Showing 8510 items
matching wood
-
Tatura Irrigation & Wartime Camps Museum
Functional object - Button, Wooden Buttons, 1940's
Made by internees at Camp 3, Tatura. These buttons had to be removed each time the garment was washed.Pair of small polished/turned wooden shank buttons. Grain of wood distinctivebutton, wood, dostser, frank r, baumert m, camp 3, tatura, ww2 camp 3, costume, accessory, clothes -
Whitehorse Historical Society Inc.
Document, 55 choice building blocks, 1935
Copy of advertisement for auction of land in Francis Street Blackburn and Whitehorse Road on Saturday 2 November 1935.Copy of advertisement for auction of land in Francis Street Blackburn and Whitehorse Road on Saturday 2 November 1935. F. G. Wood & Co, Auctioneer. Local Agent: G. C. KarnaghanCopy of advertisement for auction of land in Francis Street Blackburn and Whitehorse Road on Saturday 2 November 1935. whitehorse road, blackburn, francis street blackburn, g. c. karnaghan, f. g. woods & co. -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Buildings, Shingles Original Cottage c1850, c1850
The original small, pioneer cottage was built in the late 1840s to early1850s, by an unknown pioneer. It was located on part of a 30 Acre allotment that was originally part of Henry Dendy’s 'Special Survey Brighton' granted in 1841 (5120acres). There is a small display of external cladding shingles from the original pioneer cottage. Wooden shingles were usually thin (3⁄8 to 3⁄4 in or 10 to 19 mm), relatively narrow (3 to 8 in or 76 to 203 mm), of varying length (14 to 36 in or 360 to 910 mm), and almost always planed smooth. The traditional method for making wooden shingles was to rive - hand split - them from straight-grained knot-free sections of logs pre-cut to the desired length known as bolts. These bolts were quartered or split into wedges. A mallet and axe were used to split out thin pieces of wood. The wood species varied according to available local woods, but only the more durable inner section of the log was usually used. The softer sapwood generally was not used because it deteriorated quickly. Because hand-split shingles were somewhat irregular along the split surface, it was necessary to dress or plane the shingles to make them fit evenly on the roof. This reworking was necessary to provide a tight-fitting roof over typically open shingle lath or sheathing boards. These are the original shingles found on Box Cottage by L Lewis 1970 and used in the reconstruction in 19843 x wood Shingles used on roof of Box Cottage c 1850box cottage museum ormond, henry dendy special survey brighton 1841, brighton, moorabbin shire, parish of moorabbin, county of bourke,cottages, pioneers, ormond, colonial, mckinnon, dendy henry, box william, box elizabeth, reitman william, convicts, lewis timber co. ltd., deam h, museums, box alonzo, smith a, -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tool - Tenon Saw 20thC, 20thC
This small fine-toothed saw with a strong back, used especially for cutting tenons on hard and soft woods, usually a Tenon saw will have between 10 and 14 teeth per 2.5cm (inch), this allows more control over the depth and direction of the cut. Among the early settlers in Moorabbin Shire were blacksmiths who made tools for the other settlers who were establishing the homes, market gardens, farms, orchards and various businesses. Early settlers were self reliant and repaired their own equipment for kitchen,dairy, farm, horses, carts using various tools . This tenon saw is typical of the type used by early settlers in Moorabbin Shire 20th CA small fine-toothed steel saw with a strong back and wood handle, used esp for cutting tenons - fitted pieces of wood to insert into a cavity.saws, tenon saws, early settlers, market gardeners, blacksmiths, tools, building equipment, hammers, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd, -
Flagstaff Hill Maritime Museum and Village
Domestic object - Bread Board
In the high tech, fast paced society that we live in, it’s easy to take some things for granted. Case in point: the wood cutting board on which you’ll probably be preparing the evening’s dinner. Have you ever taken the time to think about the history of the cutting board? Where did it come from, and what did ancient civilizations use to cut their meats, fruits and vegetables? Wood throughout the ages Since the dawn of time, wood has been one of the most available materials used by mankind to build tools and lodgings, so it’s not really surprising to know that wood has been used in the preparation of food since the prehistoric ages. Of course, back then, cavemen probably used an unpolished slab of tree trunk to cut the kill of the day on and they probably didn’t think twice about saving it once the meal was over. Chances are they probably threw it in the fire with the rest of the wood needed to kindle it. Advances in technology Throughout the centuries, mankind evolved and started creating machines from steam, electricity and metal. When the circular saw was invented, nicer, cleaner slabs of wood were cut and used as cutting boards. Since soft wood was the most available type of wood at the time, it was the material of choice for to be used for cutting boards. Boards were made smaller since the slab of wood could now be cut to any desired size. Since they were made smaller, they were also used to eat off of and some people referred to them as trenchers. Trenchers were originally pieces of stale hard bread that were used as substitute plates. Wood trenchers quickly became the replacements of the eatable dinnerware. The butcher block: the cutting board’s larger cousin In the industrial ages, many industries rapidly developed, and the butchery industry followed this trend as well. Before the invention of the cutting board, butchers used tree rounds to carve their meat on. The rounds were often too soft and they rapidly became unsanitary. Hard maple wood butcher blocks were the preferred choice of the industry. They were made to be extremely thick and durable, so durable in fact, that a butcher could use the same block for almost his entire career. Cutting boards around the world As cutting boards began to be more and more used in kitchens around North America, the rest of the world crafted such boards from different materials. The East used thick bamboo as their material of choice. Despite its frail appearance, bamboo is quite strong and made durable cutting boards and butcher blocks. Europe used maple in the crafting of their cutting boards while Persia used flat pieces of polished wood in their kitchens. The world then saw cutting boards that were being made from other materials like plastic and they came in all shapes and sizes, but they always served the same purpose, to provide a household with a safe, clean surface on which to prepare meals for their friends and family members. https://www.woodcuttingboards.com/news/quick-history-of-the-cutting-board-47.aspxThe bread board is an example of kitchen equipment used during Victorian times and similar to those used today.Bread board. Wooden, octagonal, plain sanded light wood. Has decoration around edge and indented circular line to delineate round cutting board section.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bread board, cutting board, pastry board, kitchen utensil, kitchen equipment, baking equipment, food preparation -
Wodonga & District Historical Society Inc
Tool - Haeusler Collection Carpenter Work Ruler
The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This ruler belonged to Louis Haeusler (b.1878) and is one of the many objects in the Haeusler Collection that represent home and farm life in early twentieth century Wodonga.This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. It contributes to our understanding of domestic and family life in early twentieth century Wodonga, as well as providing interpretative capacity for themes including local history and social history.Wooden fold out carpenter ruler with bendable brass hinges and imperial measurements engraved into the wood. Imperial measurements (inches) engraved on arms of ruler. carpentry, carpenter, woodwork, wood, ruler, building, diy, wodonga, farm, haeusler collection -
Hamilton Pastoral Museum
mouse trap, 1870-1900
possibly made by an early Lutheran settler who farmed in these districts. there is another one that exists in the private Burger museum at Penshurst Vichome made mouse trap of two large blocks of wood suspended vertically by trip lever arrangement connected by strings and chocked up by wooden pegs when set up as a trapwood, trap, german, mouse trap, vermin control, lutheran -
Phillip Island and District Historical Society Inc.
Print, At Cowes, Phillip Island
Very early scene of Cowes showing the jetty, Isle of Wight Hotel and jetty shed. Charles Turner was an English mezzotint engraver and draughtsman who specialized in portraiture. HistoricalA4 colour photocopy of a print of a wood engraving by Charles Turner of the Cowes jetty. Large beige frame around print.At Cowes, Phillip Island. from the commemorative work, Victoria in 1880, published in Melbourne to mark the International Exhibition held that year. Fine prints of notable buildings and street scenes, as well as views of the country and suburban areas of the colony. Wood engraving.cowes jetty, charles turner, isle of wight hotel, jetty shed, wood engraving -
The Ed Muirhead Physics Museum
Capacitor Bridge H.W. Sullivan
Wood cut and dove tailed, screwed and adhered; plastic moulded, screwed and adhered. Metals cast, forged, machine cut, screwed and adhered. Wood coated (painted varnish). Inscribed on upper face along right edge: H.W. SULLIVAN/LONDON; painted on upper face along front edge: UNIT 10-9 F; painted on front face: PART III and “F” carved into the wood below “Part III”; [Stamped] upper face along left edge: NAT.PHIL.LAB./NO 55/UNIV. OF MELB; adhered label on left side face: PA 4. -
Churchill Island Heritage Farm
Tool - wedge
An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Used by the donor in clearing timber at Olinda and Shady Creek, Victoria. Forms part of a timber clearing tool collection including cross cut saws and Trewhella jack.wood cutting/splitting wedge. Steel. commercially made. Has relief groove.TROJAN [stamped on side]timber cutting;, timber splitting, olinda, shady creek, churchill island heritage farm, wilfred dungan collection -
Churchill Island Heritage Farm
Tool - wedge
An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.wood splitting wedge; commercially made; steel; surface rust; with relief groovetimber splitting, churchill island heritage farm, olinda, shady creek -
Churchill Island Heritage Farm
Tool - wedge
An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.wood splitting wedge; commercially made; steel; relief groove; surface rusttimber splitting, churchill island heritage farm, olinda, shady creek, wilfred dungan collection -
Melbourne Legacy
Photograph, Operation Firewood, 1987
A photo of Operation Firewood which provided help to widows by supplying and stacking firewood for the winter. Photo shows a truck being loaded with wood in May 1987. From a black and white photo (00765) taken that day the men standing on the truck are Legatee Ken Markey from Cobram/Yarrawonga and Legatee Jack Gunn from Melbourne. From the 1987 Annual Report this photo is captioned "Cobram/Yarrawonga Legatees organised and loaded 450 tonnes of firewood which was transported to Melbourne in trucks donated by ten generous firms and delivered to 154 needy widows under the supervision of local Melbourne Legatees." Legacy provided this service for many years, with the help of Linfox who provided the trucks. In the June 1995 edition of The Answer Melbourne Legacy thanked the Cobram/Yarrawonga Group for their help in supplying and cutting the wood. In 1996 it was announced the scheme had ended.A record of Legacy helping widows by supplying and stacking firewood. When open fires were the main source of heating, a load of firewood and help moving it, would have been very important to the widows.Colour photo of Legatees Ken Markey and Jack Gunn with a truck of wood for Operation Firewood.Handwritten on back: "Operation Firewood / Cobram, May 1987"operation firewood, widows -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Education kit - Wood shaft writing pens and nibs, Steel Nib Manufacturer, mid 20thC
A dip pen usually consists of a metal nib with capillary channels like those of fountain pen nibs, mounted in a handle or holder, often made of wood. Dip pens have no ink reservoir, so the user must recharge the ink from an ink bowl or bottle to continue drawing or writing. Dip pens emerged in the early 19th century, when they replaced quill pens and were generally used before the development of fountain pens in the later 19th centuryThe pioneer settlers in the Moorabbin Shire area valued education and established schools for their children in Cheltenham and East Brighton c1860's These wood shaft pens and steel nibs are typical of the type used up to the mid 20th Century in school classes.3 wood shaft writing dip pens with steel nibs schools, education, writing equipment, victoria melbourne, market gardeners, pioneer, settlers, cheltenham state school no. 84., bentleigh east state school no. 2083, st stephens c of e school tucker road east brighton, pen steel nibs -
Bacchus Marsh & District Historical Society
Decorative object, Wooden bowl made from Osage Orange tree timber
This small bowl was won by Alex Todd for marksmanship at the Holy Trinity Anglican Church Bazaar in Bacchus Marsh in 1935. It was described in the Bacchus Marsh Express newspaper as a piece of Local Objet d'Art. The Express noted that it was 'made and donated to the Ladies' Guild by Mr. Walter Simon, of Bacchus Marsh. A local osage orange tree furnished the wood for the bowl, which was one of many articles that Mr. Simon's lathe has shaped from time to time, the grain of the osage timber being especially suitable for such work', Express, 25 May, 1935, p.2. A small polished wood bowl with unattached wooden lid. woodworking -
8th/13th Victorian Mounted Rifles Regimental Collection
Photograph - Hamel Wood
Training exercise codename "Hamel Wood" was conducted at Puckapunyal to teach infantry and armoured soldiers techniques for cooperative action.Infantry on board an M113 APC of VMR Squadron 4/19 Prince of Wales Light Horse during Exercise " Hamel Wood ", Puckapunyal 24 August - 8 Sept. 1991.military -, vmr, apc, puckapunyal, exercise -
Tatura Irrigation & Wartime Camps Museum
Plane - Wooden, 1940's
Made by internee at Camp 3 Tatura. Used there as a wood working handtoolHandmade varnished, polished wooden plane with curved, turned handle. Metal washers support centre metal barHaeringplane, wood, haering, m, camp 3, tatura, ww2 camp 3, trades, tools -
Marysville & District Historical Society
Postcard (item) - Black and white postcard, Valentine Publishing Co. Pty. Ltd, Entrance to Marysville V.11, 1923-1963
A digital copy of an early black and white photograph of the Marysville-Wood's Point Road at the corner with Murchison Street in Marysville in Victoria.A digital copy of an early black and white photograph of the Marysville-Wood's Point Road at the corner with Murchison Street in Marysville in Victoria. This postcard was published by the Valentine Publishing Co. Pty. Ltd. as a souvenir of Marysville.marysville, victoria, postcard, valentine publishing co, souvenir, murchison street, marysville-wood's point road -
Orbost & District Historical Society
black and white photograph
This is possibly a wedding photograph related to an Orbost family.A black / white photograph, on a grey buff card, showing a large group of people, probably a wedding party, outside a brick church in Bega, New South Wales.on front at bottom - "Wood - Bega"photograph-church-bega -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Harold F B Wheeler, Cassells Book of knowledge
Library of Knowledge on every subject,illustrated by a wealth of pictures never before attempted.F C Wooding (stamp)literature -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Harold F B Wheeler, Cassells Book of Knowledge
Library of knowledge on every subject, illustrated by a wealth of picture never before attemptedF C Wooding (Stamp)literature -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Harold F B Wheeler, Cassells Book of knowledge
Library of knowledge on every subject, illustrated by a wealth of pictures never before attemptedF C Wooding (stamp)literature -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Harold F B Wheeler, Cassells Book of Knowledge
Library of knowledge on every subject, illustrated by a wealth of pictures never before attemptedF C Wooding (stamp)literature -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Cassells Book of Knowledge
Library of knowledge on every subject, illustrated by a wealth of pictures never before attemptedF C Wooding (stamp)literature -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Harold F B Wheeler, Cassells Book of Knowledge
Library of knowledge on every subject, illustrated by a wealth of pictures never attempted beforeF C Wooding (stamp)literature -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Harold F B Wheeler, Cassells Book of Knowledge
Library of knowledge on every subject, illustrated with a wealth of pictures never before attemptedF C Wooding (stamp)literature -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Book, Harold F B Wheeler, Gippsland Sketchbook
Library of knowledge on every subject, illustrated by a wealth of pictures never attempted beforeF C Wooding (stamp)literature -
Queenscliffe Maritime Museum
Craft - Catamaran, Ray Goodwin from a design by CH & LN Cunningham
Around the 60s and 70s the most popular catamaran sailing on Port Phillip was the Cunningham designed Quickcat. Popular marine ply catamarans mostly owner built and used extensively in Port PhillipQuick Cat 16 foot, timber catamaran with trailer, beach buggy and construction blueprint Y Wood Ya, RGYCquick cat, catamaran, marine ply cats -
Wangaratta RSL Sub Branch
Souvenir - Wooden artefacts
Wooden artefacts from the Sepik River region in Papua New Guinea. Different tribes living along the river produce magnificent wood carvings, clay pottery and other art and craft. Kundu is the Papuan general name used for drum. It is an hour glass shaped drum made of wood with a snake's skin as membrane. A handle is placed on the narrowest part of the drum. Often, the kundu is decorated with animal figures on its edges. - donated by John Nelson TAYLOR QX25010,2900269,3108420 who served in the AIF 19/1/1941 to 7/12/1945 - Regular Army Special Reserve 30/1/1952 to 29/1/1955 and the CMF 1/8/1959 to 2/1/1960. Rank on final discharge - Trooper 8/13 Victorian Mounted Rifles. John was deployed overseas to New Guinea from 17/10/1943 to 23/2/1945 and 5/5/1945 to 26/10/1945 and served in Korea and Japan from 5/3/1953 to 6/4/1954. A member of the Wangaratta RSL he passed away in January, 2021.Wooden artefacts from the Sepik River region in Papua New Guinea. The Sepik area is well known for its sculpture masks shields and other artifacts. Many tribes use drums in rituals. Two decorative wooden face masks, one wooden Drum and one wooden Crocodilepapua new guinea, artefacts, wood, ww2 -
Tatura Irrigation & Wartime Camps Museum
Shovel - hearth, Karl Wied, 1940's
Hand made hearth shovel made in Camp 3. Blade and sides of heavy duty galvanized iron. Handle and back made of wood. Iron nailed to wooden backing.shovel, hearth, wood, galvanized iron, karl wied, camp 3, internee