Showing 1244 items matching "pump"
-
Kiewa Valley Historical Society
Irrigator Pump - Medical
This medical / hospital equipment was used in the Tawonga District General Hospital which was built in the 1950's specifically for the increase in population due to the Kiewa Hydro Scheme.Clear glass Irrigator with pump on top missing. The pump is squeezed. The irrigator is pointed at one end gradually widening to a cylinder then blown out to a sphere before coming back in to a neck (with a lip) where the pump part would be attached.medical, medical irrigator, hospital -
Bendigo Historical Society Inc.
Photograph - Nell Gwynne Mine Site, 1935
Significant to mining history of Bendigo.Black and white photograph of Nell Gwynne shaft showing the installation of a temporary pump at No. 3 level on 17.9.1935. Pump is supported by a metal framing.Written in pencil on back of photograph in pencil:' Erecting Nell Gwynne Sinking Winch 16/2/35'nell gwynne gold mine, shaft -
Lakes Entrance Historical Society
Photograph, Vera Bennett, Lady Harriet barge Lakes Entrance Victoria, 1992
Colour photograph of Lady Harriet barge moored at Bullock Island Jemmys Point in background, Also second photograph taken at different angle Pumping out stone barge 1992boats and boating, barges -
Whitehorse Historical Society Inc.
Functional object - Toy Petrol Pumps
White painted set of BP Pumps on stand.Accessory Pack No 1/Made in England/By Lesneytoys, general -
Bendigo Historical Society Inc.
Photograph - CASTLEMAINE GAS COMPANY COLLECTION: PHOTO GAS METER
Gas meter/pump - Location and Date UnknownPolaroidorganisation, industry, gas and fuel -
Queenscliffe Maritime Museum
Functional object - Vortex Pump
For over 45 years, Richard has used Wendy regularly for recreational fishing and occasional sailing out of Queenscliff. He has the original cotton canvas sails that were fitted on the boat when she was built, and which still are in working condition. Richard says that one of his favourite pastimes has been trolling for pike around Swan Island, close by Queenscliff, ensuring that the heritage of this Lacco-built boat fishing boat is preserved. In about 2015, Wendy underwent a rebuild including: a new centre-case, ribs and deck, and a new Yanmar engine. The works were done by Bryon Miller of Peninsula Wooden Boats. Wendy remains berthed, fore and aft, at Number 12 pile in front of Queenscliff Lonsdale Yacht Club. Well known couta boat in QueenscliffeAustralian made Kopsen vortex bilge pump.Kopsen Vortexcouta boats, 'wendy", bilge pump -
University of Melbourne, School of Chemistry
Vacuum Pump
Hand Vacuum Pump - originally from Physiology -
Department of Energy, Environment and Climate Action
Lamp for Coventry Climax pump trailer
Lamp fitted to Coventry Climax pump trialerforests commission victoria (fcv), fire pump, bushfire -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Breast reliever associated with midwife Mary Howlett, c. 1866 - 1920
Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920. She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster who donated them to the museum collection in 1993. Glass breast pump with cork stopper and wooden bung. Pump shape loosely resembles that of a light bulb, with a bell-shaped nipple shield on one side. breast feeding, midwifery -
Bendigo Historical Society Inc.
Functional object - Brass air Pump
For pumping air into petrol irons, the maker is probably Coleman. Liquid fuel irons were a great advancement from Sad Irons in the late 1800's and were used before electricity was availableBrass air pump with wooden handle. A brass tube two centimetres diameter and 14 ccentimetres long with a half centimetre diameter. A 14 centimetre long metal rod with a two and a half centimetre diameter and a three and a half centimetre long wooden handle which slides in and out of the tube. Presumably there is a fitting inside the tube on the end of the rod to push air out of the hole on the other end of the tube.K15.3coleman iron, brass air pump -
Warrnambool and District Historical Society Inc.
Document - Illustrative document of Alderdice Brassfounders Company Products, c.1950
This item advertises and describes a power pumping head and other products made by Alderdice Brassfounders of Warrnambool. Brothers William and Charles Downing came from Melbourne to Warrnambool in 1898 and established the Atlas Brassworks. In 1901, with the involvement of John Alderdice, the Downing brothers began the Alderdice Brassfounders Company situated at 64 Henna Street in Warrnambool, the site of an old cordial factory. This business which produces fittings used in farming, factories, public utilities, Government departments etc., still operates at the same address.This item is of considerable interest as an early example of the the business activities of Alderdice Brassfounders Co., a prominent business in Warrnambool for over 120 years.This is a sheet of paper describing a power pumping head one side and other products of the Alderdice Brassfounders Company on the other. It contains black printing and black and white illustrations on both sides of the paper. Three of the illustrated items have been crossed out.warrnambool industries -
Kew Historical Society Inc
Photograph - Construction of the Eastern Freeway (F19), Ron Setford, March 1972
Ron Setford and his wife Grace Setford lived in Tanner Avenue, East Kew, from c.1946 to c.1995. A keen photographer, he recorded the changing face of Kew over a 20 year period. Apart from 30 photographs of built structures and places in Kew dating from 1960 and 1961, 145 of his 35mm colour slides chronicle the development of the F19 (later renamed Eastern) Freeway through the Yarra Valley in Kew over a five year period from c.1972 to c.1977. This important collection was donated to the Society by his granddaughter in 2025.This collection of 175 35mm slides is of local and statewide significance, owing to its subject matter, particularly the major development of road transport infrastructure during the 1970s with the construction of the Eastern Freeway. The photographer also took care to annotate and date most of his slides which enable the researcher to pinpoint temporal and spatial locations.Photograph of works involved in construction of the F19 (now Eastern) Freeway. The photo shows how construction sometimes took account of key environmental features; in this case the Kew Billabong."Eastern Freeway / pumping out of old river"ron setford, eastern freeway, f19 freeway -
Phillip Island and District Historical Society Inc.
Photograph, 1923
One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPhotograph of the unveiled Rhyll Cairn with pump and well in foreground.local history, photography, rhyll cairn, black & white photograph, john jenner, bryant west -
Coal Creek Community Park & Museum
Water Pump
Handle for Pumping Snout for water to come out fromBAPP DOUBLEACTION -
Bendigo Historical Society Inc.
Slide - DAVID MCDONALD COLLECTION: EPPALOCK. CONSTRUCTION, c1964
Eppalock. Construction. Some of the pipes in the pump room at Eppalock.agfacolorcivil engineering, water supply, eppalock, eppalock. construction. some of the pipes in the pump room at eppalock. -
Bendigo Historical Society Inc.
Slide - BENDIGO & DISTRICT P.O.I
Slide. Bendigo & District P.O.I. Pumping Station at Eppalock.slide, bendigo, bendigo & district p.o.i., bendigo & district p.o.i. -
Bendigo Historical Society Inc.
Slide - BENDIGO & DISTRICT P.O.I
Slide. Bendigo & District P.O.I. Pumping Station at Eppalock.slide, bendigo, bendigo & district p.o.i., bendigo & district p.o.i. -
Bendigo Historical Society Inc.
Slide - BENDIGO & DISTRICT P.O.I
Slide. Bendigo & District P.O.I. Pumping Station at Eppalock.slide, bendigo, bendigo & district p.o.i., bendigo & district p.o.i. -
Clunes Museum
Domestic object - FLY SPRAYER, SHELL, UNKNOWN
PUMP ACTION METAL FLY SPRAYER "SHELLTOX" BRANDlocal history, domestic items, pest control, domestic items, pest control -
Whitehorse Historical Society Inc.
Document, By-Law No 6. Shire of Blackburn and Mitcham, 1930
Shire of Blackburn and Mitcham By-law No 6 (petrol pumps)Shire of Blackburn and Mitcham By-law No 6 (petrol pumps)Shire of Blackburn and Mitcham By-law No 6 (petrol pumps)local government, shire of blackburn and mitcham, by-laws, petrol pumps -
Ambulance Victoria Museum
GMS vacuum super splints, air activated splints
rad canvas bag containing air splints and pump -
Department of Energy, Environment and Climate Action
Rega Burner
Used for planned burning operationsPressurised Rega burner wand, with pump and pressure gaugeOlindaforests commission victoria (fcv), planned burning, bushfire, hand tools -
Port Melbourne Historical & Preservation Society
Letter - Letter regarding Pumping Station, Esplanade West, Port Melbourne. 1946, 22 Mar 1946
1946 Letter regarding the Pumping Station in Esplanade West.mmbw, engineering - melbourne metropolitan board of works, pumping station -
Port Melbourne Historical & Preservation Society
Letter - Letter regarding Pumping Station, Esplanade West, Port Melbourne. 1887, 1887
1887 Letter regarding the Pumping Station in Esplanade West.mmbw, engineering - melbourne metropolitan board of works, pumping station -
Maldon Vintage Machinery Museum Inc
Pump - Vertical Turbine
Two stage vertical turbine pump attached to a short discharge column and mounted in a frame with a gearbox at the top. The gearbox is cut away to reveal the interior. The pump is of Giles & Gascon design as sold by Kelly & Lewis. The pump and gearbox are set up to display the unit for sales and marketing purposes."K & L GG in relief back and front of gearbox housing.machinery; pump; vertical turbine; metalwork -
Maldon Vintage Machinery Museum Inc
Pump Casing, Estimated 1990's
Casing casting for horizontal split casing pump. Possibly for Thompson Kelly & Lewis double suction "Super Titan" pump. Painted blue and bolted to two pieces of wood.machinery, pumps -
Flagstaff Hill Maritime Museum and Village
Equipment - Bilge Pump Barrel, Alexander Hall and Son, 1855
This bilge pump barrel is part of the ship's bilge pump machinery. Bilge or water can find its way into the hull of a ship and if it is not removed the ship will eventually sink. The bilge pump is designed to efficiently remove the bilge water. The Schomberg was a large three-masted full-ship rigged wooden ship built in 1855 by Alexander Hall and Co in Aberdeen, Scotland for James Baines' famous Black Ball Line at £43,103. The vessel was 288 feet (88 meters) in length, with a beam of 45 feet (14 meters), a depth of 29.5 feet (8.99 meters) of 2,284 tons. The mainmast was 210 feet (64 meters) high and she carried 3.3 acres of sail. The vessel was constructed with three skins. One planked fore and aft, and two diagonally planked, fastened together with screw-threaded trunnels (wooden rails). The Schomberg is one of only three clipper wrecks in Victorian waters that operated the England to Australia run. While the other two, Empress of the Sea and Lightning, were built by the famous American shipbuilder, Donald Mac Kay. Schomberg was an attempt to build a faster ship than Mac Kay and a vessel fast enough to break the sailing record to Australia. The Schomberg sailed on her maiden voyage from Liverpool on 6 October 1855, under the command of Captain James Forbes, on its maiden voyage to Australia with general cargo, jewellery, spirits, machinery, and 2,000 tons of iron rails and equipment intended to build the Melbourne to Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. She also carried a cow for fresh milk, pens for fowls and pigs, plus 90,000 gallons of water for washing and drinking. She also carried 17,000 letters and 31,800 newspapers. There were approximately 473 passengers and a crew of 105. It was hoped that Schomberg would make Melbourne in sixty days, setting a record for the voyage, but light winds at the equator dashed those expectations. The ship sighted Moonlight Head in southwest Victoria on Christmas Day but through a deadly combination of wind, currents and unmarked sand spits, the vessel gently ran aground on 26 December 1855 on a spit that juts into Newfield Bay, just east of Curdies Inlet, and the present town of Peterborough. Fortunately, the SS Queen was nearby and managed to save all passengers and crew. The steamers Keera and Maitland were dispatched to salvage the passenger's baggage and the more valuable cargo. Other salvage attempts were made, but deteriorating weather made the work impossible, and within two weeks the Schomberg's hull was broken up and the vessel abandoned. The wrecking of the Schomberg caused quite a public stir, particularly in light of the fact the vessel was supposed to be, the most perfect clipper ship ever built. Captain Forbes was charged in the Supreme Court under suspicion that he was playing cards with two female passengers below decks when his ship ran aground. Despite a protest meeting, two inquiries and the court proceedings, he was found not guilty and cleared of all charges. In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery at the Flagstaff Hill Maritime museum that also displays ship fittings and equipment, and personal effects. The Schomberg has historical significance as one of the first luxurious ships built to bring emigrants to Australia to cash in on the gold rush era. And is included on the Victorian Heritage Register (VHR S612). The collection of Schomberg artefacts held at Flagstaff Hill Museum is primarily significant because of the relationship between these recovered items having a high potential to interpret the story of the Schomberg and its foundering during a storm. The shipwreck is of additional historically significance for representing aspects of Victoria’s shipping history and for its association with the first passenger ship, which was designed not only to be the fastest and most luxurious of its day but foundered on its maiden voyage to Australia.Bilge pump barrel,; brass cylinder with screw thread at the base and fittings on one side. A piece of the ship's timber is attached. The object was recovered from the wreck of the shipo Schomberg. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, bilge pump, ship's plumbing, bilge pump barrel, bilge -
Maldon Vintage Machinery Museum Inc
Pump - Centrifugal
Painted light green with moving parts and bolts picked out in black. End suction, overshot discharge Bolted to a wooden base. V belt driven.Brass specification on sides - "Suction pump manufactured for Victorian Railways in 1930. Model H" Elaborate monogram in black on side denoting Kelly & Lewis Pumps. Brass plate with Kelly & Lewis Ltd / Centrifugal Pump / Type W.machinery pumps centrifugal metal -
Orbost & District Historical Society
soda syphon, first half 20th century
Dross Drossou established a cordial factory in Orbost in the 1930s. He sold his cordial manufacturing business to Phillips and Stone, a Bairnsdale company, in 1948. Glass bottles were refillable until the 1960s, creating a demand for their collection and onsale back to beverage manufacturers via ‘bottle merchants’. A deposit on the bottles was added to all sales as they left the factory. The returned bottles were washed and the old label removed. The inside was cleaned by pushing the bottle onto a revolving brush. The reusing of the bottles went on until the bottle was broken or the top became chipped. Phillips & Stone operated in Orbost and Bairnsdale. This bottle is an example of a product manufacture by a local industry no longer existingA clear glass soda syphon bottle with a red pump on the top."Soda Water Phillips & Stone Bairnsdale P S ORBOST (trademark) 30 Fl OZ"phillips&stone syphon bottle -
Whitehorse Historical Society Inc.
Functional object - Breast reliever
Glass cup with rubber pump attached; used for expressing milkIngram's Breast Relievermedicine, nursing