Used in the 19th century.A curved wooden handled adze with a forged steel head which has a wide cutting blade and a small 5cm steel knob on top. It was used by woodworkers for cutting and trimming rough wooden planks and shaping ans smoothing wooden surfaces in the late 19th century.woodworking tools, wood, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Used in the 19th century.A long bladed forged steel adze head. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the late 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Used in the 19th century.A wide bladed forged steel adze with a smooth curved wooden handle. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes, wood

Used in the 19th century.A wide bladed forged steel Cooper's Adze head with a curved blade. There is no handle. At the opposite end there is a hammer shaped head. It was used by woodworkers for cutting and trimming rough wooden planks and shaping and smoothing wooden surfaces in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Cream linen supper cloth square, with cutwork eyelets and surface stitching. (missing).. 8 matching square serviettes with cutwork (applique') pattern in one corner and scalloped edgestable linen, serviettes

A ceramic pie funnel was a hollow ceramic tool that bakers and home cooks placed in the centre of pies to prevent the contents bubbling over. The hollow core allowed steam to escape during baking leaving the pie crust as light and flaky inside as on the surface. They came in a variety of shapes and sizes. This pie funnel was produced by Thomas M Nutbrown who started manufacturing kitchenware in 1927 from his factory on Walker Street, Blackpool. He registered the company in 1932 and over the following years his company was exporting goods all over the world. His company pioneered many unseen kitchen gadgets and utensils onto the market and had many products patented. The company closed in 1988.This item was typical of kitchenware used widely in the early twentieth century when a broader range of food items were home cooked.A ceramic pie funnel in the shape of an elephant. This is marked “NUTBROWN PIE FUNNEL Made in England” and was made by a company called Thomas M. Nutbrown Ltd of Blackpool. It also has a registered design number which is a little indistinct but is probably No 860928. It dates from the 1930’s and is in very good condition.On side of elephant in black ink "NUTBROWN/ PIE FUNNEL/ Made in England/ Reg. No 860928"domestic appliances, pie funnel, kitchenware early 20th century

The railways lunchbox belonged to Morris Brown, a Wodonga resident, and was used by him from the 1960s to 1992.The railways lunchbox has local significance as it belonged to and was used by a Wodonga resident. It also has historic significance due to its relative rarity and representativeness. Rectangular grey metal railways lunch box with a cream coloured painted metal lid secured with metal clips at both ends and a metal handle on the lid. The surface is very worn but there are traces of blue paint on the grey metal surface, which suggest it may have been blue. There is decorative adhesive contact paper lining the interior.railways lunchboxes, victorian railways, vr, v.r., morris brown

The five cell metal torch from c. 1950s has local significance due to being used by Wodonga resident, Bill Harris, in his youth, as well as historical significance due to its age and representativeness.Metal torch with a plated yellow surface around the light bulb and a long grip with repeated bands of three lines in the surface and a sliding on-off button."EVEREADY / TRADE-MARK / MADE IN HONG KONG" - on the base of the torch.1950s torches, metal torches, eveready torches, five cell torches, vintage torches

The money till was used in the Stiff & Gannon General Store, Hardware, Draper and Grocery Merchants in High Street, Wodonga, which opened in August 1946 and closed on 28 February 1970.Local significance as Stiff & Gannon was a major retail outlet and employer in Wodonga from the mid 1940s. A wooden money till with two drawers. The bottom drawer has a metal handle and both drawers are lockable. Paper slot in lid for invoices"TRADE Docket Co. MARK / DOCKET BOOK Co. [AUST] /DISTRIBUTORS FOR W.A." on a plaque attached to one end of the top surface.business, hardware, drapery, wodonga, stiff & gannon, general store

This glass design bears a leaf design etched into the surface. It is believe to have been produced in Melbourne, possibly at the Melbourne Glass Bottle Works Co Pty Ltd. It belonged to Mrs. Eliza Reardon, great grandmother of Mrs. Jean Raper.This item is from Raper Collection donated to the Wodonga Historical Society by Mrs. Jean Raper. A glass mug with and etched leaf design, thought to have been made in Melbourne, Victoria.glassware, decorative items, glass mug

This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.1. Locality Plan and Plan of Dam. The dam is about ten miles by road upstream from Albury and about three-quarters of a mile below the confluence of the Mitta Mitta River and the Murray River. Its main features consist of a concrete portion across the bed of the river with earth embankment at both ends. The foundations throughout are on hard granite, found at an average depth of about 40 feet below the surface, the centre line being located to take advantage of the most favourable rock levels.Heading on page "WORKS UNDER RIVER MURRAY WATERS AGREEMENT/HUME RESERVOIR" Beneath top diagram "FIG. 1. ELEVATION" Beneath second diagram "FIG. 2. PLAN" On map "LOCALITY PLAN"hume reservoir australia, river murray waters scheme, hume weir diagrams, hume weir location

This image depicts a scene of East Bentleigh in 1960, viewed along Thomasina Street as it crosses Gladwyn Street towards East Boundary Road in the distance. The gardens and new homes are well-tended, but the street surfacing is unsealed.Developing urban area now located within the City of Glen Eira, formally City of Moorabbin. This image illustrates the mid century urban sprawl of new suburbs and the subdivision of market gardens within the municipality and the changing demographic of the district as new houses are constructed and infrastructure established. Black and white photograph of unsealed road in new development in the area of Moorabbin, new houses appear on the lefthand side with paddocks on right side of image with installation of electric poles. Sealed road in the distance. Thomasina Street, as it crosses Gladwyn Street, East Bentleigh towards East Boundary Road. Handwritten in blue ink: 60 - 373 D Handwritten in red ink: 80% Handwritten in black ink: Ch. 6bentleigh, east bentleigh, market garden, housing, suburbs, infrastructure, moorabbin

Colour photographs, seventeen images on nine page. Images labelled as follows : 1. North New Moon shaft - natural discharge point of Garden Gullly line 2. Actual exit to surface from beneath mullock at North New Moon shaft. 3. Looking into Deadhorse Gully from mullock heap at North New Moon site. 4. Deadhorse Gully downstream of WMC Weir. 5. Sydney Creek track crossing - impassable ford. 6. Sydney Creek looking downstream from ford. 7. Sydney Creek looking upstream from road near Recreation Reserve (12 inch pipe under road). 8. Sydney Creek looking downstream from same point. 9. Sydney Creek - Camp Road, looking upstream.. 10. Sydney Creek - Camp Road, looking downstream. 11. Sydney Creek - Camp Road Culverts. 12. Sydney Creek - Pyramid Road Bridge, looking upstream. 13. Sydney Creek - Pyramid Road Crossing looking downsteam. 14. Sydney Creek - rail crossing, looking upstream. 15. Sydney Creek - rail crossing, looking downstream. 16. Sydney Creek - Airstrip road, looking upstream. 17. Sydney Creek - Airstrip Road, looking downstream 12 inch pipe under road. Lined paper, in blue pen 'Deadhorse Gully-Sydney Flat Creek, March 1986, Photos of Deadhorse Gully/Sydney Flat Creek'kangaroo flat gold mine, deadhorse gully, sydney flat creek, unity mining, water discharge, north new moon, camp road, pyramid hill road, eaglehawk

An hourglass or sandglass is an instrument for measuring a defined time and can be used perpetually by simply turning it over immediately the top bulb empties. The clear blown glass is shaped into two equal sized bulbs with a narrow passage in the centre and contains uniform sized sand or glass particles in the lower bulb. The width of the neck regulates the constant flow of the particles. The glass is held in a stand with top and bottom of equal shape and size. Hourglasses can measure an infinite variety of time by gauging the size of the particles, the shape and size of the bulbs and the size of the passage between the bulbs, thus measuring hours or minutes or even seconds. Generally an hourglass sits between discs of wood at the ends, which are joined by long wooden spindles between the ends and tightened by screw caps. The length of time can be adjusted by adding or removing sand particles. The use of the marine sandglass (or hourglass) has been recorded in the 14th century in European shipping. A one minute sandglass was used in conjunction with the ship’s log for ‘dead reckoning’, (see below) that is, for measuring the ship’s speed through the water. They were also used to regulate ringing the ship’s timetable; for example a 4 hour sandglass was used for the length of the sailors’ watch, and a half hour timer for taking of readings for the ship’s log; the ship’s bell would be rung every half hour. It was usually the role of the cabin boy to watch and turn the sandglasses over at the exact time of them emptying their upper chambers and to ring the ship’s bell. Hourglasses have been used historically for many hundreds of years. Some have been used for timing church sermons, in cooking, in industry and at sea. Even today they are used for measuring the cooking time of eggs and timing a player’s turn in games such as Boggle and Pictionary. The sandglasses at sea were gradually replaced in the late 1700’s to early 1800’s by the more accurate chronometers (marine clocks) when they became reliable instruments. DEAD RECKONING (or Deduced Reckoning) Dead reckoning is the term used to describe the method of calculating the ship’s position from its speed and direction, used in early maritime travel, mostly in European waters. Both the (1) speed and the (2) direction of travel were recorded on a Traverse Board at half-hourly intervals during a helmsman’s watch of 4 hours. The navigator would record the readings in his ship’s log, plot them on his navigational chart and give his updated course directions to the next helmsman on watch, along with the cleared Traverse Board. This was a very approximate, but none-the-less helpful, method of navigation. The wooden Traverse Board was a simple pegboard with a diagram of a compass with eight peg holes along the radius to each of the compass points, plus a grid with ascending half hours in the left column and increasing ship’s speed in knots in a row across the column headings, with a peg hole in each of the intersecting cells. A number of wooden pegs were attached to strings on the board. By placing one peg consecutively in the direction’s radius hole, starting from the centre, and the speed holes when the half hourly reading was taken, a picture of speed and direction for the whole 4 hour watch was created. (1) To measure the ship’s speed a one minute hourglass timer was usually used to measure the ship’s speed through the water and help to calculate its longitude. A rope, with knots at regular standard intervals and a weight such as a log at the end, would be thrown overboard at the stern of the ship. At the same time the hourglass would be turned over and a seaman would start counting the number of knots on the rope that passed freely through his hands as the ship travelled. When the timer ran out the counting would be stopped. A timer of one minute (one-sixtieth of an hour), knots spaced one-sixtieth of a nautical mile apart, and simple arithmetic easily gave the speed of the ship in nautical miles per hour ("knots"). This would be recorded every half hour. The speed could however be inaccurate to the travel being affected by ocean currents and wind. (2) To calculate the ship’s direction a compass sighting would be recorded each half hour.Marine hourglasses or sandglasses were used from around the 14th to 19th century during the time of sailing ships. This hourglass is representative of that era, which is during the time of the colonisation of Australia. Hourglass or sandglass; an instrument used to measure time. Two equal sized clear glass bulbs joined with a narrow passage between them, containing equal sized particles of sand grains in lower bulb. Glass sits in a brass collar at each end, in a frame comprising 3 decorative brass columns or posts, each attached top and bottom, using round screw-on feet, to round brass discs. Disc have Roman numerals for the numbers 1 - 12 pressed into their inner surfaces and hieroglyphics on the outer surfaces. Roman numerals on inner surface of discs " I II III IV V VI VII VIII IX X XI XII " Hieroglyphics impressed on outer surface of discsflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, horology, hourglass, hour glass, sandglass, sand glass, timing instrument, dead reckoning, deduced reckoning, finding latitude at sea, sandglass with hieroglyphics and roman numerals, hourglass with hieroglyphics and roman numerals, brass hourglass

Cast Aluminium Zinc?? alloy? Step plate for the use on tramcar steps - with raised "dimples" to provide a non slip surface. Has not be drilled with the holes for positioning the tramcar. one has number 758 on rear, the second 3758. Two number held.trams, tramways, tramcar component, preston workshops, castings, tram 829

Newspaper clipping The Herald, 20/8/1971 titled "Washboard Drive - Another horror road stretch", about the condition of the pavement surface in Gordon St Footscray - like travelling on a corrugated washboard. Has a photo of No. 53, with the destination of Moonee Ponds - taken with a telephoto lens.trams, tramways, gordon st, trackwork, footscray

Set of three Adhesive Label or Signs for use on Metcard machines or adjacent surface with the Metcard and Metlink logos of the type that where adhered directly to the machine - printed on a vinyl based Avery paper. .1 - "How to travel on a Concession Card" - with images of the various cards. .2 - "How to purchased your Metcard" .3 - "Purchasing the correct Metcard" - fares effective 1 Jan. 2009 - zones 1 and two only.trams, tramways, metcard, metlink, signs, tramcars

Page from a photo album book with adhesive surface and clear plastic sheet cover - on cardboard sheet - containing three photographs of Melbourne Trams. 1 - W3 668 at Brunswick Depot - June 1977 - Neil Mackintosh photo. 2 - W3 665 ditto 3 - Photo of cable trams reversing at the Moreland Hotel 1890, with horse tram No. 4 on the left hand side of the photo. In the background is a sign - Patterson? and Son, Auctioneers. See Reg Item 2861 for a framed photo of the image 3. Not known who assembled the album.trams, tramways, brunswick depot, w3 class, moreland, cable trams, horse trams, tram 668, tram 665, tram 4

Two Pages from a photo album book with adhesive surface and clear plastic sheet cover on cardboard sheet - containing three photographs of Melbourne L class trams and of the Murray River Queen paddle boat. 1 - L class 106 at Hanna Street Depot, special day 1975 - Neil Mackintosh photo? 2 - No. 105 Kingsway 3 - No. 103, Glenhuntly Station, 11/1/1947 - Photo by Bob Lilburn 4 - Murray River Queen paddle boat. Not known who assembled the album.trams, tramways, l class, kingsway, south melbourne depot, hanna st depot, glenhuntly, tram 106, tram 105, tram 103

Page from a photo album book with adhesive surface and clear plastic sheet cover on cardboard sheet - containing three photographs of Melbourne L and W3 class trams. 1 - L class 101 - Brunswick Depot - June 1977 - Neil Mackintosh photo 2 - ditto 3 - W3 665, ditto Not known who assembled the album.trams, tramways, brunswick depot, l class, w3 class, tram 101, tram 665

Three ruled foolscap sheets, tied in the top left hand corner with string, headed Prahran Malvern Tramways - tape measurement of surface slopes from High Street, Glenferrie Road Wattle tree Road to Burke Road. Prepared by Mr Mainwaring in black and red ink. Dated 30.6.1910. Items 2041 to 2052 within box 72.3 in a brown folder marked "PMTT" in red pencil.trams, tramways, pmtt, malvern, surveys, high st, wattle tree rd, burke rd

Block mounted photograph of a scene c1934 at St Kilda Junction, featuring re-surfacing of the junction tram track - used on page 3 of the December issue of Bellcord. "St Kilda Junction looking northward as tramway roadworks near completion. Workmen are dispersing gravel to cover recently applied bitumen, perhaps from the tanker (centre). Ballast Motor 11 pushes a ballast trailer ahead of W2 571 to St Kilda Beach and a second car to East Malvern. A horse drawn tower wagon (left), heavy roller (foreground) and private motor vehicles stand by. On the Punt Road corner is a petrol station advertising a then popular brand, Atlantic Ethyl, advertising Ford cars. Segments of the intricate junction overhead and trackwork are visible." 2nd copy added from the Donation by David Webb of the Keith Kings collection - in box 89.trams, tramways, st kilda junction, tower wagon, trackwork, freight tram, ballast motor, trailers, tram 11, tram 571

Used for decorative purposes on magnetic surfaces, such as on a fridge door. Likely an advertisement for the Public Transport Corporation.A marketing material associated with a now-superceded transit agency (since the 1990s).White rectangular sheet magnet with the text "Public Transport Corporation" printed in teal serif font between 4 black lines.public transport, public transport corporation, ptc

Used for decorative purposes on magnetic surfaces, such as on a fridge door, while also an advertisement for the Public Transport Corporation and V/Line.A marketing material associated with a now-superceded transit agency (since the 1990s). The V/Line logo shown was distinct in the 1990s, which has since changed as well.Rectangular sheet magnet with the logos of the PTC and V/Line on the top. In the centre reads, "City or Country/the best way to travel/is with The Met/and V/Line." At the bottom phone numbers for both groups are advertised, above the text "Public Transport Corporation."public transport, public transport corporation, ptc, v-line

Decorative item/sign used with velcro "loop" surfaces or patches to stick to surfaces. Likely used for advertising the Public Transport Corporation.Signage belong to a now-superceded transit agency (since the 1990s).The logo of the Public Transport Corporation (PTC) with the letters of its abbreviation molded in plastic. The PTC logo and the letters "P," "T," and "C" have 2, 3, 3, and 4 Velcro "hook" patches, respectively.signs, public transport corporation, public transport

Used as posted public information on surfaces. such as the interior of tramcars, buses or trains.An advertising/public information publication that is associated with a now-dissolved corporate body which existed in the 1980s.A yellow adhesive poster that provides information for customers on what types of tickets can be refunded and if so how. The brand of the adhesive (JAC) is printed on the adhesive-covering paper on the reverse side.public transport, the met, posters, tickets, fares

An interim report by the Melbourne and Metropolitan Tramways Board (MMTB) concerning the replacement of cable tramways in Melbourne, whose capacity was predicted to be incapable of coping with future demand. In light of some opposition to electrification via overhead wires, several schemes were outlined, including a conduit system, surface contact system, battery cars, petrol cars, petrol-electric cards, motor buses, and trolleybuses. In the conclusion, the MMTB asserted that all schemes other than overhead electrification are not optimal to serving the city, and remained committed to use overhead wires.A document that clearly shows the commitment of the now-superceded public transport agency (MMTB) to electrify the Melbourne tram network.Interim Report - MMTB - Upon the General Scheme for the future development of Tramways in Melbourne and Suburbspublic transport, mmtb, tramways, electrification, electricity

Fridge Magnet - featuring the Melbourne Tram Museum's logo and name, light metallic front wrapped around a magnetic surface with the Museum's website details on the rear.trams, tramways, fridge magnet, melbourne tram museum

Series of 15 black and white photographs of the track works to reconstruct tram lines showing various methods and works during the 1960's. .1 - Jackhammers concrete out around wooden sleepers - the rails have been bolted to them. .2 - Excavated track or temporary track next to newly relaid track - Hawthorn Road by Caulfield Park? .3 - Partly completed work - nearest track relaid, second track still has wood blocks? and then a temporary track. .4 - Excavated previously concreted and bolted track. Appears to be new rail. .5 - Compacting a new track bed with work laying track in the background. .6 - Rail being craned into position onto small concrete blocks - Nicholson St North Fitzroy at Church St - the church is now Melbourne City Mission Palliative care centre. 1955/56 - construction of the replacement track. Note the Hail bus stop sign on the corner. .7 - Thermite welding being set up. .8 - after a Thermite welding joint completed. .9 - track reading for pouting concrete, with a rebuilt track alongside and temporary track on the other side. .10 - ditto .11 - Concrete being poured .12 - ditto - could be Maribyrnong Road bridge replacement. .13 - Screeding off the concrete - possibly Nicholson St North Fitzroy .14 - completed surface - location as above .15 - completed surface with cloth covers to assist the concrete being cured. Has a MMTB hut and two worker amenity buses alongside. - location as above.Some photos have pencil marks on rear.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment, concrete, welding, nicholson st, new tramway, buses