gordon Lansley was from Queenscliff and Captain McBain formerly from Point Lonsdale.) The ASTORIA was “in a very dangerous position ten miles west of the Margaret Brock reef near the Cape Jaffa lighthouse, setting towards the land.” Captain Solly from Beachport later said “Owing to the position … the ship was very fortunate in making Guichen Bay in safety, as she did” (Guichen Bay is south of Robe). Captain Bull, manager of Huddart Packer Pty Ltd, NYORA’s owner, was unable to see any reason for the foundering, as the NYORA was well known for its seaworthiness. At a hearing later on, the Marine Board could blame on no-one either, but found that the ship had been swamped by heavy seas, and had listed to one side when a load of 40 tons of coal in sacks on her deck shifted. The tow line to the ASTORIA was cut to try and save the tug but a huge wave swamped her, crashed open the engine room door and flooded the compartment. It was impossible to launch the lifeboats due to the listing of the sea and NYORA sank within 15 minutes. There was some criticism of the length of time it took Captain Solly and the lifeboat crew to get from Beachport to Cape Jaffa to help with the rescue. However, they had great difficulty in the very strong seas, taking 9 hours just to reach Robe, which was only 32 miles away. There they filled the tanks with ample benzene for the task ahead (impossible to do at sea at the time), took in food and brought on board the Robe Harbour Master, Mr Sneath. The Harbour Master was then able to safely pilot the lifeboat to Cape Jaffa in the smoother coastal waters, saving very much time, but by the time they arrived at Cape Jaffa the 2 survivors had already been taken to the lighthouse on the mainland. There was also a question as to the chances of the ship ASTORIA lowering a lifeboat to help with the disaster. Captain Solly explained that it would have been impossible without sacrificing the lives of the lifeboat crew , due to the great height of the ship out of the water and the roughness of the sea. Captain Svenson, of the ASTORIA, said himself “We are ourselves in a helpless position” and “"Cannot see anything of lifeboats”. One of the 14 lost crew of the NYORA was Hugh Edwards, whose body was not recovered. The descendants of Captain William McBain have continued the seafaring heritage. His son was also a tugboat captain (Captain Norman Clive McBain), working mostly from Reid Street Pier, Williamstown, who would often take his own grandson out to sea to spend time with him on his tugboat. Now that grandson has built a tugboat in memory of his heritage and spends time in it with his own grandson. The Cape Jaffa original lighthouse has been dismantled and moved to Kingston and is now a Lighthouse Museum. The attached photographs of Margaret Brock Reef, and the Cape Jaffa Lighthourse keeper's cottage (now in ruins) is courtesy of Capt. William McBain's great grandson, who visited the area in 2015. There is a model of the NYORA in Museum Victoria, donated by Huddart Packer & Co Ltd. in 1937. This photograph is significant for its association with the tugboat NYORA, that is part of the seafaring history of the Port of Melbourne and associated Victorian ports. Black and White photograph of the tugboat NYORA and steam ship INVERNESS-SHIRE. C. 1915-1917.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, historic maritime photograph, lighthouses, shipwrecks, steamships, j.p. rennoldson & sons ltd, huddart parker pty ltd, nepean, nyora, inverness-shire, astoria, captain w.m. mcbain, william cummings supervising engineer, cape jaffa lighthouse, beachport lifeboat, captain solly, captain svenson, margaret brock reef

Martin Romuld was born near Trondheim in Norway on September 26, 1905. He started jumping on skis at age 6 or 7 and became very good at it. He completed his degree in Civil Engineering at the University of Trondheim and decided to come to Australia. He arrived on 7 March 1928 and found a job with the SEC. The SEC wanted to investigate the possibility of a hydrological surveys necessary to determine the flow of water over a period of years. These surveys started in 1934 and continued until 1941. He lived at Wilkinson’s hut for most of the time during those years both in summer and winter. In his role with the SEC, Martin visited all the various creeks to measure water flow rates as often as was necessary. These skis were used on his winter rounds during the time he spent in the area. Martin also competed in skiing during the 1930s. He won the combined Australian title 3 or 4 times. He was unbeatable in cross country, probably due to the continual practice in his job. Before migrating to Australia, Martin had been runner up in the 1926 European Jump Championships held in France. Jumping was his favourite thrill and he would often construct a jump for practice near the Scout Hut (or Rover Chalet) quite near to Wilkinson’s. In 1941 Martin joined the Royal Australian Air Force and after the War skied mainly at Mt Buller. He maintained his involvement in competitive skiing as an official. In 1958 Martin was the main judge of the National jump which was held to the left of the Nissen tow. He also designed the jumping course at the Donna Buang snow fields. Martin Romuld was Co Vice-President of the Federation of Victorian Ski Clubs in 1949, along with Tom Mitchell M.L.A. Martin Romuld died on 14 July 1998 in Prahran, Victoria,These skis are significant because they belonged to a pioneer of Falls Creek and the sport of skiing in Australia.A set of skis made for Martin Romuld. They are made from American hickory which arrived in Australia via Norway in October 1933. Andy Broad made the skis and they were furnished with steel edges. There was enough hickory for 18 pairs of skis and a pair of competition cross country skis were also made for Martin Romuld. martin romuld', falls creek pioneers, australian skiing history

Mavis Grace Lindsay born in 1917 and married Toni St. Elmo in Ballarat on 18 December 1944. She was known as “Skippy” from childhood. They moved from Melbourne in 1945 and spent the year living in Wallace’s Hut. Toni was employed by the State Electricity Commission to record weather-related data. They were to become responsible for early developments at the Falls Creek resort and for promoting a love of skiing. Toni taught Skippy to ski and she practised on the High Plains where she and her husband lived. Toni entering her in the first club championships held by the Bogong Ski Club at Rocky Valley, which he had established. Skippy St Elmo won many ski races during the 1950s and represented Australia in New Zealand. In 1947, the first ski lodge was built by six SEC employees including Toni St Elmo. The lodge was named “Skyline”. In 1957, Toni was involved in building the first rope tow at Falls Creek, called Nissen. He also established the Nissen Ski School. In 1949, Skippy won the Downhill and Combined State Championship held at Mt Buller. In 1950, Skippy was selected to compete in New Zealand with the Victorian team. Skippy trained with the men at the Bogong Ski Club which became a talking point in 1953 when the Albury Ski Club held an Open Championship and Skippy won in the Giant Slalom and Downhill. She went on to win many more races. In 1960, Skippy and Toni said farewell to Falls Creek. Skippy passed away in Queensland in July 2005 and Toni passed away in September of the same year. In November 2006 they were honoured at the Alpine Village at Falls Creek by the spreading of their ashes over Eagle Rock.A black and white photograph of Skippy and Toni St. Elmo standing in the doorway of their hut on the Bogong High Plains. A line of washing stretches behind the hut connected to the outside toilet.skippy st. elmo, toni st. elmo, sec hut skippy and toni st. elmo

Mavis Grace Lindsay born in 1917 and married Tony St. Elmo in Ballarat on 18 December 1944. She was known as “Skippy” from childhood. They moved from Melbourne in 1945 and spent the year living in Wallace’s Hut. Toni was employed by the State Electricity Commission to record weather-related data. They were to become responsible for early developments at the Falls Creek resort and for promoting a love of skiing. Toni taught Skippy to ski and she practised on the High Plains where she and her husband lived. entering her in the first club championships held by the Bogong Ski Club at Rocky Valley, which he had established. Skippy St Elmo won many ski races during the 1950’s and represented Australia in New Zealand. In 1947, the first ski lodge was built by six SEC employees including Toni St Elmo. The lodge was named “Skyline”. In 1957, Toni was involved in building the first rope tow at Falls Creek, called Nissen. He also established the Nissen Ski School. In 1949, Skippy won the Downhill and Combined State Championship held at Mt Buller. In 1950, Skippy was selected to compete in New Zealand with the Victorian team to compete in New Zealand Skippy trained with the men at the Bogong Ski Club and that fact became a talking point in 1953 when the Albury Ski Club held an Open Championship and Skippy won in giant slalom and downhill. She went on to win many more races. In 1960, Skippy and Toni said farewell to Falls Creek. Skippy passed away in Queensland in July 2005 and Toni passed away in the September of the same year. In November 2006 the pair was honoured at the Alpine Village at Falls Creek by the spreading of their ashes over Eagle Rock.Photograph of Ms Skippy Elmo and man at Bogong High Plains on August 25 1945 as well as a framed receipt for the Ski Club of Victoria Junior Test for Ski Instructorsskippy st elmo, skyline lodge, bogong high plains, ski instructor test

Yields information about the transport of the SEC Jelbart Road Roller from the depot and then to the TMSV at Bylands. Has a strong association with Doug WisemanSet of 14 AGFA slides - blue and white plastic mounts and 6 white cardboard slides - 3 Kodachrome and 3 unmarked of the SEC Jelbart Road Roller being transported to Yendon by Doug Wiseman - September or October 1971 and then being transported to TMSV at Bylands early 1973. .1 - Doug Wiseman preparing the roller with his two sons? standing in front. .2 - Prepare to leave the SEC Depot with one of the two work huts in tow. .3 - Leaving the depot .4 - at Ballarat East station .5 - in the suburbs .6 - on the way to Yendon .7 - ditto .8 - ditto .9 - ditto .10 - ditto .11 - arriving at Doug Wiseman's farm. .12 - Family photos with the roller .13 - ditto .14 - Doug Wiseman standing in front of the roller .15 - loaded onto the truck for Bylands .16 - Family photos with the roller .17 - Family photos with the roller .18 - At Bylands .19 - ditto with family .20 - ditto with cable trailer in background. Photo from the collection of Lilian Butler. Advised by E-mail by Graeme Jordan 23-10-2016 "Not sure of the details, but I know Doug Wiseman was involved. According to Running Journal at the time, the roller was considered for preservation at the time of closure, but finances at the time prevented this. However it was "officially" acquired and added to the TMSV collection in early 1973. I further believe that TMSV advised the SEC that if funding was available to move the vehicle to Bylands, then it would take it. Doug Wiseman agreed to store the roller on his Yendon property." ballarat, tramways, trams, jelbart, road roller, bylands, tmsv, jelbart

The 1982 Ford V6 engine, built at the Ford Essex Engine Plant at Windsor in Ontario Canada, was released by Ford for installation in a number of car and light truck models manufactured in Canada, United States, Mexico and Venezula. Production probably exceeded 7 million items. The Australian Gliding Museum’s exhibit was an engine converted for aircraft use that was bought for the Gliding Federation of Australia “Auto-Tug” program from Javelin Aircraft Company in Wichita in USA. “Auto-Tug” was an experimental program sponsored by the Gliding Federation of Australia to equip a glider – sailplane Piper Pawnee PA-25-150 tug with a water-cooled engine to alleviate the costs of running and maintaining the Lycoming engines fitted to Pawnee tugs in Australia. The program began in 1988 and was aimed at obtaining limited certification for converting dedicated glider – sailplane tow planes. The engine equipped with modified intake manifolds produced 198 hp for flight with the same propeller RPM for take-off as the original Lycoming 0-540 engine. However, fuel consumption was halved as the water cooling of the Ford engine enabled quicker descents with throttle closed following the release of the sailplane. Based on the results of GFA’s program, CASA concluded that engine was quite suitable for an aircraft installation and rated it more reliable than the equivalent Lycoming and Continental aircraft engine. The use of the 1982 Ford V6 engine type for Pawnee tug conversions was discontinued when the General Motors LS1 5.7 litre V8 became available. It is understood that a small number of conversions have been done using the LS1 engine. This brief history is based on information obtained from Mike Burns and David Sharples who were involved in the Auto-Tug program from 1988 to 1992. Technical information relating to the 1982 Ford V6 automotive engine is contained in a paper by D.L. Armstrong and G.F. Stirrat of the Engine Engineering Office at Ford. Indicative of technological experimentation in the sport of glidingFord auto engine mounted on mobile standaustralian gliding, glider, sailplane, auto-tug, pawnee, tug, auto, engine, motor, ford, gliding federation of australia, burns, sharples.

In 1961 the Falls Creek Tourist Area Management Committee determined that there should be only one approved Ski School in the Tourist Area. The franchise for 1961 was granted to Alpine Developments Pty. Ltd', which also had the franchise for Tow Bar operations. The Ski School headquarters were based at the canteen adjacent to the T-Bar drive station. The Management Committee also determined that "No person shall be permitted to give instruction in skiing for any money or material consideration without the prior approval of the Management Committee". The Alpine Developments franchise was extended for the 1963, 1964 & 1965 seasons. In August 1964, the Committee declared that it was satisfied with the present Ski School operated by Alpine Developments, and is most anxious to retain it at Fells Creek. They declared that they were particularly happy with the standard of teaching and control achieved by the School director, Mr. Siegfried Haberzettl, who was at the resort for his fifth year, and to whose leadership and direction the success of the School was largely due. The Committee therefore arranged to extend the franchise for a further three years after 1965, and thereafter the franchise was to be continuous on twelve months' notice of termination from either party. In the 1960s and 1970s, the majority of Ski Instructors were Austrian. Lorna Clarke was one of the first Australians to gain the highest Austrian qualification, the Staatlicher Bundessportheim. She was employed at the Falls Creek Ski School in 1964. In the 1980s there was a push for more Instructor training to take place in Australia to enable local instructors to gain higher qualifications without having to travel to Europe. During this period, George Pirmoser and later Brad Spalding were Ski School Directors and Bridgford was the still the owner of Alpine Developments (Holdings) Pty. Ltd. continued to push for training of Australian instructors. Brad Spalding took over as Ski School Director in 1986 and along with his partner, Melissa Landregger developed a wide range of programs including children’s and women’s programs, private lessons and multi-day clinics for which Falls Creek Ski School is renowned until the present.This image is significant because it depicts some of the early instructors at Falls Creek Ski School.A coloured photo of a group of instructors at Falls Creek Ski School. On left Siggy Haberzettl, on right Lorna Clark. Siggy (Sigi) Haberzettl was the Ski School Director in the 1960s and Lorna was the first Australian instructor to be employed by the Falls Creek Ski School in 1964.falls creek ski school, brad spalding, lorna clarke, siegfried haberzettl

Thomas Walker & Son was internationally renowned in the manufacturing of ships logs, founding father, Thomas Walker (1805–1871), an engineer in Birmingham, patented a mechanical log in 1878 which was a recording instrument that attached to a rail at the stern of a vessel connected by a long cord with a rotor which was towed behind the ship. The instrument dial recorded the distance travelled. Thomas Walker first went into business to manufacture stoves at 58 Oxford Street Birmingham. Walker’s self-feeding stove was widely lauded at the Paris Exhibition of 1855, winning a prize medal and kick starting the first of many notable innovations for the Walker family's manufacturing business. However, it wasn’t until working on an earlier ships log model invented by his Uncle that Thomas Walker became interested in the further development of this device, used to ascertain a ship’s speed. Walker continued to improve on the common log for the company of Massey & Sons and these improvements were deemed revolutionary. This log became a firm favourite of the West India Association (British-based organisation promoting ties and trade with the British Caribbean). and the most common log in use for two generations. It took till 1861 for Thomas Walker and his son, Thomas Ferdinand Walker (1831-1921) to patent the first Walker log of many. Together, with the introduction of the A1 Harpoon Log two years later, they established the Walker Log Business as a force to be reckoned with. By the time of his passing in 1871, Thomas Walker Snr had not only founded a family business with considerable staying power but also instilled a tradition of public service. Having sat as a representative on the Birmingham Town Council for 15 years and played an active role in public works, he was soon given the nickname of ‘Blue Brick Walker’. Much like his father, Thomas Ferdinand Walker changed the face of the maritime industry. His patent of 1897, the ‘Cherub’ log, was a notable departure from the past providing a far more accurate reading and replacing the majority of logs of the age. They were the first to produce an electric log and the Walker factory was one of the first to introduce the 48 hour work week for employees. This ship log rotor was invented and made by a significant marine instrument maker and innovator of machinery. It demonstrates the huge leap taken to improve navigational accuracy at sea with an instrument that was in use for decades and still is today. Therefore it is a worthy addition to the Flagstaff Maritime collection as it demonstrates another aspect of maritime navigation.A Walkers Cherub III Patent mechanical ship brass rotor with with four vane's one marked with an anchor and "T. W. Cherub 441", The log is attached to a brass swivel with a short length of rope. Has T W Cherub 441 marked on a vane.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, log rotor, taffrail log, thomas walker, marine technology, marine instrument, navigation, ship speed, measurment

This is a framed receipt in the name of Skippy St. Elmo for completion of the Ski Club of Victoria Junior test for ski instructor. The test was completed on 25 August 1945 at the Scout Hall, Bogong High Plains. The receipt was found inside the cover of a typed manuscript. Mavis Grace Lindsay (Skippy) born in 1917 and married Tony St. Elmo in Ballarat on 18 December 1944. She was known as “Skippy” from childhood. They moved from Melbourne in 1945 and spent the year living in Wallace’s Hut. Toni was employed by the State Electricity Commission to record weather-related data. They were to become responsible for early developments at the Falls Creek resort and for promoting a love of skiing. Toni taught Skippy to ski and she practised on the High Plains where she and her husband lived. entering her in the first club championships held by the Bogong Ski Club at Rocky Valley, which he had established. Skippy St Elmo won many ski races during the 1950’s and represented Australia in New Zealand. In 1947, the first ski lodge was built by six SEC employees including Toni St Elmo. The lodge was named “Skyline”. In 1957, Toni was involved in building the first rope tow at Falls Creek, called Nissen. He also established the Nissen Ski School. In 1949, Skippy won the Downhill and Combined State Championship held at Mt Buller. In 1950, Skippy was selected to compete in New Zealand with the Victorian team to compete in New Zealand Skippy trained with the men at the Bogong Ski Club and that fact became a talking point in 1953 when the Albury Ski Club held an Open Championship and Skippy won in giant slalom and downhill. She went on to win many more races. In 1960, Skippy and Toni said farewell to Falls Creek. Skippy passed away in Queensland in July 2005 and Toni passed away in the September of the same year. In November 2006 the pair was honoured at the Alpine Village at Falls Creek by the spreading of their ashes over Eagle Rock.This certificate is an early document belonging to Skippy St Elmo, a pioneer of Falls Creek.Framed marking sheet for a Junior ski test for Ms Skippy Elmo at Bogong High Plains on August 25 1945. The test sheet is attached to a white backing paper which has 'My First achievement....skiing. Bogong High Plains' typed on it. The sheet has been framed for displau.skippy st elmo, ski instructor test, ski club of victoria, bogong high plains

The Bocian is a versatile training sailplane that first flew in 1952. The type has been modified in several respects over the course of production by SZD (tailplane and rudder in particular). About 600 have been built; many for export to 27 countries (including Australia). The aerobatic capability and fine performance (best glide ratio of 26) has enabled the Bocian to be used to train competition pilots as well as those of lesser experience. Many world gliding records were set in the 1950s and 1960s in Bocian gliders. The Museum’s example is a type D test flown in Poland on 3 and 4 April 1963. It was imported into Australia in September 1963 by Austerserve Pty Ltd. The first owner was the Alice Springs Gliding Club and the glider had name “Cumulus” painted on the side of the fuselage (since removed). The glider had recorded 726 hours 46 minutes flying time from 2138 launches as at July 1967 when it was transferred to the Darwin Gliding Club. It appears that the glider was damaged in June 1968. The substantial repairs to the fuselage, both wings and tailplane and other minor repairs were completed on 13 October 1968. The glider continued flying with the Darwin Gliding Club until August 1969 at which time the service to that club amounted to 59 hours 7 minutes flying time from 348 flights. Between August 1969 and August 1976 no flights are recorded in the logbook. It is understood that on its last flight at Bachelor, south of Darwin in the Northern Territory (August 1969) it was severely damaged when it crashed after spinning while being auto-tow launched (although this is not expressly mentioned in the logbook). Reg Hancock purchased the damaged glider and rebuilt the port wing and restored it to airworthy condition (September 1976). It was then transferred to Colac, Victoria, and used by the Colac Gliding Group at the Yeo airfield until February 1981, adding another 153 hours from 403 flights to the glider’s record. After airworthy inspection in September 1982 the glider was used by the Geelong Gliding Club until 1983 (logbook details not held). The 20 year survey was then due and the glider fell out of service. In the course of the most recent restoration attempt it was discovered that the glue used in construction had deteriorated and that it was no longer feasible to bring it back to an airworthy condition. Subject to restoration, this exhibit may be representative of the 1950s - 1960s Bocian two seat sailplane typeThis exhibit is a large two seat glider /sailplane of wood and fabric construction. All components are present with the exception of instruments. However, at the time that the aircraft was transferred to the Museum it had been taken apart for major restoration work. As received it is stripped of the top coats of paint and a number of components (including, amongst others, tip fairings, nose cone and cockpit elements) that were removed for facilitating the repair process. The glider, serial number 803, was registered as VH-GNLaustralian gliding, glider, sailplane, bocian, cumulus, alice springs gliding club, darwin gliding club, colac gliding group, geelong gliding club, hancock

Frederick Charles “Fred” Griffith was born in Albury, NSW on 2 March 1910. Educated in Albury and Geelong Grammar. Beginning in 1927 he spent many years working first as a jackeroo and on a range of prominent pastoral and merino stud properties in NSW and Queensland. In 1935 he repurchased his former family property “Toonallook", Bowna, NSW and developed it to be the largest Romney Marsh stud in the world, exporting rams to Argentina. He introduced many innovative practices on his property including rabbit control measures and aerial crop dusting. He was an active member of the Albury Show Society and in 1949 established the Albury Sheep Show. Fred was also the Albury representative on the Graziers’ Association Council for over 30 years. He became a life member of both the Albury and Commercial Clubs. Fred’s greatest hobby was snow skiing. His first visit to the snow was to Kosciusko in 1919. The Albury Ski Club was formed in 1935 and Fred was an inaugural member. In 1949 they were granted a site at Falls Creek to build their own lodge. Fred guaranteed the Club for finance from the Bank of NSW. The first portion of the prefabricated building was constructed in Albury. It was transported to Falls Creek on the back of Fred’s truck and erected in one day. This was the bathroom section and the rest was completed in 1950. The original lodge was burned down in 1952 and a new one built the following year. In 1955, Fred also built the Bowna Lodge for his family in partnership with David Fairbairn. He became head of the North Eastern District Skiing Association (N.E.D.S.A.) and successfully applied to run the Australian Ski Championships. Fred also inaugurated children’s races at Falls Creek and ran them for about 20 years. He also formed the company “Falls Creek Ski Tows”. In 1956 Fred along with a group of key people selected the site for Thredbo Village. Fred and his brother sold Toonallook in sections between 1951 and 1974. He moved to Albury and set up as a landscape gardener and fencing contractor. After a serious work accident, Fred retired in 1985 and moved to Rosebud, Victoria where he died on 19 August 1992. Bowna is now known as the Riverina Ski Club.This image depicts Fred Griffith who was a pioneer of the Albury Ski Club and Falls CreekA black and white photo showing Fred Griffith on left of image looking towards Whitehaven lodge fred griffith, albury ski club, falls creek, bowna ski club

postcards feature images taken by Frederick Charles Griffith. “Fred” Griffith was born in Albury, NSW on 2 March 1910. Educated in Albury and Geelong Grammar. Beginning in 1927 he spent many years working first as a jackeroo and on a range of prominent pastoral and merino stud properties in NSW and Queensland. In 1935 he repurchased his former family property “Toonallook", Bowna, NSW and developed it to be the largest Romney Marsh stud in the world, exporting rams to Argentina. He introduced many innovative practices on his property including rabbit control measures and aerial crop dusting. He was an active member of the Albury Show Society and in 1949 established the Albury Sheep Show. Fred was also the Albury representative on the Graziers’ Association Council for over 30 years. He became a life member of both the Albury and Commercial Clubs. Fred’s greatest hobby was snow skiing. His first visit to the snow was to Kosciusko in 1919. The Albury Ski Club was formed in 1935 and Fred was an inaugural member. In 1949 they were granted a site at Falls Creek to build their own lodge. Fred guaranteed the Club for finance from the Bank of NSW. The first portion of the prefabricated building was constructed in Albury. It was transported to Falls Creek on the back of Fred’s truck and erected in one day. This was the bathroom section and the rest was completed in 1950. The original lodge was burned down in 1952 and a new one built the following year. In 1955, Fred also built the Bowna Lodge for his family in partnership with David Fairbairn. He became head of the North Eastern District Skiing Association (N.E.D.S.A.) and successfully applied to run the Australian Ski Championships. Fred also inaugurated children’s races at Falls Creek and ran them for about 20 years. He also formed the company “Falls Creek Ski Tows”. In 1956 Fred along with a group of key people selected the site for Thredbo Village. Fred and his brother sold Toonallook in sections between 1951 and 1974. He moved to Albury and set up as a landscape gardener and fencing contractor. After a serious work accident, Fred retired in 1985 and moved to Rosebud, Victoria where he died on 19 August 1992.These postcards document how Falls Creek was portrayed to the wider community.A set of postcards showing aerial views of Falls Creek as well as groups of skiers on the slopes, On Back of each card: POSTCARD CORRESPONDENCE / ADDRESS ONLY In a square for stamp Placement - KODAKfred griffith, albury ski club, falls creek, bowna ski club