This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal clavicle scissors. Long armed scissors with short blades and a curved point. Inner aspect of each arm (near the join) is engraved with two numbers, but the only clearly legible number is a '2' on one of the arms. One arm of the scissors is engraved with the word 'Kloss'. obstetrics

This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal speculum. 'U' shaped metal instrument. Consists of a thin, curved metal body, dipping at the middle and curving towards the edges. One leg of the speculum is longer than the other. One side of the speculum is engraved with the text 'M. KLOSS'.'M.KLOSS'obstetrics

This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal speculum. 'U' shaped metal instrument. Consists of a thin, curved metal body, dipping at the middle and curving towards the edges. One leg of the speculum is longer than the other. One side of the speculum is engraved with the text 'RAMSAY'.RAMSAY'obstetrics

Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal ovum forceps. Instrument resembles a set of scissors, with a ratchet adjacent to the handle to lock them at particular apertures. The end of each arm of the scissors ends with a metal loop, with grooves on the inner aspects of the loops for grip. The inner aspect of the forceps are engraved with the number '99'. The forceps are also engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.obstetrics

These items were part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Two small metal towel clips. The clips resemble small sets of scissors, with a ratchet adjacent to the handle to lock them at particular apertures. The end of each arm of the scissors bends upwards 90 degrees, then towards the centre of the clip at another 90 degree angle. Each arms tapers to a sharp point, with the ends of the points facing and adjacent to each other. Both clips are engraved with the word 'Kloss'. Inner aspect of each clip is engraved with the word 'GERMANY'.'Kloss' 'GERMANY'obstetrics

This instrument was part of a collection of instruments associated with Dr Michael Kloss and his medical practice. Dr Kloss subsequently donated this collection to the College.Metal perforator. Instrument consists of two straight, pointed blades with screw joint, and a spring loaded insert. Also includes a connecting spring bar at top of handle. Perforator is engraved with the word 'Kloss'. Inner aspect of perforator is engraved with a three digit number , '21...'. The third number is illegible.'Kloss'obstetrics

This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal sponge holder. Instrument resembles a long pair of scissors, with thin arms and a ratchet adjacent to the handles to lock instrument into place. Each arm ends in a hollow, circular loop.obstetrics

This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal sponge holder. Instrument resembles a long pair of scissors, with thin arms and a ratchet adjacent to the handles to lock instrument into place. Each arm ends in a hollow, circular loop.obstetrics

This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal curette. Instrument consists of a metal shaft with a slightly curved, teardrop shaped scraping loop at the distal end. The handle at the proximal end is in the shape of an elongated teardrop, hollowed out at centre. The word 'Kloss' and the number '3' are engraved on the instrument.'Kloss' '3'obstetrics

The '3' on this instrument indicated it was size 3. Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal scraper. Instrument consists of a large, six sided handle section, a short, thin shaft and a small, oval shaped scoop at the end of the shaft. The handle at the proximal end is in the shape of an elongated teardrop, hollowed out at centre. The number '3' is engraved on the shaft of the instrument. The shaft is also engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.'3'obstetrics

The '3' on this instrument indicated it was size 3. Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal scraper. Instrument consists of a large, six sided handle section, a short, thin shaft and a small, round scoop at the end of the shaft. The handle at the proximal end is in the shape of an elongated teardrop, hollowed out at centre. The number '3' is engraved on the shaft of the instrument. The shaft is also engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.'3'obstetrics

Jetter and Scheerer were a surgical instrument maker founded in Germany in 1867. Their company symbol is that of a serpent curled around a rod, surmounted by a coronet/crown. This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal surgical scissors. Consists of two arms with handle grips, a narrow shaft, and small cutting blades at the end of each arm. The inner aspect of the scissors is engraved with the number '47'. The shaft is engraved with a derivation of the Rod of Asclepius, featuring a serpent wrapped around a rod, with the entire design topped by a crown.'47'obstetrics

Boxed stainless steel spring loaded device with hinged arm; 2 needles; 3 cork attachments."GERMANY" on device. Box lid; "MC36-755-12", "EAR PIERCING SET" ear piercing instrument, piercing,

1 pair stainless steel forceps with round serrated jaws, screw joint 6¼" (16cm) "Jetter & Scheerer Germany"oral & tonsil instrument, dental sugical instrument

1 pair stainless steel forceps with triangle serrated jaws, screw joint 18cm. "MADE IN ENG" "STAINLESS STEEL"oral & tonsil instrument, dental surgical instrument

1 pair stainless steel forceps with triangle serrated jaws,screw joint 7½" (19cm) "V.H.A GERMANY" "29" "STAINLESS"oral & tonsil instrument, dental sugical instrument

1 stainless steel needle holders with round spring handles and a lock at the end."SKIDMORE ENGLAND STAINLESS STEEL"needle holders, surgical instrument

Dental surgical instrumentStainless steel instrument with self-adjustable "STAINLESS" "RAMSAY"mouth gag, gag guard, dental sugical instrument

Used for surgery in a mental health hospital in Victoria circa 1920. Positions the tongue of an unconscious patient forward; possibly used during tonsillectomies. May also have been used for patients with epilepsy. http://museumvictoria.com.au/collections/items/259059/carmalt-s-tongue-holding-forceps-medicon-metal-circa-1920Stainless steel forcep with punch arm and base with matching hole"STAINLESS STEEL", "F.G & D" "C.TURTIN & SONS. SHEFIELD"oral & tonsil instrument, mental health, epilepsy

1 lined Case:1 handle; 1 May ophthalmoscope; 4 Dental mirrors; 1 tongue depressor; 3 different sized headsCase marked: "Klinostik / Super Diagnostic / BRITISH MADE" Handle; "KLINOSTIK REGSD"klinistik, opthalmic instrument, diagnostic set

Commonly used during epidemics of Diptheria.1 metal case containing: 12 tracheostomy tubes various sizes.Case: "Curved Adapters" "Casualty". "MADE IN ENGLAND", "STAINLESS" "PART REF. 370699"tracheostomy tubes, paediatric, surgical instrument

Metal adjustable, retractor anaesthetic instrument with sliding ring 8" (20cm)"202" "STAINLESS STEEL"gag, mouth gag

1 Case with zipper: 1 Battery holder; 2 globes; 4 plastic ends; 1 May ophthalmoscope head: 1 metal viewer attachment.Case: "HEINE", "GERMANY" Instrument: "ANAX", "GERMANY" Head: "HEINE", "Miroflex", "Anax" "C-00. 13. 102"

Stainless steel scissor like instrument with self adjusting lock. Teethed end."SKIDMORE & CO" "STAINLESS STEEL" "MADE IN ENGLAND"hemostat forceps, arterial forceps

Olive coloured canvas zip top bag with shoulder strap. Containing surgical instrument kit used for minor surgery at site or on helicopter.Bruce C Starkey 1736666medical bag

The De Ford Inhaler was introduced in 1913 and was designed to allow anaesthesia to continue through the nose while dental surgery was happening.This inhaler is composed of metal and rubber. The oral mask and rubber covered nasal mask are connected to a curved rubber covered support that was placed on the patient's forehead to hold the inhaler in place. The gas was administered via a long tube; the terminus designed to allow for the placement of a vial containing the anaesthetic drug and a rebreather bag mount. Inscribed on the back of the mouth inhaler: 'Dr De Ford's Universal Inhaler for Somniform Nitrous Oxide etc. E. De Trey & Sons Phila. PA U.S. Pat. Pending.'anesthesia, dentistry, somniform, surgery, medical instrument, de ford, 1913, e de trey and sons, vial, rebreathr bag mount, inhaler

Patient controlled analgesia, or PCA, was developed in the 1960s. This mode of opioid administration allows patients to directly respond to their individual levels of pain. It is estimated there are now somewhere between six and 15 million uses annually.Two parallel sections enclosed in cream coloured metal casing and joined in the centre via a brown metal section that also forms the base and stand. The left side has a dark brown perspex cover with a small brushed metal latch and handle. The right has a grey metal panel with dial, knobs and a rolled paper dispenser. A clear plastic intravenous bag is attached to the device by a clear plastic tube.There is also a black plastic coated wire attached to a handle with a red button on top. This is used for the patient to administer the analgesia. analgesia, intravenous, flinders medical centre, janssen scientific instruments, patient controlled

The Bruck Inhaler is a modification of the Clover Inhaler, designed by Lambert Bruck. Bruck added a glass dome which enabled the level of ether to be monitored during administration. This was a revolutionary change as it removed guess work from the process.The Bruck Inhaler is a historically, aesthetically and scientifically significant piece. The basic design is based on the Clover Inhaler, but with a rounded bottom. The idea of a glass viewing window was possibly inspired by Wilson-Smith Inhaler. The Bruck Inhaler is historically significant as it is the first inhaler to be made with a completely clear lower glass section. This improved the usability for the ether administrator, and eliminated much of the guesswork associated with dosage and ether levels, which in turn improved the patient experience. This piece provides a strong local link to both anaesthetic and general medical practice at the turn of the century. The design is credited to Ludwig Bruck of Sydney, and was presumably manufactured in the same area. Bruck, as the attributed designer, holds much relevance to the significance of the object, as connected with him is much historical information about the social context of medical practice. Ludwig Bruck was a prominent figure in the medical industry. He started his medical career in Sydney as a Medical Transfer Agent, and later owned a shop at 16 Castlereagh Street, Sydney. This business is listed in the 1903 Register of Firms as a Medical Agent and Importer of Medical Instruments and Books. Bruck was vocal as a journalist and published analyses of medical statistics, as well as the well known Australasian Medical Dictionary and Handbook, which included the “List of Unregistered Medical Practitioners”. Ludwig Bruck was an immigrant. He was of German descent, which placed him in a precarious position within Sydney society during the turn of century. Bruck conducted several public conversations with prominent members of the Australian Natives Association through the Sunday News in regards to his disagreement of the employment of medical practitioners by the ANA specifically to corroborate their health insurance policies. He was also a stalwart supporter of the Australian arm of the British Medical Association, being the publisher of the first and subsequent editions of The Australian Medical Gazette. Bruck chose to end his life with a combination of poison and chloroform on 14 August 1915, after being accused of trading with the enemy during World War One. His suicide note stated his horror at leaving his business partner to deal with the tarring of his reputation as the reason for his decision. The Bruck Inhaler has aesthetic significance as it is a beautiful example of turn of the century surgical design and craftsmanship. Aseptic methods of surgery were well known by 1909, and the aesthetic design of the Bruck Inhaler conformed to these principles. The ability for the surgeon to unscrew, clean and sterilize each part of the Inhaler contributes to the streamlined design of the piece. The Buck Inhaler holds scientific significance. There is the capacity for further research to be undertaken on the object. Geoffrey Kaye often collected multiple examples of equipment, usually one for reverse engineering and another for teaching. There are currently two examples of the Bruck Inhaler in the collection, presenting an opportunity for further technical research on the object. The inhaler is oval shaped with one half made of glass to allow observation of the ether level. A vertical cross tube, 22mm in diameter passes between the face-piece and the bag [missing]. There is a stopcock for admission of oxygen or nitrous oxide opposite the bag attachment. There is a central tube, 28mm in diameter, with controllable ports on either side. There is also a tear-drop shaped fask mask.Hand engraved on side of base: L. Bruck / Sydneyclover, joseph, bruck, lambert, inhaler, rebreather, nitrous oxide, oxygen, williams, probyn

The design of this item is associated to what was "first described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. The manufacturer of this blade is the Boots UK Limited pharmacy company, they apparently had a branch in Australia to distribute their medical and pharmaceutical equipment and part of them was focused on the manufacturing of laryngoscopes blades. The Boots company reproduced this trending design used in the anaesthetic practice. URL Reference: https://en.wikipedia.org/wiki/Boots_UK / https://en.wikipedia.org/wiki/Alliance_Boots Macintosh semi curved blade designed in a baby size, without light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and brand and the place where it was made at the back of the blade base.Stamped at the blade back base area, BOOTS AUSTRALIA / MADE IN ENGLANDmacintosh, blade, boots australia, boots uk limited, england blade

Scarifiers were traditionally used for blood letting, and in folk medicine for the practice of cupping. Spring loaded knives cut the skin, then a warmed metal or glass cup is placed over the cuts. As the air inside the cup cools, it creates a vacuum drawing out the "bad" blood. The process is also related to the ancient medical theory of "humors". This theory dates back to the Hippocratic tradition and persisted through to the mid-19th Century. According to this theory, the body had four "humors", "airs" or "elements" which neeed to be kept in balance. Any imbalance could cause illness and this was often explained in terms of excess fluids. One prescribed treatment was to remove the excess blood which would restore the balance.Square, solid brass object with lever to release blades underneath.Etched on side: Mundy / Londonmetal, blades, bloodletting