Cast Aluminium Zinc?? alloy? Step plate for the use on tramcar steps - with raised "dimples" to provide a non slip surface. Has not be drilled with the holes for positioning the tramcar. one has number 758 on rear, the second 3758. Two number held.trams, tramways, tramcar component, preston workshops, castings, tram 829

Used from Malvern depot in the time recording Bundy clocks that were located around the MMTB system. Related to the driver's shift number. Withdrawn from use when the Automatic Vehicle Monitoring (AVM) system came into use.Demonstrates a Bundy time recording clock key.Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" on one side and "172" on the other side with a steel section that controlled the action of the recording clock and provided the means of stamping the number "172M" onto a paper tape. tramways, trams, mmtb, clocks, bundy clock, timetables, drivers, malvern depot, operations

Army Jacket, Khaki Drill O.A, 1949 pattern, Two plastic buttons, Three Seargant Cheverons, Red Air force wings flash, Two large breast pockets, Two large lower pockets, Waiste belt with brass buckle attatched,

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of two soldiers on General Grant tank, one sitting in cupola, one standing on mudguard, wearing khaki drill uniforms and berets One of a collection of photographs of 8th/13th Victorian Mounted Rifles Regiment between 1948 and 1951.. " Alan Cunningham, Ernie Grant. "

Demonstrates how the SEC used signage to convey instructions to passengers and confirm the advice of the conductor.A brass metal plate sign with stenciled lettering and border lines etched and painted black. A small hole has been drilled in each of the corners to enable fixing to the tram car. The reverse has remnants of glue and timber fragments from past adhesion.tram signs, tram cars, tram safety signs

Used from South Melbourne depot in the time recording Bundy clocks that were located around the MMTB system. The key number related to the driver's shift number. The reference has details of the manufacturing of these clocks and the companies involved. .2 - as above, but for Kew Depot, No. 116. Added 28/9/2019.1 - Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" on one side and "18" on the other side with a steel section that controlled the action of the recording clock and provided the means of stamping the number "18A" onto a paper tape. trams, tramways, clocks, bundy clock, timetables, drivers, operations, south melbourne depot, kew depot

This photo depicts a man standing next to a large piece of mining equipment identified as a hydraulic chisel (alternative name: drifter dill or power rock drill). This piece of machinery was used in mining to place holes in the walls of a mine which were then filled with dynamite or other explosives for rock blasting or to make holes for plug and feather quarrying. The additional tools to the right of the photograph and in front of the machinery can be identified as either picks or as feather and wedges, the latter of which were used to split stone drilled by the hydraulic or power chisel. Depending on the date of the photograph, which is not provided, this chisel was either powered by electricity or by hydraulics. The following is written on the drill "R.C. FORD'S PATENT No91 / MELBOURNE VICTORIA 1879". The man depicted in this photograph wears a wide brim hat, a loose fitting white shirt and loose pants. He wears boots and has a medium sized dark beard. This attire, along with his locality in the mine and proficiency with the mining equipment, identifies this man as a miner working in this particular, but unidentified, mine. It depicts an instance of hydraulic chiseling which makes this photograph valuable for the study of mining techniques from a date c1880.The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray the types of machinery used in mining can reveal important information for technology and highlight the methods used to break apart the earth in order to obtain access to gold and other precious materials during the period this photograph was captured. Further research into RC Ford can potentially reveal even further information pertaining to this photograph. This image is of important historical significance for its ability to convey information about the methods and machinery used to access gold or mine more in general. It also highlights the size of machinery at the time and allows us to compare this to the size of the person standing besides the machinery to better understand the manpower which would have been required to use and set-up this macinery.A black and white rectangular reproduced photograph printed on matte photographic paper.Reverse: 7816/ copy 1/3gold, sluicing, gold sluicing, hydraulic sluicing, gold and tin mine, mining, gold mining, beechworth, burke museum, melbourne, victoria, hat, mining machinery, machinery, r. c. ford

A black and white photograph depicting seven men and four women surrounded by tunnel boring machinery. A tunnel boring machine (TBM), also known as a "mole", is a machine used to excavate tunnels with a circular cross section through a variety of soil and rock strata. They may also be used for microtunneling. They can be designed to bore through anything from hard rock to sand. Tunnel boring machines are used as an alternative to drilling and blasting (D&B) methods in rock and conventional "hand mining" in soil. TBMs have the advantages of limiting the disturbance to the surrounding ground and producing a smooth tunnel wall. This significantly reduces the cost of lining the tunnel, and makes them suitable to use in heavily urbanised areas. The major disadvantage is the upfront cost. TBMs are expensive to construct, and can be difficult to transport. The longer the tunnel, the less the relative cost of tunnel boring machines versus drill and blast methods. This is because tunneling with TBMs is much more efficient and results in shortened completion times, assuming they operate successfully. Drilling and blasting however remains the preferred method when working through heavily fractured and sheared rock layers.This photograph is significant as it shows the machinery used and attire worn by men and women during the gold rush era. Black and white rectangular photograph printed on photographic paperburke museum, mining, beechworth, boring machinery, excavate, gold, gold fields, gold rush, miners

This foot-powered treadle machine could be used to manually operate many devices such as a sewing machine or spinning wheel. Treadle machines were used to power sewing machines, dental drills, lathes, spinning wheels and saws The machine is mounted on a board to demonstrate treadle operation.This mounted, smoothly working treadle machine demonstrates the treadle mechanism that was used in the early 20th century to power mechanical devices and in turn to save time, energy and money. The treadle was used in domestic and industrial environments. The Collection at Flagstaff Hill Maritime Museum and Village has two treadle-operated dentist's drills, a treadle sewing machine, a saw, a lathe and a treadle paper numbering machine.Treadle-powered machine; a black painted metal wheel with four curved spokes, connected to a wooden treadle. The height of the wheel is adjustable. The mechanical device is mounted on a thick rectangular wooden block. The working treadle mechanism turns smoothly. flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, treadle machine, manual machine, foot treadle, display treadle, treadle, demonstration, education, working model

Pittock collection tools - Capstan cigarette tin containing mixed timber drills and one punch. Capstan Navy Cut Cigarettes tin, W.D. & H. O. Wills (Australia) Ltd. Sydney. Items stored in Pittance Coach builder's box, reference 13000.1.

Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.The 8th/13th Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of two soldiers in khaki drill shirts and trousers, boots, web anklets, belt and berets. They are standing to attention with rifles and have bayonets on belts. One of a collection of photographs of 8th/13th Victorian Mounted Rifles Regiment between 1948 and 1951" Tprs. Singe, Leischke. "

Items in the collection re "Lt. Col. J. Swatton", refer Cat No 6719.2P for his service details.1. Book, soft cardboard cover, dark beige, black print, 80 pages. 2. Book - soft cardboard cover, beige, red print on cover, 80 pages. 3. Book - soft cardboard cover, beige, black print, 38 pages. 4. Book - soft cardboard, dark beige, black print 84 pages. 5. Book - soft, cardboard, beige, black print, 58 pages.1. Dismounted Drill (all arms). 2. Small Arms Training - Grenades. 3. Projector, Infantry, Tank Attack (Australia) 4. Small Arms Training, Small Arms Tactics, 5. Training in Fieldcraft and Elementary tactics.passchendaele barracks trust, military instructions, lt.col swatton

Belaying pins can be metal but are often made of wood, treated or untreated, plain or with handles. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries.Belaying pin, metal, painted brown.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, sailing equipment, nautical equipment, rigging, yards, sails, belaying pin, sailing ship

Belaying pins can be metal but are also made of wood, treated or untreated, plain or with handles. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries.Belaying Pin, metal, painted white.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, sailing equipment, nautical equipment, rigging, yards, sails, belaying pin, sailing ship

Belaying pins can be metal but are also made of wood, treated or untreated, plain or with handles. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries.Belaying Pin, metal, painted white.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, sailing equipment, nautical equipment, rigging, yards, sails, belaying pin, sailing ship

Reports to Directors of Snowball Gully Gold Mining Co re Mining Details and Winding Up (sale); 1. 10 pages of details of mining progress (shaft sinking, drives etc) in the period 1905 - 1907 submitted by D Gummell, Manager; 2. Two pages listing the tools and implements on the mine when closed with attached letter to Directors (31/10/1907) submitted by D Gummell, Manager. Note: comment by Ralph Birrell on this second document (19/3/2013) - he observes that the sale of ''68 drills'' on the submitted list indicates that at this mine in 1905/07 they were still using drills and hammers.document, gold, snowball gully gold mining company, snowball gully gold mining company. d. gummell. ralph birrell.

Ref to Cat 5825 Patterson.This is made of jungle green cotton drill. It has one end pointed with two small cords. Inside are two pockets. One pocket is open, one pocket is held shut with the aid of a brown button. Inside the pockets are various loos items such as cottons, wool and needles.Written in ink on the outside is "1734719 Steele"vietnam war, soldiers kit, steele

This is a one piece, Australian Army uniform called a tank suit. It has a one piece body, long arms and trousers. Colour is jungle green, Material is cotton drill. It has numerous pockets which can be buttoned shut. There is a brass zip up the centre front.There are two little tabs inside with the number 38906 on 38908 written on them.uniform, australian army, tank suit

A ship's rudder indicator is used for measuring the angle of slope or pitch of the vessel. The information can be used to adjust the steering of the ship to give safe navigation. The rudder indicator transmitter once contained in this box was battery operated, according to the label inside this box. Box, wooden, used to store a battery operated Siemen's ship's rudder indicator. Made in the United Kingdom. Descriptive leaflet glued inside hinged lid. Lid secured by hooked catch. Brass latch. Metal mounting plate. Hole drilled in back. Dovetail joints. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, siemen's brothers london, siemen's rudder indicator box, nautical instrument for measuring pitch or slope, scientific instrument box, navigational instrument box

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 the Regiment was deployed to Merauke, Dutch New Guinea. Upon its return in April 1945, the Regiment was redesignated 20th Pioneer Battalion. It was disbanded following the end of the war. 20th Light Horse was the only light horse regiment to serve overseas in WWII.This is one of a collection of photographs featuring a Light Horse regiment drawn from rural and regional Victoria in the period immediately prior to mobilisation for World War 2 (1939-1945).Black and white photograph, mounted on card, of ten soldiers beside a ridge tent. Uniform is uneven, some in tunics, others in shirts or cotton drill jackets; some wearing hats with plumes, others forage caps. 20th Light Horse Regiment in camp circa 1939.

Straw effigies of the enemy strung up at Seymour Army Camp for use in bayonet drill. It was this sight and the compulsory instruction in the art of killing other men that so repulsed Les Chandler that he requested a transfer to an ambulance unit where he sought to save lives rather than take them. photoseymour army camp, seymour, target range, target dummies, ww1, world war 1, aif, a.i.f