Manual - book, blue card cover, with binder clips, approx. 200 pages, "AEC Spare Parts Catalogue REGAL Passenger Chassis", for four wheel SD Bus or Coach Chassis for chassis number 128 to 227. Covers all parts of a bus chassis. Has a set of explanatory notes.Has on the inside of the front cover "On loan from Bus Branch Engineer", with a signature and dated 17/3/1970.trams, tramways, aec, buses, catalogue, instructions

Plans and documents prepared by George Duncan for the Melbourne Tramways Trust showing details of the track construction, drainage and costs for the construction of the Melbourne cable tram and horse tram system for the Melbourne and Tramway Omnibus Co. Part 1 - track cross sections for both cable and horse trams and various rail weights - lbs/yard part 2 - details costs and mileages for each liine, report from George Duncan and remnant part of a printed map missing the lower half. part 3 - drainage report detailing the works and cost for each line. part 4 - continuation of drainage report - and last part of the book Map printed on cloth - blue print - showing the various lines. Note the Windsor to St Kilda line shown as a horse tram line, but was built as a cable line - the last to be opened.Yields information about the construction of the cable tram system by the Melbourne Tramway TrustFolder - heavy card leather covered covers with gold lines around the edges and gold blocked title. Has marbled glued end papers, containing 9 cloth backed blue print drawings, 22 printed sheets and two foldout maps. The lower half of the first fold out map has been torn out and lost. The second fold out map, a cloth backed blue print.Date stamped in two places with "The Melbourne Tramways Trust Engineers 9 Mar 89" (1889), in two places.tramways, trams, cable trams, mtt, mtoco, melbourne tramway trust, construction, drainage, maps, george duncan, track work, costs

Black and white photograph"On back of photograph" Foundation stone unveiling by Mr Lucas(Engineer), Auditorium section of Town hall From L to R J.C.Taylor (Contractor),I.G.Anderson (Architect),A.F.B.Long(Town Clerk), J.K.McCaskell(Mayor), J.Walker (Foreman), J.R.Lucas (Engineer), A.T.Miles (Councillor), A.Blood (Councillor)

These photographs are a pictorial and historical record of the photographer, Ronald George Thorn, of his days as an engineer with the SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one man's involvement in the construction of the Kiewa Hydro Electric Scheme during his employment with the State Electrical Commission of Victoria.A foolscap sized sheet of lightweight cardboard with 10 small black and white photographs on both sidesNumber 3 is handwritten in ink on a small square of white paper and adhered to the top centre of the sheet. On the reverse side, the number 4 is handwritten in ink and adhered to the top of the sheet.photographs, secv, engineer

These photographs are a pictorial and historical record of the photographer, Ronal George Thorn, of his days as an engineer with the SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one man's involvement in the construction of the Kiewa Hydro Electric scheme during employment with the State Electricity Commission of Victoria.A foolscap sized sheet of lightweight cardboard with 8 small black and white photographs adhered to sheet 5 and on the reverse side (sheet 6) there are 7 small black and white photographs.Number 5 is handwritten in ink on a small square of white paper and adhered to the sheet with sticky tape. On the reverse side is the number 6, also handwritten in ink and adhered with sticky tape.engineer, kiewa, secv

These photographs are a pictorial and historical record of the photographer, Ronald George Thorn, of his days as an engineer with SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one mans involvement in the construction of the Kiewa Hydro Electric Scheme during his employment with the State Electricity Commission of Victoria.A foolscap sized sheet of light weight cardboard with 3 photographs (black and white) adhered to sheet 7 and 8 black and white photos adhered to sheet 8. Number 7 is handwritten in ink on a small square of white paper and adhered to the page by sticky tape. Number 8 is also written as above and adhered to reverse side.engineer, kiewa, secv

These photographs are a pictorial and historical record of the photographer, Ronald George Thorn, of his days as an engineer with SECV. He worked in the Kiewa area as a cadet engineer from 1948 to 1950 and then in 1953 to 1956 as an electrical engineer grade 2.The photographs tell the story of one man's involvement in the construction of the Kiewa Hydro Electric Scheme during his employment with the state Electrical Commission of Victoria.A foolscap sized sheet of lightweight cardboard, brown in colour, with 8 small black and white photographs on page 9 and 4 small photos on page 10.Number 9 is written in ink on a small square of white paper and adhered to the page with sticky tape. The number 10 is also written on a small square of white paper and adhered to the reverse side with sticky tape. kiewa area, engineer, photographs

Army Uniform from the Vietnam War era.Representative of the era. Massed produced by the Australian Government.Uniform comprises Jacket (.1) Pants (.2) and Tie (.3) . Khaki wool. Button up trousers. Jacket has Royal Australian Engineers badge on shoulder, gold buttons on epaulettes.Label reads: Buckleys & Nunn Ptd Ltd / Melbourne. Handwritten: Chappelluniform, army, vietnam

Mr.Rex H. Hollioake was Shire Secretary for the Ballarat Shire Council from 10th August 1958 till 10th February 1993. This photo forms part of a collection taken to commemorate the opening of the Wendouree Municiple Centre on 20th November 1959.Original Historic Photo of all Councilors for the year 1959.Mr Rex H. Hollioake,Shire Engineer. Sepia photo,(rectangular),on white mount,situated right hand side of middle row of composite photo of all councilors for the year 1959.Presented to Ballarat Shire Council by C.E.Brown,President 1959-1960.To commemorate opening of Wendouree Municiple Centre 20th November 1959. wendouree municiple centre opening 1959, ballarat shire council 1959, shire secretary, hollioake rex

Victorian Railways Memo: Re staff change dated 5.6.1959. Small paper memo from chief mechanical engineer to J Badham Acting Dist. R.S. superintendant of staff changes.document, memo, railway, victorian railways. staff change dated 5.6.1959. j badham acting dist. r.s. sup't .

Esma Turner Collection - (Esma Turner - Secretary of the Huntly and District Historical Society) Amalgamated Society of Engineers / photo of W CAMPBELL 10x15mm (William James) born 9.7.1862 - see 4737.1.photograph, portrait, male, esma turner collection - ( esma turner - secretary of the huntly and district' s historical society ) amalgamated society of engineers / w campbell ( william james ) born 9.7.1862 -

The Fred Rochow Railways Collection incorporates photos related to the operation of the Wodonga Railway Station including different types of trains and railways staff C. 1930 – 1990. It was donated to the Wodonga Historical Society by Fred Rochow, a railwayman who spent many years based in Wodonga. He joined the Victorian Railways on 17th June l947 and retired in 1988. For some time, he was a member of the Australian Federated Union of Locomotive Enginemen and served a term as a member of the Trades Hall Council. He had an extensive knowledge of the struggles that took place to achieve better conditions for railway workers. Fred worked for many years as a fireman and then worked his way up the ranks to driver, experiencing many changes from the days of steam locomotives through to diesel trains, locomotives and even the modern XPT train. He worked throughout Victoria at different stages of his career, with his final working years focused on the northeast of Victoria and the Albury to Melbourne line. After his retirement, Fred continued to share his love of steam miniature trains with the community.This collection has local and statewide significance as it captures images of trains, locomotives and personnel who operated the railway services in Wodonga and throughout Northeast Victoria. The railways played a critical role in opening up Victoria and connecting Australia for trade, business, social communication and transport.Railway men at Albury in October 1988 Left to right: Driver Len Gregson, Engineers' Instructor Peter Blackford, Driver Eric Johnson, Driver Austin Fulford, Driver Noel Strauss.railways wodonga, fred rochow, wodonga railwaymen

William George Page was Shire and City Engineer in Wodonga from 1965 until 1989. When he arrived the Shire of Wodonga had a population of 17,000 people. In 1966 Wodonga was selected as a city for special growth assistance. In 1972 Bill Page presented a new Town Plan to the Wodonga Council. Over the ensuing years he dedicated himself to bring this plan to fruition. He often had to argue and campaign with the Albury-Wodonga Corporation to push for the interests of development in Wodonga. This included winning a planning appeal to allow the saleyards to be relocated to Bandiana on the outskirts of Wodonga. Bill Page retired on health grounds in July 1989. The Council honoured him with a farewell dinner and renamed the saleyards at Bandiana the W.G. Page Saleyards in his honour.The Mayor , Cr Valentina Gillard, said "Every development in Wodonga in the past 24 years has a bit of Bill Page in it". William Page died 3 months later at 58 years old.This image depicts an important centre in the development and support of the livestock industry around Wodonga.An aerial photograph of the W. G. Page Saleyards in Wodonga. It has been mounted in a wooden frame.On a sign attached to the photo frame: "This photo of the W.G. Page Saleyards has been donated to the people of Wodonga from Mrs Pat Page and Family. The saleyards were named after the late Bill Page, City Engineer of Wodonga Council for 25 years until his death".w. g. page saleyards, wodonga saleyards, william george page

This book was owned by John Crawley, engineer, architect and surveyor. He was appointed District Engineer for the Public Works Department for the Western District in 1866. He was the Shire of Warrnambool Engineer from 1874 to 1895 when he was succeeded by his son.This book is of interest as it contains examples of architectural designs from U.S.A. in the 1870s. Designs such as these influenced the designs of buildings in other countries including Australia. This book is also of interest because of its connection to John Crawley, a member of the Crawley family that had a long and influential association with the Shire of Warrnambool.This is a hard cover book. It has a brown cover with gold lettering. The book has come apart from its binding so many of the pages are loose and the covering on the spine is missing . The front cover is somewhat stained and the edges are worn. The book has many diagrams and illustrations.The inscriptions are handwritten in black ink J. W. Crawley Warrnambool J.W. Crawley 1879john crawley

The book was used by Charles Bacon who studied at the University of Nevada in the late 1930s/early 1940s. Bacon worked at Bunker Hill Mines and Kellogg Idaho, before arriving in Australian in 1951. He worked for CN Myers, a company involved with paper converting. CN Myers was a family business (on Charles Bacon's maternal line). The Mackay School of Mines, Nevada was established in 1908. At the time of writing this mook T.J. Hoover was Professor of Mining and Metallurgy and Dean of the School of Engineering at Stanford University. Theodore Jesse Hoover, brother of the 31st President of the United States, was born in West Branch, Iowa, on January 28, 1871. He attended Stanford and received the Bachelor of Arts degree in Geology and Mining in 1901. Following graduation his professional career started with the position of assayer for the Keystone Consolidated Mining Company. After one year, he became assistant manager for the Standard Consolidated Mine, and a year later he was promoted to manager of the operation. In 1907 Hoover went to London as general manager of Minerals Separation, Ltd. This company was developing the froth flotation process for recovering minerals from ores. Hoover took an active part in the development of the flotation concentration process and authored one of the first books on the concentration of ores by flotation. After four years with Minerals Separation, Ltd., Hoover entered private practice as a consulting mining and metallurgical engineer with offices in London and in San Francisco. He was very successful and held positions of consulting engineer, managing director, director, and president of many mining companies in America, Europe, Asia, Africa, and Australia. He returned to Stanford in 1919 as Professor of Mining and Metallurgy and Executive Head of the Department of Mining and Metallurgy. His experience and ability in organization made him a natural leader. He was influential in the formation of the School of Engineering at Stanford. The School was formed in 1925 and he was made dean, a position he held until his retirement in 1936. As dean of engineering, he promoted a broad fundamental training program for undergraduate engineering students. Under his guidance, emphasis was placed upon graduate work and he was responsible for developing strong graduate engineering curricula at Stanford. While dean he continued teaching and his course, "The Economics of Mining," developed into a book which was published in 1933. He became interested in the functions of engineers and, with Professor Fish, wrote a book entitled "The Engineering Profession" which was published in 1940 and revised in 1950. In addition to his academic activities he was generous in his hospitality. Faculty and students alike enjoyed the annual field day and barbecue at his Rancho del Oso, near Santa Cruz. He was widely read and had a lively interest in all the things he encountered. He speculated on the antiquity of man and man's early production processes. To verify an idea regarding flint tools, he studied their shapes and became proficient in making arrow heads. He was also interested in wild life, and was one of the founding members of the Cooper Ornithological Society. (http://engineering.stanford.edu/about/bio-hoover) Blue hard covered book of 547 pages including an index. Contents include mine valuation (sampling, ore deposits, ore reserves, financial provisions, sale of mineral product, metal prices, reports) and Mining Organization (Co-operative effort, Mining Companies, Promoting Mining Enterprises, fluctuations of share prices, valuation of mining shares, fakes and fallacies, the mining Engineer and the law) and Mine Management (Organization of staff, mine manager, efficiency, industrial relations, training and discipline, safety). Inside front cover 'Charles Bacon Mackay School of Mines"charles bacon, mining engineering, metallurgy, university of nevada, mackay school of mines, stanford, bacon, mining, economics, divining, theodore hoover

This book belonged to John William Crawley an engineer, architect and surveyor who was appointed District Engineer for the Public Works Department in the Western District in 1866. He was the Shire of Warrnambool Engineer from 1874 to 1895 when he was succeeded by his son. This book is of minor importance as a memento of John William Crawley an important engineer in the Shire of WarrnamboolThis is a hard cover book with pages containing architectural plans,designs and printing. Some of the pages are blank.The cover is faded and spotted and has a gold title The spine is damaged .Inside the front cover is an inscription and on the following page is another inscription.J.W Crawley 1879 Architecture john william crawley, shire of warrnambool

Official opening of the Karralyka Centre - L-R A.C. Robertson (City Engineer), Harry Seidler (Architect), Cr Jack McRae, Sir Henry Winneke, Cr Pat Gotlib (Mayor), Arthur W Hall (Town Clerk). +Additional Keywords: Robertson, Alan C. (City Engineer) / Seidler, Harry / McRae, Jack (Cr) / Winneke, Sir Henry (Governor of the State of Victoria) / Gotlib, Pat (Cr) / Hall, Arthur W. (Town Clerk)

Official opening of the Karralyka Centre - L-R A.C. Robertson (City Engineer), Harry Seidler (Architect), Cr Gerald Smart, Sir Henry Winneke, Cr Pat Gotlib (Mayor), Arthur W Hall (Town Clerk). +Additional Keywords: Robertson, Alan C. (City Engineer) / Seidler, Harry / Smart, Gerald (Cr) / Winneke, Sir Henry (Governor of the State of Victoria) / Gotlib, Pat (Cr) / Hall, Arthur W. (Town Clerk)

Official opening of the Karralyka Centre - L-R A.C. Robertson (City Engineer), Harry Seidler (Architect), Cr Frank Corr, Sir Henry Winneke, Cr Pat Gotlib (Mayor), Arthur W Hall (Town Clerk). +Additional Keywords: Robertson, Alan C. (City Engineer) / Seidler, Harry / Corr, Frank (Cr) / Winneke, Sir Henry (Governor of the State of Victoria) / Gotlib, Pat (Cr) / Hall, Arthur W. (Town Clerk)

Official opening of the Karralyka Centre - L-R A.C. Robertson (City Engineer), Harry Seidler (Architect), Cr W.R. Wilkins, Sir Henry Winneke, Cr Pat Gotlib (Mayor), Arthur W Hall (Town Clerk). +Additional Keywords: Robertson, Alan C. (City Engineer) / Seidler, Harry / Wilkins, W.R. (Cr) / Winneke, Sir Henry (Governor of the State of Victoria) / Gotlib, Pat (Cr) / Hall, Arthur W. (Town Clerk)

The Cowes Power station was in Cowes west, corner of Chapel Street and Osborne Avenue. James Norman Day was in charge c. 1935.HistoricalPhotocopy of letter from Mr & Mrs Ronald Day, Mermaid Beach, Queensland, sent to the Electrical Engineer, Cowes Council, 1995. and reply to sender. Also copy of photo of equipment in power station.Mr and Mrs Ronald Ernest Daypower station, electricity, james norman day

Victorian Railways Memorandum Chief Mechanical Engineers Office Melbourne 15.12.1955. Foolscap document advising J Badham is to take up duty as Acting District Rolling stock Superintendant Bendigo on 9.1.56.document, memo, railway, chief mechanical engineers office melbourne. j badham. acting district rolling stock superintendant bendigo on 9.1.56.

Memo dated 18.7.1946 from chief mechanical engineer to J Badham requesting him to transfer temporarily to Melbourne on 23.7.46 to relieve assistant Shed Foreman A.A. Searle. Memo on fine paper.document, memo, railway, assistant shed foreman a.a. searle

Designed and constructed in Camp1 by W (Jack) Weber and used to make scarves by and for the interneesHandmade wooden loom with levers ,pulleys ,eyelets ,upright shapes and part woven wool made from scrap metal and improvised tools. Jack was an engineer who migrated to Queensland and was interned in 1939.tatura, handcrafts, weaving