A rare collared tennis racquet with solid concave throat, fine-grooved rounded handle, small racquet head, fully leather end wrap and butt cover, and of course, a ribbon collar around shaft. Materials: Wood, Lacquer, Glue, Metal, Gut, Leather, Ribbontennis

A Bailey's 'Young America' tennis racquet with solid concave throat, leather collar around shaft and plain rounded handle. Name of model features across crown on obverse, and manufacturer's details across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Gut, Leathertennis

An extreme tilt-top real tennis racquet, with solid convex throat, leather collar around shaft, and leather handle grip. Throat on both faces features impressed trademark of an elephant above three crowns. Materials: Wood, Lacquer, Glue, Metal, Gut, Leathertennis

An unstrung Horace Partridge & Co. tennis racquet, with solid convex throat, and cross-hatched handle. Decal of manufacturer's name, accompanied by a human figure holding up an oversized tennis racquet, features across throat on obverse. Materials: Wood, Lacquer, Glue, Metal, Inktennis

'Paddle Tennis' set in red box with a lid label featuring image of game played on street before a crowd. Contains two solid wood paddles a string net and two rubber balls. Materials: Cardboard, Ink, Wood, Metal, Natural fibre, Felt, Bonetennis

Notes give history of the SEC's operation of the tramway, the reconditioning, their condition, lack of capital expenditure, rolling stock and track age, possible abandonment, but finally, we must solider on. Appears to have been written for staff and explain the lack of capital expenditure on the system, but we must continue to run a safe and reliable system.Yields a information about the history of the SEC in Bendigo. Almost apologetic in its tone in not spending enough money on the tramway system. Gives notes about the overall engineering status of the system.Typed statements (1 to 11) on two foolscap sheets, carbon copy, titled "Bendigo Tramway Service - Notes" about the Bendigo Tramways, the SEC's position and status. Dated 27-7-1959, with initials ACS.VMcC in top right hand corner. In top right hand corner in black ink "BTPS 405"trams, tramways, bendigo, sec, maintenance, reports

MMTB bus No. 16, Thornycroft J chassis, body by James Motors. For details of the chassis see MMTB Drawing R1912, Has the driver, an Inspector and Conductor standing alongside the bus on the Melbourne to Elsternwick via High Street route. Note the solid tyres and the small windscreen providing some limited protection to the driver. Yields information about the second MMTB Thorncroft buses.Black and white photograph of the MMTB No. 16 with an Inspector and crew. Smaller print held as well.tramways, buses, mmtb, thornycroft, crews, inspectors

Cross country boots are no longer attached to the ski by three holes hooked onto 3 'nails'. Very dark brown solid leather boots with 3 steel loops each side on the lower and 2 steel hooks on the upper section of the opening. The tongue is high and padded. The laces are thick and yellow. The sole is a thick rubber with 3 toe holes (to attach to skis) at the front end.Outer side: embossed 'V'. Inside tongue: 'Vasque / Boots'. Bottom of sole: 'Vibram / 'Made in Italy'cross country boots, skiing boots, falls creek, snow, cross country skiing

Glass bottles and glass jars are in many households around the world. The first glass bottles were produced in south-east Asia around 100 B.C. and the Roman Empire around 1 AD. America's glass bottle and glass jar industry were born in the early 1600s when settlers in Jamestown built the first glass-melting furnace. The invention of the automatic glass bottle blowing machine in 1880 industrialized the process of making bottles. In 2019, plans were made to re-introduce milk glass bottle deliveries to Auckland in early 2020 The earliest bottles or vessels were made by ancient man. Ingredients were melted to make glass and then clay forms were dipped into the molten liquid. When the glass cooled off, the clay was chipped out of the inside leaving just the hollow glass vessel. This glass was very thin as the fire was not as hot as modern-day furnaces. The blowpipe was invented around 1 B.C. This allowed molten glass to be gathered at the end of the blowpipe and blown into the other end to create a hollow vessel. Eventually, the use of moulding was introduced, followed by the invention of the semi-automatic machine called the Press and Blow. In 1904 Michael Owens invented the automatic bottle machine. Before this time most glass bottles in England were hand blown. This is one of four bottles in our Collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases etc before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in the 1850s-1900s. The bottle gives a snapshot into history and a social life that occurred during the early days of Melbourne's development and the sea trade that visited the port in those days. 1850's Pontiled Black Glass Stout/Porter/Ale Beer Bottle, solid colour brown glass,concave base with Pontil scar, tapering slightly wider towards shoulder then inwards towards neck; ring of glass just below opening cork and wire type.Label "c.1850's "Stubby ale" hand made in England flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, brown glass bottle, handmade glass bottle, handmade beer bottle, handmade late 19th century bottle

This bottle is sometimes referred to as a black glass 'Gallon' bottle. It is used for storing and transporting liquor such as port or madeira. Glass bottles and glass jars are in many households around the world. The first glass bottles were produced in south-east Asia around 100 B.C. and the Roman Empire around 1 AD. America's glass bottle and glass jar industry were born in the early 1600s when settlers in Jamestown built the first glass-melting furnace. The invention of the automatic glass bottle blowing machine in 1880 industrialized the process of making bottles. In 2019, plans were made to re-introduce milk glass bottle deliveries to Auckland in early 2020. The earliest bottles or vessels were made by ancient man. Ingredients were melted to make glass and then clay forms were dipped into the molten liquid. When the glass cooled off, the clay was chipped out of the inside leaving just the hollow glass vessel. This glass was very thin as the fire was not as hot as modern-day furnaces. The blowpipe was invented around 1 B.C. This allowed molten glass to be gathered at the end of the blowpipe and blown into the other end to create a hollow vessel. Eventually, the use of moulding was introduced, followed by the invention of the semi-automatic machine called the Press and Blow. In 1904 Michael Owens invented the automatic bottle machine. Before this time most glass bottles in England were hand blown. This is one of four bottles in Flagstaff Hill Maritime Museum collection that were recovered by a local diver from the quarantine area just inside the Port Phillip Heads. Ships were required to pull into this area to check for diseases and other medical issues before they could head up to Melbourne. Quite often they would drink and throw the bottles overboard. Handmade glass bottle, manufactured in the 1850s. The bottle gives a snapshot into history and a social life that occurred during the early days of Melbourne's development and the sea trade that visited the port in those days. Bottle, glass, solid dark purple (black), round, matt surface. Glass ring below mouth, neck is slightly bulbous, body tapers slightly inward from shoulder to base. Base is concave with pontil mark. Bottle has no inscription. Generally used for storing port.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, handmade bottle, handmade english beer bottle, pontil bottle, black glass, gallon, purple bottle, ale bottle, porter bottle

Chair donated to Melbourne City Mission (probably in 1941) by Mrs RODDA of Williamstown and used at the Port Branch (Jubilee Hall) until its closure . From the 1950s it was used by Sister Norma BARNETT, who kept it until her death. It then went to her 'sister' Janne RAY, and on her death to Janne's daughter Tracey RAY. She donated this plus related items to PMHPS in 2017 (refer 1506 and 3906).01 - solid wooden chair with peaked/pointed shaped back. Arms have rounded ends. Upright section of chair has two indented pieces and a small 4 leaf shape under the top of the point with a small brass plaque attached under it. .02 - Cushion - velourOn plaque "Presented to the Port Melbourne Branch of the Melbourne City Mission in loving memory of my husband N.P.Rodda. Died 28th November 1941 at Williamstown. A life lived for others. Lead kindly light.religion - melbourne city mission, sister norma jean barnett, jubilee hall, tracey jane ray, janne ray

A 'Defiance' tennis racquet with oval non-bevelled head, solid convex throat and fishtail handle. String whipping around shoulders and model name imprinted across throat on obverse. Two deep furrows on handle. Materials: Wood, Lacquer, Metal, Glue, Gut, String, Painttennis

A Pastime tennis racquet, featuring: solid convex throat; gut stringing; fine-grooved handle; and leather end wrap and cloth butt cover. Decal of model name features across throat, on obverse. Materials: Wood, Metal, Lacquer, Glue, Leather, Gut, Cloth, Inktennis

A Wright and Ditson "The Club" tilt-top tennis racquet, with: solid, convex throat; smooth, rounded handle; and leather end wrap and butt cover. Inscription across crown and throat on obverse: "THE CLUB"/WRIGHT & DITSON/BOSTON. Materials: Wood, Gut, Lacquer, Glue, Metal, Leathertennis

Sad irons, also called flat irons or smoothing irons, are shaped pieces of metal that are flat and polished on one side and have a handle attached to the other, created for the purpose of de-wrinkling fabric. “Sad” is an Old English word for “solid,” and the term “sad iron” is often used to distinguish the largest and heaviest of flat irons.This iron is representative of the domestic appliances used throughout Australia up until electricity became widely available for domestic use.A small cast iron flat iron. The triangular shape of the iron made it easier to iron around buttonsdomestic appliances, flat irons, sad irons

Three Australian soldiers in World War 1 uniforms. Two are holding rifles with bayonets, the officer in the centre holds a Union Jack flag. The solider on the left has a VC medal as well as first world war medals. The link with Legacy is unknown but Legacy was founded by men who had served in World War 1. The photo is an example of first World War uniforms and equipment.Black and white photo of three soldiers from World War 1 mounted on dark grey cardboard.A degraded label on the back says 'Picture / Framers / ? / Beaments(?) / Camberwell / Glenferrie ?'world war one, soldiers, uniforms

The item was a donation to Ballarat School of Mines sometime in the early forties. It was handed in to Geoff Biddington thinking it may have nostalgic relevance to the Museum Collection. He handed it on to Bill Ryan who was the collector - Museum Exhibit. The type of solid brass ruler may have been used in Drawing Offices of Consultants - Engineers, Architects, Surveyors. Brass rule with straight edges. Mounted on grooved roller mounts. Lifting knobs at each end. Polished wooden box (blackwood) with brass hinges and clips.brass, ruler, engineers, architects, surveyors, museum collection, geoff biddington, bill ryan, exhibits

Stawell Post office built in March 1875 replacing the 1860 weather board building in the early Township of Stawell. The stucco exterior was described as modern Italian, and the building had excellent proportions. Special reference was made to the use of slate from Great Western. The foundations are of solid granite. The difference in this photograph to 85.01 would be approximately 100 years. Stawell Post Office possibly before 1880's on Corner of Wimmera and Main Street. Man on right of photograph standing in front of Akins Seed and Stationers Store near telegraph pole and horse. stawell

A photo of 5 badge sellers in army uniform with Legacy badge trays and Appeal tins on a Melbourne street. A photo of Badge Week in September 2001. The soliders name badges say "Riemers, Aspinall, Boekel, Dickson and Freeman". The same soldiers can be seen in photos with David Grierson at Legacy house prior to selling badges (00511).A record of fundraising during Legacy Week.Colour photo of Army personnel selling badges.Printing on the back "

In 1906 and 1907, students were taught to write with the letters joined. To achieve this booklets were designed to enable the student to copy the example and to repeat this, often to gain perfection. A student could be practising his/her writing while the teacher attended to other students and/or classes.Oliver Fisher lived at Mongan's Bridge a small, remote, rural area in the Kiewa Valley.Soft covered small booklet - grubby blue on back and very faded 'blue' on front with black writing. Held together with 2 staples. "For Tracing with lead pencil or pen. / Introductory Book, Price One penny" Writing surrounded by fancy graphics. Border is thick but not solid black line.Inside book letters have been copied but joined up to practice writing eg. m m m and then mu mu mu Each page is different. On some pages the date has been writteneducation, writing, mongan's bridge, oliver fisher, school

This doll's leg was one of a set of artefacts recovered from the shipwreck of the Loch Ard that were donated together. The doll's leg could have been from the ship's cargo or personal effects. Dolls from this era were often made from fabric, which would have quickly deteriorated in the ocean. Ceramic limbs were joined to the body by tightening the fabric around the grooves on the limbs. There are other doll's limbs in our collection that were recovered from the Loch Ard The object is now one of the shipwreck artefacts in Flagstaff Hill’s Mc Culloch Collection, which includes items recovered from the wrecks of the Victoria Tower (wrecked in 1869) and Loch Ard (wrecked in 1878). They were salvaged by a diver in the early 1970s from the southwest coast of Victoria. Advanced marine technology had enabled divers to explore the depths of the ocean and gather its treasures before protective legislation was introduced by the Government. The artefacts were donated to Queensland’s Department of Environment and Heritage Protection (EHP) by a passionate shipwreck lover and their locations were verified by Bruce McCulloch. In 2017 the Department repatriated them to Flagstaff Hill where they joined our vast collection of artefacts from Victoria’s Shipwreck Coast.The Loch Ard: - The three-masted, square-rigged iron ship Loch Ard belonged to the famous Loch Line which sailed many ships from England to Australia. The ship was built in Glasgow in 1873. The Loch Ard made three trips to Australia and one trip to Calcutta before its final voyage. The Loch Ard: - The Loch Ard left England on March 2, 1878, under the command of Captain Gibbs, bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo included straw hats, umbrellas, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that were intended for display in the 1880 Melbourne International Exhibition, including the famous Loch Ard Peacock. On June 1, 1878, Captain Gibbs was expecting to see land but visibility was reduced by fog. As it lifted, the sheer cliffs of Victoria's west coast came much closer than expected. The captain was unable to steer away and the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. The top deck was loosened from the hull, the masts and rigging came down and knocked passengers and crew overboard, and even the lifeboat crashed into the side of the ship and capsized. Of the 54 people on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael. The well-packed Minton porcelain peacock also survived, safe inside its crate. Much of the cargo was washed up, smashed and broken, and some was salvaged. Other cargo is still with the wreck at the base of Mutton Bird Island, now protected by Government law. The artefact is an example of cargo or personal items on board a ship in 1878. It provides a reference point for classifying and dating similar items. This artefact is significant for its association with the sailing ship Loch Ard, one of the best-known, and one of the worst, shipwrecks in Victoria’s history. Flagstaff Hill’s collection of artefacts from Loch Ard is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. It is historically significant for representing aspects of Victoria’s shipping history. Doll's leg, cream-coloured ceramic leg with two seams, a flat solid top and a glazed green ankle-length heeled boot. A shallow groove runs around the leg just below the top. An inscription is stamped into the leg below the groove. Recovered from the wreck of the Loch Ard. Inscribed "2"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, shipwreck artefact, wreck dive, mcculloch collection, bruce mcculloch, loch ard, 1878, loch line, victorian heritage register, sailing ship, captain gibbs, eva carmichael, tom pearce, mutton bird island, loch ard gorge, migrant ship 1878, cargo ship 1878, doll's leg, ceramic doll leg, porcelain doll leg, doll's limb, 1870s doll, 1870's toy, ceramic limb from doll, children's toy, children's recreation, doll's leg with green boot

The lectern is part of the original furnishings of St Nicholas Seamen's Church, Williamstown, Victoria. The church was operated by the Missions to Seamen organisation. THE MISSIONS TO SEAMEN (Brief History: for more, see our Reg. No. 611, Set of Pews) The Missions to Seamen was an Anglican charity that served seafarers of the world since 1856 in Great Britain. It symbol is a Flying Angel, inspired by a Bible verse. Today there are centres in over 200 ports world-wide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria the orgainsation began in Williamstown in 1857 as a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’ in an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000 the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943 a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village, so the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981 and closely resembles the Williamstown chapel. This lectern is significant historically for its origin in the St Nicholas Mission to Seamen's Church in Williamstown, established in 1857 to cater for the physical, social, and spiritual needs of seafarers. It originated in Bristol, England when a Seamen's Mission was formed in 1837. The lectern is historically significant for its connection to the Ladies Lightkeepers’ Auxiliary, an organisation of women, formed to support seafarers. The connection of this lectern to the Mission to Seamen and to the Ladies Lightkeepers’ Auxiliary highlights the strong community awareness of the life of people at sea, their dangers and hardships, and their need for physical, financial, spiritual and moral support. Solid wooden Lectern on two supporting legs. Top section has an angled back and small shelf at front, designed to support a bible. The two legs are supported by decorative wooden bar. The two legs have decorative feet. There appears to be a rectangular label in the centre front of the small shelf.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, religion, religious service, church furniture, religious furniture, lectern

Silver plaque mounted on solid wood depicting seven fighter jets, five at top, one flying downwards with a dragon in the cockpit, one at bottom with a full length dragon atop of fighter jet. Sgn Ld Alan r Reed is a Life member of the Grand Order Of tap DragonsFor head-sup, hook-down excellence in the emergency snaggin' and draggin' of the nylon tape of the land-based aircraft arresting equipment at Tan Son Nhut, Vietnam on 21st Sept 1968plaque, alan reed, tan son nhut

Originally had corrugated iron roof, additions to house in 1950's, internal alterations, roof tiled.Colour photograph of a Californian Bungalow style dwelling at 15 Barkes Avenue. Outer walls of timber and cement render. Tiled roof has hips and valleys, gables above the veranda. Brick and concrete solid square veranda columns. Upper windows with leaded quarries. Lakes Entrance Victoriahouses, heritage study

A wooden tennis racquet, apparently manufactured by Feltham, with extreme tilt-top head; solid convex throat; gold ribbon collar (now missing); and fine-grooved rounded handle. Impressed across throat on obverse: HENRY V. Materials: Wood, Lacquer, Metal, Gut, Glue, Ribbontennis

A wooden tennis racquet with solid convex throat fixed with one metal bolt. Head shape is oval though top slightly flattened. Rounded handle with 'Fish head' end. Trace remains of silver decal on throat (indecipherable). Materials: Wood, Lacquer, Metal, Glue, Gut, Inktennis

A wooden tennis racquet with solid convex throat. Octagonal handle with leather end wrap. Model name: 'THE MSD' imprinted across throat on obverse. Along throat on reverse is imprinted: MADE FOR/MELBOURNE SPORTS DEPOT/MADE IN ENGLAND. Materials: Wood, Lacquer, Metal, Glue, Leather, Guttennis

A wooden racquet with a solid, convex throat and a fine-grooved handle. Decal across throat on obverse: FAVORITE. Decal of company trademark across throat on reverse, inscription in front of large 'W' reading: THOS.E.WILSON & CO. Materials: Wood, Gut, Metal, Ink, Lacquer, Glue, Leather, Clothtennis

A wooden racquet with a solid, convex throat and a fine-grooved handle. Decal across throat on obverse: FAVORITE. Decal of company trademark across throat on reverse, inscription in front of large 'W' reading: THOS.E.WILSON & CO. Materials: Wood, Gut, Metal, Ink, Lacquer, Glue, Leather, Clothtennis