The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. A pair of wide shaped and heeled women’s leather slingback shoes designed by Moya in shades of brown, red and ochre.women's shoes, moya -- shoes, footwear

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of brown leather court shoes with deep tan leather uppers, designed by Yves Saint Laurent, Paris.YVES SAINT LAURENT / Pariswomen's shoes, yves saint laurent, footwear, court shoes

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s.Pair of two tone beige and brown leather women’s court shoes designed by Pedro Garcia, EspanaPedro Garcia / ESPANA / Pedro Garcia / Made in Spainwomen's shoes, pedro garcia -- espana -- shoes, footwear

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of two-tone mid and dark brown leather court shoes with the designer name ‘JW Jane’ on the upper.Label upper: "JW JANE"women's shoes, jane jw -- shoes, footwear

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s.A pair of two-tone cream leather and beige suede women’s court shoes with beige leather insoles by Paragon Shoes.Paragon / 49274 / 7 1/2women's shoes, court shoes, paragon shoes, footwear, shoes

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. A pair of open-toed women’s sandals by 'Vince', styled in bands of red, white and blue.VINCEwomen's shoes, footwear, sandals, vince -- shoes

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s.Pair of leather women’s court shoes, manufactured by Mario Valentino of Italy. The yellow leather shoes have a cream leather insole and decorative white leather bows with black polka dots.Label: "MARIO VALENTINO / MADE IN ITALY"international fashion, women's shoes, court shoes, mario valentino

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s.A pair of slingback shoes by Jane, styled in red leather."JANE"women's shoes, jane -- shoes -- designer, footwear

The extensive fashion and design collection of the Kew Historical Society has been assembled over a number of decades. One subsection of this collection is shoes, designed and manufactured for Australian women by Australian and European designers. Many of the shoes, while often mass-produced, were generally constructed by skilled artisans using traditional shoe-making techniques. The shoes date from the 1890s to the 1980s. Pair of lime yellow leather women’s court shoes. A label on the upper states that the shoes are part of the Magnini Elegance Collection or style.Magnini Elegance Leather Upper / Synthetic lining / Leather sole / Made in Malaysiawomen's shoes, magnini, elegance collection, footwear

A moulding plane is a specialised plane used for making complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmaker's shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. This item may be a one off item made by a cabinet maker for a particular project as the plane is not marked resulting in no history or manufacturing provenance available.A vintage tool made by an unknown maker, this item was made commercially and by individual cabinet makers for particular furniture projects that could produce an ornamental finish to timber. The tool was used before routers and spindle moulders came into regular use after World War l l, a time when to produce a decorative moulding for a piece of furniture, door trims, etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant early tool that today is quite rare and sought by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Plane, wooden, narrow blade. Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, wooden plane, wood working tool, boat building tool, tool, woodwork tool, plane

Known for its distinctive ‘boo-book’ sound which gives it its name, the Southern Boobook owl inhabits a variety of environments, including woodland, rural, open desert and dense forest. It is found on mainland Australia as well as Tasmania and other costal islands. Some similar species can be located in New Zealand, New Guinea and Indonesia. Young Boobooks’ plumage is mostly off white, and there are slight variations in subspecies based on location - the Cape York rainforest owls are a larger, darker brown bird while the Tasmanian Boobooks are smaller and often have more white flecks on their plumage. Southern Boobooks hunt and eat nocturnally and, like most owls, their diet consists of smaller animals including smaller mammals and insects. While elements of this particular specimen are representative of the actual bird, the form and structuring of this specimen’s neck area appears to be somewhat out of shape in comparison to images of the actual bird, which present a distinct head structure. The eyes on this specimen are also problematic, as they are solely black - not aligning with accurate representations of this species that have a distinct golden yellow outer ring in their eyes around a large black pupil. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.One of the most commonly found Australian species of owl, the Southern Boobook, or Mopoke as it is also known, is also Australia’s smallest owl. With a coating of dark chocolate brown coloured plumage on its wings, dorsal area, continuing onto the top of the head and around its eyes, the owl’s breast plumage is flecked with hazelnut brown and white feathers. Its chin and nose areas are a soft creamy white, and the owl’s beak is a darker grey. Traditionally, the eyes are yellow as are the legs and taloned feet. This particular specimen stands upon a wooden perch and an identifying tag hangs from its right leg.Swing-tag appears to read: '39. Boobook Owl / Catalogue page 53.' The 2 digit number at the beginning of the label could also be '3a'. taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, southern boobook, mopoke, australia, boobook, nocturnal, ninox novaeseelandiae, owl

Newspaper advertisement: Diamond Valley Leader, 2 April 2008, Midway Arcade complex. Newspaper advertisement: Weekly Review, 6-12 June 2018, Miles real estate, 6/976 Main Road Eltham. Newspaper advertising feature: The Age, 22 December 2020, Traditional Italian goodness to cool off in summer, When gelato 'gluttony' comes in 36 flavours.main road, eltham, property, houses, shops, businesses, midway arcade eltham, eltham optical, miles real estate, augustus gelatery, paul vernuccio, joe molinaro

This calculator is like a modern calculator style keypad with a traditional pinwheel calculator. In operation it is similar to other Facit machines. The design from the 1930s was produced without interruption with only slight modifications until the early 1970s.This one hasn't a serial number or Model Number so date is unknown but probably the 1940s - 1950s when the SEC were constructing the Kiewa Hydro Electric Scheme.Used by the SEC Office Staff when the SECV were constructing the Kiewa Hydro Electric SchemeBox shape with grey steel top and sides on a black base. Three thin strips of stainless steel embossed with numbers on the top and clear panels beside them. Front has 3 red and 10 black knobs with arrows on the red and numbers on the black. Sides have stainless steel pedals and winders. The machine is very heavy. See on-line "mechanical calculators.wordpress.com"'Facit' on the front.calculator, facit

Mulga, is an Acacia shrub or small tree native to arid outback areas of Australia. It is light, easy to carve and has strength and durability It is commonly used for turned objects or small decorative items. The wood is dark brown with yellow bands and polishes well. Traditional uses included spears, clubs and boomerangs. George Reed was a draftsman who lived in Bentleigh , City of Moorabbin in mid 20th CGeorge Reed was a draftsman who lived in Bentleigh , City of Moorabbin in mid 20th C and used this Mulga wood bowl in his officeA souvenir Mulga wood bowl with metal aeroplane on the lidearly settlers, market gardeners, wood carvers, souvenirs, mulga wood, acacia trees, boomerangs, vases, post world war 2 estates, bentleigh, mckinnon, highett, cheltenham,south australia, victoria,reed george, reed gladys, clark judy,

Premiership cap presented to Hercules "Hec" Vollugi after Essendon won the 1901 premiership. Premiership caps were presented by both the VFA and the VFL until about 1924. The caps were traditionally made of navy silk. This one has had Essendon's colours embroidered on the peak in the shape of a shield. Vollugi was a fine wingman who played 70 games for Essendon from 1901 to 1906.Navy blue grosgrain silk cap with small peak; cap is divided into six segments separated by cream silk braid with navy button on top; embroidered badge in metallic and silk gold thread at front of cap; badge consists of monogram of interwined V F L with "Premiers" in a scroll beneath and "1901" beneath that; shield embroidered in red and black longstitch on peak. Cap is lined with "H. A. Vollugi 1901" handwritten in ink in centre."H. A. Vollugi 1901" is handwritten in ink on the inside of the cap

Fourteen Miniature Models of Nurses from Primitive Era to 1980's. They were Dean Nancy Long's idea and she had them made. They were used for "Careers" information when visiting High Schools. In 1972 when the uniforms changed from traditional to more modern trend they created interest for prospective trainee nurses. Each has a frame and a name tag in Roman script Collection of fourteen miniature Dolls. These dolls were used as a teaching aid at the Northern District School of Nursing.Titles of Dollsnursing uniforms, educational equipment, careers

Primarily a painter, Mandy Nicholson also produces ceramics, carvings, murals, prints, designs and children’s clothing. Born in 1975, Nicholson was raised in Healesville and belongs to the Wurundjeri-willam (Woiwurrung language) clan of the Kulin Nation. Mandy’s paintings often represent important cultural rituals and are executed in her distinct graphic style. She uses the traditional motifs of her people blended with contemporary interpretation.

For generations, Bushells Coffee has been a part of everyday Australian life. It is an iconic household brand name that generations of families have grown up enjoying. These tea and coffee tins or caddies were commonly purchased from suppliers selling the well-known products of Bushels or Robur. The empty tins would have been used for storing other foods, household or farming items.A badly damaged square, Bushells Ltd 'Barley' tea canister or tea caddy with a rusted on lid and faded mountain scenes depicted around the four sides of the tin. There is indecipherable print at the bottom of each side, however, some details can be read - No. 144 (of a series) Net 1lb. Weight and other words not clearly read. The lid has a picture of the Bushells man with a long beard. This canister is from c.1920's and is very rare. There is indecipherable print at the bottom of each side, however, some details can be read - No. 144 (of a series) Net 1lb. Weight and other words not clearly read. The lid has a picture of the Bushells man with a long beard. The pictures on each side are very worn, but are of a female tea picker in traditional clothing working on a mountainside, standing near a shed with a cow and another one of her standing near an ox driven cart. metal, tea caddies, tea accessories, containers, food containers

Tapestry is a form of weaving and is most commonly made on a loom, but traditionally, from 11th to the 19th centuries, made by hand. When used as a table cover, items such as this one were often covered and protected by a lighter weight, easily washable tablecloth. This tapestry tablecloth has a soft velvet feel. It has seen many days and has been lovingly repaired in several places with dark patches on the underside. This tapestry tablecloth represents heavy duty table coverings used to protect furniture and as a form of decoration. It is an example of what was used in the Colonial and Early Settler days in Australia.Tablecloth or table cover, rectangular tapestry in burgundy and red tones. A burgundy is around all sides with a floral inner border, framing a decorative oval centrepiece of floral design on a red background. the short sides are reinforced with tape on the underside. The cloth has been carefully repaired on the underside. There are pin marks on the tape in one corner.flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime museum and village, maritime museum, tablecloth, tapestry, table cover, table linen, manchester, vintage, arts and crafts

A Couta boat is a type of sailing boat originally designed and built in Victoria, Australia, around Sorrento, Queenscliff and along Victoria's west coast as far west as Portland. It was originally used as a traditional fishing boat from around 1870 until the 1930s, although it survived as a commercial fishing vessel until the 1950s. From the 1970s onwards a community of enthusiasts started restoring old couta boats to use recreationally.The Couta Boat has been associated with the fishermen of Queenscliff from the first quarter of the 20th Century, and still is of significance due to the popularity of this boat as a leisure sailing vessel.2 Reproduced photographs of couta boat fishing fleet under full sail in Queenscliffcouta, couta boat, sailing, fishing, port phillip, queenscliff

The Fashion & Design collection of Kew Historical Society includes examples of women’s, men’s, children’s and infants' clothing from the 18th, 19th and 20th centuries. While the collection includes some examples of international fashion, most items were handmade or purchased in Melbourne. Tenerife lace (calado canario) is one of the traditional industries of the Canary Islands off the coast of West Africa. It uses drawn work embroidery.Canary Island Tenerife lace blouse. The blouse is decorated with bands of drawn thread lace of two widths at the waist line. There are two bands of wide lace featuring two circular motifs and two simple narrow bands. The neckline is decorated with two bands of the wide lace and three bands of the narrow lace. There is a single button opening at both sides of the necklinefashion and textiles collection - kew historical society, lace, women's clothing, blouse, tenerife lace

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The subject planes blade is designed to cut a groove and it's blade maker (M Gilmour) is not listed by collectors of vintage planes as a known plane makers of the 19th or 20th century.A vintage tool made by an unknown maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce an ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve the required decorative finish. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Grooving PlaneM Gilmour stamped on bladewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, moulding plane, groove plane, joiners tools, hand plane, carpenters tools

A smoothing plane is a wood plane used for making a smooth surface to wood surfaces traditionally, these planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape or size required. The blade, or iron was likewise formed to the intended flat or level profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and smoothing planes for the full range of work to be performed. Large crown mouldings or smoothing plane surfaces required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This plane is a coffin pattern smoothing plane and is unmarked so the maker is unknown however it's design and patina indicate it was probably made in the mid to late 19th century and would be regarded as a vintage or antique item sought after today by collectors of vintage tools. A vintage tool made by an unknown maker, that was made commercially for firms and individuals who worked in wood and needed a tool that could produce a flat or level finish to timber. These types of planes came in various shapes and sizes to achieve the required finish to timber surfaces used in cabinet making. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools only. Smoothing Plane Coffin type Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. This item is unmarked so the maker is unknown, these types of decorative moulding planes of all sizes and designs are for sale around the world and these tools are well sought after by collectors of vintage tools.A vintage tool made by an un known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Moulding Plane J Heath (owner) stamped at one end (maker unknown)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath

when the Buddha died (mahä Parinibbhäna) BC 543, his body was cremated in a sandalwood pyre at Kusinagara in India and his left canine tooth was retrieved from the funeral pyre by Arahat Khema. Khema then gave it to King Brahmadatte for veneration.[1] It became a royal possession in Brahmadatte's country and was kept in the city of Dantapuri (present day Puri in Odisha). (Wikipedia) Esala Perahera (the procession of Esala) is the grand festival with elegant costumes held in July and August in Kandy, Sri Lanka. This historical procession (perahera) is held annually to pay homage to the Sacred Tooth Relic of Lord Buddha, which is housed at the Sri Dalada Maligawa in Kandy. A unique symbol of Sri Lanka, the procession consists of many traditional local dances such as fire-dances, whip-dances, Kandyan dances and various other cultural dances, in addition to the elephants who are usually adorned with lavish garments. The festival ends with the traditional diya-kepeema ritual, a water cutting ceremony which is held at the Mahaweli River at Getambe, Kandy. (Wikipedia)Black and white photographic postcard on elephant on the stairs outside the Kandy Temple, Ceylon.chatham-holmes family collection, tooth relic, elephant, kandy temple, ceylon

The subject item is a smoothing plane traditionally wood planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade use for achieving a flat and smooth finish to timber. The blade, or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and flat bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The maker Atkin and Sons were a prolific Birmingham plane maker, active from 1863 to 1900 when they became Atkin and Sons Ltd and traded until 1966. Their trademark was actually "BENEFACTUM" which is Latin for "well made."A well-made tool from the early 20th century from a well-known company that ceased trading in Birmingham in 1966, today this tool from this company is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes as well as smoothing timber projects were created by the use of hand tools. Tools that were themselves handmade shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to finish timber.Jointer or Jack Plane with fishtail handle, Size of iron 2 1/2 inches wide, Stamped GN inside W made by Akins and Sons Birmingham UKflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jointer plane, plane

This type of head dress was very commonly worn by British Commonwealth Forces in the Sub Continent and other tropical areas. This particular example would have been a common sight in Northern Australia during the time frame, as well as Africa, Middle East and the Pacific. It is a light weight ventilated helmet offering good air circulation via the vent in the top of the crown, and shade to the back of the neck. As well as protection by the peaked front for the eyes reducing glare, preventing sun and heat stroke. It also created an image of gentlemanly dress and pride in appearance. It conformed to an ideal and was considered quite fashionable and a little dashing, often worn at a jaunty angle, creating a rakish air, far from today's simplistic view of pure functionality and at as low as possible cost. Whether worn with a tropical uniform with jacket and trousers, or open necked shirt and shorts, the wearer was easily identifiable as British or one of the Commonwealth countries.WW2 RAAF Wolsley cork helmet. Helmet Khaki cotton six (6) panel outer, with three (3) fold pugaree. Colour patch on left side approximately 6cm X 5.5cm, Dark blue,2.5cm, Light blue, 0.5cm and Maroon 2.5cm. Tan leather trim around brim, tan leather chin strap. Traditional pith helmet four (4) hole domed type vent on top of crown. Beige leather sweat band pierced around the top and with a cotton cord adjustment threaded around. Fixed to shell in four points diagonally. Interior is also covered in Khaki cotton. Hand written in brown ink. A1917 F/Lt C KERR GRANTworld war two, head dress, helmet, pith, cork, cloth covered, leather trimmed, royal australian air force, officer, flight lieutenant, khaki, pith helmet, air force, tropical, hat

Edward Cook & Co were soap makers and chemical manufacturers in Bow, London. The company registered its new name in 1898. It was later taken over by Unilever. The document, issued for use during the First World War for its employees is dated 29 December 1915. While days of prayer were traditionally conducted in parish churches, large companies also undertook to hold the services during World War 1. This work forms part of the collection assembled by the historian Dorothy Rogers, that was donated to the Kew Historical Society by her son John Rogers in 2015. The manuscripts, photographs, maps, and documents were sourced by her from both family and local collections or produced as references for her print publications. Many were directly used by Rogers in writing ‘Lovely Old Homes of Kew’ (1961) and 'A History of Kew' (1973), or the numerous articles on local history that she produced for suburban newspapers. Most of the photographs in the collection include detailed annotations in her hand. The Rogers Collection provides a comprehensive insight into the working habits of a historian in the 1960s and 1970s. Together it forms the largest privately-donated collection within the archives of the Kew Historical Society.Order of Service of Prayer held on 29 December 1915. The service included a Prayer for our Soldiers and Sailors and a Prayer for Victory and Peace. world war i, wwi, the great war, religious services, homefront, first world war, 1914-1918

Badge Day is held during Legacy Week, traditionally in September, when collectors sell badges on the streets to raise funds for Legacy. These photos show volunteers and legatees in Legacy House during the day. Many have collection tins. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of past Badge Days.Colour slide x 4 of Badge Day activity in Legacy House in 1959 in cream Anscochrome mounts.The mounts are imprinted with 'SEP59' by the manufacturer, plus individual slide numbers (3, 4, 5, 6, 8, 9, 10, 11, 12, 13) other numbers may be found later.badge day, fundraising