Caulking is the use of cork or other substances to seal the seams and joints of the vessel to make them watertight. Caulking lasts for quite some time but eventually dries out and needs to be replaced. A mallet or hammer is often used with a caulking iron to drive it along the seams. The caulking iron’s blade is tapered to be narrower at the tip to make it easier to remove it from the joint. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.Caulking mallet; a thick wooden handle with a round ‘T’ cross-bar near the end. Metal reinforcing is added around the ends of the head. Both sides of the wooden head are flared outwards towards the end. The head is reinforced where it intersects with the handle and around the ends of the head just above the tips. It once belonged to shipwright Laurie Dinks.flagstaff hill, maritime museum, maritime village, warrnambool, shipwreck coast, great ocean road, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, caulking, ship maintenance, cooper, shipwright’s tools, shipwrights’ tools, tools, maritime trade, caulking mallet, caulking iron, laurie dilks, l dilks, port and harbours melbourne

Fighting pick appears to be from Papua New Guinea. (Tari Fighting Pick ?) Implement is made of wood (appears soft wood handle with hard wood head.) Pick/hammer shaped with head attached to handle by cane binding.Some grooving on rear of the head and small binding at back.Wood colour with some red coloring in the grooves at back of head.

Item used to simulate or play being a tram conductor, cardboard coins with paper images printed on each. Value was not printed, but equivalent about to a 2/-, 1/-., 6d, 3d and a 1d based on the paper size.Demonstrates a toy or item used by children to simulate or play being a tram conductor. Cardboard with printed coins cut for use as toys; 27 - 38mm dia with the Queens head. 10 - as above with a kangaroo 4 - 21mm diameter with the Queens head 4 - 18mm diameter with the Queens head 7 - 14mm diameter with the Queens head 1 - 18mm diameter with the Australian Coat of Arms. 1 - 14mm diameter with a sheaf of wheat. tickets, toys, conductors, tramways, coins

By the 19th century, porcelain had become the favored material for doll heads, and starting in the 1830s, high-quality china dolls hit the market. Most of these were made in central Europe, and often the assembly work was done by individual families, which is why many antique china dolls are not marked. German-made china dolls usually have black molded hair and blue eyes. The most common china dolls are Low Brow china dolls, made in the millions in the 1890s (so called because their hairdo has bangs and lays low on their forehead, giving them a "low brow").This doll is a good example of a late 19th century china doll.China-headed doll with soft body. It has a low brow,moulded black hair and is wearing a black dress with a white collar and cuffs. Over the dress is a white pleated, embroidered pinafore. It has a broderie Anglaise petticoat.doll toys china-doll

Shipwright maul with wooden handle, round head one end & pointed end other. Head 165mmL x 35mmW. 355mm overall.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, maul, shipwright maul, shipwright

Soldering Iron Length 16¼" Solder head attached to handle by two rivets. Wooden handle. Solder head has 16 stamped on it.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, soldering iron

8449.1 - Wooden shaft with rusted metal head. The head is very slim and narrow; one prong tapered into a point, the other flattened into a chisel.

A thick forged steel three pronged fork hoe head made by a blacksmith. There is a hole at the fork head where a handle can be attached.agricultural tools, gardening tools, hoes, gardening forks, handtools

Corroded nail with rectangular shaft narrowing to a blunt tip. The shaft is pinched below the head and there is a white deposit, possibly paint on the nail head.archaeology, historic building, former royal mint

Card with illustration, traditionally of a baby girl's head indicated by pink ribbons on her gown, holding a rattle, with greeting. Card with illustration, traditionally of a little boy's head as indicated by blue clothing, with greeting. Card with little child's head, with greeting.Greetings read: "With sincere congratulations and a hearty Welcome to the Little Stranger" "With warm Congratulations and a welcome united with best wishes" "To with kind Congratulations and a hopeful welcome to the New Comer"greetings cards, baby cards, gift cards

This boat hook head is in very good condition and has been manufactured. It would be attached to a pole or handle to give it a long reach. A boat hook is a common piece of marine equipment and many have been made by boat owners to suit their own purpose. They would also have been forged byblacksmiths and shipsmiths and have been available from ship's chandlers over the centuries. A boat hook can be used for many situations such as catching mooring ropes and chains, reaching rigging, pulling things or people out of the water, and a variety of fishing applications.This boat hook head is an example of equipment carried on vessels over hundreds of years for safety purposes and for general applications. Marine boat hook head, all brass. The body is a conical shape with a pointed end and curved, horn-shaped hook moulded into the side. The body is hollow until it reaches the hook's height. A screw hole is close to the base, in line with the hook.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, boat hook, marine, fishing, boating, equipment, boat hook head, rigging, safety equipment

Fighting pick. Appears to be from Papua New Guinea. (fighting pick of Tari.?) Implement in shape of pick with handle and head. Head attached to handle by way of cane binding. Appears to be soft wood handle and head of harder wood. The rear piece of the head behind the binding has carving notches and coloured blue,red,yellow and red inside the carvingpick, fighting pick, tari, papua new guinea

Black and white photograph, copy, of the metal poppet head of the 'Big' Deborah Gold Mine, Golden Square. Poppet head has been erected over the top of an earlier timber poppet head. In foreground, corrugated iron shed at base of poppet head legs, metal chimney on extreme LH side, adjoining a shed. Steam emanating from shed.bendigo, mining, deborah gold mine

Original owner Nora O’Connor the donor’s adopted aunt migrated to Canada during WW2 and also worked as volunteer at the Vancouver Mission to Seamen where she met her husband Edward O’Connor who later migrated to Australia.Newspaper clipping from the 'Vancouver Sun' dated Friday, March 31st 1950. Clipping shows an a black and white photograph of W. Wootton Mascall, treasurer; Rev. John W. Leighton, chaplain; president Captain G. Lancaster and Margaret Ross, head of the Lightkeepers Women's Auxiliary. They are tying bundles of magazines at the Vancouver Seamen's Institute.SAILOR'S KNOT is expertly tied on bundles of magazines at Vancouver Seamen's Institute by Margaret Ross, head of the Lightkeepers Women's Auxiliary, Missions to Seamen. Aiding her bundle up the reading matter are, from left: W. Wootton Mascall, treasurer; Rev. John W. Leighton, chaplain , and president Capt. G. Lancaster.vancouver, canada, lightkeepers' auxiliary, mission to seamen, nora o'connor, edward o'connor, british columbia, overseas missions

This item appears to be a World War One gas mask of the type known as the British small box respirator. Gas masks were produced and issued to members of the Allied defence forces in World War One in response to the German Army use of poison gas. The small box respirator was first issued in April 1916. This gas mask is of interest as a memento of World War One.This is a gas mask with a canvas hood for covering the face and with transparent mica eyepieces and cloth straps that fit around the head. A round perforated metal piece is attached to the bottom of the head piece and a hose is attached to the head piece and to an oval-shaped tin can. 757213 5613 (?) 18 world war one, history of warrnambool, gas mask

Bossing Mallet, wooden (Boxwood or lignum vatae) head conical shaped. Used by plumbers for forming lead sheet. Has a B carved in head.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bossing mallet, wooden bossing mallet, mallet

Horwood Collection. Shows from under Napoleon poppet head across to boiler. Markings: Just off Woodward Rd. Head of the shaft Napoleon.Kodakmine, gold, napolean, horwood collection. shows from under napoleon poppet head across to boiler.

Horwood Collection. Slide shows the remains of a 10 head wooden structure. Markings: Stan Horwood in foreground, 10 head crusher Kangaroo FlatKodakmine, gold, unknown mine., horwood collection. slide shows the remains of a 10 head wooden structure.

Mr. James Orr (1844-1885) was born in Ireland and was a minister at Brighton Congregational ChurchHead and shoulders, sepia toned head and shoulders studio cabinet card portrait of Mr. James Orr. He is at an angle to the camera and is not looking at the camera.On the front: "BRADWELL LATE Grenville ... ROYAL ARCADE MELBOURNE"james orr congregational minister, brighton congregational church

Inspected by archaeologist, Joanna Freslov on 2.6.2008. Stone tools were used for a variety of purposes, in ways similar to those of steel knives, axes, hammers and chisels. Ground-edge tools are made from fracture-resistant stone, such as basalt.This is able to withstand repeated impact, and and so was suitable for use in objects such as stone axes. The stone was quarried, and then roughly shaped into a tool blank with blows from a hammerstone. The edges were then sharpened and refined by grinding the tool against a coarse, gritty rock. The necessary tools and equipment for hunting, fishing and warfare were some of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This artefact is an exaample of the stone tools that Aboriginal people used.A dark stone handmade Aboriginal axe head.aboriginal axe-head stone-artefacts tool

Chisel cold chisel head badly burred.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Axe head Butterfly pattern or Bow-Tie.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, axe head

Colour photograph of a poppet head and tram in Bendigo.bendigo, shamrock hotel

Janet Anderson, seventh child of Robert Anderson. Studio Portrait of a young lass, frilled collar, broach at throat.Studio Head and Shoulders Photograph of Janet AndersonVandyk Studios, 3 Bourke Street, East Melbourne. Next door General Post Office.local history, photography, photographs, slides, film, janet anderson, sepia photograph, mrs emma anderson jacobs

One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPhotograph of Swan Lake with Helens Head in backgroundlocal history, photography, swan lake, black & white photograph, wet lands, helens head, john jenner, bryant west

The article refers to a grant of $5,000 fto the HGHHS for its "Signs of the Past Project" in the Grampians National Park.A newspaper cutting of an article headed "Signage Boost"media, newspaper articles, national park, signage

The tintype (or ferrotype or Melainotype) was produced on metallic sheet (not, actually, tin) instead of glass. The plate was coated with collodion and sensitized just before use. It was introduced by Adolphe Alexandre Martin in 1853. The most common size was about the same as the carte-de-visite, 5.5cm x 9.0cm, but both larger and smaller ferrotypes were made. The smallest were "Little Gem" tintypes, about the size of a postage-stamp, made simultaneously on a single plate in a camera with 12 or 16 lenses. They were often produced by travelling photographers, and were cheaper than Ambrotypes so made photography available to working classes, not just to the more well-to-do. The print would come out laterally reversed (as one sees oneself in a mirror). Being quite rugged, tintypes could be sent by post. Tintypes were eventually superseded by gelatin emulsion dry plates in the 1880s, though street photographers in various parts of the world continued with this process until the 1950s. (Above information abridged from http://www.rleggat.com/photohistory/history/tintype.htm) The firm of Gove and Allen opened in Sydney in 1880 and were responsible for the belated popularizing of the gem tintype in Australia. The firm traded as both The American Gem Studio and The American Studio. Others franchises were opened in Melbourne, Ballarat and Sandhurst (Bendigo). The Sandhurst branch closed in 1882 and Adelaide in 1884. All Gove and Allen studios had ceased trading by 1885. The studio addresses were: 23 King William St, Adelaide; 324 George St, Sydney; 95 Swanston St, Melbourne; Howard Place, Sandhurst; 7 Queen St, Brisbane; The card mounts used in Gove and Allen studios in Australia are identical to those used in America. They were initially made of plain white card with embossing around the oval image opening in the mount while some also had simple geometric and floral printed designs as well. Although Gove and Allen studios produced the majority of gem tintypes in Australia, other studios offered them including: - London, American & Sydney Photo Company, 328 George St, Sydney; - David Edelsten, 55 & 57 Bourke St, Melbourne; - Burman's Portrait Rooms, St. George's Hall, 209 Bourke St, Melbourne; - Bell's Gem Portrait Studio, 57 Bourke St East, Melbourne; - R. H. Kenny, Bridge St, Ballarat; - Marinus W. Bent, Sandhurst (Bendigo); - George Fisher, Victoria; - Anson Brothers, Hobart Town. (Abridged information from http://members.ozemail.com.au/~msafier/photos/tintypes.html) A tintype portrait of a woman's head, attached to a card.Printed lower left hand side of the card "American Studio, 324 Geo. St."tintype, american studio, woman, unidentified woman, women, photograph