.1 - Wall Calendar - 2007 - wire spiral bound along top edge, semi gloss paper, with cover and each month featuring various Yarra Trams employees and with tram and other photographs by employees. Names listed in key Associations. Has a hole in the top edge. Features trams 909 (100 years of electric trams), 5016, 210, 881, VR 53 and 40 at St Kilda, model trams at Kew Depot 75th, 2071, 3012, Power control room in 1938, City Circle car at Tram It, 2006. See Reg item 3017 for the photograph of VR53 donated by Ian Bryant. Two copies held. .2 - A4 photocopied sheet - "Yarra Tram Calendar Tram Photo Entry Form" for the calendar, giving entry conditions, closing date and address entries to be sent to. .3 - Pamphlet DL full colour advertising the calendar event and the prizes associated with the contest. See htd1171i2.pdf for full copy of calendar.trams, tramways, yarra trams, calendar, employees, drivers, 100 years of electric trams, st kilda railway station, victorian railways, kew depot, carlton control, tram 909, tram 5016, tram 210, tram 881, tram 53, tram 40, tram 2071, tram 3012

The artillery piece of the cannon was cast at the Low Moor foundry in England in 1861. It is a 68 pound muzzle loading cannon, capable of firing a 68 pound weight projectile. The arrow on the top of the barrel is the symbol of government ownership. It is probably one of the artillery pieces purchased by the Victorian government in response to the 1863 report by Captain Scratchley, which recommended 19 such artillery pieces be bought for the defence of Hobsons Bay, (Williamstown, Melbourne) (Billets p.12). It was possibly brought to Warrnambool in the late 1860s or the 1870s, to be used for training purposes by volunteers and local militia. The wrought iron runners were probably added to the slides at a later date. This model of carriage had been manufactured since 1855, and the traversing slide since 1860. The traversing slide of the wooden carriage absorbs the recoil when the gun is then returns to the gun to its original position for loading and re-firing. The properties of the timber (regarded as being Burmese teak) have helped to preserve these carriages in Australia. This particular carriage and traversing slide would have been manufactured about the same time as the gun (in 1861) in the Royal Carriage Department of the Royal Gun Factory in Woolwich, England. The gun would then have been assembled on the traversing slide of the carriage, then despatched as a unit. The wooden slide compressor mechanism that belongs to the cannon was used to limit the recoil when the cannon was fired. It is now stored separately for purposes of preservation. It is extremely rare, as it is the only one surviving in this group of South Western Victorian cannons.This 68 pdr cannon, mounted with its original wooden carriage, is part of the South Western Victoria collection of surviving 19th Century artillery pieces, item number W/F/02. It is rated as EXTREMELY RARE on a State, National and World level. The 68 pound smooth bore cannon of this period are not particularly rare either in Australia or overseas; its significance lies in its Victorian provenance and as an element in a major collection of 19th century cannon. The number of surviving carriages with traversing slides in this group in South Western Victoria is unique in Australia and probably in the World. Out of 10 such platforms surviving in Australia, the South Western Victorian group has half. Several survive around the world but probably not in such a large group. The wooden sliding compressor mechanism belonging to this cannon is extremely rare, and the only one in this South Western Victorian group of Guns and Cannons. As a whole, this cannon has undergone very little restoration or modification, giving it a high level of integrity.Warrnambool Garrison Cannon. 68pdr smoothbore, muzzle-loading, cast-iron cannon. Manufactured in Low Moor, 1861, No. 10310. Mounted on the wooden carriage with wrought iron traversing slide and wrought iron runners and fittings. The cannon's Cascabel is cast with a loop. The wooden slide Compressor Mechanism, or Recoil Mechanism, is extremely rare. This mechanism comprises two equal-sized sections of wood, one on each side of the centre, joined by metal rods. In the centre of this wooden platform, with openings, top and bottom is a 15cm diameter metal cylinder with two cusps on the edge of the top (this wood has split over time). Two parallel sides each have two 1cm thick metal "L' plates attached 15cm long and 8.5cm wide. With the unit is ‘ L’ bracket, curved bracket and bolt head.Cannon trunnion "LOW MOOR / 10310 / 1861" Top of the barrel "7045, (symbol of an arrow pointing up), 95 – 3 – 14, 1861, 209" Cascabel "CV / N / C" The rear of left-hand slide " "OD” “JW” “No 33” Side chock – “JW” twice. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, muzzle loading cannon, 68 pound cannon, low moor foundry, royal gun factory, warrnambool militia, warrnambool garrison volunteers, warrnambool fortifications, wooden sliding compression mechanism, carriage and traversing slide, 19th century cannon, traversing platform, garrison sliding carriage, 68 pounder

Document. Connelly, Tatchell & Dunlop - Legal Papers. 1 - 1886 - Letter from Gibbins Alice, Inglewood re Morrow. 2 - 1886 - Post Office Telegraph from Jones L J, Kerang re Hughes. 3 - 1886 - Post Office Telegraph from Irving Jas, Kerang. 4 - 1886 - Letter to Wood W Esqre, Town Clerk, Eaglehawk and return from Wood Wm. 5 - 1886 - Letter from Bennett & Co re Hawthorne & Brady. 6 - 1886 - Letter from Bennett & Co re Gibbins v Morrow. 7 - 1886 - Letter from Bennett & Co re Webb & Holmes & White. 8 - 1886 - Letter from Secretary for Mines and Water Supply re O'Neills application and water reserve at Axedale.cottage, miners, connelly, tatchell & dunlop, gibbins alice, jones l j, hughes, irving jas, wood w esqre, bennett & co, hawthorne, brady, gibbins, morrow, webb, holmes, white, mines and water supply, o'neill

Professor Arthur Barrington (Barry) Baker was the first Australian anaesthetist to gain a DPhil in anaesthesia. He completed his DPhil at Oxford University at the Nuffield Department of Anesthesia in 1971, titled, Physiological Responses to Artificial Ventilation. The Waveform Ventilator is the machine developed to illustrate his DPhil. The waveform ventilator was used in several scientific studies on 'the effects of varying inspiratory flow waveforms and time in intermittent positive pressure ventilation (IPPV)', published in the 'British Journal of Anaesthesia'. Professor Arthur Barrington Baker had an extensive career in research and clinical practice including holding the position as the Nuffield Professor of Anaesthetics at Sydney university (1992 - 2005) and also as the Dean of the Australian and New Zealand College of Anaesthetists (ANZCA) (1987-1990).The variable waveform ventilator is of national significance, due to its association with Professor Arthur Barrington Baker (Prof. Baker) the first Australian academic anaesthetist, and the representation of historical social themes and research and design, in anaesthesia. Historic significance – It is a rare type of ventilator in good condition and well provenanced. It is a tangible record of the beginning of the long established and distinguished career of Prof. Baker, the first anaesthetist in Australia to gain a DPhil. Prof Baker has a strong involvement in the Australian and New Zealand College of Anaesthetists (ANZCA) organisation. The object is a product of Prof Baker’s Doctorate of Philosophy (DPhil) on respiratory physiology and is associated with the prestigious Oxford University and the well-known Nuffield Department of Anaesthetics. It also represents the social theme of migration to England from Australia in the 1960s and 1970s to access and experience academic and artistic opportunities limited in Australia at the time. Scientific Value – The object is of scientific value as it offers major potential for education and interpretation in anaesthesia. Although ventilators are common equipment, this specific design and construct prototype is one of a kind, designed and used specifically for research purposes. A rectangular shaped object on a trolley with four wheels. The top half of the object consists of two panels, one of cream coloured painted wood, the other black plastic, both containing several dials of different shapes and sizes. The wood surface also contains several gauges and a safety pressure clear plastic box. The plastic surface also contains a pin board. The bottom half of the object consists of two shelves. The whole object's perimeter is lined with perforated metals. The top wooden surface has several metal pieces of equipment and a long tube. The rear of the object contains numerous types of tubing and wire, a gas cylinder and two leather straps with buckles. The bottom half of one side of the objects has 3 electrical power outlets.Waveform Generator, Drs Colliss N Cowie, Dr Baker Dr Murray Willson, Dr Babbington, Safety Pressure, Error POS F/B, Position, Feedback, Set Balance, Reset, Full Stroke, Velocity, Converter Current, line Pressure, Low Pressure, Bias Pressure, Start, Stop, Stop, Reset Press, Max Press, W/G Output, A/CRO B/2.baker, arthur barrington, baker, barry, professor, academic anaesthetist, oxford university, nuffield department of anaesthesia

Items found by Barry Maggs in the Whipstick National Park with a metal detector. A purple plastic display box with a clear plastic lid. it has ten compartments containing items made from metal, wood and ceramics. a: Five pieces of pipes made from clay wood and metal decoration. b: Clay pipe with a metal decoration. c: Four pieces of metal jewelry one to two centimeters in diameter Including a ring, a flower brooch, a pendant and a button. d: Metal button two in diameter with an inscription Warranted Superior and a coat of arms. e: Two metal badges both have ship's anchors on them, one is three centimeters round the other is five centimeters by four centimeters. g: small piece of jewelry made of metal and glass five centimeters long and two centimeters wide. h: Four pieces of hollow metal five to eight centimeters long and one centimeter diameter. i: A piece of hollow metal tube five centimeters long and one centimeter in diameter. It had a small piece of wood and some pieces of paper with printed text inside. j: a metal nail seven centimeters long and one centimeter diameter head. k: pottery, part of a gold crucible three centimeters high and three centimeters in diameter. barry maggs, whipstick national park, metal detection

Children used slates to practise writing letters and numbers. They sometimes used their slates to play games when not learning their lessons Early models of small, hand-held chalkboards were slates encased in a wood frame to keep the slate from breaking. Pencil and paper were available but paper was very expensive. Using a small, hand-held slate meant that a child could practise writing, erase and write again without having to consume expensive paper.This item is an example of early educational equipment and can be compared to modern school equipment.A double-sided rectangular-shaped school slate with a wooden frame.Chalk markings - number sentences. On frame-Made in Portugalschool-slate education writing educational-equipment

January 1961 Looking south Brown excavating Brougham to Dalton (present-day Withers Way) F. Woods Consolidating showing soft fill over culvert after 9 months Just south of Brougham Street. To the immediate left is the present-day car park for the Elham Leisure Centre. The house on the left is immediately opposite Cromwell street and adjacent to the southwest corner of the Leisure Centre buiding (where the Williams house sits hidden from view)Record of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.shire of eltham, infrastructure, 1961-01, cromwell street, eltham leisure centre, road construction, susan street

Born in 1883, Herb Medhurst was the eldest of David and Martha’s 8 children. He moved to Greensborough with the family at age 17. He was a good sportsman, playing cricket and excelling at wood chopping winning many ribbons at shows. He moved to Brunswick after his marriage in 1917 where he worked as a carter. He had many jobs and moved around Victoria finally settling in Brunswick. In this photograph neither the group nor individuals are identified.Digital copy of black and white studio photograph.herb medhurst

Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have probably been used on a farm or delivery wagon in the Warrnambool district. Horses played a vital role of the agricultural industry in Warrnambool before the mechanisation of farm machinery. This item is associated with that time.Hames - Harness pieces (2) black metal with hooks, rings & chain. Wattle stamped.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

219 NQR - Open medium trucks with seats & canopy (28) VR Service History Puffing Billy Service History or Notes In the 1910s some NQRs were provided with removable wood and steel framework with canvas canopies and side curtains, and seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy recreated one of these and has built five more similarly equipped NQRs, numbered 219-223, between 1990 and 1992.Historic - Puffing Billy railway - Narrow Gauge Rolling Stock - NQR Open Medium Truck with seats & canopy219 NQR - Open medium trucks with seats & canopy made of Steel and metal219 NQR puffing billy, pbr, rolling stock , 219 nqr

220 NQR - Open medium truck with seats & canopy VR Service History Puffing Billy Service History or Notes In the 1910s some NQRs were provided with removable wood and steel framework with canvas canopies and side curtains, and seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy recreated one of these and has built five more similarly equipped NQRs, numbered 219-223, between 1990 and 1992. Historic - Puffing Billy railway - Narrow Gauge Rolling Stock - NQR Open Medium Truck with seats & canopyOpen medium truck converted to passenger carrying by the addition of seats & canopy 220 NQRpuffing billy railway, pbr, rolling stock , 220 nqr, nqr open medium truck with seats & canopy

222 NQR - Open medium truck with seats & canopy VR Service History Puffing Billy Service History or Notes In the 1910s some NQRs were provided with removable wood and steel framework with canvas canopies and side curtains, and seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy recreated one of these and has built five more similarly equipped NQRs, numbered 219-223, between 1990 and 1992.Historic - Puffing Billy railway - Narrow Gauge Rolling Stock - NQR Open Medium Truck with seats & canopy222 NQR - Open medium truck with seats & canopy made of steel and metal222 NQR puffing billy railway, pbr, rolling stock , 222 nqr, open medium truck with seats & canopy

223 NQR - Open medium truck with seats & canopy Puffing Billy Service History or Notes In the 1910s some NQRs were provided with removable wood and steel framework with canvas canopies and side curtains, and seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy recreated one of these and has built five more similarly equipped NQRs, numbered 219-223, between 1990 and 1992. Nov 2016 - Upholstery fitted Historic - Puffing Billy railway - Narrow Gauge Rolling Stock - NQR Open Medium Truck with seats & canopy223 NQR - Open medium truck with seats & canopy made of steel and metal223 NQRpuffing billy railway, pbr, rolling stock , 223 nqr, nqr open medium truck with seats & canopy

First hand account by Arthur Woodley of his time with Melbourne Legacy as a Junior Legatee and its influence on his life. He was a boy that stayed at the children's home, Holmbush in the 1940s. It has a foreword written by Legatee F H Wood who was involved with the residences committee. The introduction says the purpose of the following story, written in plain simple terms, is to put on record for Legacy, the life, times, achievements, and experiences of just one grateful Junior Legatee.An authentic description of what it was like to be a Junior Legatee in a Melbourne Legacy residence, exemplifying the work of Melbourne Legacy in the 1940s.White A4 with black type x 26 pages and an A5 handwritten memo on Melbourne Legacy letterhead.JL 13, Box 10, Arthur Woodley Author, Nov 1990residences, junior legatee, holmbush, arthur woodley

The remarkable story when 74 soldiers fought in vain to save the lives of their mates off Portsea as 3 soldiers died. Tragically, Privates Roger Wood and Edward Meyer, and Warrant Officer George "Taffy" Drakopoulos, died. Please Note: "The Rip" is also known as "The Heads", which is a dangerous stretch of water connecting Port Phillip Bay and Bass Strait. This is the only entrance for all shipping into Port Phillip Bay and to and from the Port of Melbourne, Victoria, Australia.Kayak of a similar type as those used during the ill-fated army exercise with loss of life in the rip.rip disaster, commandos, kayak, military history - army

Ceramic hot water bottles were common in the 19th and early 20th centuries. As well as filling hot water containers to warm your bed, you could buy earthenware bottles to use as foot warmers or hand warmers too. Earlier foot warmers used to hold hot coals, or glowing wood, not warm water. In the same way, traditional bed warmers filled with embers were once more usual than hot water bottles.Ceramic foot warmer glazed in cream with a decoration of lattice and pink roses.Maker stamp on base: "The Mecca Foot Warmer / Made in finest English Ivory Ware / Reg. No. 571373 / No sharp corners / Warming Pan / Stone-Trent Englandfoot warmer, household item, bedroom item

An Adze is versatile cutting tool similar to an axe but with the sharp cutting edge perpendicular to the handle rather than parallel. The wooden handle of this adze is shaped like an axe handle and the blade also has a slight curve. They are used for smoothing or carving wood such as sleepers An adz, with its long handle, cuts with the grain, and the nature of the chips is different from an axe. While they have a similar shape, they should never be confused with a hoe used or mattock for agriculture and horticulture.Carpenter's adze or cutting adze The tapered eye in the adze and tapered handle end forces the head to tighten when swung; but enables removal of the head for sharpeningtimber tools

Exhibited by the artist at the Wood, Wine & Roses Festival, Heywood, 2004.Aunty Betty King was a Kerrup Jmara Elder from Portland. She was the great grand-daughter of King Billy of Yigar. Aunty Betty cared deeply about Nyamat Mirring and Country. A staunch activist and long-time advisor to the Friends of the Earth, Aunty Betty King and Sandra Onus worked together to fight against the logging of native forest in the Cobboboonnee taking part in protests and meetings.Acrylic paint on canvas depicting birds and fish, water lilies and other vegetation, and stylised designs associated with early settlement of Aboriginal people in the Portland/Glenelg wetland area. Black painted border with white dot pathways, a circle of white dots in each of the four corners. Centre area in blues and greens featuring two birds, painted in black with red and ochre bandings.Front: nilgunditjmara, first nations, nyamat mirring, glenelg shire cultural collection, portland, female artist, female artists, heywood

Black and white photograph, mounted on grey cardboard, showing 4 sculls of different classes grouped together on Lake Moodemere to pose for the photograph. A few of the oarsmen are identified on the back of the mount.On back of mount: "Crews Lake Moodemere | Eight Oared. Cox ____, Stroke ____, 7 Seat A N Jackson, 6 _____, 5 _____, 4 A W Chambers, 3 _____, 2 _____, Bow _____ | Gig 4 oar. Cox _____, Stroke _____, 3 _____, 2 _____, Bow _____ | Outrigger 4 Oar. Cox _____, Stroke Jim Woods, 3 _____, 2 _____, Bow _____ | Pair Oar. Cox _____, Stroke _____, Bow Buckingham."rowing, lake moodemere, sculls

Nicholas Caire was born on Guernsey in the Channel Islands in 1837. He arrived in Adelaide with his parents in about 1860. In 1867, following photographic journeys in Gippsland, he opened a studio in Adelaide. From 1870 to 1876 he lived and worked in Talbot in Central Victoria. In 1876 he purchased T. F. Chuck's studios in the Royal Arcade Melbourne. In 1885, following the introduction of dry plate photography, he began a series of landscape series, which were commercially successful. As a photographer, he travelled extensively through Victoria, photographing places few of his contemporaries had previously seen. He died in 1918. Reference: Jack Cato, 'Caire, Nicholas John (1837–1918)', Australian Dictionary of Biography.An original, rare photograph from the series 'Views of Victoria: General Series' by the photographer, Nicholas Caire (1837-1918). The series of 60 photographs that comprise the series was issued c. 1876 and reinforced a neo-Romantic view of the Australian landscape to which a growing nationalist movement would respond. Nicholas Caire was active as a photographer in Australia from 1858 until his death in 1918. His vision of the Australian bush and pioneer life had a counterpart in the works of Henry Lawson and other nationalist poets, authors and painters.Views of Victoria (General Series) No.28 / ‘Scene near Dandenong, Moon’s Range’ / Albumen silver photograph mounted on boardOn Reverse: 'Moon’s Range is situated to the right of the portion of the Dandenong Range of Mountains called “Fern Tree Gully.” This Range is notable for its almost impenetrable forest of trees, the majority of them being of gigantic growth. Numerous splitters and wood-cutters obtain lucrative employment in the production of laths and firewood. Near the summit of the range are several summer residences belonging to Melbourne merchants.’nicholas caire (1837-1918), australia - landscape photography

This clock was made by Charles Frederick Falck who was a watchmaker and jeweller in Beechworth from 1863-1908. Falck was born in Körlin, Prussia on May 22nd in 1833 and died at the age of 75 in 1908. Ovens and Murray Advertiser, Beechworth: edition June 13, 1908 OBITUARY: Falck was brought up to the business of watch-making, in which he developed exceptional mechanical ingenuity. Attracted by the favourable prospects held out by the Australian discoveries of gold he, like many other young adventurous spirits, left his native land to seek his fortune in the great southern Eldorado, arriving in Adelaide in 1854, and shortly after came to Melbourne where he worked as a journeyman, and subsequently started in business on his own account. Feeling inclined to test his fortune on the goldfields, he went to Blackwood but, meeting with little success, he returned to Melbourne where he was married. In 1862, he moved to Beechworth, where he commenced business as watchmaker and gold-buyer. He then embarked in vine-growing on the Sydney road, but eventually resumed his business avocations. His skill in practical horology was evinced in a clock of his own design and manufacture, surmounted by a golden eagle, which was exhibited at the first Melbourne Exhibition in 1856, and which afterwards formed a pre-eminent attraction in the window of his business premises in Ford Street. For many years, he filled the position of timekeeper to the Beechworth Racing Club, with complete satisfaction also at various sports meetings. He leaves a family of six sons and one daughter (Mrs. Jas. Broadfoot) all arrived at maturity. The funeral, which was well attended by a number of residents, took place at the Beechworth Cemetery on Sunday, the burial service being performed by the Ven. Archdeacon Potter. The cortege was capably supervised by Mr. D. Wilson, undertaker. The clock was returned to Beechworth in 2020 through the generous support of the Copland Foundation. Given that Mr. C. F. Falck traded as a watchmaker and jeweller in Beechworth for 45 years and traded with the 1855 clock mounted in his front window, there is a direct link between the clocks and the social, cultural and economic life of nineteenth century Beechworth at time when the town was developing and expanding in response to gold mining. This clock represent the significant skill and expertise of Charles Falck as an horologist. Medium-sized pendulum clock featuring a carved gilt wood eagle with wings outstretch (épandre - expanded with wing-tips directed upwards) and perched above a pendulum rod that holds a silver dial clock face within a reeded sunburst surround. The clock has an eight-day fuse movement with dead beat escapement wound from the clock face. C. F. F. FALCK / EXHIBITION 1856 / MELBOURNEburke museum, copland foundation, beechworth, leonard joel, auction, purchase, clock, pendulum, eagle, eagle clock, charles frederick falck, c. f. falck, falck, horology, pendulum clock, melbourne

Sewing machine, Singer, hand operated by crank handle, rounded wood case with lock on one side. Machine has hinges at back and recessed accessory compartment containing pins and needles. Machine has shuttle bobbin. Singer Trade Marks gold transfers on lid and machine, with Singer badge on front of machine. Serial Number "F1841984" on front right. Serial Number "F1841984" on front rightflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sewing machine, singer, singer sewing machine, dressmaker, taylor, domestic machines

Robert George Lunn VX76842 enlisted on 27.2.1942 age 35 years, 5.3 1942 transfer to Engineer Training Echuca, 12.4.1942 transfer to 2nd Field Sqd, 27.6.1942 transfer to No 4 Bomb Disposal Coy, 3.9.1942 transfer to No 2 Bomb Disposal Coy, 18.2.1943 transfer to Engineer Training Centre RAE, 18.8.1943 transfer to 5th Aust Advance Reinforcements Depot Townsville, 11.11.1943 embark for Pt Moresby, 19.11.1943 taken on strength 2/9th Field Coy, 4.6.1944 embark from Lae to Brisbane, 11.8.1944 hospital with Malaria28.8.1944 rejoin unit, 20.9.1944 hospital (unclear), 27.9.1944 rejoin unit, 23.5.1945 embark for Morotai, 7.8.1945 promoted to Cpl, 12.8.1945 fly from Balikpapan to Aust to attend a Junior leaders school Aust Army, 22.8.1945 arrive Vic and attend school, 29.8.1945 attend RAE Training Centre NSW, 31.10.1945 Move to Vic for discharge, 7.11.1945 discharged from the 2nd AIF.Wood framed item with photo, ID tags, medals x 4, RAS badge, RSL badge, all items are set in panels within the frame, panel with text at bottom. Medals. 1. 1939 - 45 Star. 2. Pacific Star. 3. British War medal 1939 - 45. 4. Australian Service Medal 1939 - 45."VX76842 Lance Corporal Robert George Lunn, 2/9 Australian Field Company Australian Imperial Force, 27 February 1942 - 7 November 1945"framed, memorabilia, ww2, medals, lunn

Names of airmen are: “CHAMPKIN D G, CARROLL M W, LYNCH T J, JARMAN E G D, HARRIS H R, JACKSON J G NEAL R L”Black / white drawing of a Lancaster air crew. Each is wearing his flying gear, each has a last name drawn on front of helmet. An Avro Lancaster Bomber is at the top part of drawing. Winged badges bearing pilot's full names are at bottom part of drawing. Frame is simple wood design, painted white with a small amount of gold trim.illustrations-pen&ink, military history - air force, airforce, lancaster

Trench art was typically made by soldiers from pieces of shell and shrapnel, which would have been collected and refashioned into many different objects ,some being of a functional type such as containers and holders while others such as this are more decorative. The maker of this art piece was Stanley Morgan 6383 who was born at Mepunga which is East of Warrnambool.This item has significance being a typical example of trench art which has survived over 100 years. Being linked to one of the largest conflicts in which Australia has engaged it has strong historical significance.This model is constructed of metal and wood. It has a propeller mount on either side of the cockpit with propellers front and back. It has two German crosses on the back and one on either wing.The body of the plane rests on four wheels which sit under the wings with two smaller wheels at the front.There is a gold coloured plaque mounted at the front. It stands on a modern wooden mount,On small plaque at front of mount,”Crafted by Trumpeter Stan Morgan France WW1. On the base of the mount on a small sticker,”Mr Lloyd Morgan 19 Mountfield Ave Malvern East Vic 3145warrnambool, trench art, stanley morgan 6383, morgan mepunga

Yokes like this one were key components used to control bullock teams. These teams were very important in Australia during the 19th century, hauling heavy loaded wagons of goods to remote settlements and rural produce to cities and ports over rough unmade roads. The bullocks were yoked together in pairs. Chains joined the yoked pairs. A heavy wooden bullock yoke with only one metal collar. One is missing. The fittings are iron. There is a small leather patch tacked on to one end. The yoke is made from a length of wood of roughly rectangular cross-section. It has been shaped to form curved depressions that allow it to rest across the necks of two bullocks and yoke them together. bullock-yokes transport