The Laister-Kauffman 10A (LK10A) is a 2 seat a military training glider developed from a successful Jack Laister single seat glider called Yankee Doodle that first flew in 1938 and was exhibited at the Paris Air Show of 1939. The two seater variation was ordered in 1941 by the US Army for training glider pilots of troop carrying gliders. The military designation was XTG-4. The LK 10A glider was a simpler, more robust design than Yankee Doodle. A longer canopy enclosed both seating positions. The top of the fuselage formed a straight ridge from the top of the canopy to the point where the fin – rudder connected. Also, the design was simplified by adopting straight spar wings of 15.2 metres in place of gull wings of 14.170 metres. During the war years 156 LK10As were produced before the contracts to supply the US Army were terminated. Many of these were later sold as surplus. The Museum’s exhibit (serial number 122) was built in 1943. It was imported into Australia in the 1950s by Ric New, a member of the Gliding Club of Western Australia. Ric New modified the glider by “flat topping” the fuselage and making other aerodynamic changes. This kind of modification of the LK10A was a well tried strategy in United States for extracting better performance from the glider. It is understood that the reduction in weight and cleaner aerodynamics from the changes could increase the glide ratio from 1:24 to something like 1:30. The LK10A was located at the Gliding Club of Western Australia for many years. Records reveal that it was kept airworthy until about 1975. The LK10A is an important acquisition in that it allows one to compare the state of two seat glider design in United States and the United Kingdom in the immediate post war period. It is interesting to note that at that time a number of clubs in Australia who acquired a two seat glider for training chose the United Kingdom open cockpit high strutted wing offerings from Slingsby (e.g. T31) instead of more innovative military surplus gliders from America. Modified LK10A glider consisting of tubular steel fuselage with a combination of fabric and metal covering, fabric covered wooden wings and other flying surfaces.australian gliding, glider, sailplane, laister, kauffman, ric new, gliding club of western australia, lk10a, yankee doodle, xtg-4

The Ka 8 was designed by Rudolf Kaiser in 1957 and built by Alexander Schleicher. It has been described as the single seat version of the Ka 7 Rhonadler. The Ka 8 proved popular with clubs in its role as a sailplane for early solo flying. Over 1100 were produced. The Museum’s example is a Ka 8B which is the second variant of the design, distinguishable by a larger blown Plexiglas canopy and improved ailerons. The particular glider was built by the RAAF Williamtown Gliding Club from kit supplied by Edmund Schneider Ltd of South Australia as agent for Alexander Schleicher. It was test flown on 8 July 1967. For a period from August 1994 it was owned by a syndicate at the Bendigo Gliding Club. The last entry in the log book is dated January 1995 at which time the glider had accumulated 1148 hours from 2303 flights. From 1967 to 1994, the glider was flown at numerous places including Williamtown, Bellata, Warkworth, Dubbo, Waikerie, Quirindi, Tamworth, Redding, Narromine, Leeton and Keepit. During 1994 and 1995 it was flown a small number of times at Bendigo. A notable flight recorded in the logbook is dated 31 October 1971 when W. Kenny reached 11,000 feet in height during a flight of 5 hours 10 minutes. The last owner prior to the transfer of the glider to the Australian Gliding Museum in 2015 was John Ashford of the Geelong Gliding Club. The glider carries Serial Number 8478-SH and appears to have been registered firstly as VH-GPA and secondly as VH-GMA. The last registration (VH-GMA) was cancelled in 2011.This Kaiser Ka8B sailplane, when fully restored, will be an airworthy example of a popular 1960s German club sailplane type. It is a rarity in Australia as only 4 of the type have been registered and flown here.Single seat sailplane made with a steel tube framed fuselage and wooden wings. A glass plastic moulding has been used to form the top of the fuselage forward of the cockpit. The structure is fabric covered.The glider serial number 8478-SH and the registration VH-GMA.australian gliding, glider, sailplane, schleicher, kaiser, ka 8, schneider, raaf williamtown gliding club, bendigo gliding club, geelong gliding club, ashford

Chris Bailey’s father loaned this bell to Newcomb High School for the first two years until a PA system was installed. It came from his father’s boat in the Middle East. Chris was a Form 1 student in 1969. The bell is now kept at Chris’ home, 4 Yvonne Street, Belmont, 3216. Metal Bell

Clothing. Girl's white long sleeved waisted linen jacket. Front opening jacket with 4 cm band from shoulder to waist forming V shaped neckline. Bodice of jacket has 8 cm vertical lace inserts next to the edge of the bands, continuing over the shoulders and down the back of the bodice to the waist. A 16 cm lace insert runs at right angles to the bodice inserts along the top of the kimono cut long sleeves. The sleeves have an 8.5 cm turned back fabric cuff. From the waistline is an ungathered skirt widening slightly at the hem. The front opening is fastened at the waist with one metal hook and cotton loop.Stitched in red cotton inside back of neck 2/4.costume, children's, girl's white waisted linen jacket

Clothing.Woman's cream coloured long sleeved silk bodice. High round neckline with 4 cm stand up collar. Semi-circular yoke front and back (13cm radius). Collar and yoke have embroidered net over silk fabric. Kimono cut long sleeves have cuffs of embroidered net over silk from shoulder to wrist along top of sleeve (33cm X 4 cm). Sleeves and front of bodice have all over vertical pin tucks. The front of the bodice has cotton tape ties stitched across from centre front to side seams at waist level gathering the fabric to form a peplum effect at the front. The tails of the cotton tapes tie across the back from the side seams. Full length front opening fastened with nine press-studs between collar and waist and a metal hook and eye at the waist. The back of the bodice has vertical pin tucks across the shoulders and below the yoke extending 9 cm below the yoke.costume, female, woman's cream coloured silk bodice

Clothing. Woman's navy striped wool crepe coat. V neckline with fabric panels to waist with appliqué piping free form pattern. Coat fastened at waist with four X 1.5 cm fabric covered buttons and fabric loops. Long straight sleeves with fold back cuffs (4 cm). A-shaped coat widens to hem. Padded shoulders.costume, female, woman 's navy striped wool crepe coat.

Clothing. Black suede bracelet length gloves, embroidered with floral motifs in the Beauvais style of embroidery, and as stated inside the right glove, ''REAL BEAUVAIS POINT HAND MADE 927 6/14. Embroidery made with a hook. Fifteen tiny flowers in shades of blue, pink, red, green, are scattered across the top of the gloves.REAL BEAUVAIS POINT, HAND MADE 927 61/4 RIGHT GLOVE. MADE IN FRANCE 927,Left glove.costume accessories, female, bracelet length black suede gloves, beauvais is a french term for a form of tambour embroidery, which is decorative needlework technique using a hook.

Clothing. Fine white linen fabric. A .8 cm 'tuck' edged at top and bottom with a spoke-stitched border, marks the waistline. Below the waistline is a peplum, split at the centre front with 8 cm deep peaks. These peaks are repeated at the centre back. The peplum tapers to 7 cm deep at side seams. The camisole is trimmed at the top edge with a 4 cm deep band of cotton lace. The top edge of the linen fabric has a double row (off set) of cotton embroidered 'spots' 2 mm in diameter, and three rows of drawn thread work - one cm in width, 3.5 cm wide lace form the shoulder straps. The back opening fastens with six tiny 7cm pearl buttons, and hand-stitched button holes. The lower button fastens with a loop at the waistline 1880-90's. A 'fan' of pintucks, arched from 4 cm long at the ends, to 6 cm long at the centre, fans the midriff at the centre front, above the waistline - 28 tucks in total.costume, female, camisole.

Clothing. High stand-up embroidered net collar-close fitting to the neck, and fastening at the back with now 4 metal hooks and loops (one hook missing) and edged at top and bottom with tiny black beads. Five metal ''curved wires'' 7 cm long, are spaced around the up right ''collar'' (to hold in place). The embroidered net forms a V shaped panel at the centre front, and has 15 silk covered oval buttons .8 cm long, from throat to lower bodice. This panel is bordered by embroidered and beaded braid, 7 cm wide and giving a cross-over effect. Cotton tape inside waist 66 cm long fastens with two metal hooks and eyes.Under this lace cross-over, the bodice is shirred and pleated, to give fullness for movement. Pleats are ''caught-in'' at the waistline. An elbow length over-lay of sheer silk fabric, edged with the beaded braid. The sleeves are silk fabric to the elbow, and then narrow in to a three hook plackett at the wrist. This lower sleeve with a 2.5 cm lace frill, and a spotted tulle fabric, and ''dotted'' at the upper side with a double row of tiny black beads. A false tucked effect at opprox knee level at back of skirt. Back hemline extends to a small ''train''. Hemline is heavily weighted.costume, female, full length long sleeved black dress

Textiles, pink cotton fabric handkerchief bag. Front has an overlay of cream coloured tapestry fabric embroidered with cross stitch and lines of pattern. One corner is turned down to represent at purse flap to form a 17 cm opening. Bag has a 4 cm frilled lace edge (cream coloured) on three sides plus around the turned down flaps. 2 cm pink ribbon bows on three corners plus on turned down flap. Hand made.textiles, domestic, handkerchief bag

Clothing. Cream coloured lace silk wedding dress. Dress made from fine silk fabric with self stripe, fully lined with cream coloured linen. High round neckline with stand up lace collar(6cm). Bodice at front has crossover from shoulder to waist, forming deep Vshape at centre front with net insert below the collar. Net insert has vertical pin tucks. Bodice front and back has cream coloured lace overlay that extends over the shoulders to halfway down the 3/4 length sleeves. Hem of sleeves trimmed with embroidered lace with geometric pattern. Cummer bund of pleated silk fabric (7cm) is attached around waistband. Floor length skirt is gathered into the waistband.Front of skirt has straight lace panelsoverlay (37cmX 90 cm) including 20 cm flounce at lower edge, attached at waistline. Back of skirt has gathered lace overlay attached at waistline extending across side seams and over the edge of front lace panel. Centre back opening fastened with eighteen metal hooks and eyes from collar to waist and six metal press-studs below the waist. Cummerbund fastened with three metal hooks and eyes. A fabric insert at centre back fastened with press-studs. Collar has five pieces of stiffening plastic. Bodice has three bone casings across front above waistline, and four across the back. Cotton tape band (66 cm X 3cm) attached inside bodice at front with hook and eye fasteing.Printed on inside waistband, ''AMALIA SALXANO FARRONE'' NAPOLI ''MODE +CON----'' VIA EGIZIACA A PIZZO FALCONE 93''. Printed inside LHS sleeve at arm pit ''SAXONIA 48X''.costume, female, cream coloured wedding dress

Australian copy book for sixth and seventh grades. Quotations, poetry and prose, commercial, letters and forms. published for the Education Department by Albert J. Mullett. At the top right corner in pencil the name Ida A. Comer. On the back a design of a pupil sitting at a desk with the words: position for writing back view. Underneath the picture the characteristic features of the writing in this series of copy books are as follow: 1- The slope is 15 degrees from the vertical. 2 - the joinings of the letters are made so that the whole word may be written without lifting the pen. 3 - The letters are formed in the same way throughout the series. 4 - The distance between the words is greater than between the letters. 5 - Simplicity has been arrived at by making the loops short, and by avoiding all flourishes. on the inside front cover directions for writing and on the inside back cover two pictures of a girl writing with the words: girl starting and finishing line. The book has 22 pages.books, school, australian copy book

Ladies brightly coloured waist length jacket. Single breasted with front opening, fastened with six X2.5 cm fabric covered shank buttons. 10 cm fold over collar attached across back of neck and detached at shoulder seams to form two 35 cm ties. These ties are threaded through two 4 cm buttonholes-one either side of V neckline 10 cm below shoulder seams. Shaped peplum dipping to V shape on either side of front opening and on either side of centre back. Padded shoulders. Front has 15 cm darts from each shoulder seam. Three quarter length sleeves shaped at end by three darts. Two 1 cm fabric covered buttons and loops fasten to form a pleat to tighten the opening by another 2 cms.costume, female, ladies short jacket

Ladies yellow long sleeved blouse. See through nylon fabric with all over spot pattern. Fold over collar. Front opening with tree X 1 cm white plastic buttons. Horizontal darts at bustline on front. Vertical darts from lower hem- two at front and two at back to form shaping. Set in long sleeves with 4 cm cuffs, fastened with one X 1 cm white plastic button.costume, female, ladies yellow long sleeved blouse

Copy of pages 3 and 4 titled French's Corner and Village Parliaments. Some passengers travelling on the tram would ask to be put down at French's corner. The conductor had no idea where it was. The passenger would be returning to where he used to live or work. The old who met at the pub corner were mostly teetotallers, but they met at the pub where the publican provided the two forms of seats for them and if business was slack he would join in the discussion. Another group met at Uncle Tom Foss' shop further down the road. This group was made up of old men over 80 and they met inside the shoemaker's shop. One old man used to go to his granddaughter's house and sit beside the kitchen fire and then he would tell her he had a pain beneath his ribs and she would give him a little wine to drink. Then he lost the last of his cronies and he went slowly up the hill and told his granddaughter he had nobody left but his old stick. The pain of being left without contemporaries made him forget about the pain in his side. There was another group that met at Philpot's smithy. The men would talk and argue while the smith was shoeing the horses. This smith has a long finger- nail on his left hand which he would use to pick up horse shoe nails as he was shoeing the horse. The bottom of the page has a photo of the main street of Long Gully taken from the Blacksmiths Shop.bendigo, history, long gully history group, the long gully history group - french's corner and village parliaments, manchester arms, french's hotel, mr french, uncle tom foss' shop, philpot's smithy, a crossley

Document. Harry Biggs Collection. Item 1 - A letter with Borough of Eaglehawk letterhead to Mr H. Biggs, Royal Historical Society of Victoria Bendigo Branch, dated 9/9/1970, Re the Log Lock-up, Eaglehawk. It acknowledges a report sent to it & says a request for the Historical Society to become a committee of Trust for this building is being ascertained. Stamped with Reply affirmative11/10/70. Item 2 - a similar letter dated 18/9/1970 saying final decision will be held over. Item 3 - Instruction in letter form to Bendigo Historical Society Eaglehawk to plan & report the proposed Public Buildings Reserve Eaglehawk. Item 4 - Memorandum to Engineer's Report 17/9/1970 with recommendations for the various areas - Court House, Senior Citizens Club, Historical Society, Council Depot, Toilet Block, Occupied Land. Item 5 - Formal Engineers plan of Borough of Eaglehawk. Item 6 - Log Lock-up Appeal - list of donors.place, building, site, harry biggs collection, log lock-up appeal, eaglehawk

Document. KELLY & ALLSOP COLLECTION. 4 page Prospectus of the Trengganu Tin Development Company (No Liability). Malay Peninsula. Nominal capital - 2,000 shares @ 25 Pounds each. Includes an application for shares form. Bankers are English Scottish and Australian Bank Ltd. Solicitors are Amess and Clarkson, Melbourne. Legal Manager is M.I.Murchie, Bank Place, Melbourne. Date shown on form is 1926.Trengganu Tin Development Co.business, stockbroker, kelly & allsop, kelly & allsop collection, prospectus, trengganu tin development co., malay peninsula, e.s.& a. bank, amess and clarkson, m.i.murchie.

McColl Rankin & Stanistreet, Prospectus of North Deborah Mining Co NL. Date: 17 April 1937. Book soft cover 6 copies; A/ Excellent condition map and applicant form intact. B/ Good condition. Map and application form intact, copy has been folded down middle. Inscription on front cover, date altered to 1938, No 1978. C/ Good condition. Map and application intact. D/ Map intact, application removed. Good condition. Map intact, application removed. Good condition. F/ Application removed, map intact, prospectus removed, fair condition. Markings: on page 2, 3, 4, & 6. G/ Application removed, map intact, fair condition. Markings on page;2, 3, 4, & 5.organization, mining, north deborah mining company nl, mccoll rankin & stanistreet, prospectus of north deborah mining co nl. date: 17 april 1937 map application form

Document :Form A, Gold Mining Lease Crown Land 11314 Bendigo, Entered in the Register Book, Vol. 333 Fol. 138, Embossed seals of Central Napoleon and King George VI, Map: Mining District of Bendigo County of Bendigo Parish of Sandhurst, During the reign of Queen Elizabeth II, 4 pages.organization, business, industry - mining, mccoll rankin & stanistreet, mining, gold mining, central napoleon

Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Hypodermic glass syringe (.1) with three hypodermic needles (.2 - .4) and metal storage case (.5 - .6). Barrel of syringe is marked from with measurements from 0-20. .2 is a needle head with a rounded flange tapering towards the needle shaft. .3 and .4 are needle heads with flattened oval bulbs, attached to a round bead which holds the needle shaft. The case is oval in shape with the word 'Crystal' engraved diagonally into the top of the lid. There are two fixings attached inside the bottom of the case which form a cradle for the storage of the syringe.'Crystal'

The Bird Mark 4 is an anaesthesia assistor or controller with pressure and volume controller to be driven by a respirator. Combination of Mark 4 with respirator makes an automatic anaesthesia respirator eliminating manual bagging. The machine can work through Boyle anaesthetic system. It is designed for both paediatric and adult application. (Drugs and Equipment in Anaesthesia Practice, Aruna Parameswari, 2019)Green metal box atop a clear plastic unit with a black bellows inside, which forms one part of the overall unit. The unit is attached to a pole, enabling height adjustment. The pole is, in turn, attached to a set of four castors [not original].White text on black stick on strip on top of metal box: DO NOT PULL APART / FOR USE IN THEATRE ONLY A series of instructions are printed in white text over the unit.anaesthesia assistor, anaesthesia controller, pressure controller, volume controller, paediatric, adult

Samuel Cross worked for the Hamilton Waterworks Trust and his invention relates to a box joint in two sections and is particularly useful for repairing a pipe containing fluid under either high or low pressure in which a leak, blow out, or burst occurs. Samuel Cross' invention is mentioned in the minutes of the Hamilton Waterworks Trust, copied pages can be found in the supplementary files. Cross' invention helped to prevent water loss whilst a pipe was being repaired. Hamilton Waterworks Trust was an early predecessor to Glenelg Water which later merged with Portland Coast Water and South West Water to form Wannon Water. The patent is significant because the invention was revolutionary for the early Victorian 20th century engineering, and it is still being used today.A3 sheet, printed on both sides, folded into A4, printed in black and white, contains 4 photographs.water pipes, water supply, engineering, samuel cross, hamilton

A black and white photograph of Diggers from 4 RAR/NZ (ANZAC) form a human chain to unload and store rations and other essential supplies delivered to the field, during search and destroy operations by "Slick" Huey helicopetrs from 9 Squandron, Royal Australian Air Force.photograph, 9 sqn, 4 rar nz, raaf, huey helicopter, gibbons collection catalogue

Advertisement for Freemans Staff Dance at the 'new' St Kilda Town Hall on 4 September 1940 with proceeds going to the St Kilda Patriotic Society. The St Kilda Town Hall opened in 1890 in incomplete form, comprising only the hall, the front wing and Carlisle Street wings. In 1925 the portico and elaborate internal stair-hall were added. In 1939 an addition on the Brighton Road side, including a new Art Deco style Council Chamber, was built.Poster on white paper (discoloured with age) printed in black on one sidest kilda patriotic society, st kilda town hall, freemans dances, wwii fund-raising

3 NAL - Teepookana - (Mt. Lyell) O 3; 3 NBL - 1st. class saloon car (20) NAL FIRST-CLASS SALOON CAR. Four saloon end-platform cars originally built during 1901–1902 by the Lancaster Railway Carriage and Wagon Company Ltd. for the 3'6" gauge Mt. Lyell Mining & Railway Company in Tasmania and classed O. Converted for use as second-class cars on the 2'6" gauge Puffing Billy Railway during 1965–1966, these cars were reclassified NBL and numbered 1–4. The L recognises their Mt. Lyell origin, No. 1 was kept for use as the Railway's VIP car and was reconditioned to a higher standard. No. 2 was similarly upgraded in 1985 for use on special occasions. In 1989 No. 3 was similarly reconditioned with No. 4 receiving similar treatment in 1995. These cars were re-classified NAL in recognition of their new first-class nature. The Mt Lyell Railway was closed in 1963 and subsequently dismantled, but fortunately several of the locomotives and carriages passed into preservation. Purchased by Puffing Billy Preservation Society from the Mount Lyell Mining & Railway Company in the 1960s, it was converted to 2' 6" gauge. It has since given many years of service on the Puffing Billy Railway. TASMANIAN CARRIAGES & GUARDS VANS No. Builder Type Year built Ex. Location Note NAL 1 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Mt Lyell NAL 2 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Rinadeena NAL 3 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Teepookana NAL 4 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Dubbil Barril Lancaster Railway Carriage and Wagon Co The Lancaster Company was formed in 1863 and owned extensive works on the outskirts of Lancaster where it produced railway rolling stock of all descriptions, tram cars, wheels and axles, etc and had a reputation for work of a very high-class character. In 1902 Metropolitan Amalgamated Railway Carriage and Wagon Co was registered on 18 April and incorporated as a limited company to amalgamate 6 companies including Lancaster Railway Carriage and Wagon Co These works were closed in 1908 when the business was transferred to Ashbury 1st Saloon Carriage Owner Mount Lyell Mining and Railway Company, Queenstown, TAS Builder Lancaster Railway Carriage and Wagon Company Ltd, England Build date 1901 - 1902 Car length 31 ft 4 in (9.55 m) Car weight 11 t (11.18 ton) Gauge Original Narrow: 1,067 mm (3 ft 6 in) Rebuilt Narrow: 762 mm (2 ft 6 in) Configuration Bogie Capacity 1 -3: 20 Passengers 4: 28 Passengers Number in class 4 Numbers Mt. Lyell: O 2 - O 3, O 5, O 6 Puffing Billy: NBL 1 - NBL 4, NAL 1 - NAL 4, Mt. Lyell, Teepookana, Rinadeena, Dubbil Barril First run 1901 No. Name Location In Service Withdrawn Condition Livery NAL 1 Mt Lyell, NBL 1 Puffing Billy Reclassed from O 5. Recoded to NAL 1. Operational NAL 2 Teepookana, NBL 2 Puffing Billy Converted from O 2. Upgraded - 1985. Recoded to NAL 2. Operational NAL 3 Rinadeena, NBL 3 Puffing Billy Converted from O 3. Upgraded - 1989. Converted to NAL 3. Operational NAL 4 Dubbil Barril, NBL 4 Puffing Billy Converted from O 6. Upgraded - 1995. Converted to NAL 4. Operational Historic - Industrial Narrow Gauge railway - Mt. Lyell Mining & Railway Company in Tasmania - 1st Class Saloon Carriage1st. class saloon car made of Timber and steel3 NAL - Teepookanapuffing billy railway

4 NAL - Dubbil Barril - (Mt. Lyell) O 6; 4 NBL - 1st. class saloon car (28) NAL FIRST-CLASS SALOON CAR. Four saloon end-platform cars originally built during 1901–1902 by the Lancaster Railway Carriage and Wagon Company Ltd. for the 3'6" gauge Mt. Lyell Mining & Railway Company in Tasmania and classed O. Converted for use as second-class cars on the 2'6" gauge Puffing Billy Railway during 1965–1966, these cars were reclassified NBL and numbered 1–4. The L recognises their Mt. Lyell origin, No. 1 was kept for use as the Railway's VIP car and was reconditioned to a higher standard. No. 2 was similarly upgraded in 1985 for use on special occasions. In 1989 No. 3 was similarly reconditioned with No. 4 receiving similar treatment in 1995. These cars were re-classified NAL in recognition of their new first-class nature. The Mt Lyell Railway was closed in 1963 and subsequently dismantled, but fortunately several of the locomotives and carriages passed into preservation. Purchased by the Puffing Billy Presevation Society from the Mount Lyell Mining & Railway Company in the 1960s and converted to 2' 6" gauge. It has since given many years of service on the Puffing Billy Railway. TASMANIAN CARRIAGES & GUARDS VANS No. Builder Type Year built Ex. Location Note NAL 1 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Mt Lyell NAL 2 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Rinadeena NAL 3 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Teepookana NAL 4 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Dubbil Barril Lancaster Railway Carriage and Wagon Co The Lancaster Company was formed in 1863 and owned extensive works on the outskirts of Lancaster where it produced railway rolling stock of all descriptions, tram cars, wheels and axles, etc and had a reputation for work of a very high-class character. In 1902 Metropolitan Amalgamated Railway Carriage and Wagon Co was registered on 18 April and incorporated as a limited company to amalgamate 6 companies including Lancaster Railway Carriage and Wagon Co These works were closed in 1908 when the business was transferred to Ashbury.Historic - Industrial Narrow Gauge railway - Mt. Lyell Mining & Railway Company in Tasmania - 1st Class Saloon Carriage1st. class saloon car made of Timber and steel4 NAL - Dubbil Barrilpuffing billy railway, narrow gauge

Legion of ex Servicemen and Women - Wangaratta Branch Honour Board containing names of Office Bearers from 1985 to 2002.The Australian Legion of Ex-Servicemen and Women (Vic) Ltd (The Legion) is an ex-service based not for profit association. Formed in December 1944 from a number of existing organisations, membership of the legion is open to all ex-service personnel, including British Commonwealth and Allied personnel, and former members of the peace-time Australian regular and reserve forces, their families, relatives and other persons who abide by and are accepted in accordance with the Constitution.Solid piece of wood with gold writing, has five columns listing the year President, Vice-President Secretary, Treasurer, dating from 1985 to 2002.Legion of ex-servicemen & women, Wangaratta Branch, 1985 - 2002. Signware 5721 2430. wangaratta, legion, ex-servicemen & women

The Australian Cycling Corps was formed in Egypt in 1916 as part of the Australian Imperial Force (AIF), and fought on the Western Front in France and Belgium during World War I. They were used mainly as despatch riders, while also conducting reconnaissance and patrolling. It was disbanded in 1919.When the Australian Imperial Force (AIF) was reorganised and expanded in Egypt in 1916 following its evacuation from Gallipoli, each of its five infantry divisions was allocated a company of cyclists Green coloured bicycle complete with mud guards over front and rear wheels with carrier attached.dispatch riders bicycle, ww1, australian cycling corps

Members of the 2/24th Battalion marching in Wangaratta. The Unit was raised in Wangaratta in July 1940 and the photograph was taken in late 1940 prior to overseas deployment to the middle east during WW2The 2/24th Battalion was an infantry battalion of the Australian Army, which served during World War II .A unit of all-volunteers, it was formed in July 1940 from primarily Victorian volunteers and was known as "Wangaratta's Own" because of the time the battalion spent in the town during its formative period prior to deployment overseas. It served in North Africa in 1941–1942 as part of the 26th Brigade, which was assigned to the 7th Division, before being reassigned to the 9th Division. In early 1943, the battalion returned to Australia and later took part in campaigns against the Japanese in New Guinea in 1943–1944 and Borneo in 1945, before being disbanded in 1946. The 2/24th suffered the highest number of casualties of any 2nd AIF infantry battalion. The Unit was granted the Freedom of the City by the Rural City of Wangaratta in 1990 and one of the first, if not the first, to receive this type of honour. Reproduced photograph of soldiers marching along street lined with parked vehiclesHandwritten on rear - 2/24th Marching in Wangaratta late 19402/24th battalion, wangaratta