Trooper John William Lockey (1892-1978) was born in Durham, England. He enlisted 24/11/1914 in Bendigo in the 4th Lighthorse with the service number 946. At the time of enlistment he was a miner. He was wounded at Gallipoli by a bomb wound to the foot on 25/8/1915 and was subsequently invalided to Australia on 17/9/1915. Frank Augustus O'Neill (1885- ) was born in Bendigo. He enlisted into the 4th Lighthorse on 12/12/1914 with the service number 1415. He returned to Australia in March 1916 and was medically discharged due to a double hernia.Attached to card 1 brass 5 pointed star & 1 brass button showing a crest with lion & unicorn. Card has notations reading, this star was taken from a dead Turk by Trooper Lockie of 4th LH on 9th July 1915 & this button was taken from a English soldier who was killed in Gallipoli in 1915. Sgt F A O'neill.military, world war 1, buttons

Uniform Trousers - MMTB - dark blue serge cloth, red stripe or bead on the outside of the trousers vertically, two front pockets, one back pocket from heavy calico cloth, belt loops, buttons for a pair of braces to be attached if needed, white cloth inner band at the top of the garment, button up fly and leather strips around the front of the trousers at the bottom where they would contact a shoe. Stamped inside on a pocket - "This garment has been permanently creased" and on the top band on the inside stamped "7-65", probably indicating the date of manufacture.trams, tramways, mmtb, uniforms

Set of four types of coat buttons: 1 - MMTB button or Badge - brass - made by Buttons of Birmingham UK - approx. 25mm dia. 2 - MT - (Cable tram) button - brass - made by Stokes and Sons Melbourne - approx. 25mm dia. (this is to be clarified as at 24/6/2018, though see detailed image of a conductor in uniform - Reg Item 1961.) 3 - Dept of Govt Transport - Tasmania? - has a crown in the centre, - nickel silver with brass back and formed loop to sew onto a jacket or be pinned. 4 - Two badges both with the Islamic symbol and star (5 points) - brass, one marked "Tramways" and the other "Tramways Caire" - Cairo. The first badge made by "A. Meyer & Co. Wien".trams, tramways, melbourne tramways, uniforms, buttons, cairo, tasmania, cable trams

Set of seven nickel silver MMTB Coat buttons and two brass. Buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne. The badge backing piece is nickel silver or brass. They are fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Three of the Stokes and Sons badges have one two small hole,trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Set of eight small silver MMTB Coat buttons with brass backs and hooks. Five of the buttons (approx. 16mm dia) are made by Stokes and Sons Melbourne and three by Buttons of Birmingham UK One of the button has a metal clip in the rear. Four large, one brass finished and three nickel silver buttons, 23mm dia. with brass backs and hooks. Two by Stokes and Sons and two by Buttons of Birmingham.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Inspector's Cap - MMTB - green cloth exterior, brown cotton interior lining with black leather pad on the inside, black leather internal hat band, black cotton hat band on exterior with a black cord at the front half of the cap terminating in two small MMTB gold metal buttons on either side, black plastic external peak and green on the inside of the cap. Hat band has two gold bands or braids around the outside of the cap. Has a manufacturers lable inside the cap - made by Mountcastle Pty Ltd of Melbourne St South Brisbane. Has two holes where the badge would have been fitted. Set of two uniform coat buttons (approx. 16mm dia) are made by Buttons of Birmingham UK. Both button have metal eye hooks on the rear. Advised of the make by Peter Hyde of the Brisbane Tramway Museum 7-1-2018.trams, tramways, uniforms, cap, buttons, inspectors, mmtb

Set of four nickel silver MMTB Coat buttons with brass backs and a sewing lug or ring on the rear. All of the items are made by Buttons of Birmingham - name stamped into the rear section. Two large - 22mm diameter and two 15mm dia. Received in a small envelope with information that they were issued by the Interim Tramway Board. The design appears to be similar or identical to that of the MMTBIn a small manila envelope "2 large and 2 small buttons issued by the (interim) Tramways Board on their uniforms of its cable tram crews"trams, tramways, melbourne tramways, uniforms, buttons, tramway board, cable trams

Each button has the logo of the Melbourne Tramway and Omnibus Co. pressed into the front of the badge - a M interwoven with a T. All made by Stokes and Sons of Melbourne. Worn by Cable Tram employeesDemonstrates buttons worn by the MTOCo staff.Set of five MTOCo coat buttons fitted with hooks - nickel plated brass - 3 large coat, 2 small sleeve or cap.trams, tramways, cable trams, mto co, buttons, uniforms

Button has the raised letters "P & M Tramway Trust" on the front of the badge and the imprint of Stokes & Sons Melbourne on the rear. Used by the Prahran and Malvern Tramways Trust for their Uniforms. See item 517 for another example.Demonstrates buttons worn by the PMTT staff.Button, brass fitted with a hook and a clip - small sleeve or cap.trams, tramways, buttons, uniforms, pmtt

Coat button - round metal with a stamped imprint of The Met logo and painted gold. Has an eyelet or ring fixed to the back and with the raised letters "Stokes and Sons".trams, tramways, buttons, the met, uniforms

Set of six large gold Coat button and four small cap buttons. Has an eyelet or ring fixed to the back and stamped either "Stokes and Sons Victoria" or "Stokes and Sons Australia" 8 additional buttons added from Ron Scholten 11-6-2022.trams, tramways, buttons, mmtb, uniforms

Uniform Trousers - MMTB - dark blue serge cloth, red stripe or bead on the outside of the trousers vertically, two front pockets, one back pocket from heavy calico cloth, belt loops, buttons for a pair of braces to be attached if needed, white cloth inner band at the top of the garment, button up fly and leather strips around the front of the trousers at the bottom where they would contact a shoe. No size markings.trams, tramways, mmtb, uniforms

The Union commenced as the Australian Tramway Employees Association in 1910. Changed its name in 1934 to the "Aust Tramway & Motor Omnibus Employees Association" so as to incorporate bus drivers of motor omnibuses. Became part of the Rail Transport Bus Union in 1993. See reference. Union members were issued with badges to indicate their membership. They were permitted to be worn on their uniforms. See item 7087 for a non-Victorian version and 915 for another example.Demonstrates a badge issued to members of the ATMOEABadge - made on a brass/gold backing with painted enamel on the front. On the central portion of the badge, had the ATMOEA logo, with the words "Vic" with red enamel backing, and on the outer edge of the badge "Aust Tramway & Motor Omnibus Employees Association" with a royal blue background. On back of badge has clip for fitting through an opening on a jacket button hole or coat lapel. On top of back of badge has number stamped in "3104" and bottom words "K. G. Luke / Melb." indicating manufacture. The second badge, has a retaining pin clip and is numbered 5541. tramways, trams, badges, personnel, unions, atmoea, employees

Manufactured for the Hawthorn Tramways Trust for use on Uniform Jackets and Great Coats. Demonstrates a button made for the HTT Set of four Coat buttons for the Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and has the name of the manufacturer stamped on the rear part. See item 581 for another example, smaller in diameter. tramways, trams, badges, uniforms, hawthorn, htt, buttons

Pressed metal uniform badge for the Melbourne Tramways Board, workshop staff, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "Car Works" and number "25" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with wire. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons.trams, tramways, badges, employees pass, tb, workshops, tramway board

Set of three coat buttons: 1 - Small Prahran and Malvern Tramways Trust - PMTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. 2 - Large PMTT - heavily worn - made by Stokes and Sons Melbourne - approx. 26mm dia - missing lug. 3 - MMTB button or Badge - damaged - made by Buttons of Birmingham UK - approx. 25mm dia. Each button has a backing piece on rear with a lug (except for 2) for sewing onto a jacket and have name of manufacturer stamped on rear part. "Buttons Ltd" of Birmingham, England has their trade mark, a pair of fully opened scissors.trams, tramways, mmtb, melbourne tramways, uniforms, buttons, pmtt

Pressed metal uniform badge for the Melbourne Tramways Board, Employees, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "TRAMWAY EMPLOYEE" and number "10" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with a brass rivet. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons, see all Reg Items 394 and 579.trams, tramways, badges, employees, tb, mmtb, passes

Small Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, htt

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

White baseball style cap, with a "Love your trams" symbol on the front and "Yarra Trams" logo on the rear. Velcro strap on rear. Sew with white cotton, button on top, stiff card peak to the cap.trams, tramways, cap, yarra trams

Button used by The Met on their uniform jackets with the first logo or symbol used by The Met.Demonstrates a The Met Uniform button.Button - brass - The MTA (Metropolitan Transit Authority) of The Met logo with a raised metal finish - made by Stokes Australia - approx. 23mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Two copies held. The second copy has a section of thread wound around the lug,"Stokes & Sons Australia" stamped on the rear.trams, tramways, melbourne tramways, uniforms, buttons, the met, mta

Slacks - garment is part of a Women's Service Dress uniform. Possibly issued to "BALAAM", Service No. "F380519" Refer also Cat No. 9616.1. Slacks - dark green colour wool and polyester, full length slacks with belt loops. Front nylon zipper fly, brown colour plastic button at waist - no pockets. Manufacturers labels - two, inside back of waistband, exterior back of waistband - (to be removed when worn). White colour polyester fabric. 2. Belt - fabric as above with keeper and metal press stud closer.Manufacturers label - black ink print. Inside back "A.G.C.F. VICTORIA 1980 ^/ 8410-66-096-5182 size 10, AVE HGT/ FULL HIP/ WAIST 60 CM HIP 90 CM" Garment care instructions under headings "HAND WASH, MACHINE WASH IRONING", Followed by "NAME/ Service No.". Outside back "THE TAG IS FOR IDENTIFICATION ONLY/ PLEASE REMOVE BEFORE WEARING" with printed and handwritten information.uniform, womens trousers, army, balaam, passchendaele barracks trust

Cardigan - garment part of a Women's service dress uniform. Item issued to "BALAAM" Service No. F320519". Refer also Cat. No. 6916.Cardigan - dark green colour, wool blend ribbed knitwear with front edges and collar. Five button holes, no buttons. Pale green colour rank insignia sewn each upper arm. Two manufacturers labels - inside collar - white cotton fabric with handwritten information.First label - "BROMLEY K/W/ ^ 1981/ DSN 8410-66-097-7813/ SIZE 14/ SERVICE NO./ NAME" Second label - detail cleaning instructions under the headings "Machine wash" and "Hand Wash". Handwritten information - black ink pen. "F3205719/BALAAM".uniform, cardigan, army, balaam, passchendaele barracks trust

Summer dress uniform, dress, jacket and slacks. Fabric - light green colour, wool/polyester. 1. Dress - with wide collar, front opening with five button holes, no buttons, short sleeves with self cuff. Two inset front pockets and pair of box pleats. Manufacturer's label back below collar - white cotton label. 2. Jacket - with wide collar, front opening has button holes, no buttons, short sleeves with self cuff, two inset front pockets. Two manufacturer's labels - back below collar and exterior of left pocket. 3. Slacks - full length slacks - no belt loops. Front metal and nylon zipper fly, green colour plastic button at waist. No pockets. Two manufacturer's labels, inside back of waistband, exterior back of waistband (to be removed when worn). White cotton/polyester fabric. 4. Belt - with keeper and gold colour plastic buckle.Manufacturer's labels - black ink print. 1. "A.G.C.F./ VICTORIA/ 1978/ ^/ 8410-66-097-0796/ size 18 AV HEIGHT/ AV HIP/ 100 CM BUST/ 80 CM WAIST/ 105 HIPS/ FABRIC/ WOOL/POLYESTER/ NAME/ SERVICE NO." with "LAUNDRY INSTRUCTIONS" 2. Inside collar "A.G.C.F./ VICTORIA/ 1980/ 6/ 8410-66-097-0841/ SIZE 14 AVE HEIGHT/ FULL HIP/ 90 CM BUST/ 70 CM WAIST/ 100 CM HIPS/ FABRIC/ WOOL/POLYESTER/ NAME/ SERVICE NO." Pocket - THIS TAG IS FOR IDENTIFICATION ONLY/ PLEASE REMOVE BEFORE WASHING" with printed and handwritten information. 3. Inside back of waistband - same as 2. Inside collar label. Exterior back of waistband - same as 2. exterior of left pocket. uniform, summer service dress, army, browne, passchendaele barracks trust

Refer Cat. No. 6939.6Service Dress Shirt with neck scarf. Fabric - cotton polyester colour, patterned with alternating bands of dark and light green vertical stripes of varying width. 1. & 3. Shirt - with wide collar, six white colour plastic buttons on front placket, long sleeves with two white colour plastic button cuff. No pockets. Manufacturer's label - inside back of collar. White cotton fabric. 2. & 4. Scarf - long rectangular shape with each end cut on the Diagonal.Manufacturers label - black ink print. 1. “SANDRA LEIGH/ QUEENSLAND/ 1981^/ 8410-66-097-4954/ SIZE 14 TLL/ NAME/ SERVICE NO". Followed by "WASHING INSTRUCTIONS" 2. "WILLS INDUSTRIES/ WESTERN AUSTRALIA/ 1983/ ^/ 8410-66-097-4954/ SIZE 16 AVE/ NAME/ SERVICE NO". Followed by washing instructions.uniform, women's service dress, army, browne, passchendaele barracks trust

Raincoat - garment part of Women's Service Dress Uniform. Possibly issued to "BALAAM" Service No. F320519. Refer also Cat No. 6916.Raincoat - dark green colour plastic waterproof fabric. Below length coat with collar, long sleeves, two front patch pockets with flaps, front opening with concealed button placket. Five dark green colour plastic buttons. Two manufacturer's labels sewn to fabric - white cotton fabric. First label - front placket lining. Second label - inside behind left pocket.Manufacturers information - black ink print. First label - "INSTRUCTION LABEL" with details on laundering and drying garment. At bottom "NAME/ SERVICE NO". Second label - "KINDRED MANUFACTURING/ PTY LTD/ QLD 1983/ D.S.N. 8410-66-030-2060/ SIZE 10/ SERVICE NO./ NAME."uniform, raincoat, army, balaam, passchendaele barracks trust

This hat and hat box was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” which includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. McDade is the surname of Dr Angus’ daughter Berry (Berenice) McDade nee Angus. This had belonged to her father Dr William Roy Angus, Surgeon and Oculist (1901 –1970), who wore it on the ship T.S.S. LARGS BAY when travelling from Australia to Scotland for extended studies to be a “Fellow” of the Royal College of Surgeons in Edinburgh in 1929. This bicorn, cocked hat was worn with narrow points towards the front and back. It is decorated with flat gold braid or ‘lace’ with a geometrical design. Regimental lace was worn on the uniform and headdress of regimental officers in the 19th century. Gold lace chevrons were worn on coats to signify rank. Drummers and Foot Guards also wore regimental lace to distinguish them from other military personnel. In the late 19th century the English and Welsh infantry officers’ uniforms displayed a rose-pattern lace. The gold bullion and underlying crimson ‘eyes’ have been used to signify the rank of the owner. Crimson eyes were used for military personnel, and blue eyes were used for naval personnel. Different numbers and colours of the bullion and eyes may have been used to represent different military ranks. The Regulations specify nine tassels and eleven underlying eyes but there could have been variations. We have not yet identified the rank for this particular hat but hats such as this were part of the Australian and British naval uniforms in the early 20th century. The gold button’s emblem features a cross with five stars, a crown, and the motto “AUT PACE AUT BELLO,” which translates as “either in peace or in war.” Museum Victoria has a similar button and writes that buttons with this design were used by the Victorian Volunteers in the nineteenth century. The Australian War Memorial Curator of Military Heraldry advised Museum Victoria that these buttons dated from 1880 to 1892 and were worn by regular, unranked soldiers. Tasmanian Midshipman Alan Casey, who served the British and Australian Navy from 1919 to 1933 and retired as a Lieutenant Commander, owned a similar officer's bicorn hat. His hat and epaulettes are in the Tasmanian Maritime Museum's collection. The Australian War Memorial has a hat that is very similar in design, described as an “Artillery Staff Officer’s cocked had with plume, worn by Volunteer Artillery Staff in the Victorian Colonial Military Forces”. That hat is different in that it has a plume and the braid and button are silver. Berry MdDade, the donor, has used the hat many times as a dress-up hat but doesn’t know the origin of it. The hat seems to fit the design of the Staff Officers in Victorian Volunteers in Colonial times, but the button on this hat was used for unranked volunteers. Also, military uniforms usually have very clear manufacturer’s labels, as they are made by reputable companies under contract to the Defence Department. The manufacturer’s mark is not discernible on this hat. The origin, original wearer and use of this particular hat is unclear. The military bicorn cockade hat belonged to Dr William Roy Angus and is part of the W.R. Angus Collection. It is significant for still being located at the site connected to Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, as an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Black bicorn cocked hat and case. It appears to be part of a 19th-century Colonial full-dress naval officer's uniform. The long, narrow crescent-shaped hat is made of beaver fabric and the crown is lined with crimson silk and finished with a hand-stitched leather sweatband. On one flat side is a pleated black silk, lace cockade woven in the pattern of oak leaves and acorns. The cockade is overlaid with a double row of gold lace braiding secure with a Victorian Volunteer’s gold button. Wide diagonal bands of black lace braid trim are on each side of the gold braiding. The other side of the hat is plain. The front and back points of the hat each have seven gold bullion tassels with nine underlying twists of crimson ‘eyes’. The fitted metal carry case has a catch and a plaque on one side. The button bears a crown and cross with five stars and a motto. Inside the hat is a white name tag with clear adhesive over it, with black printed text with the name “Mc Dade”. The hat is part of the W.R. Angus Collection.The hat has no maker’s marks although there is a darker colour in the centre where there could have been a label. Inside the hat is taped a printed label; “Mc DADE 801 1032” Button’s emblem- a cross with five stars, under a crown, all within a buckled belt with the motto “AUT PACE AUT BELLO” [either in peace or in war] The plaque on the case has no legible marks.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, t.s.s. largs bay, berry mcdade, 19th century colonial military uniform, artillery staff officer’s cocked had, victorian volunteers, victorian colonial military forces, colonial militia, aut pace aut bello, cocked hat, cockade hat, bicorn hat, military bullion, oak leaves and acorns pattern, gold bullion tassels, military heraldry, w.r. angus collection., australian navy, british navy, uniform

This cable tram Gripman’s badge, or driver’s badge, was part of a tram driver’s uniform. The inscriptions on the front of the badge identify it as belonging to Gripman number 14, at the South Melbourne Car House depot of the Tramways Board. The Gripman Badge would be re-issued whenever another Gripman takes over the position. Cable trams were invented in America in 1873. In Melbourne, cable trams were in use from 1885 until 1940, with a network of up to 1200 cable cars or 'dummies' and trailers travelling at around 9.5 miles (15km) per hour along 46 miles (74km) of double tracks. The Gripman drove the dummy car, operating the heavy levers to connect the gripping gears to the cable installed in a slot in the road. To turn at intersections he would skilfully disconnect, freewheel around the corner and carefully reconnect to the continuously operating steel cable. Large winding gears in an Engine House along the line pulled the cable along, powered by steam engines and later electric engines. The gripping gears were in the centre of the car's floor with seating all around the sides, a dangerous place for curious children. , whose worried parents would guide them into the tram that was towed behind the dummy car. The Melbourne Tramways Board operated the cable trams between July 1916 and November 1919 after taking over from the privately operated Melbourne Tramway and Omnibus Company. In 1919, the Melbourne and Metropolitan Tramways Board (MMTB) took over the Tramways Board. Stokes & Sons: - The maker of the badge, Thomas Stokes, migrated to Melbourne from Birmingham in 1854 and set up business in Mincer Lane as a die-sinker, producing medals, tokens, buttons and silverware, and an engraving service. He moved to Flinders Lane in 1856. After a time, in 1894, the business became Stokes & Sons Pty: Ltd, electroplates and badge makers at Post Office Place in Melbourne. The maker's mark 'Stokes & Sons' was made on badges until 1962. LOCAL CONNECTION: -t was common practice to recycle the used cables from the tramway. For example, the Wollaston Bridge in Warrnambool, Victoria, is suspended by recycled cable tram Melbourne. (Other recycled cables were used for fencing wire.) -Portland's cable tram is an example of the cable trams used in Melbourne from 1885 to 1940.This badge was used to identify a Gripman who operated a cable car tram's dummy car for the Tramways Board in Melbourne between 1916 and 1919. It represents the need for people to be able to identify workers in the service industry, a need still addressed today by staff ID badges and digital identification. The badge also represents the period in Melbourne's history when cable cars were used for public transport for over four decades, gradually changing from steam to electric power. Trams still have an important role in Melbourne's public transport. Badge, round hollow metal dome with two open metal guides on the back. A cable tram Gripman (driver) badge with embossed inscriptions on the front and stamped on the back. There is a logo of entwined letters T and B on the front. It identifies Gripman number 14, South Melbourne, Tramway Board. It was made by Stokes & Sons of Melbourne. Impressed into the front: "S / 14 / M" "GRIPMAN" Logo intertwined "T" and "B" Embossed on reverse "STOKES &o SONS"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, badge, gripman, stokes & sons, numesmatics, tramway, tram, tram driver, uniform, cable tram, identification, cable car driver, tramway board, south melbourne, melbourne tramways board, tb, mtb, mmtb, melbourne and metropolitan tramways board, tramway button, gripman button, id, identification badg, staff badge, name badge, employee, grip car, dummy car

This sailor's collar is part of a naval uniform. It once belonged to R S Wallace, who served in the RAN (Royal Australian Navy) and on the HMAS Warrnambool for three years. After the war he made several ship models including the sailing ship Cutty Sark. From January 1857 the Australian Navy uniform was formally established. The uniform, referred to as a 'sailor's suit', includes a blue flap collar such as this one. Sailors in the Royal Australian Navy wore collars of this design from the early 20th century. The rating personnel of the Royal Canadian Navy were issued with a very similar collar from 1910 to the 1950s. The blue denim collars were buttoned or died inside their tops with the back and the striped portion of the front flaps showing.The square sailor's collar represents the uniform of a rating sailor in the Royal Australian Navy in the early to mid-20th century, connecting it to the maritime history of Australia and the evolution of the uniform of the navy. The collar is the only one in this museum's collection and is connected to a sailor who service in the RAN on the HMAS Warrnambool for three years.Sailor's collar. A square collar of blue cotton fabric with three flaps or strips. Three white stripes make a border on the outside edges and two flaps; the centre flap that has no stripes. There is an inscription. The underside is lined with white cotton fabric that has thin blue stripes. Tapes are attached for fastening the collar. The Royal Australian Navy collar once belonged to R S Wallace."R.S. Wallace"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, sailor’s collar, sailor’s uniform, uniform, military, navy, ran, royal australian navy, r s wallace, seamen's collar, australian defence forces, naval force, sailor's rig, flap collar, naval collar, robert s wallace, collar, sailor's uniform, world war, hmas warrnambool, sailor's suit