This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of a uniform worn by soldier ranks for daily work and dress parades.Khaki coloured long trousers with attached suspenders. They have a button up front (5 brown plastic buttons). There are two pockets on either side of the trousers and one button up pocket on the back right with a flap that is fastened with a single brown plastic button. There are three extra brown plastic buttons on the back exterior of the waistband and six belt loops on the whole length of the waist band. The interior pocket fabric is more light weight and a slightly more green in colour. The interior of the right back pocket includes a white patch of fabric with printed inscriptions and further inscriptions written in black ink just above. The suspenders are composed mostly of blue, grey, beige, black and cream striped thick fabric. There are also silver coloured metallic components (which include inscriptions) and leather sections, most of which have a reddish/brown coating on the exterior and a white coating on the interior. One leather component has inscriptions in black ink on the interior as opposed to a white coating. The suspenders are attached to the trousers by six brown plastic buttons on the interior of the waistband. Back pocket interior inscriptions on the green fabric: HUGHES / 3795948 Back pockket interior inscriptions on the white fabric: E.W. P/LTD. / SOUTH AUSTRALIA / 1968 / (a symbol of a broad arrow) / Class 8405-66-025-6405 / Batch 67 / Mill / Size and Waist 28C / Matching Jacket 35 /36C / DRY CLEAN ONLY / CREASES SET BY SIROSET / REPRESS ON ORIGINAL CREASES / MENDING PATCH ATTACHED / NAME HUGHES. J.W. / ARMY No. 3795948 8PL Bcoj Identical metallic clip inscriptions on two of the suspenders: POLICE / (embossed image of a police baton)royal australian engineers, warrnambool rsl, warrnambool, engineer, hughes, sapper hughes, 3795948, hughes 3795948, uniform, army uniform, trousers, army

The drawing provides details of the two sets of springs that fit on either side of the axle box of a Brill 21E four-wheel truck. Gives load, sizes, and material dimensions. Revision E dated 7-11-1958. Prepared by the MTTB for use on four-wheel trams. Original drawing dated 30/9/1927Yields information about Brill 21E truck axle box springs.Drawing Foolscap size with two punched holes on the left hand side.tramcars, 21e trucks, brill 21e, springs, mmtb

Clothing. Navy blue, wool, fully lined blazer, presumably worn by a drum section member as the right sleeve has a cloth badge, embroidered with a drum. Long sleeves are elaborately decorated with red felt and gold braid, and finished with three gold plastic buttons bearing the impression of a laurel wreath, and horn as a replica of the British Light Infantry. Two splits on back - one on each side of centre back. Red felt with four peaked stripes of gold braid, on the lower right sleeve - possibly indicates rank of the drummer. Red felt epaulettes trimmed with gold braid and buttons (as above). Two false pocket flaps - one either side of front. Fully lined with a woven patterned taffeta. Sleeves lined with cream polyester (?) with a self stripe. A red felt tab on either side of front revere collar, bearing a metal Leidertafel badge on each tab. One inside pocket on right front. Double breasted.Back of buttons:Stokes & Sons,Melbourne. On internal pocket A.Hayman. Product by Europe Modes for Comfort. Style. Stamina. And an embroidered hand, holding a torch and flame.costume, male ceremonial, band blazer

"Herbert Rex WILLIS" Reg No. 342872 Service Details. Refer Cat No. 5231.31. Jacket - Khaki colour, wool serge fabric, Battle dress style, belted at the waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder insignia - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia on sleeves - brown, white and red, - Warrant Officer Second Class. Service Ribbons above left pocket L-R, Vietnam Campaign Medal. Long Service Medal, South Vietnamese Medal with clasp "60-". Light khaki colour cotton twill fabric lining. Manufacturers white cotton twill fabric label - inside on left pocket lining. 2. Lanyard - dark blue colour cotton cord with knots. 1. Manufacturers information on label - black ink print "REGIMENTAL NO./ NAME", Red ink print "M.TX/IZE 5". On pocket lining - purple ink "D^D/ MADE IN AUSTRALIA/ 1954. On collar lining - handwritten, black ink pen "WILLIS" .uniform, army, battle dress, rex willis

A fob watch is an instrument for measuring time. It is designed to hang from a chain that is attached to a wearer's waistband or waistcoat. The chain keeps the fob watch from being dropped or falling out of a pocket. A person possessing a fob watch or similar instrument in the 18th century would be viewed as someone in a good financial position and often a position of power or respect. It was a social statement as well as a useful object.Silver pocket watch and brass iron winder. Watch has Roman numerals on face and gold flower, floral and diamond shaped motif. Marked "0.800 x/5 115/15 39443" Picture of a bird, flying, griping a painter's pallet and brushes and another separate picture of a bird. There is also a floral pattern on the back of the watch. The winder has a number "6" or "9" on one face and a symbol similar to the "Star of David" on the other.Marked "0.800 x/5 115/15 39443" . The winder has a number "6" or "9" on one face and a symbol similar to the "Star of David" on the other.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pocket watch, watch, horology, time keeper, fashion accessory

AMCU (Australia Multi Camouflage Uniform) Combat Dress colours - light to dark green through to mid to dark brown. Cotton/polyester fabric. Green colour plastic buttons. Nylon and metal zippers. 1. Shirt - polo style, with collar, long sleeves with adjustable velcro and strap at cuff. Two large sleeve pockets with hook and pile closure flaps, one small pocket left sleeve. Half zipper closure. Front and back of shirt - plain khaki colour knit fabric. No manufacturers label. 2. Trousers - waist band with belt loops, two front pockets, two large side pockets with zipper closure, two small pockets with hook and pile flap closure, zipper fly. White colour polyester fabric manufacturers label on right pocket lining. Green cotton fabric pocket lining. At ankle - elastic drawstring with plastic lock clip.Manufacturers information on label - black ink print. 2. "ADA/ MADE IN AUSTRALIA/ NOV 2018/ PO: CC36LD/ NSN:8415 66 161 6292/ SIZE: 34l/ 84-89 cm/^/ NAME/ PM KEYS NO:/ MAIN:/ 75% COTON/ 25% POLYESTER/ STRETCH/ 91% NYLON 9% ELASTANE/ KNEE PADS MUST BE REMOVED BEFORE/ CLEANING. HOT MACHINE/WASH. NO BLEACH/ NO FABRIC SOFTENERS/ MAY BE TUMBLE DRIED HOT/ DO NOT IRON OVER/ STRETCH PANELS OR HOOK AND PILE" .uniform, army, combat dress, amcu

AMCU (Australian Multi Camouflage Uniform) Combat Dress colours - light to dark green through to mid to dark brown. Cotton/polyester fabric. Green colour plastic button. Nylon and metal zipper. Trousers - waist band with belt loops, two front pockets, two large side pockets with zipper closure, two small lower pockets with hook and pile flap closure, zipper fly. green cotton fabric pocket lining. At ankle - elastic drawstring with plastic lock clip. White colour polyester fabric manufacturers label on right pocket lining. Light khaki colour plastic knee pads insitu. Manufacturers information on label - black ink print. "ADA/ MADE IN AUSTRALIA/ FED 2019/ PO: CC3623/ NSN: 84155 66 161 6287/ SIZE 32R ( 79-84 cm/ ^/ NAME:/ PM KEYS:/ MAIN: /75% COTTON/ 25% POLYESTER/ STRETCH:/ 91% NYLON 9% ELSATANE/ KNEE PAD MUST BE/ REMOVED BEFORE/ CLEANING HOT MACHINE/ WASH, NO BLEACH/ NO FABRIC SOFTENERS/ MAY BE TUMBLE DRIED HOT/ DO NOT IRON OVER STRETCH PANELS/ OR HOOK AND PILE".uniform, army, combat dress, amcu

'Rapid' tobacco tin for storing tobacco and contains 'Tally Ho' rice tobacco papers. Used for rolling own cigarettes. Chrome finished pocket size tin with canvas rolling mechanism. Tin lid is embossed with a decorative star/sun design. The tin is curved slightly to sot in a jacket pocket and making it easier hold when in use.'Rapid' stamped near the front edge of the lid.personal effects, smoking accessories

Items in the collection re Col J. Swatton, refer to Cat No6719.2P for his service details.This is a pocket size book. The cover is buckram, dark maroon. It used to have black printing but this has faded. It has over 139 pages of text and maps on how to conduct battle with tanks and armoured cars.passchendaele barracks trust, 1927 manual, book, tank warfare

Friday, September 28, 1883 was a memorable date for Wycheproof as on that day was the long-awaited official opening of the railway. It was recorded that no less than 23 parishes would act as feeder to the rail line. The Railway Station closed in December 1990 but the building was renovated in 2010 with plans for a community focus and cultural events.The arrival of rail opened up the Mallee. Local farmers began sending wheat, sheep and wool by rail. Improvements to transport stock was ongoing and the eventual rail extension north of the town, resulted in a well patronised passenger service for years. Railway families and workers added to the culture of the town.Display Book of A3 size with 20 pockets of Wycheproof Rail information. It includes a collection of newspaper and magazine articles, photos, rail drawings, train calendar, paint colour legend and other rail references.sea lake, railway, rail-drawing, last-passenger- train, centenary- train, train - calendar, steaming- up- broadway, wycheproof - rail

Souvenir colouring and activity book and set of colour pencils for children. Contains illustrations of a family of four undertaking various tourism activities such as visiting Deborah Gold Mine, Bendigo Pottery and the Chinese Dragon.A4 size, twelve page illustrated children's activity book with set of six coloured pencils. Book includes pages to colour in and find-a-word puzzles. Coloured pencils are housed in separate plastic pocket.Bendigo / The Centre of Attraction / Activity / Book / Bendigo / The Centrepiece of Victoriacity of greater bendigo tourism

Khaki trousers with two side pockets and one back pocket. Tag - FLETCHER JONES VICTORIA 1998 ARROW indicating Govt. NSN 8405-66-139-0872 NAME. SERVICE NO. 70% Wool 30% Polyester 30% DRY CLEAN ONLY(A) Press on original creases. Use damp cloth. Warm iron

This brass cow bell was recovered from the wreck of the sailing ship ‘Loch Ard’ at Mutton Bird Island, near Port Campbell, Victoria, from late 1960s to early 1970s. Cow bells were listed as part of the cargo on board the Loch Ard. This bell is now part of the John Chance collection. Flagstaff Hill Maritime Village’s divers also recovered similar bells from the Loch Ard wreck in 1973. One of them was found in a sandy hole in the centre of the wreck site. All of the recovered cow bells are without their hangers. A bell of this size could have been used by horse or cattle teams. Cow bells were a common Colonial item. They were hung around the necks of grazing domestic cows and goats, bullock and horse teams, even camel teams so that they could be found again. Sheep and cattle drovers used them as a warning for night time disturbances such as wild animals. The maker of the cow bell, James Barwell, was a bell founder established in Birmingham, England, from 1784. In 1842 he acquired Fiddian’s firm of ‘Steam and Water’, keeping its name and stamping it on some of his products. According to his advertisement in the Exhibitors guide for the Church Congress of 1887, he made bells and fittings for churches and schools. He also made bells for cloches and chimes, and made tuned musical handbells. He repaired and reproduced bells, and he had a team of experienced ringers to “inspect towers and report upon the tone and condition of bells and fittings.” In 1903 he became incorporated as a Limited Company, ‘engineers’ and plumbers’ brasswork, and bell founders.’ In 1914 he advertised as ‘Cock and Bell Founders’, specialising in plumbing and engineering fittings, church bells, and “every description of hanging and hand bells.” Some of Barwell’s products were stamped with his maker’s mark (his initials J. B. either side of a cross entwined with a ‘B’ in an oval of oak leaves (for Birmingham)). James Barwell bells were no longer made after 1920. James Barwell was among makers who exported bells to the Australian colony from the 1860s. Early Australian iron animal bells were also made from the 1860s by blacksmiths such as Anthony Morgan from 1861, August Menneke from 1867, and Samuel Jones from 1868. Few brass bells were produced here in those times. This bell is historically significant as typical of a cow bell used by farmers and herdsmen in Colonial Victoria. Its significance is increased by being an artefact recovered by John Chance, a diver from the wreck of the Loch Ard and other wrecks in the late 1960s to early 1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The cow bell is also significant for being part of Flagstaff Hill’s collection of artefacts from LOCH ARD, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Cow bell; heavy brass, flat top, pyramid shape, rectangular head, shoulders flare out to rectangular mouth. The head has two same-sized tooled holes for adding the hanging yoke. Inscription on top and one side. Encrustations are on the metal in places. The hanger and clapper are missing. Made by James Barwell of Birmingham.Stamped on the head "BARWELL / - - - / - - -- ING" [Perhaps BARWELL - - - BIRMING. Could size be in centre? 3 3/4 IN?] Stamped on side [motif] (undecipherable) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, loch ard, mutton bird island, glenample, eva carmichael, tom pearce, james barwell, cow bell, horse bell, bell founder, bell smith, vintage bell, birmingham bell foundry, farmer, shepherd, drover, stock bell

Item issued to Robert George Bennetts. Refer 560.3 for service history.Peaked cap, blue with RAAF brass cap badge. Size 6 7/8. Black outer headband, narrow black plastic front strap secured with small brass buttons at either end. Tan inner headband with clear plastic top lining.Marked inside:"MTX size 6 7/8 A↑F Made in Australia 36088 RAAF Bennetts"raaf, headwear, peak caps

This preserving jar was used in the first half of the 20th century to preserve cooked food - pickles. Preserving home produce in bottles is a method that applies heat to food in a closed glass home canning jar to stop the natural spoilage that would otherwise take place. It removes air from the jar to create a seal. he bottling process forms an air tight seal between the bottle and the lid. Residents of Orbost have long been self sufficient growing their own fruit and vegetables with earlier market gardeners They preserved their produce for use all year. Fowlers Vacola preserving kits were common in most kitchens.A brown glass Fowler's Vacola preserving jar filled with pickles. It is a No. 27 bottle with a size 3 metal clip. It has an 850ml capacity. The lid has metal tension clips which are secured during the canning process and are removed once a vacuum seal has formed. The lid is tin-plated with a lacquer coating, double-coated on the underside.On lid Fowlers Vacola Size 3 Top of jar- embossed with the words Fowlers Vacola food-preservation fowlers-vacola container-glass

Fob (or pocket) watches were developed in Europe in the 16th century and gained wide usage during the mid 18th century until World War 1 when the wristwatch was invented. These watches were designed to be carried in a small pocket and attached through the means of a 'fob' which could be a chain or made from a variety of materials such as leather. Their popularity peaked in the nineteenth century where they were an important part of middle and lower class society as well.This item is of social significance as fob / pocket watches were valued as an essential object in all levels of society. For some occupations, such as the railroads, it was a necessary tool of the job. Steel York Lever open face pocket / fob watch dated between 1940-1960. The dial has an inner pewter circle, outer minute divisions and a circular insert and hand to show the seconds. The numbers are finely edged with a black line and the hands are two coloured. The back of the watch is patterned with fine lines and three rectangle shapes. The words 'ANTIMAGNETIC' are on the front of the watch. Anti-magnetic watches began to be made at the beginning of the 20th century as mechanical watches were affected by magnetic fields. The 'lever' set on watches was a requirement for railroad watches. It required a two step process for the hands to be adjusted. The front dial of the watch has the words 'YORK LEVER', 'ANTIMAGNETIC' and 'MADE IN GERMANY'. flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, fob watch, pocket watch, watch, horology, time keeper, york lever, anti-magnetic, made in germany

These trousers are part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) trousers in Airforce colours of blue and grey in camouflage pattern. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A193/ADA/MADE IN AUSTRALIA/JUL 2015/ PO: CC2X91/NSN: 8415 66 161 4017/SIZE: 95 R/(broad arrow)/NAME:............/PM KEYS NO:............./75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/DRYCLEANABLE (P)”camouflage, general purpose uniform, airforce, uniform, australian defence force

The coat was given out to the Royal Australia signal corpsOlive green thick wool 3 buttons one each side of the the middle of the coat two pockets on next to the buttons The size was 9 height 5.11 6ft on the on a tag under the bottom left button on the right Buttons have the words Australia military forces vietnam war, coat

Item issued to Murray METHERALL 35455. Refer Cat No 590.2 for his Service History.Trousers, work dress, cotton, green colour with 2 side pockets, 2 back pockets, 1 leg pocket & belt retainers.“YAKKA 1967 D [up arrow[ “uniforms - army, costume - male working, aattv

Developed by Dr Jack Lippes in 1962, the Lippes Loop was commonly used as a contraceptive device from the 1960s to the 1980s. Due to its low cost and the ease of inserting and removing the device, it quickly became the most popular IUD in the world during its time. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two sealed Lippes Loop IUDs, Size C. IUD and inserter are sealed inside a sterile plastic pocket. Manufacturer information is printed on a cardboard insert which holds each IUD inside the pocket. The packaging of the first Lippes Loop is printed with an expiry date of Jan 83 on the back. The packaging of the second Lippes Loop is printed with instructions for use on the back.l intrauterine device

These trousers are part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Disruptive Pattern trousers in five colours of green and brown. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A13/ADA/VICTORIA 2008/(broad arrow)/SPECIFICATION ARMY (AUST)6542/NSN: 8415 66 152 1059/SIZE: 95 S/NAME/SERVICE NO/75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/MADE IN AUSTRALIA” The name “FARLEY” is also handwritten on the back interior waist band of the trousers. camouflage, general purpose uniform, airforce, uniform, australian defence force

Standard Issue Australian Army Winter JumperminorKhaki V-neck Woollen army jumper. Re-enforced elbows Size ??

Fob (or pocket) watches were developed in Europe in the 16th century and gained wide usage during the mid 18th century until World War 1 when the wristwatch was invented. These watches were designed to be carried in a small pocket and attached through the means of a 'fob' which could be a chain or made from a variety of materials such as leather. Their popularity peaked in the nineteenth century where they were an important part of middle and lower class society as well.This item is of social significance as fob / pocket watches were valued as an essential object in all levels of society in the late 19th century. For some occupations, such as the railroads, it was a necessary tool of the job. Being dated to the early 1900s gives the watch historical significance as possibly being used during the first World War.Pocket watch with possible gunmetal case and brass winder. The white dial has black Roman numerals on the face (note the use of four lines for the number 4 and no markings for the number 6). The face has a circular insert and hand to show the seconds. All hands are gold coloured with the hour hand having a leaf shape. The case has a back cover, which opens to reveal an inner cover, which protects the workings. Both covers are inscribed with the number 877396. The back cover has the words ACIER GARANTI stamped into it, which means steel guaranteed and may refer to the screws used in the workings.Stamped inside the back cover in an oval shape - ACIER GARANTI with N.F. stamped in between the words. The number 877396 is stamped inside the back cover and again inside the middle cover. There is an indecipherable marking near the number inside the back cover and another scratching on the inside of the back cover which may be letters or numbers. The workings are inscribed with the words SWISS MADE and the manufacturer's circular stamp 'MOERIS'. The markings F, S, A and R are on the workings.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, fob watch, pocket watch, watch, 19th century, horology, time keeper, acier garanti, swiss made, moeris

About the 1992 Barcelona Olympic Games donator Doug Pleasance wrote- During the 1980s the Australian wool industry was at its most prosperous times with record numbers of sheep producing wool receiving ever increasing values due to the success of the Reserve Price Scheme, and the overall guidance of the Australian Wool Corporation (AWC). As a humble technichian, my role was a low profile newly created position of “Controller, Technical Marketing” where wool was to be marketed on its technical properties, as distinct from the “Product Marketing Group” which exploited trhe traditional high profile approach of marketing wool;s superior fashion attributes. The Woolmark was the tool central to this approach. The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The ensemble consisted of three elements- 1. The Official Uniform which was used for travel and all official functions. This included: a tailored blazer and trouser/skirt (all water repellent) by Fletcher Jones, pure wool olive-green faille fabric by Foster Valley, cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy. 2. Opening Ceremony Uniform a lightweight wool fabric printed with floral designs that had been inspired by the work of Australian artist Margaret Preston. This included: Lightweight W/PE shorts by Fletcher Jones in Foster Valley Fabric, socks by Holeproof and footwear by Hush Puppy. 3. Village Clothing was designed to be highly visible garments to make it easy to ‘spot the Aussie’ and helped to contribute to good team spirit. This included: A pure wool shirt featuring blocks of contrasting colours, and a newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.Green button up tailored jacket with two faux pockets and a breast pocket on left hand side. Olympic logo on left breast pocket.Label 1 - Barcelona 1992 Official Uniform Supplied by Australian Wool Corporation Label 2 - Fletcher Jones Australia On breast of jacket - Australia Barcelona 19921992 barcelona olympics, uniform, jacket, fletcher jones

Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers

Rectangular; khaki coloured; metallic zip that runs along two sides and the top; one outside pocket with press stud; carrying strap at back; two flaps both sides of strap with metal attachments for securing. Contents inside include shoe horn; pocket knife with two blades; two packaged large field first-aid dressings; two vials (in cardboard packaging) of Morphine Tartrate; one bottle of drinking water purifying tablets; one packet of 8 wound tablets; two packets sulfanilamide wound powder; one box 4” bandage compresses; one box eye dressing containing 3 cotton pads, 3 sets adhesive strips, 2 tubes boric acid ointment and 1 tube ointment; one packaged small first-aid dressing; one package containing two tubes of boric acid ointment. There is also a small piece of foil which was found deep inside the kit but it is unknown if it actually belonged here. Contents in outer pocket - one package containing ten iodine applicators; one package of adhesive 1” bandage gauze.On outside of kit - “Kit, First Aid Aeronatic U.S.” Underneath kit - red painted cross Pocket knife - Inscription on both sides with logo (M inside circle) “McEwan-Younger Ltd. Edinburgh”