This Sharpe Bros. one gallon stoneware Demijohn is in excellent condition and includes its original stopper. It was made between 1904 and 1930, the date from the patent of the handle until the time that the factory no long produced returnable items. The bottle was once part of Dr W.R. Angus' household and is part of the W.R. Angus Collection and could have been purchased from Warrnambool's Sharpe Bros. factory. SHARPE BROS. 1903-1972- The first Sharpe Bros. cordial factory was opened in Dunedin, New Zealand, in 1903 by English prohibition brothers John and Percy Sharpe. Sharpe Bros. made ‘health’ beverages that were non-alcoholic drinks such as ginger beer, ginger ale, lime juice, soda and cordials. The containers of these drinks were not sold with the drinks but were marked as returnable items, to be cleaned and re-used, until this practice ceased in the 1930s. Sharpe Bros. made a niche in the soft drink market by delivering drinks by horse and cart to its customers’ homes. John Sharpe patented the unique wire spiral handle in 1904. By 1905 the New Zealand company also had factories in Australia. By 1910 the company had over 20 factories including Wanganui, New Zealand; Adelaide, Albury, Ballarat, Bathurst, Forbes, Geelong, Goulburn, Lithgow, Melbourne, Newcastle, Orange, Sydney, Tamworth, Warrnambool and Wollongong. The Warrnambool factory was established in 1919 and existed until 1951. The company won awards at Australian exhibitions for its carbonated drinks, including First Prize for its ginger beer made in the Brisbane factory. The company was taken over in 1962 by Tarax Drinks Holdings Ltd, which was in turn taken over by Cadbury Schweppes in 1972. W.R. Angus Collection- The W R Angus Collection spans from 1885 to the mid-1900s and includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. He and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Dr Angus and his wife were very involved in the local community, including the early planning stages of the new Flagstaff Hill, where they contributed to the layout of the gardens. Dr Angus passed away in March 1970.This stoneware Demijohn is connected to the history of Warrnambool, as it was owned by the daughter of Dr W. R. Angus and his wife Gladys. It is part of the W.R. Angus Collection, which is notable for still being located at the site connected to Doctor Angus, Warrnambool’s last Port Medical Officer. It is also connected through its manufacturer Sharpe Bros. which had a branch in Warrnambool from 1919 to 1951, overlapping the time when the Angus family resided there from 1939 to the 1970s. The bottle is also significant as an example of the early-20th-century beverages found in local households and could have been purchased from the local Sharpe Bros. factory.This stoneware Demijohn is glazed, with a brown neck with internal thread and shoulders and a cylindrical cream base. The one gallon bottle has a flat, black stopper with a cork stem and a rubber, threaded tip. The ‘U’ shaped wire carry handle has a spiral of wire around the handpiece. An overhanging lip is on top of the bottle’s short neck above its rounded shoulder. The clay has been joined at the base of the neck, shoulder and body. The underneath is unglazed. The brown glazing on the shoulder has a run mark. Inscriptions are on the stopper and bottle. This container is part of the W.R. Angus Collection.Stamped in black on the shoulder: “KEEP THE / STOPPER TIGHT” Stamped in black on the body: “THIS JAR IS THE ABSOLUTE PROPERTY OF AND MUST BE RETURNED TO SHARPE BROS. AUSTRALIA / & NEW ZEALAND. ORIGINAL & LARGEST HYGIENIC BREWERY. CAUTION Persons Damaging, Willfully Retaining, Trading with or Misappropriating the Use of this Jar WILL BE PROSECUTED “ Stamped in script writing: “Sharpe Bros. TRADE - - - ED “ Embossed on the stopper: “AUSTRALIA AND NEW ZEALAND, SHARPE BROS.”flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, dr w r angus, dr roy angus, dr ryan, sharpe bros., bendigo pottery, bottle, stoneware bottle, demihohn, one gallone bottle, soft drink, non-alcoholic drink, drink container, jar, jug, warrnambool soft drink, hygienic brewery, cordial factory, new zealand, australia, john sharpe, percy sharpe, non-alcoholic, spiral wire handle, ginger beer, w.r. angus collection, demijohn

Military training was never without danger especially when weapons were handled. Risks were assessed during planning and measures taken to minimise hazards. On one occasion the Conducting Officer was injured by a grenade fragment during throwing practice. He was promptly treated by Squadron medics and transferred to hospital.Colour photograph of Grenade Range at Puckapunyal showing Conducting Officer's box, left foreground, and priming and waiting bays and throwing bays.

Military training was never without danger especially when weapons were handled. Risks were assessed during planning and measures taken to minimise hazards. On one occasion the Conducting Officer was injured by a grenade fragment during throwing practice. He was promptly treated by Squadron medics and transferred to hospital.Colour photograph of Conducting Officer's box at Grenade range Puckapunyal taken from waiting bay.

Military training was never without danger especially when weapons were handled. Risks were assessed during planning and measures taken to minimise hazards. On one occasion the Conducting Officer was injured by a grenade fragment during throwing practice. He was promptly treated by Squadron medics and transferred to hospital.Three colour photographs of Captain P. Williams, Adjutant ' A' Squadron 8/13 Victorian Mounted Rifles receiving treatment after he was injured by a grenade fragment at Puckapunyal.

Military training was never without danger especially when weapons were handled. Risks were assessed during planning and measures taken to minimise hazards. On one occasion the Conducting Officer was injured by a grenade fragment during throwing practice. He was promptly treated by Squadron medics and transferred to hospital.Two colour photographs of .50 calabre machine gun training at Puckapunyal conducted by ' A' Squadron 8/13 Victorian Mounted Rifles.Sergeant R. McDonald is the instructor.

A blonde haired boy with glasses and earphone attached to a device strapped to his body, manipulates various boxes with a handle and openings in it. On one box is written 'Not be used without adult supervision'. The wooden boxes are homemade and most likely used at the Burwood school to assist teachers in developing coordination skills in their students.3 digital images of a blonde boy with glasses and a hearing aidrvib burwood school, occupational therapy

Booklet issued for the use by drivers on the then new Bourke St tram line, which commenced on Sunday 26/6/1955. Provides a long list of Do Nots, typical of the time. Gives information to crews about the new trams, their quiet running, and their handling. Has a few "Always" at the rear of the booklet.Demonstrates an information document produced by the MMTB for drivers of the new Bourke Street routes.Booklet - 12 pages printed on light fawn paper, centre stapled.trams, tramways, bourke st, new trams, new tramways, opening, instructions

Wool picking machine designed to separate locks of wool before it is carded and spun. The picker opens the wool’s locks which makes it easier to send the fleece through a carding machine. It does this by teasing the fibres (which can also be done by hand just by pulling the lock structure apart), but a picker does this in bulk and much quicker than what can be done by hand. It is possible to spin fibres directly after the picking stage; however, it is usually more desirable to card and blend them with other fibres. Typically, at a textile mill, a picking machine can separate enough lengths of fibre for a full day’s work after just a single hour. It will also help to remove any vegetation matter or other any unwanted elements that may be present in the wool. The quality of the casting on this machine suggest that it was made locally, either in Australia or New Zealand. Mike Leggett, the donor of the machine, acquired it from New Zealand where the seller said it had been used by his father to pick wool to make hand stuffed horse saddles. Mike attempted to used it a couple of times to pick alpaca hair, but the speed of the attached motor caused damage to the fibres. The motor is thought to be an added attachment, sometime around the 1960s judging by its age, while the machine itself is thought to be dated around the 1920s. The machine works by inserting wool through the rollers. Initially there was a conveyor belt feeder system which was powered by the handle on the side. This conveyor belt has been removed however, most likely due to age and deterioration. Wool is now fed through the initial teeth and is met by a spiked rotating drum which works to separate the fibres. The separated fibres would then complete a loop of the drum before being dispatched somewhere below, around where the motor presently sits, at a rapid rate of speed. Typically this wool will be collected in a closet or large catchment area, as can be seen from the 8:47 minute marker in the linked video (link - https://www.youtube.com/watch?v=kMjx-t3tH3A). It is not apparent how the wool is collected with this machine. Red and green machine with four green legs currently attached to a wooden pallet with wheels for easy movement. The green legs lead up to a red central circular barrel from which many attachments are present. Also present on the wooden pallet is a small black motor which is attached by a rubber belt to the central drum inside the red barrel. The belt spins the wooden drum via a dark red circular plate attached to the side of the drum. On the other side of the red barrel, a green handle extends for turning the picker’s conveyor belt feeder system. Two green walls extend forward from the central red barrel, guarding either side of where the conveyor belt would have been. At the start of these walls is a wooden cylinder, which the conveyor belt would have wrapped around, followed by two interlocking gears which rotate and accept the fed wool. The red roof extends over the central cylinder from here, securing the wool inside and protecting hands from the heavily spiked internal wooden cylinder which rotates and separates (picks) the wool. Extending over the top of this red roof is a green handle which reaches to the back of the machine (not pictured). Here it accepts a weight to ensure pressure is always present for the initial feeder interlocked gear teeth. There are two large gear cogs on the rubber belt side of the machine and 3 small gear cogs on the handle side of the machine, all coloured green. A green handle is also present at the rear of the machine, below the location from which the weight is hanging. A power cable extends from the motor and there are two adjustable metal rods on the top of the machine, the purpose of these rods is presently unknown. Black texter. On top of drum. Wording: HG3707 Wording. Imprint: BRACEWIND BLYN On motor. Wording AEIwool picking, textile manufacturing, wool processing

A spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. Spokeshaves can be made from flat-bottom, concave, or convex soles, depending on the type of job to be performed. They can include one or more sharpened notches along which the wooden shaft is pulled in order to shave it down to the proper diameter. Historically, spokeshave blades were made of metal, and the body and handles were wood. Unlike a draw knife, but like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. By the twentieth-century metal handles and detachable blades had become the most common. A convex, wooden, variant of the spokeshave is called a travisher, at one time mostly used in chair making.A tool of the joiner and other woodworking tradesmen that has been in use since the making of furniture for hundreds of years without much change to the design or how the tool is used to smooth and shape timber.Spokeshave, Marked AH, (believed to be owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Bullets for early firearms were made as lead balls in iron scissor moulds. The moulds had scissor action, with ends shaped as a hollow half-sphere that formed a ball when the handles closed. Melted lead was poured into a small filling hole in the top of the closed mould. When the lead was set the handles were opened and the ball was released from the mould. Excess lead was trimmed using the cutting edge of the mould. The task of pouring the melted lead into the mould had to be performed slowly so that air pockets didn’t form. The shot would have a join line around it, which would make it inaccurate; the join needed to be carefully filed to make the ball into a smooth sphere. Larger quantities of lead shot were often cast in a multi-bullet mould that was used in a similar way. Lead shot mould; cast iron, scissor type metal object with sphere shaped mould at end used to make lead shot balls for a shotgun. Mould has a cutting edge to trim off excess lead.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, firearms, bullet, cast bullet, lead ball, lead shot, scissor mould

Bullets for early firearms were made as lead balls in iron scissor moulds. The moulds had scissor action, with ends shaped as a hollow half-sphere that formed a ball when the handles closed. Melted lead was poured into a small filling hole in the top of the closed mould. When the lead was set the handles were opened and the ball was released from the mould. Excess lead was trimmed using the cutting edge of the mould. The task of pouring the melted lead into the mould had to be performed slowly so that air pockets didn’t form. The shot would have a join line around it, which would make it inaccurate; the join needed to be carefully filed to make the ball into a smooth sphere. Larger quantities of lead shot were often cast in a multi-bullet mould that was used in a similar way. Lead shot mould; cast iron, scissor type metal object with sphere shaped mould at end used to make lead shot balls for a shotgun. Mould has a cutting edge to trim off excess lead.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, firearms, bullet, cast bullet, lead ball, lead shot, scissor mould

72 - Melbourne Tramway & Omnibus Co. Bell Punch No. D1335. A heavy nickel plated steel ticket or fare strip cancelling / registering mechanism used on Melbourne cable trams. When a fare was sold, the bell would ring advising the passenger that their fare have registered. "An ingenious device resembling in principle the ticket punch of a railway porter. It is carried by the conductor who wears pinned to his coat a 'trip-slip'. He punches this once for every fare received; the action is simultaneously registered on a dial inside the punch and bell rings to appraise the passenger of the fact. The punch is provided with a patent lock, the secret of which is known only at headquarters and effective system of check is thus secured." (" A story of the Melbourne Cable Tramway System" - page 54). Used by the MT&O and MMTB until 1922/23 when replaced by the check ticket system. Manufactured by the Railway Register Manufacturing Company. Lock number not known. Has "MT& ..." stamped on one side along with patent dates. 72.1 - as above but for punch number D1338 - added 17/12/12. See also Reg Item 6437 for another sample - punch No. D1902. see - \dbtext\museum\documents\htd242i.pdf for opening instructions. See "A story of the Melbourne Cable Tramway System 11/11/1885 to 26/10/1940" C.N. Govett and A. E. Twentyman. Copy held in the Hawthorn Tramway Depot collection. Has "D 1335" punched above ticket entry slot (both sides), "335" on handle, "MT& ..." stamped on numbering registering face. 72.1 - As above with number "D1338" punched in. The M.T.& Co" is more visible.trams, tramways, ticket punch, tickets, fares, cable trams

Donated to Sub Branch to provide historical and formal elements to Meetings.It is significant to members in as much as it provides a standard of protocol, authority and respect to formal meetings eg the Annual General Meeting.Model in polished wood of a Gavel and Plate. Plate has inscription plate "To The DViets From Mackay Vietnam vets."; gavel has on the side a badge of the Rising Sun and on the top face an insignia of TBA; the handle of the gavel has a decorative snake entwined thereon.diamond valley vietnam veterans sub branch, mackay vietnam veterans qld

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance- Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacityMetal instrument with 2 parts. 1. heavy solid metal cylinder - hollow with 1 section open to fit onto handle 2. long metal hollow 3 sided curved handle spreading out to saddle shape and back on 80 degree angle to wide curve shape. Holes used for tape and tied to stirrups (therefore self retainer).BRITISHMADE between 2 holds on saddlemedical equipment. hospital equipment. tawonga. mt beauty. medical. hospital. nurse. doctor. speculum. auvard.

Milk and cream were stored in steel cans for transportation to stores or local dairy companies.The dairy industry is and ha been one of the major industries in the Kiewa Valley. This cream can belonged to the Creamer family who owned and operated a dairy farm in the Kiewa Valley.Straight sided steel can with movable ring handles at the top on each side.The lid is slightly curved with a hinge on one side and securing clasp on its opposite side with a moveable ring handle attached (to the securing clasp).A plaque is attached on the top with an inscription. It appears one plaque has been removed from the lid and one from the side of the can."A. C. Bryon, Baranduda" on plaque on lid.dairy; cream can; kiewa valley; creamer family

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacityA clear plastic bag with 1. Stainless steel syringe (cylinder) with 2 rings at one end and a small opening at the other. 2. a 3 pronged instrument 2 prongs are handles that squeeze together - the third is curved and attached to one side of the handle. 3. golden coloured curved instrument in the shape of a hollow rectangle with thin attachments at each end. The plastic bag has 'Broken' hand written in red at the top.ear syringe, medical, hospital, tawonga district hospital

Very old. Ref. Pages 6 and 7 Tools for all Trades Catalogue. The braces vary in quality (strength) depending on what materials are used to make them.The brace is a hand operated tool for boring holes in wood, consisting of a crank-shaped turning device. The brace that grips and rotates the hole-cutting tool, the bit.Used by woodworkers in the Kiewa Valley.Vintage hand drill braces. All different and not all complete. Made of cast iron, steel with wooden handles. The drills fit into one end of the brace which is turned to make a drilling motion. A brace is a hand tool used with a bit (drill bit or auger) to drill holes, usually in wood. Pressure is applied to the top while the handle is rotated.brace and bit, woodwork, hand drilling

The seal was used in the Warrnambool Cheese & Butter Factory Co Ltd office for stamping legal documents. It is not known when it became obsolete and housed in a glass case for safekeeping.The Seal is historically significant as it relates to the formation of the WCBF in 1888 and used for legal documents. Until 2013 the Warrnambool Cheese & Butter Factory was the only remaining independently owned butter factory in Victoria. The company was taken over by Canadian company Saputo in 2013. It is artistically significant as the surface of the arm of this functional cast iron Seal features a gold design. The seal is made of black painted cast iron. The flat base has a gold-painted border. The curved iron arm to which a wooden handle is attached has a swirling scroll pattern on the side. The seal component consists of a round base and a round iron stamp attached to the handle mechanism. The seal is housed in a glass case with a small name plate at the front.Name plate: Warrnambool Cheese & Butter Factory Co Ltd 'Original Company Seal'allansford, warrnambool cheese & butter factory company ltd, company seals, office equipment

A hand trolly can be loaded with heavy objects such as luggage, produce, and equipment and the objects can then be easily wheeled from one place to another. They are used by farmers, railway workers, shipping companies, porters, factory labourers and other industries when heavy loads need to be moved. Hand trolleys were first used in the 18th century by young workers at the docks. The new equipment used leverage and wheels, enabling them to move the same heavy loads that the men were moving. This hand trolley is an example of the hand trolleys used since the 18th century to move heavy loads at the docks and shipyards. It is associated with the maritime industries of shipping, transportation, travel and trade as with the primary production sectors of farming, markets and produce. Hand trolley; an L-shaped handcart with handles at one end, wheels at the other, and a ledge to hold the load. This hand trolley has orange wooden slats and handles, two metal wheels and a black metal frame. It has supporting legs at one end, two metal flanges near the wheels and a support foot at the bottom. There is an inscription on the metal at one side.Stamped into metal: "MSSC"warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hand trolley, sack truck, trolley, luggage trolley, hand truck, trundler, sack barrow, bag barrow, leverage, marine technology, cargo handling, docks, wharft, shipping, trade

Brown grained leather - Animal hide. Metal attachments; one leather handle. 2x 90mm long metal straps- 15mm depth. Top opening. Bag folds in to middle . Central lock part broken & handle. Latch to fasten each end of metal trimming - broken. Fabric lining inside with cardboard backing - beige colour/ fair condition.No maker

Highly decorative silver-coated object in the shape of a four-pronged fork. A sailing ship forms the top of the handle. The handle (or stem) has 2 curlices on each side. The main section depicts a homely interior in which a seated woman plays the harp, a man stands listening and a child sits on the potty. The whole is surrounded by raised vine-like patterning. A very tiny triangle is engraved in the point of the fork at the back.

Slawa built the umbrella using existing and modified umbrella parts purchased from manufacturers and other sources with the idea to develop a more practical umbrella. At the time Slawa was a student studying sculpture at the Akademie der Bildenden Kunste Wien (Academy of Visual Arts). She spent many months developing the prototypes in secret before she applied for and received a patent on 19 September 1929. The patent documentation for Flirt noted that although foldable umbrellas with telescopic shafts were not new, the inventor's umbrella was a significant improvement as it was smaller and more practical as the folding mechanism had been considerably simplified. The umbrella was included in the Inventors’ pavilion at the Vienna Spring Fair in 1931. In a contemporary newspaper report it was described as ‘the magic umbrella of the sculptress’. After the design was granted a patent, it was contracted to the firm Basch and Braun, which authorized its manufacture under licence by the largest Austrian umbrella manufacturer in Austria Bruder Wuster and a German firm Kortenbrach und Rauh. It was called Flirt. In the first year of production sales reached 10,000. This number increased steadily each year as sales spread throughout Europe and the Flirt umbrella was still being produced in the post-war period. Slawa was paid royalties till 1938, the year that she left Vienna and fled to Switzerland. In 1939 with pressure from the Nazis she sold her rights to the company Bruder Wuster. Ann Carew 2016The umbrella prototypes have national and international aesthetic significance as examples of technological innovation in industrial design. The archive has national and international scientific and research potential – detailed records concerning the development of the design, patent and its manufacture are held in the studio. The archive demonstrates the links between the realms of fine art, industrial design and manufacturing in Vienna in the early twentieth century. The sale of Slawa Horowitz-Duldig’s rights to the umbrella under duress from the Nazis makes this archive historically significant. The provenance is excellent, and the prototypes and accompanying documentation have national and international interpretative potential. Ann Carew 2016Three handmade compact foldable umbrella prototypes. The prototypes have black silk covers, a metal shaft, handle, ribs and ferrule. The shaft has a telescopic mechanism. The top and the end of the handle are metal disks. The related documents, designs, patent documentation, a hand written record of her inspiration for the design, and other archival material are also held in the Studio’s Collection.

A City Sale and Exchange 'Exchange' tennis racquet with oval head, solid convex throat and fishtail handle. Model name imprinted across crown on obverse. Retailer name inscribed across throat on obverse. Owner name engraved across throat on reverse. Two deep furrows on handle. Materials: Wood, Lacquer, Metal, Glue, Gut, Inktennis

A Dayton tennis racquet, with a steel head, and small, open throat, and, wooden shaft and deep-grooved handle. Racquet strings made from piano wire. Decal inscription on obverse: NEW/DAYTON/RACQUETS. Handle and shaft are patyially wrapped in cloth tape. Materials: Wood, Metal, Glue, Lacquer, Leather, String, Ink, Paint, Cloth tapetennis

A wooden racquet with a solid, convex throat and grooved handle. Decal logo on throat on obverse comprises of a winged ball, with inscription: VICTOR/.../SPORTING GOODS CO. Decal inscription across throat on reverse: CLUB. Illegible, hand carved monogram across right side of handle. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Leather, Inktennis

An oval racquet with an elongated head, red whipping, glazed, parchment-reinforced shoulders, and a deep-grooved handle grip. Inscription across throat on obverse: DOHERTY/SLAZENGERS/PATENT/STRINGING. Inscription along right side of handle: PATENTED/OCT. 12. 1915/SLAZENGERS' NEW YORK. Materials: Wood, Gut, Metal, Glue, Lacquer, String, Ink, Parchmenttennis

A concave, wooden racquet, with white-painted cloth taped shoulders, with red and green whipping, diagonal stringing, and a fish-tail handle. On throat on obverse is the Slazenger trademark of a hexagram, with an 'S' in the centre. Barely legible inscription stamped along right side of handle: SL[AZENGER] LTD. Materials: Wood, Gut, String, Cloth tape, Metal, Glue, Lacquertennis

A Tryon Eclipse tennis racquet with a concave throat, red string whipping around shoulders, and fine-grooved handle. Model name ECLIPSE features along throat on obverse. TRYON/PHILA. trademark features on throat on reverse. Initials R.R. carved into lower handle on obverse. Materials: Wood, Gut, Ink, Leather, Cloth, Glue, Lacquer, Metal, Stringtennis

A PK-15 tennis racquet with open throat and handle wrapped with leather. Vinyl strings & plastic butt cap. Handle wrapped in plastic packaging wrap. Adhesive label on wrap marked with: 'L.RANGE PK-15...80C/20F'. Reinforcement strip along crown. Materials: Graphite, Leather, Vinyl, Ink, Adhesive tape, Adhesive label, Plastictennis