The State Electricity Commission Sub-Branch of the RSL convened a commemoration service for Sir John Monash on Sunday 16 April 1972, which took place at the equestrian statue of Monash at the Shrine. The MC was Legatee D.J. Simonson (President 1970 and great nephew of Sir John), who also laid a wreath on behalf of Melbourne Legacy, and the address was given by Dr. J.A.L. Matheson, Vice Chancellor of Monash University. Matheson spoke of the establishment of the University in 1958 and how appropriate it had been to name it after Monash, comparing the struggle to create a world class university with Monash's struggles on the Western Front. Appropriately Monash had been chairman of the constructing body of the Shrine. In 1923 he was approached to become the first President of Legacy, a position which he declined as he was heavily involved as the Chairman of the State Electricity Commission. However, he pressed Colonel Harold Cohen, to take his place and Cohen became Legacy's first President.Legacy still takes part in RSL commemorations, and the links with Monash and the Shrine make this ceremony all the more noteworthy.01299 Seven sheets of black typing on white paper 01299.1 Folded card and paper insert, black print on white 01299.2 Outside of folded card, pale greyjohn monash, wreath laying ceremony

A book written by Myann Burrows and published by Brisbane Legacy about the Legacy children's residence Moorlands. It was written to commemorate the 50th Anniversary of the first children to arrive at Moorlands Legacy's War Orphans' Home. It operated for 23 years until 1969. The children labelled themselves Moorlands Kids and had frequent reunions and contact with each other over the years. The house was initially built in 1892 and during World War 2 it served as General Blamey's headquarters. It was purchased in March 1945 though the Army didn't vacate until January 1946. Miss M Netterfield was appointed matron and Mrs Dethridge as sub-matron. In July 1946 17 boys moved in and by end of August there were 28 children. It was officially opened by Governor of Queensland, Sir John Lavarack on 27 February 1947 which Legatee Savige spoke at, there is a photo in the collection. It was sent to Melbourne Legacy by Mrs Pip Cooper, of Brisbane Legacy.A record of the operation of Moorlands published by Brisbane Legacy.Paperback book about Moorlands by Brisbane Legacy.residences, moorlands

Sidney and Ivy-Jane Browne purchased the Lower Plenty ‘Golf Club’ Hotel in 1940. They owned it until 1943. Their daughter, Irene Stella, was born in Eltham in July 1923 and would have been between 17 and 20 years of age at the time this photograph was taken. Ivy-Jane (nee Williams) was born in Eltham in December 1899 and was the sister of George Alfred Williams who is commemorated on the WWI plaque at the back of St. Margaret’s church, Eltham, and whose name is also listed on the Cenotaph in front of the Eltham War Memorial in Main Road, Eltham. Irene Browne married Leslie Allan Walker in 1945 and following his death in 1958 she married Charles William Smith. She died in 2008 and is buried in Omeo Cemetery along with her husband, Charles Smith. Her granddaughter, Veronica Gunn, advises a few years earlier, Irene’s son took her to the hotel and spoke with the then owner who showed Irene the photo, which she confirmed was of herself. Digital filelower plenty, lower plenty hotel, hotels, irene stella browne, irene stella smith, golf club hotel, 1940s

Bank on the north west corner of Sturt and Lydiard Streets. I suspect that these are photographs before the celebrations for the coronation. See The Argus 13 May 1937 "Celebrations in Many Country Towns" Ballarat Celebrations BALLARAT Wednesday - Special Coronation celebrations were largely attended In the morning there was a service In Christ Church, at which representatlves of the council and other public bodies were present There was a similar gathering in St Andrew's Kirk At a civic service in the Alfred Hall in the afternoon the address was given by the Bishop of Ballarat (the Right Rev W Johnson). Bishop Johnson spoke of the personal association of King George V with his people, and said that the present King and Queen would be equally concerned with the welfare of their subjects The Revs H A Horsfall and B E Williams co-operated In the service, which was presided over by the Mayor (Councillor J Pryor) Mr Lloyd Lindsay recited Mase?Coronation ode and Miss W Ritchie sang "Land of Hope and Glory ' At night a Coronation concert was held in the Alfred HallSmall black and white photographB 249 on versomax walters, ballarat, 1937, celebrations, bank, sturt street, lydiard street, anniversary

Knitted by the donor's grandmother, Elsie Hone. Knitted using bicycle spokes as knitting needles. Elsie Hone (nee Stone) was born in 1890 and died in 1987. She had six children and she apparently knitted this vest for her second son (fifth child), Albert George Hone (b.1914) for his 18th birthday. Albert and his wife Grace had four daughters between 1942 and 1951. The donor's mother, Ina Harriet Nilsson, was born in 1925 (fourth daughter, sixth child of Elsie) and as she had a son, the donor's uncle George (Albert?) passed it on to her. Both the donor's elder brothers wore and out-grew the vest and eventually it was passed on to the donor, Ray Nilsson. The vest was worn for many years while the donor worked at VACC Insurance Co Ltd in St Kilda Road, Melbourne and in the North Sydney, Canberra and Dandenong offices and it was a talking point as he recalled the story. (Information provided by the donor)Fair Isle patterned hand-knitted vest in beige, brown, yellow, green and red.vest, hand-knit, fairisle, elsie hone, great depression, albert george hone, ray nilsson

Rosemary Myers spoke about Lizzie Daley in May 2012. She described the house as having lots of ornaments, and how she enjoyed going thereto buy ribbons and laces for a pair of baby booties she knitted for her school handwork at Melton P S 430. Margaret Nolan's memories of Lizzie: When we were young kids we would go down to visit our cousins, the Myers who lived on the Highway. My great grand mother Mary Luby lived in Reserve road when she came to Melton, she was married here in 1857. Her sister Ann nee Dowling was married to Henri Miers [Myers] in 1867. Her other sister Eliza married William Daley in 1862. He had a Bootmakers shop in the High street. Their daughter Lizzie later turned it into a haberdashery shop. We would go there to buy sewing threads and ribbons. Margaret nee Nolan Brooks memories recorded on the 20th September 2013 Book was from Lizzie Daley's shop in High Street, Meltonlocal identities

Copy of the original photograph. Original names provided by Betty Bradley. Names were checked by Elly Berryman and her mother, Charlotte Berryman nee Cleeland. 2nd June 2020 Elaine Alexander 4/6/2020Cowes State School No. 1282. (1941). Back Row: Miss Peters, Norman Burton, Neville Cleeland, Bill Davie, Lesley Bain, John Reid, Peter West, Ben Humphries, Alan Cleeland, Kevin Spokes, George Regos, Mr Shaw 2nd Back Row: Isobel Niven, Enid Nelson, Betty Bradley, ??, ??, Heather McLardy, Helen Murdoch, Betty Morrison, Eris Gawith, Fay Schrieber, Lois Barton, ??, Jean Denham. 2nd Front Row: Claire Loton, Charlotte Cleeland, Vivian Cleeland, Marie Regos, Coral McLardy, Shirley Matthews, Dawn Smith, Pat Watchorn, Heather Burton, Ruth Grayden, Deidre Cleeland, Verna Gawith, Pat Smith. Front Row: Gerald Jeffrey, Peter Gerraty, ??, Bill Broadbent, Jim Broadbent, Michael Dixon, Bob Davie, ??. Apologies if names are incorrect or mispelt. Tall boy in back row may be Harry (Peter) Harris.cowes state school 1941, betty bradley

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Piano Box Buggy replicates the vehicle that enjoyed respect from the public during the 1880 and early 1900's. A model of a red and black Piano Box Buggy c.1860 which was a lightweight two wheeled one passenger open horse drawn carriage with a black canopy roof where the driver sat behind. It has two large and two smaller gold painted spoked wheels with black rims, brown painted seating, two gold coach lamps and a black patterned footrest in front of the driver. The canopy has thin gold struts to open and close it depending on the weather. There are two long brown wooden shafts on each side to surround the horse. It has a model of a biscuit coloured horse with a white tail and mane with the necessary horse tack for carriage use to help the driver communicate with the horse. It was also known as the 'Bonner Buggy' and had many variations. Coach builders designed and made their own style, giving it their own name. There could have been scores of different Piano Box buggies.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses

Photos of the launch of Legacy Week in 1991. The guest speaker was Sir Zelman Cowan, a former Governor General of Australia. The launch was in the Crest International Hotel in St Kilda on 3 September 1991. Sir Zelman spoke movingly on the work of Legacy and on the dramatic world events: the Gulf War; the reunification of Germany; the changes within the Soviet Union and his speech was warmly received by all who attended. The speaker and head table are under the Legacy Banner - which says "Legacy Caring for Australia's Biggest Family". The same banner is used at an event in Melbourne City Square - see 000491 (from the same roll of film). President John Sullivan is on the head table and is also in a photo at the Eternal Flame (000493 from the same roll of film). Part of a Legacy Appeal or Badge week launch in 1991. Seems to have fallen of a scrapbook of photos compiled by Legacy of major events in the 1980s and 1990s and deposited in the archive cabinets along with many other items and photos prior to the start of the cataloguing. See other photos at 01581.A record of a Legatee event to launch Legacy Week in 1991.Colour photo of the launch of Legacy Week 1991 at the Crest International.legacy appeal, legatee event, badge appeal

In 1977, artist Annette Meikle undertook a commission to illustrate a book recording stories of places and people in the Bayside area. It was published in 1978 as Sandringham Sketchbook, with text by Elizabeth Waters. The sketches were intended to record remaining examples of Bayside’s early architecture and environment, as well as reflect newer architectural changes. Meikle went on to donate 22 of these sketches to Bayside City Council in 2003. Tasmanian architect J.H. Esmond Dorney developed this ground-breaking design for the Sandringham Hospital, which opened in 1964. Dorney had spent significant time recuperating in hospital in the post-war years and developed a special interest in hospital design. The hospital included circular wings with nurses’ stations at the hub and wards radiating outwards like spokes on a wheel. The hospital included 100 beds, two operating theatres and four delivery rooms and baby nurseries. Each ward of two to four beds had its own bathroom, and featured wide windows with garden views. The design was considered radical at the time and was copied as far afield as England and the United States.Annette Meikle, Sandringham Hospital 1977, ink and watercolour, 25.5 x 35.5 cm. Bayside City Council Art and Heritage Collection. Donated by the artist, 2003annette meikle, sandringham sketchbook, elizabeth waters, sandringham hostpital, jh esmond dorney, hospital, architecture, sandringham

Photos of a procession of widows and legatees to the Shrine in 1985 also of the church service in St Paul's before hand. The Legacy President Bannister is behind Legatee Geoff Swan holding the Legacy flag. The University of Melbourne choir is shown behind the Dean of St Paul's. The Melbourne Legacy Widow's Club president, Mrs Alma Sumner, spoke and also laid a wreath at the Shrine. One photo is of Pilgrimage Marshall Legatee Frank Burton. The pilgrimage was lead by a bag piper, Ian McKenzie and Standard bearer from Legacy Leadership Group (an older junior Legatee). Inside the Shrine the Shrine Trustee, Sir Alfred Kemsley stands with President Bannister and Widow President Mrs Alma Sumner and Legatees Conor MacGillycuddy and Alf Argent. Sometimes referred to as Widows' Sunday it is an annual event for Legacy widows, usually at the start of Legacy Week, which is the first week in September. The church used for the service varies. These photos were in an album of photos from 1993. The album was not archive quality, with self adhesive pages, so photos have been transferred and album discarded.A record of the Widows' Sunday events for the Legacy Week in 1985.Colour photo album x 10 leaves of self adhesive cardboard with 17 photos of a pilgrimage to the Shrine in 1985.Caption on title page; 'A photographic record of events of Commemoration. From Sunday, 1st September - First day of Legacy Week, 1985. Commencing with the Morning Service at St. Paul's Cathedral, and then onto the Pilgrimage to the Shrine.'pilgrimage, wreath laying ceremony, widows' sunday

Photos of a procession of widows and legatees to the Shrine in 1985 also of the church service in St Paul's before hand. The Legacy President Bannister is behind Legatee Geoff Swan holding the Legacy flag. The University of Melbourne choir is shown behind the Dean of St Paul's. The Melbourne Legacy Widow's Club president, Mrs Alma Sumner, spoke and also laid a wreath at the Shrine. One photo is of Pilgrimage Marshall Legatee Frank Burton. The pilgrimage was lead by a bag piper, Ian McKenzie and Standard bearer from Legacy Leadership Group (an older junior Legatee). Inside the Shrine the Shrine Trustee, Sir Alfred Kemsley stands with President Bannister and Widow President Mrs Alma Sumner and Legatees Conor MacGillycuddy and Alf Argent. Sometimes referred to as Widows' Sunday it is an annual event for Legacy widows, usually at the start of Legacy Week, which is the first week in September. The church used for the service varies. These photos were in an album of photos from 1993. The album was not archive quality, with self adhesive pages, so photos have been transferred and album discarded.A record of the Widows' Sunday events for Legacy Week in 1985.Colour photo x 14 of a pilgrimage to the Shrine in 1985 and white paper labels.Title page is paper with black type, 'A photographic record of events of Commemoration. From Sunday 1st September - First day of Legacy Week, 1985. / Commencing with the Morning Service at St. Paul's Cathedral, and then onto the Pilgrimage to the Shrine.'pilgrimage, wreath laying ceremony, widows, widows' sunday, colin bannister, alf argent

Clothing. Fine white linen fabric. A .8 cm 'tuck' edged at top and bottom with a spoke-stitched border, marks the waistline. Below the waistline is a peplum, split at the centre front with 8 cm deep peaks. These peaks are repeated at the centre back. The peplum tapers to 7 cm deep at side seams. The camisole is trimmed at the top edge with a 4 cm deep band of cotton lace. The top edge of the linen fabric has a double row (off set) of cotton embroidered 'spots' 2 mm in diameter, and three rows of drawn thread work - one cm in width, 3.5 cm wide lace form the shoulder straps. The back opening fastens with six tiny 7cm pearl buttons, and hand-stitched button holes. The lower button fastens with a loop at the waistline 1880-90's. A 'fan' of pintucks, arched from 4 cm long at the ends, to 6 cm long at the centre, fans the midriff at the centre front, above the waistline - 28 tucks in total.costume, female, camisole.

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a two horse drawn enclosed Hansom Cabriolet replicates the vehicle that enjoyed respect from the public from c.1833 until 1935. A model of a black enclosed coach which is a four wheeled passenger horse drawn vehicle where the driver sits at the front behind the two white horses. It has two large and two smaller gold painted spoked wheels with black rims and gold mudguards on the rear wheels, two gold painted coach lamps, red vinyl padded seating and four open windows with rolled up blinds. There are two doors with a step for easy access into the coach. A long brown wooden shaft separates the horses as well as the necessary horse tack for carriage use to help the driver communicate with the horses. A hand operated brake pad is on the rear wheels. The first Hansom Cabs were clumsy, dangerous awkward vehicles. The drivers were suspected of 'Rude Bohemia'. It took the refinement of Joseph Aloysius Hansom himself to clear airs and remodel the cab to a safe vehicle. It enjoyed respect from c.1833 until 1935. It came in four types.replicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, road transport, coaches

On the 14th of October 2023, Australians were asked to vote on a proposal to change the wording in the constitution 'To recognise the First Peoples of Australia by establishing an Aboriginal and Torres Strait Islander Voice.’ Only 39.9 per cent of legal votes were in favour of this change, and there was not a majority in any of the six Australian States (there was a majority, however, in the Australian Capital Territory). On the 26th June, 2023 Councillors with the The City of Greater Bendigo discussed their position on The Voice to Parliament and decided to support the Yes campaign while pledging to provide information on both sides of the debate to residents. Cr Margaret O’Rourke introduced the motion and spoke at length about the importance for Council to adopt the recommendation. “Recognising the Aboriginal and Torres Strait Islander voice in the constitution ensures that Indigenous Australians have a direct and meaningful role in shaping policies and laws that impact them'. Several Councillors voiced their concern over whether the City could formally support one side of the debate, while seeking to provide neutral information saying that it did not pass the commonsense test. These badges were collected at an event at Rosalind Park on the 27th of September, 2023 attended by Linda Burney, Minister for Indigenous Australians who addressed the crowd.Large badges with YES printed in centre. city of greater bendigo reconcilliation, dja dja wurrung

Eltham Courthouse Officially Reopened (Jim Connor, EDHS Newsletter No. 263 April 2022) In the Conservation Management Plan prepared in 2006 for the Eltham Justice Precinct there is mention that more than 350 court houses have been built by the Public Works Department since 1856, when the Department was established. It also states Eltham was in an early group of 'Victorian Free Classical' structures, featuring a projecting entry porch and gabled roof. Characteristically, this group shares a simple, rectangular shape, central placement of the court room with smaller-scale offices set back at the sides or rear of the court room, arched openings, and decorative string courses. The Statement of Significance listed in the Victorian Heritage Register states: ‘The Eltham Court House dates from the time when the town was largely self-contained. It was initiated in response to itinerant gold prospectors who turned to crime when their quest was unsuccessful. This type of localised solution is characteristic of the self reliance preserved in Eltham today. The court house is an important symbol of the spirit which makes Eltham distinctive as a community.’ It also states: ‘The Eltham Court House, built in 1860, is one of only two intact examples in the state of this simple design with projecting entry.’ So with this background it is most appropriate this valued historic building has recently been the subject of a total restoration, as detailed in previous newsletters. This was a major project undertaken by Nillumbik Shire Council. At a small function in the Eltham Courthouse, on 23rd March 2022, Nillumbik Shire Council Mayor Fran Eyre declared the fully restored building officially reopened. In doing so the Mayor spoke about the earlier law and order function of the court and the importance of this building to the Eltham community. Wingrove Ward Councillor Geoff Paine then highlighted the importance of historical societies and groups within the shire and their valued activities in recording and preserving their local history. EDHS president Jim Connor thanked everyone involved with the project and provided an overview of the history of the courthouse. Michael Ioannides, Council’s project manager, spoke about how the restoration process proceeded and those involved in undertaking the works required. Cr. Natalie Duffy, various council officers, EDHS executive committee members, as well as representatives of the head contractor Ducon Building Services and the heritage advisors, RBA architects and Conservation Consultants, were also in attendance, as was a representative of Nillumbik U3A. After the formal part there was some light hearted interpretation of how past legal proceedings may, or may not have, occurred within this courthouse, before some refreshments were shared in the former second courthouse at the rear, which is now utilised by Nillumbik U3A. This was a successful celebration of a very worthwhile project.Born digital image (38)conservation consultants, cr. geoff paine, cr. natalie duffy, ducon building services, eltham courthouse, eltham district historical society, eltham justice precinct, jim connor, mayor cr. fran eyre, michael ioannides, nillumbik shire council, nillumbik u3a, opening ceremony, rba architects, restoration project

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top. An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Iron; small flat domestic iron.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, iron, flat iron, domestic iron, laundery, ironing equipment, sad iron

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with traces of original black finish on handle. Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. The Director of the Women's Bureau, Ms Jenni Neary spoke on Federal Initiatives in Occupational Safety and Health at the Newcastle Working Women's Centre. She emphasised the importance of including women's groups in the consultations being held around Australia. This was a significant recognition of the specific health and safety problems faced by women in the labour force.A4 page printed both sidesBarbara Fergusson viosh, victorian institute of occupational safety and health, federal department of employment and industrial relations, director of the women's bureau, newcastle working women's centre, jenni neary, information officer, barbara fergusson, consultations

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with stand None item too badly corrodedflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose

A draw knife is a hand tool that has a long straight blade between two handles. As implied by its name. it is drawn like a knife across the wood. It is used to prepare the timber for the next step of the process, removing loose wood and bark and giving a start to making the wood into a round or cylindrical shape. Then a finer smoother finish is given with a spokeshave, which has a shorter, curved blade. A draw knife could be used for the wooden spokes for cart, wagon and carriage wheels as well as for ladder staves and ship wheels. Features of a good draw knife include tight handles, a blade with plenty of metal to it and a blade length of 20 to 24 centimetres. This draw knife was likely made at least 150 years ago by C Johnson of Sheffield, who used the Trade Mark “C.J.” within a flag. Christopher Johnson began work as a cutler, making knives, pocket knives and tableware in his works at Howard Street in Sheffield. In the book ‘Hand-Saw Makers of Britain by Schaeffer and McConnel, Johnson is listed in 1855 as a saw maker. A later reference has the business name of Johnson & Company, Sheffield in 1879-1882. Australia was one of the company’s markets. The company continued until its closure in 1955.This draw knife is significant for being made in Sheffield, a location famous for steel and silver manufacturers. It is significant because of its age, being made no later than 1879, which is the time period of our maritime Village. It is a tool most suitable for the blacksmith's or a ship' smith's workshop for making spokes for the wheels of wagons and carts, and for making ship's wheels.. It is also significant for being made by C Johnson, who was well known for his good workmanship. Draw knife; flat cast steel fixed blade with rotating wooden handles each end. Round bulbous handles have two parallel scored lines around the end furthest from the blade and a brass collar between the handle and blade. A logo and inscription are cast into the centre front of the blade. Made by C Johnson. of Sheffield.Cast into steel blade: Sideways Image “C.J.” within {flag}, “JOHNSON / CAST STEEL”flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, spokes, wagon maker, blacksmith, cart maker, cart wheel maker, blacksmith tool, wagon wheel, c johnson, sheffield, wheelright, craftsman, woodwork, carriage wheel, ship wheels, shipwright, wooden spokes, ladder staves, draw knife

This type of wrench or spanner was used as a service tool for H. V. McKay Pty. Ltd. manufactured agricultural machinery. This specific tool belonged to Albert (Bert) Montgomery of 11 Kamarooka St, Albion. Bert Montgomery was born in Sunshine and in 1910 was apprenticed as a carpenter with Sunshine Harvester Works, where he worked as a wood machinist. On 19 August 1914, while still an apprentice, he enlisted in the First AIF. He left McKay's and started business as a builder probably just prior to WW2. After the war he joined the Shire of Braybrook as Assistant Building Surveyor until he retired. In 1962 Bert and his friend Jack Causon (proprietor of an Anderson Road second hand store that previously was Les James grocery) were on a fishing trip to Lake Tooliorook (aka Ettrick) near Lismore, Victoria. Their boat capsized and both fishermen were drowned. Bert was a Past President of Sunshine RSL and at that time it was reported that his funeral was the largest that Sunshine had seen. The information about Bert Montgomery was supplied by a Committee member of the Sunshine & District Historical Society Inc. who spoke to Montgomery's daughter, who also donated the tool. This tool serves as a reminder of the large H. V. McKay agricultural manufacturing works that once existed in Sunshine. The tool is associated with the works, and the design is significant enough for images of the tool to be used in an artistic mural, which is painted on the Eastern Pillar of the new H. V. McKay Footbridge in Sunshine, Victoria 3020.Curved double ended rusty cast iron wrench with 4 open slots plus 2 closed slots'H V McKAY' on one side and 'D324' on the reverse sideh. v. mckay pty. ltd, d324, d324 wrench, d324 spanner, agricultural spanner, antique wrench, agricultural tool, albert montgomery, jack causon, lake tooliorook

Words on the building on the south west corner of Sturt Street are visible. "NATIONAL MUTUAL BUILDING". This building was used by Mark's Jewellers, and then Allan Bros. Jewellers. The next building has the writing "ARGUS" and Printers, Bookbinders, Stationers, on it. This was known as Berry Anderson's. I suspect that these are photographs before the celebrations for the coronation. See The Argus 13 May 1937 "Celebrations in Many Country Towns" Ballarat Celebrations BALLARAT Wednesday - Special Coronation celebrations were largely attended In the morning there was a service In Christ Church, at which representatlves of the council and other public bodies were present There was a similar gathering in St Andrew's Kirk At a civic service in the Alfred Hall in the afternoon the address was given by the Bishop of Ballarat (the Right Rev W Johnson). Bishop Johnson spoke of the personal association of King George V with his people, and said that the present King and Queen would be equally concerned with the welfare of their subjects The Revs H A Horsfall and B E Williams co-operated In the service, which was presided over by the Mayor (Councillor J Pryor) Mr Lloyd Lindsay recited Mase?Coronation ode and Miss W Ritchie sang "Land of Hope and Glory ' At night a Coronation concert was held in the Alfred Hall6.5cm H x 8.5 cm Wmax walters, ballarat, 1937, celebrations, national mutual building, sturt street, anniversary

An article titled 'Legacy Founder Honored', that mentions the speech by Legatee Brian Armstrong delivered as the Savige Memorial Oration at the Federal Conference of Legacy Clubs in Canberra on 22 October 1954. The speech is a full account of Savige's life, his war service and his role in Legacy. Legatee Armstrong was a good friend of Savige. The moving address described General Savige's life and service career, and how he formed Legacy in 1923 at the suggestion of his former Commander, Major General Sir John Gellibrand, He said at the time of his death the late General had been a member of Legacy for 30 years, and had been chosen to represent Legacy at the Coronation of Queen Elizabeth. Following the Second World War he held many important posts, one of the most notable being Co-ordinator of Demobilisation. Legatee Armstrong told the conference that if a memorial to the founder of Legacy was required, they only had to look around themselves. The second article on the same page is titled 'Legacy Conference Opened' and mentions the Governor General Sir William Slim, opening the conference in Canberra and some of the topics he spoke on. There are three copies of the Savige Memorial speech in the archive.A record of the life and service of Legatee Stan Savige.Front page of the Daily Advertiser on 23 October 1954 with two articles about the Legacy conference, one of which was about the memorial oration for Stan Savige given by Brian Armstrong.stan savige, conference

The ship building company E. & A. Sewall, from Bath, Maine, USA, built many ships that had wheels with the same decorative, starburst pattern on them as this particular wheel segment, including the Eric the Red. The wheel was manufactured by their local Bath foundry, Geo. Moulton & Co. and sold to the Sewall yard for $100, according to the construction accounts of the vessel. Eric the Red was a wooden, three masted clipper ship. She had 1,580 tons register and was the largest full-rigged ship built at Bath, Maine, USA in 1871. She was built and registered by Arthur Sewall, later to become the partnership E. & A. Sewall, and was the 51st ship built by this company. The annually-published List of Merchant Vessels of the U.S. shows that Bath was still the home port of Eric the Red in 1880. The vessel was named after the Viking discoverer, Eric the Red, who was the first European to reach the shores of North America (in 980AD). The ship Eric the Red at first traded in coal between America and Britain, and later traded in guano nitrates from South America. In 1879 she was re-metalled and was in first class condition. On 10th June 1880 (some records say 12th June) Eric the Red departed New York for Melbourne and then Sydney. She had been commissioned by American trade representatives to carry a special cargo of 500 exhibits (1400 tons) - about a quarter to a third of America’s total exhibits - from America for the U.S.A. pavilion at Melbourne’s first International Exhibition. The exhibits included furniture, ironmongery, wines, chemicals, dental and surgical instruments, paper, cages, bronze lamp trimmings, axles, stamped ware, astronomical and time globes, samples of corn and the choicest of leaf tobacco. Other general cargo included merchandise such as cases of kerosene and turpentine, brooms, Bristol's Sarsaparilla, Wheeler and Wilson sewing machines, Wheeler’s thresher machine, axe handles and tools, cases of silver plate, toys, pianos and organs, carriages and Yankee notions. The Eric the Red left New York under the command of Captain Z. Allen (or some records say Captain Jacques Allen) and 24 other crew including the owner’s son third mate Ned Sewall. There were 2 saloon passengers also. On 4th September 1880 the ship had been sailing for an uneventful 85 days and the voyage was almost at its end. Eric the Red approached Cape Otway in a moderate north-west wind and hazy and overcast atmosphere. Around 1:30am Captain Allen sighted the Cape Otway light and was keeping the ship 5-6 miles offshore to stay clear of the hazardous Otway Reef. However he had badly misjudged his position. The ship hit the Otway Reef about 2 miles out to sea, south west of the Cape Otway light station. Captain Allen ordered the wheel to be put ‘hard up’ thinking that she might float off the reef. A heavy sea knocked the man away from the wheel, broke the wheel ropes and carried away the rudder. The sea swamped the lifeboats, the mizzenmast fell, with all of its rigging, then the mainmast fell and the ship broke in two. Some said that the passenger Vaughan, who was travelling for his health and not very strong, was washed overboard and never seen again. The ship started breaking up. The forward house came adrift with three of the crew on it as well as a longboat, which the men succeeded in launching and keeping afloat by continually bailing with their sea boots. The captain, the third mate (the owner’s son) and others clung to the mizzenmast in the sea. Then the owner’s son was washed away off the mast. Within 10 minutes the rest of the ship was in pieces, completely wrecked, with cargo and wreckage floating in the sea. The captain encouraged the second mate to swim with him to the deckhouse where there were other crew but the second mate wouldn’t go with him. Eventually the Captain made it to the deckhouse and the men pulled him up. At about 4:30am the group of men on the deckhouse saw the lights of a steamer and called for help. At the same time they noticed the second mate and the other man had drifted nearby, still on the spur, and pulled them both onto the wreck. The coastal steamer Dawn was returning to Warrnambool from Melbourne, its sailing time different to its usual schedule. Cries were heard coming from out of the darkness. Captain Jones sent out two life boats, and fired off rockets and blue lights to illuminate the area. They picked up the three survivors who were in the long boat from Eric the Red. Two men were picked up out of the water, one being the owner’s son who was clinging to floating kerosene boxes. At daylight the Dawn then rescued the 18 men from the floating portion of the deckhouse, which had drifted about 4 miles from where they’d struck the reef. Shortly after the rescue the deckhouse drifted onto breakers and was thrown onto rocks at Point Franklin, about 2 miles east of Cape Otway. Captain Jones had signalled to Cape Otway lighthouse the number of the Eric the Red and later signalled that there was a wreck at Otway Reef but there was no response from the lighthouse. The captain and crew of the Dawn spent several more hours searching unsuccessfully for more survivors, even going back as far as Apollo Bay. On board the Dawn the exhausted men received care and attention to their needs and wants, including much needed clothing. Captain Allen was amongst the 23 battered and injured men who were rescued and later taken to Warrnambool for care. Warrnambool’s mayor and town clerk offered them all hospitality, the three badly injured men going to the hospital and others to the Olive Branch Hotel, then on to Melbourne. Captain Allen’s leg injury prevented him from going ashore so he and three other men travelled on the Dawn to Portland. They were met by the mayor who also treated them all with great kindness. Captain Allen took the train back to Melbourne then returned to America. Those saved were Captain Z. Allen (or Jacques Allen), J. Darcy chief mate, James F. Lawrence second mate, Ned Sewall third mate and owner’s son, John French the cook, C. Nelson sail maker, Clarence W. New passenger, and the able seamen Dickenson, J. Black, Denis White, C. Herbert, C. Thompson, A. Brooks, D. Wilson, J. Ellis, Q. Thompson, C. Newman, W. Paul, J. Davis, M. Horenleng, J. Ogduff, T. W. Drew, R. Richardson. Four men had lost their lives; three of them were crew (Gus Dahlgreen ship’s carpenter, H. Ackman steward, who drowned in his cabin, and George Silver seaman) and one a passenger (J. B. Vaughan). The body of one of them had been found washed up at Cape Otway and was later buried in the lighthouse cemetery; another body was seen on an inaccessible ledge. Twelve months later the second mate James F. Lawrence, from Nova Scotia, passed away in the Warrnambool district; an obituary was displayed in the local paper. The captain and crew of the Dawn were recognised by the United States Government in July 1881 for their humane efforts and bravery, being thanked and presented with substantial monetary rewards, medals and gifts. Neither the ship, nor its cargo, was insured. The ship was worth about £15,000 and the cargo was reportedly worth £40,000; only about £2,000 worth had been recovered. Cargo and wreckage washed up at Apollo Bay, Peterborough, Port Campbell, Western Port and according to some reports, even as far away as the beaches of New Zealand. The day after the wreck the government steam ship Pharos was sent from Queenscliff to clear the shipping lanes of debris that could be a danger to ships. The large midship deckhouse of the ship was found floating in a calm sea near Henty Reef. Items such as an American chair, a ladder and a nest of boxes were all on top of the deckhouse. As it was so large and could cause danger to passing ships, Captain Payne had the deckhouse towed towards the shore just beyond Apollo Bay. Between Apollo Bay and Blanket Bay the captain and crew of Pharos collected Wheeler and Wilson sewing machines, nests of boxes, bottles of Bristol’s sarsaparilla, pieces of common American chairs, axe handles, a Wheelers’ Patent thresher and a sailor’s trunk with the words “A. James” on the front. A ship’s flag-board bearing the words “Eric the Red” was found on the deckhouse; finally those on board the Pharos had the name of the wrecked vessel. During this operation Pharos came across the government steamer Victoria and also a steamer S.S. Otway, both of which were picking up flotsam and wreckage. A whole side of the hull and three large pieces of the other side of the hull, with some of the copper sheathing stripped off, had floated on to Point Franklin. Some of the vessels yards and portions of her masts were on shore. The pieces of canvas attached to the yards and masts confirmed that the vessel had been under sail. The beach there was piled with debris several feet high. There were many cases of Diamond Oil kerosene, labelled R. W. Cameron and Company, New York. There were also many large planks of red pine, portions of a small white boat and a large, well-used oar. Other items found ashore included sewing machines (some consigned to ‘Long and Co.”) and notions, axe and scythe handles, hay forks, wooden pegs, rolls of wire (some branded “T.S” and Co, Melbourne”), kegs of nails branded “A.T. and Co.” from the factory of A. Field and Son, Taunton, Massachusetts, croquet balls and mallets, buggy fittings, rat traps, perfumery, cutlery and Douay Bibles, clocks, bicycles, chairs, a fly wheel, a cooking stove, timber, boxes, pianos, organs and a ladder. (Wooden clothes pegs drifted in for many years). There seemed to be no personal luggage or clothing. The Pharos encountered a long line, about one and a half miles, of floating wreckage about 10 miles off land, south east of Cape Otway, and in some places about 40 feet wide. It seemed that more than half of it was from Eric the Red. The ship’s crew rescued 3 cases that were for the Melbourne Exhibition and other items from amongst the debris. There were also chairs, doors, musical instruments, washing boards, nests of trunks and fly catchers floating in the sea. Most of the goods were saturated and smelt of kerosene. A section of the hull lies buried in the sand at Parker River Beach. An anchor with chain is embedded in the rocks east of Point Franklin and a second anchor, thought to be from Eric the Red, is on display at the Cape Otway light station. (There is a photograph of a life belt on the verandah of Rivernook Guest House in Princetown with the words “ERIC THE RED / BOSTON”. This is rather a mystery as the ship was registered in Bath, Maine, USA.) Parts of the ship are on display at Bimbi Park Caravan Park and at Apollo Bay Museum. Flagstaff Hill Maritime Village also has part of the helm (steering wheel), a carved wooden sword (said to be the only remaining portion of the ship’s figurehead; further research is currently being carried out), a door, a metal rod, samples of wood and a medal for bravery. Much of the wreckage was recovered by the local residents before police and other authorities arrived at the scene. Looters went to great effort to salvage goods, being lowered down the high cliff faces to areas with little or no beach to collect items from the wreckage, their mates above watching out for dangerous waves. A Tasmanian newspaper reports on a court case in Stawell, Victoria, noting a man who was caught 2 months later selling tobacco from the wreckage of Eric the Red. Some of the silverware is still treasured by descendants of Mr Mackenzie who was given these items by officials for his help in securing the cargo. The gifts included silver coffee and tea pots, half a dozen silver serviette rings and two sewing machines. The wreck and cargo were sold to a Melbourne man who salvaged a quantity of high quality tobacco and dental and surgical instruments. Timbers from the ship were salvaged and used in the construction of houses and sheds around Apollo Bay, including a guest house, Milford House (since burnt down in bushfires), which had furniture, fittings and timber on the dining room floor from the ship. A 39.7 foot long trading ketch, the Apollo, was also built from its timbers by Mr Burgess in 1883 and subsequently used in Tasmanian waters. It was the first attempt at ship building in Apollo bay. In 1881 a red light was installed about 300 feet above sea level at the base of the Cape Otway lighthouse to warn ships when they were too close to shore; It would not be visible unless a ship came within 3 miles from it. This has proved to be an effective warning. The State Library of Victoria has a lithograph in its collection depicting the steamer Dawn and the shipwrecked men, titled. "Wreck of the ship Eric the Red, Cape Otway: rescue of the crew by the Dawn". “The Eric the Red is historically significant as one of Victoria's major 19th century shipwrecks. (Heritage Victoria Eric the Red; HV ID 239) The wreck led to the provision of an additional warning light placed below the Cape Otway lighthouse to alert mariners to the location of Otway Reef. The site is archaeologically significant for its remains of a large and varied cargo and ship's fittings being scattered over a wide area. The site is recreationally and aesthetically significant as it is one of the few sites along this coast where tourists can visit identifiable remains of a large wooden shipwreck, and for its location set against the background of Cape Otway, Bass Strait, and the Cape Otway lighthouse.“ (Victorian Heritage Database Registration Number S239, Official Number 8745 USA) Segment of a ship's wheel, or helm, from the wreck of the sailing ship Eric the Red. The wheel part is an arc shape from the outer rim of the wheel and is made up of three layers of timber. The centre layer is a dark, dense timber and is wider than the two outer layers, which are less dense and lighter in colour. The wheel segment has a vertically symmetrical, decorative copper plate inlaid on the front. The plate has a starburst pattern; six stars decorate it, each at a point where there is a metal fitting going through the three layers of timber to the rear side of the wheel. On the rear each of the six fittings has an individual copper star around it. The edges of the helm are rounded and bevelled, polished to a shine in a dark stain. Around each of the stars, front and back, the wood is a lighter colour, as though the metal in that area being polished frequently. The length of the segment suggests that it has probably come from a wheel or helm that had ten spokes. (Ref: F.H.M.M. 16th March 1994, 239.6.610.3.7. Artefact Reg No ER/1.)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, ship's-wheel, eric-the-red, helm, shei's wheel, ship's steering wheel

The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Cobb and Co coach replicates the vehicle that enjoyed respect from the public during the 1880's. There were four horse drawn models as well.A model of a red Cobb and Co enclosed coach which is a four wheeled passenger horse drawn vehicle where the driver sits at the front behind the two light brown and grey horses. The name ROYAL MAIL COBB.CO is painted in white lettering on both sides. It has four gold painted spoked wheels with black rims, two gold painted coach lamps, black padded seating and four open windows with blinds that are rolled up. There are 2 doors with a drop-down step for easy access into the coach. A long brown wooden shaft separates the horses which also have black leather shaft style straps on both sides as well as the necessary horse tack for carriage use to help the driver communicate with the horses. There is a black wooden slotted luggage rack at the back held on by gold chains. On top of the coach is a decorative gold painted luggage rack. Freeman Cobb established Cobb and Co in Australia in 1853 to operate horse drawn mail and passengers between Melbourne and the Victorian Goldfields. It expanded to Queensland in 1865. ROYAL MAIL COBB.COreplicas, models, scale models, vehicles, carriages, horse drawn vehicles, toy horses, postal services, road transport, goldfields, coaches