Spoke shaves were used by woodmakers to shape curved surfaces (originally wheel spokes). These two spoke shaves belonged to Ernest Phillips of Warrnambool who would have used them to shape the surfaces of chair and table legs etc. Ernest Brighton Phillips (1875-1924) was the son of Henry Phillips (a hay and corn dealer in Warrnambool) and his wife, Emma. He learned cabinet making at the Box Works in Warrnambool and in the late 19th century established a furniture-making and selling business at the corner of Liebig and Koroit Streets. By the early 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne and sold his products all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and after his death this Phillips house was acquired by the Methodist Church and the Heatherlie Homes for retired people were built on this site.These tools are of considerable significance as they were used by Ernest Phillips, a prominent businessman in Warrnambool during the late 19th and early 20th centuries. These are two spoke shaves - small planes, slightly curved, with wooden handles and a metal blade in the middle. The blade is attached to the handles via metal ends which go through holes in the wood. The blade area is strengthened with metal plates attached by metal screws. The metal parts are well-rusted and the handles are somewhat worn. ‘E. Phillips’ etched into wood on each spoke shave.ernest phillips, history of warrnambool

Carl Rudolph Braun (1823-1891) was the inventor of this instrument, as well as a type of decapitation hook. Braun was born and practiced in Austria, and followed Semmelweis as assistant to Klein at the Vienna Maternity Clinic in 1847, before becoming its head in 1856. Braud added a gynaecology section to the clinic in 1858, being convinced that obstetrics and gynaecology should be together. (Source: Baskett, Thomas. 'On the Shoulders of Giants: Eponyms and Names in Obstetrics and Gynaecology'). This device was included with a range of other obstetric instruments, mostly destructive instruments, given to RANZCOG from Box Hill Hospital labour ward in February- March 1998. The maternity service at Box Hill Hospital combined with St George's hospital in Kew to be known as Birralee Maternity Service. These instruments were collected by Julie Collette, Unit Manager, St George's Kew and given to RANZCOG Museum Curator, Susan Barnett.Craniotomy forceps, Braun's. Stainless steel forceps, with wingnut. Upper blade has open oval section and ridged grip section on the handle. Lower blade has serrated inner edge and ridged grip section on the handle. Wingnut is used for attaching the upper and lower blades of the forceps. Inscribed "B.H.H.L Ward" on forceps."B.H.H.L Ward"destructive instruments

These forceps are believed to be a type of uterine forceps. More research needed.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal scissor forceps. Consists of two blades, joined with a pin, with finger grips/handles at one end. Each blade of the forceps ends with a fine, curved point. When the forceps are closed, the tips of the blades touch. Engraved with the text ' BRITISH MEDICAL SUPPLY', the number 20, a symbol, and the text 'PAT.5.3.92.''BRITISH MEDICAL SUPPLY', 'PAT.5.3.92.'surgery

These hand saws belonged to Ernest Brighton Phillips (1875-1924). Born in Warrnambool, Ernest Phillips took up an apprenticeship in cabinet making at the Box Works in Warrnambool. By the late 1890s he had a furniture store and factory at the corner of Liebig and Koroit Streets. By the early 20th century Phillips had the largest furniture warehouse and factory in Victoria outside Melbourne. His products were sold all over Australia. Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today the site of the Phillips’ home contains flats for senior citizens in a complex known as ‘Heatherlie’. These tools are of interest as they belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th and the beginning of the 20th centuries. They are also examples of the type of tools used 100 years ago. These are two hand saws which belonged to Ernest Phillips of Warrnambool. They have a rounded wooden handle inserted via a metal plug into the end of a piece of wood which is slightly curved. Attached to the metal plug is a thin steel blade with a serrated edge. The blade is approximately the same size as the piece of wood. The blades are somewhat rusted.‘J. Marples & Sons, Sheffield’.ernest phillips, history of warrnambool

Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of its major industries. Many of the Italian families were involved in tobacco farming.Historical: This equipment was used on one of the tobacco farms in the Kiewa Valley. The cutting knife is home-made showing the resourcefulness of farmers living in the Kiewa Valley. Provenance: The tobacco farmer is from a local farming family in the Kiewa Valley.Steel 4 sided rod with blade attached at 1 end, blade at an angle to top. Handle covered with deteriorating leather by nails. Between rod & leather is a green rubber hose as part of the handle.tobacco. burley. knife. graham cooper. kiewa valley.

Classed as trench art.Cheese and butter knife made from a .303 calibre round with a blade attached at projectile end. Small engraving on both sides of the blade. Has been chrome planted. Trench art item.“MF W1 1942”trench art, memorabilia

A honing stone used for sharpening the cutting edge of steel bladed pocket knives or razor blades. The stone was issued to service personnel during World War 2. This stone was issued ca 1940.

Bow saw wooden frame and blade tensioned by a twisted cord and toggle stick. Blade has 8 points per inch. Toggle not original. 1710.1, 1710.2 & 1710.3-3 parts of itemflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bow saw

Gouge tanged paring gouge, metal blade octagonal wooden handle with steel ferrule. Gouge is a regular sweep. Has cast steel and Ross Sorby stamped on blade. 240mmL x 22mmWflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, gouge, paring gouge

Pocket knife. Single edge folding blade with square cut end steel blade and frame with horn grips. Made by Joseph Rodgers and Son, Norfolk St, Sheffield, England. Model No 6.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pocket knife, joseph rodgers and son

This chisel is one of several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some years in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie to establish the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool has a wooden handle indented in the middle to give a firmer grasp and a metal blade inserted at the end of the handle to form a chiselling straight edge. The metal blade is held at the handle end by a band of metal. The wood in the handle has been gouged out and broken at the top end on both sides. Traces of paint are on the handle and the blade is rusted.vintage tools, henry phillips, warrnambool, history of warrnambool

Handsaw with taper ground blade. Handle entirely enclosed and slotted to take heel of blade which is set in place with four rivets, one being longer and depicting kangaroo trademark. Handle elaborately carved with fishtail and decorative curves short distance from toe is a small notch or nib. RobtSorby Sheffield and a kangaroo stamped on bladeflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, handsaw, robtsorby sheffield, kangaroo trademark

Used with British No.4 MK1 Infantry rifle. Issued to British soldiers in World War Two (WWII)British No.4 MK 2 bayonet with scabbard. The No. 4 Mk. II was a simplified version of the No. 4 Mk. I which had a distinctive cruciform blade. The Mk 2 bayonet did not require the milling cuts required to create the cruciform blade flutes. Blade length 203mm. The plain spike gave rise to the nickname 'pig-sticker'.world war two, wwii, bayonet, british

An iron scraper or food chopper with an iron handle. It has a single blade.

Hacksaw with blade, no handle. Has a piece of plastic on frame for hand gripflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Plane Iron (blade) stamped Joseph Warner Warranted cast steel.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Bayonet, double edged, 25 cm blade w/metal scabbardNilbayonet., scabbard

Equipment used by the RegimentBayonet for Owen Machine Carbine, 25 cm blade, w/scabbardSLAZ, SLAZ44, Government arrow, A C V bayonet, owen

Type of equipment used by the RegimentBayonet for Owen Machine Carbine, 25 cm blade, w/scabbardX CA SLAZ44 SLAZ Government arrowbayonet, owen

Bayonet, French, Lebel, cruciform 52 cm blade, brass handle66891, Lebelbayonet, lebel

Equipment used by the RegimentBayonet and scabbard MK1 for Owen Machine Carbine. 25 cm bladeX6A, 4, 45bayonet, owen

This knife would have been used for food preparation.Knife; wooden handle and shaped metal blade with serrated cutting edge.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kitchen knife, food preparation

Plane, moulding type, made by A Mathieson and Son. 3/8th no blade Stamped; "A MATHIESON & SON / GLASGOW & EDINBURGH" around a symbol [Crescent and star]flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, plane, a mathieson & son, glasgow, edinburgh, hand tool

Self Propelled gun with blade to dig bund. Barrel in raised positionm-107, self propelled artillery, model

Belonged to Miss Elizabeth Bull, born in 1851, who came to Australia with her parents R & L Bull and settled in Bairnsdale, in Eastern Victoria in the 1860s. Donated by Mrs A. S. Fulton of 21 Waterloo St Camberwell, Victoria on 5th September 1986.Metal button home scissors with square cut section in top blade.

Most likely donated by Dr Frank Forster, possibly collected by him from colleagues initially.Uterine dilator, Goodell's, stamped inside the blades '23". Manufacturers unknown.uterine device, dilation, forster, frank

Most likely donated by Dr Frank Forster, possibly collected by him from colleagues initially.Uterine dilator, Goodell's, stamped inside the blades '23". Manufacturers unknown.uterine device, dilation, forster, frank

Possibly collected by Dr Frank ForsterForceps, Leishman's, one blade only [incomplete], coated in gutta pecha.forceps, obstetric