Two small identical wooden tables that are 17 centimetres high, 34 centimetres long and 21 centimetres wide. One is painted green, the other has a clear timber finish. The legs are two and a half centimetre square at the top tapering to one and a half centimetre. Pieces of wood one centimetre by three centimetres secure the legs to the underside of the table. A one centimetre by a half centimetre wooden bead is attached to the underside of the table between the legs and the edge of the table. woodwork, small table

A wooden construction of three pieces. The lower piece is eleven centimetres square and two centimetres high, there's a one centimetre right angle edge then angled two centimetre long and rising one centimetre section, then there's half centimetre high and seven centimetre square flat section. The middle piece nineteen centimetres high and four centimetres square at the bottom tapering to three centimetres square at the top, each side has two eleven centimetre groves in it that start and finish four centimetres from each end. The upper piece is a smaller inverted copy of the lower piece, it has four centimetre square attached to the middle piece and an eight centimetre flat square on top. It has a clear coating applied to it which is deteriorating. woodwork, small display pedestal

Mahogany vase stand with turned and fluted pedestal.Stamp on base 'manufactured by Jarman St. Clare Pty Ltd, 49 Cambro Rd., Clayton, Vic, 3168'. Also sticker on base, with same details but also 'colour: Mahogany, code P16'furniture, domestic, mahogany, woodwork, pedestal, vase stand.

Steel spike. Square cross section on body of spike with domed head.No visible markingstrades, metalworking, nail, spike, steel, construction, woodwork.

Wooden plane.planes, woodworking tools

Wrought iron Carpenter's Brace."12"woodworking braces, carpentry tools

Tenon saw with black wooden handle."Coreter"woodworking saws

A tool to set the teeth of saws used in the early 20th centuryA metal guide used to set the teeth of a circular or crosscut saw when sharpening - i.e. to angle the teeth so that the saw bites into the wood.. It was used in the early 20th century.handsaws, woodworking saws, log saws, woodcutter saws

Used in the 19th centuryAn all steel bit brace made of forged metal with a round knob on the turning handle and a screw to tighten the bit when attached. It was used in the late 19th Centurytools, carpentry tools, woodworking tools, steel

Used in the late 19th centuryA forged steel Bit brace with a large screw to secure the drill bit and a knob at the end of the turning handle. It was used in the late 19th century.on the knob - "10" is stampedsteel, tools, carpentry tools, woodworking tools, cutting tools

Used in the early 20th CenturyAn early 20th Century steel bit brace with a wooden knob on the handle.tools, carpentry tools, woodworking tools, steel

Used in the late or early 20th Century. Could be used to cut steel.A curved steel shaped wooden handled Bow saw with a curved nail puller near the handle. A metal saw blade is attached by a screw at the end where it is fitted. Used in the late 19th or 20th Century.saws, carpentry tools, woodworking tools, tools, steel, wood, metal

Used by the Ockwell family in the late 19th centuryAn 'M' toothed steel hand saw used to saw rough wood or cross cut wood. It has a wooden handle which is rivetted on with four brass rivets. It was used in the late 19th Century.hand tools, woodworking tools, carpentry tools, wood, steel, hand saws, saws, cutting tools

Made approximately 1890An all steel docking saw with a rough toothed blade used to saw rough wood. The steel eight hole decorative patterned handle is rivetted on with two steel rivets. hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools

Used in the 19th CenturyA large handmade wooden barrel shaped headed maul with two steel bands at each end. The handle is a metal pipe. It has a worn piece of a leather flap near the flanged join of the handle where it meets the head. A solid steel rectangular wedge which was used to split logs is displayed with the maul. It was used in the 19th Century.mauls, striking tools, long handled heavy wooden mallet, steel, wood, tools, wedge, splitting tools, splitting wedges, woodworking tools

Used in the 19th CenturyA large handmade wooden barrel shaped headed maul with two steel bands at each end and a wooden handle. It was used to split logs or timber particularly hardwoods using a wedge as shown in the media photo. The rectangular steel wedge has a pointed end which is damaged. It was used in the late 19th Century. mauls, striking tools, steel, wood, tools, splitting wedges, wooden mallet, woodworking tools

Used in the late 19th century.A steel bladed wooden curved handled Shingle Splitter sometimes called a Paling Knife used for splitting or cleaving timber. It has two crossed hammer shape symbols stamped at the beginning and end of the inscription - Wolpin Wedge Mills. It was used in the late 19th century.Wolpin Wedge Millssteel, wood, froes, cleaving axes, axes, cutting tools, hand axes, woodworking tools

Used in the late 19th century.A forged steel narrow headed mortising axe with a long wooden handle. It was used in the construction of post and rail fences where it could be used to chip out small pieces in the wood. It has Rob.Sorby Sheffield and Steel Pod stamped on the head with a kangaroo design. The company have been manufacturing 'edge tools' for more than 200 years. They adopted the kangaroo brand in the early 1800's when the new colony of Australia was a big market for their tools. It was used in the late 19th century.Rob.Sorby Sheffield. Steel Pod with a kangaroo design is stamped on the head.axes, cutting tools, hand axes, froes, woodworking tools, cleaving tools

Used in the 19th or early 20th century.A steel forged metal headed broad axe with a turned wooden handle for a right handed person's use. It was used to trim posts or logs in the 19th or early 20th century.axes, cutting tools, hand axes, froes, woodworking tools, cleaving tools

A Peg tooth forged steel crosscut saw with two wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain. It was used in the late 19th Century.hand tools, woodworking tools, carpentry tools, wood, steel, hand saws, saws, cutting tools, crosscut saws

Used by Edgar R Sebire.A Peg tooth forged steel crosscut saw with two wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain. It was used in the late 19th Century by Edgar R Sebire.hand tools, woodworking tools, carpentry tools, wood, steel, hand saws, saws, cutting tools, crosscut saws

A forged steel fine tooth crosscut saw with no handles. There are four rivet bolts and two round handle holders at each end of the saw. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used by Wandin T SebireA forged steel 'M' toothed crosscut saw with wooden handles bolted on. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.'W' is stamped on the blade.hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used in the 19th century.A forged steel narrow bladed double Peg and Rake toothed crosscut saw with no handles. It was used to saw rough wood or cross cut wood against the grain in the late 19th Century.Stamped on the saw: made of Simond Steel, Trade mark Reg. Warranted The Simond Saw Est 1832, Simond Steel & Saw co USA. Crescent Ground Steel Mill, Lockport New York. Factories Fitchburg Mass, Montreal Quebec No 325hand tools, woodworking tools, carpentry tools, steel, hand saws, saws, cutting tools, crosscut saws

Used in the 19th century.A slightly curved wooden handled axe with a forged steel head. It is a multipurpose cutting tool used for felling and delimbing trees, splitting of logs for firewood and dressing of logs for timber conversion. It was used in the 19th century.woodworking tools, wood, steel, froes, cleaving axes, axes, cutting tools, hand axes