Used to make cast for the metal ring gear for the water wheel which powered the Mill.Slightly arched wooden pattern with wooden ridges along the edge. Three square metal plates with a hole in the centre, bolted on with four bolts. Ten pentagin pieces of wood attached to the face.

Condiments set including stand made of brass (?) with four ball feet, flat base, wire frame and handle to fit four glass containers. 1st glass container: rectangular glass box (no lid) with moulded geometric pattern. 2nd glass container: square base with round neck, same geometric pattern, broken stopper. 3rd glass container: square with metal hinged lid with knob.E.P.N.S., 1' (Electro-Plated Nickel Silver), embossed on frame and metal lid of 3rd itemdomestic items, food and drink consumption, condiments, glass, rack, e.p.n.s., metalwork

This Gunter’s Chain, an old land surveying instrument, is named after its inventor, Edmund Gunter (1581-1626), an English mathematician and astronomer. It was first produced in 1620. The tool has 100 links and is 66 feet or one chain long. The links are marked off in groups of ten by metal rings or tags. A quarter chain (25 links) is called a rod or pole and ten chains make a furlong and 80 chains make a mile. The traditional cricket pitch is 22 yards or one chain long. This Gunter’s Chain is of considerable significance because: 1. It is an early land measuring tool that was used for over 250 years and has great historical and mathematical significance. A Gunter’s Chain would have been used when forming and building local roads from the earliest days of settlement. 2. It has a possible local connection as it was given to the Historical Society by a local person in 1965 and possibly came from the property of ‘Rosehill’ This is a metal tool which consists of 100 metal pieces or links joined together by loops at each end with two metal loops in between each link. The links joined together form a chain. The two ends of the chain have small metal handles attached At intervals along the chain there are additional rings or metal pieces attached. Some white and green rope material has been used to bundle up the chain. The metal is somewhat rusted. gunter’s chain, land measurement tools, history of warrnambool

Black box containing a Matrix Braille writing machine, with a 24mm-wide paper spool attached to the feeding mechanism. Corner of box is hinged and lifts up to reveal keyboard. Top half of box lifts to reveal Braille writer which is bolted to a wooden base that can be lifted out. The base is secured with a metal latch. Machine has black Bakelite keys with rubber pads beneath make this a "silent" machine; wooden case has black leather-like covering, hinged lid, metal clasps, and leather handle on the side. "Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front,Black vinyl-covered case containing black metal writer and paper spool"Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front.braille equipment, royal national institute for the blind

Photograph of ex Geelong (not on bogies) 38 at Queens Park, late 1957, printed on Kodak paper. Has details of tram on the rear, including that it had been "demolished for scrap metal by Newtown Scout Troop 1961" On the rear of the photo in ink. "Queens Park Newtown, Photo late 1957" and "38 demolished for scrap metal by Newtown Scout Troop 1961" trams, tramways, geelong, queens park, tram bodies, tram 38

Gift of the Moderator, Rev Jason Kioa.Round decorative glazed ceramic wall plate depicting a hand painted snow scene. Metal plaque adhered to plate.Metal plaque: "In appreciation of the Uniting Church on the occasion of the shared Ramadan Iftar Dinner 9 October 2007 Australian Intercultural Society". On back "Hand Made Kutahya - Turkey. Bilal Altinkaynack".australian intercultural society, kioa, jason, rev.

Army issue , World War 1,folding cutters convenient for personal carrying.used for cutting wire if required when on duty during service dutyFolding metal wire cutter, four rivets, one large and three small. Some rustingStamped on cutting head "THOMAS SMITH & SON / SALTLEY LTD / 1917" stamped on opposite plier arm, broad arrow and "J"world war 1, army issue, metal, wire cutters, folding wire cutters, cutting tools, broad arrow, thomas and sons, saltley, birmingham unitedkingdom

Gold metal plaque "Presented to vietnam Veterans Museum Phillip Island by Ian James Rogers J.P. Royal Australian Corps of Signals. Sergeants Mess HistorianGold metal plaque "Presented to vietnam Veterans Museum Phillip Island by Ian James Rogers J.P. Royal Australian Corps of Signals. Sergeants Mess Historianplaque, royal australian corps of signals

Metal badges - relief of a Melbourne V class, number 114 in a largely red colour scheme. with an enamel gloss finish. On the rear of the badge has stamped "Not Transferrable Taiwan"Demonstrates an item made for wearing on a jacket or cap.Badge - metal cut into the shape of a tram with a trolley pole and painted. Has a pin clip on the rear with a retention or secure style clip.trams, tramways, v class, tram 214

A megaphone or loudhailer is usually portable or hand-held, the cone-shaped acoustic horn used to amplify a person's voice or other sounds and direct it in a given direction. Used to communicate with others over distances. In Greek mythology, "Stentor" was a Greek herald during the Trojan War. His name has given rise to the adjective "stentorian", meaning loud-voiced, for which he was famous. The large funnel-shaped device is made of painted metal that is riveted together. It has no metal mouthpiece at the narrow end but rather a larger opening that is associated with a movie directors megaphone. It could also be used in a maritime situation or anywhere a person needs to amplify their voice to give directions to others over a distance. The Megaphone has significance for its provenance and historic value, and also as a relatively rare item of equipment once used worldwide in not only marine situations, or light house stations as well as many other differing types of applications where a person voice was needed to be amplified when communicating with others.Megaphone or loud hailer, metal painted green with handle and a large indented mouth piece. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, megaphone, loud hailer, directors megaphone, communication device

One of a range of metal face masks designed to have a cover which helps protect the patient's face.Wire frame mask designed to cover mouth and nose. There is a metal hook on the left hand side protuding from the base of the mask and wire mesh raised from the base with a circle in the middle.facemask, anaesthesia, ramsay surgical

Bronze-gold circular metal "film canister" with the word "convergence" applied to lid using "Colour Ease" system available at university at the time. This was essentially a way for Ballarat design students to produce their own transferable graphics and was often applied to packaging. The metal canister is filled with coffee beans, CD Rom, brochure, a coaster and poster. Some invitees received gold-bronze canisters, some received silver.Bronze-gold metal film canister. "Convergence" wording hand applied using Colour Ease method. Small white labels holding lid on (no tack remains).university of ballarat, federation university, graphic design, helmut stenzel, colour ease

Hames are attached to a horse collar used to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wood pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. This pair of hames would have been used on a farm in the Orbost district. Horses played a vital role of the agricultural industry in Orbost before the mechanisation of farm machinery. This item is associated with that time.A pair of hames, iron shaped over a wooden frame. They are linked together by a metal chain. Each has a hook attached and a metal ring at the end.WARRANTED PLOUGHMANBRAND FORGEDequestrian saddlery rural agriculture horses hames

Beige silk parasol printed with bold zig-zag design in brown, orange, yellow and turquoise. Metal spokes tipped with white bakelite. Wooden handle decorated with pokerwork design painted red. Wooden ball covered in silk thread and twisted cotton cord hanging from handle.Cast in metal spokes: THE ARMSTRONG REGD BRITISH MAKE Woven label, blue on white cotton attached to spoken: Perfectionparasol, the armstrong, 1920s

This trunk was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. The trunk was used by Dr. Angus when he served as Surgeon Captain for the Australian Army during WW2. At that time his residence was in Warrnambool. His time of service was spent in Ballarat, Victoria, and in Bonegilla, N.S.W. The portion of the paper label on the trunk that ends in an 'a' is possible the end of the word 'Bonegilla', where his trunk could have been sent. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Trunk, handmade, from the W.R. Angus Collection. Wooden trunk, rope handles on ends, metal hinges, previously closed by nails. Trunk has labels with names and destinations. Stamped into wood on end is text from original timber. One paper label is peeling off.Metal label “Captain W. R. Angus” (black writing on white metal label). On lid in blue writing “Captain W.R. Angus”. Paper label “Captain W.R. Angus, 214 Koroit Street, Warrnambool, Victoria. V 141633 (looks like)”. Obscured label “ - - a Rail Station”.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, t.s.s. largs bay, warrnambool base hospital, flying doctor, medical treatment, surgeon captain w.r. angus, ww2 service ballarat, ww2 service bonegilla, wooden trunk, military service, trunk for personal effects storage

Edward Pyke and Jean Maurice Glauser invented this machine with the intention of enabling the easy and quiet production of Interpoint Braille. Although widely agreed to be one of the best Braille machines of its time, production of the machines was stopped during the Second World War because of rationing and high material costs. The machine has a keyboard arrangement at one end, the other end folds out to form a platform which is held up by a metal strut with rubber capping. An upward writing model, the paper feeds from the rear and passes under the space bar. The machine has no paper feed rollers. The only movement is that of the carriage that moves from left to right.Painted metal machine with metal keys that move a carriage across inserted sheets of paperRoyal National Institute for the Blind 228 Great Portland St London W1 Pyke-Glauser Braille Writer PG 48braille equipment, royal national institute for the blind

A separator is a centrifugal device that separates milk into cream and skimmed milk. Separation was commonly performed on farms in the past. Most farmers milked a few cows, usually by hand, and separated milk with a hand operated machine for domestic use. The milk was poured into the bowl on the top and the handle had to then be turned fast enough to get the separator up to speed adequate to separate the cream and the milk. The milk would come out of one spigot and the cream out of the other. In general practice some of the skimmed milk was consumed by the family, while the rest may have been used to feed calves and pigs. Enough cream was saved to make butter, and the excess was sold. In many cases excess could be bartered or swapped with neighbours for other items of produce. LISTER - A prominent make of separator which became very popular with the dairy farmer, was the "Lister" separator. The early separators sold by R. A. Lister in the 1880's, were made by "Koefoed & Hauberg", Copenhagen. Denmark, called the "Alexandria". Ashton Lister became the sole agent for Koefoed & Hauberg made separators in England and all the English Colonies, throughout the world. Being an enterprising salesman, Ashton, sent his son Edward on a three-year sales tour of Australia & New Zealand in 1890, (hence the strong presence of Lister in Australia.) Initially, the separator was totally manufactured in Denmark and assembled in Dursley, England. By 1892 Lister were making parts at their Victorian Iron Works, and around about the early 1900's, Lister began manufacturing separators in their own right, severing ties with Koefoed & Hauberg. The Lister firm is still going today, under the name of Lister Petter, England, but do not manufacture separators, as the manufacture of farm / domestic separators ceased in the early 1960's.This item is significant as it is representative of domestic and dairying machinery used throughout rural areas of Australia in the early to mid 20th century.The separator is made in 3 sections. The base is metal plated with blue enamel. The vat is made from silver painted tin. There are 2 outlet spouts. The detachable handle, made from cast iron and wood, is held in place by a screw. A metal plate featuring the manufacturer information is attached to the side of the handle. Model CR 15 hand operated table version.On metal plate attached to handle" Lister/ MADE BY R. A. LISTER & Co.LTD. / AT DURSLEY ENGLAND / VICTORIAN AGENTS / GIPPSLAND & NORTHERN CO-OP/ CO. LTD. / MELBOURNE C.1"dairying industry, dairy machinery, milk separators, lister separators

Plaque commemorating the awarding of the Takeo Iwahashi Prize to Hugh Jeffrey in 1988. Takeo Iwahashi was the founder of the Nippon Lighhouse for the Blind in Japan. He made an enormous contribution to the lives and progress of blind people around the world, and was a great friend of Helen Keller. The annual Takeo Iwahashi Award was founded in his memory and is awarded to a "worker for the blind whose contribution to work for the blind in the fields of education, training, rehabilitation, placement, prevention and cure of blindness, administration of services for the welfare of the blind or any other program related to the welfare of the blind has been outstanding." The plaque features two roughly rectangular wooden veneer boards, one smaller layered on top of the larger, with the top edges aligning. On the smaller top layer is a round metal disc featuring a raised relief portrait of Takeo Iwahashi. Printed above in gold lettering is the following: The 13th Annual Takeo Iwahashi Prize Mr Harold Hugh Jeffrey" Below the disc is printed "March 16 1988. Nomination Committee Takeo Iwahashi Award. Nippon Lighthouse, Welfare Center for the Blind." On the back of the plaque is a metal plate with a Braille transcription of the text.1 wooden block with metal plaqueThe 13th Annual Takeo Iwahashi Prize Mr Harold Hugh Jeffrey March 16 1988. Nomination Committee Takeo Iwahashi Award. Nippon Lighthouse, Welfare Center for the Blind.hugh jeffrey, awards

Comprises a collection of metal, wooden and plastic toys which would possibly date back to the 1920s to 1940sThis collection came from the Warton / Baker families from Tawonga and Redbank in the Kiewa Valley.Collection of metal toys: 1. x2 Train Locomotives 2. Red tractor - mechanical with key 3. Man using grinder - mechanical with key 4. Two birds with worm - mechanical with key 5. Green trailer - mechanical with key 6. Small tank - mechanical with key 7. Aeroplane 8. Metal top 9. Home-made push-along wheels 10. Home made top 11. Cap gun 12. Cookie Cutters 13. Small tin puncture Kit - empty 14. Metal fox whistle 15. Tin trumpet 16. Large metal pump top 17. Plastic & metal mechancal toy in cardboard box- Jolly Skipper Other: 1. Monkey puppet with paper legs 2. Small plastic bells 3. Plastic boy on bike 4. Plastic green car 5. Plastic small trains 6. Soldier dog 8. Two half coconut shells (hollow) 9. Cylinder of wooden mechano tinker toy 10. Plastic Mr & Mrs Funny Face in box 11. Trip to New York game in box 12. Wooden Modelcraft - Build-ees in box 13. Wooden ring 14. Jig-saw toys, puzzles, wooden mechano, mechanical toys, recreation, children

The Red-Necked Grebe is a medium sized bird with a long neck and pointed bill. During the non-breeding months, this bird has grey, white and brown plumage. During the breeding seasons, the Red-necked Grebe has a rusty red coloured fore-neck and breast with a black bill and white cheeks. This species can be located in freshwater lakes of the northern hemisphere. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum and the National Museum of Victoria, as well as individuals such amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.A Red-Necked Grebe of medium size stylised in a standing position with the face positioned forward. The bird stands on a wooden pedestal with two tags around its legs. One tag is paper and documents cataloguing information and the second is metal and lists the number 4492. This Red-Necked Grebe has pale feathers of white, grey and browns typical of this species in the non-breeding months. The face is positioned towards the front and the small eyes are made from dark glass.Paper tag: 32a Red-necked Grebe Catalogue, Page, 43. Metal tag: 4492taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, red-necked grebe

This fairly large woodpecker of the Picadae family is widely distributed across most parts of Europe and the UK, with some occurrence in Western Asia. Preferring semi-open habitats such as woodlands, heathlands and gardens, the species is unique amongst woodpeckers as it prefers to hunt and feed on the ground for its ant prey. This species has a distinctive bright red crown, black moustasche-like stripes, mostly green back plumage and a paler green to yellow breast. This is a female of the species as the male has a red centre to the moustache stripe at the side of the beak. This specimen is a fairly accurate depiction of a Green Woodpecker. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century.This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This Green Woodpecker has a distinctive red crown on its head that appears patchy. It has a black face, a black moustache-like stripe on each side of the beak, pale eyes and long light yellow-orange beak. The back of the bird is green, and its flank and breast is a pale cream-yellow colour. It has slightly visible distinct white-dotted brown feathers folded into its wings. The specimen is mounted on a wooden perch, with a metal tag tied around its right leg and a paper tag around each leg.Swing tag: 1e. / Green Woodpecker / Catalogue page 66 / Metal tag: 4308 /taxidermy mount, taxidermy, burke museum, beechworth, australian museum, reynell eveleigh johns, bird, woodpecker, green woodpecker, eurasian green woodpecker

Souvenired by Alfred Edward Boland V59811, VX120170. Refer 2473 for service details.Japanese propeller tip from a plane shot down over Darwin in 1943. Wood covered with canvas (painted red and blue), overlayed with metal (possibly brass) in leading edge. Inscribed with "To Bette from AIF, I love you."Inscribed "To Bette from AIF, I love you" on metal leading edge. "Jap prop tip Darwin 1943" on red sectionmilitary history - souvenirs, military-aircraft, japan

Used in the late or early 20th Century. Could be used to cut steel.A curved steel shaped wooden handled Bow saw with a curved nail puller near the handle. A metal saw blade is attached by a screw at the end where it is fitted. Used in the late 19th or 20th Century.saws, carpentry tools, woodworking tools, tools, steel, wood, metal

Participants of the 1966 RVIB Centenary Conference were provided with a name badge. It consisted of a golden coloured metal, with the blue lighthouse logo of the Royal Victorian Institute of the Blind, and the dates '1866' and '1966' either side of the centrally placed symbol. Below this, also in blue, is 'Centenary Conference'. A paper card can be inserted into the badge for the wearer's name. 1 gold coloured metal name card holder with name card'Royal Victorian Institute for the Blind' ' Centenary Conference' '1866-1966' 'Mrs Wertheim'royal victorian institute for the blind, badges

Designed to create an impression on paper, the stylus allows users to create Braille through the applied use of pressure that creates a depression on one size of the paper and a raised dot on the alternative side. Used in combination with a slate to guide placement, this was the primary source of Braille books in the late nineteenth and early twentieth century before Braille typewriters were commonly used. In this example the handle is made of Vulcanite (according to the RNIB Illustrated Catalogue of Apparatus and Games, 1968), and the metal tip can be shielded by rotating the rounded section near the tip, which loosens and drops down.1 stylus with metal tipbraille equipment, royal victorian institute for the blind

A colander, sieve or cullender is a kitchen utensil used to strain foods such as pasta or to rinse vegetables. The perforated nature of the bowl allows liquid to drain through while retaining the solids inside it is sometimes also called a pasta strainer or kitchen sieve. Conventionally, colanders are made of a light metal, such as aluminum or thinly rolled stainless or plated steel, colanders are also made of plastic, silicone, ceramic, and enamelware. The word colander comes from the Latin Colum meaning sieve.Early 20th century kitchen item possibly of French manufacture due to the design and shape of the bowl this design appears to have been favoured by the French around 1910 for smaller Colanders. This item gives a snapshot into domestic life around the late 19th and early 20th centuries and the types of kitchen equipment in use.Strainer or colander, metal, with concave base and wood handle, plated metal construction with welded or folded seams. Handle painted black, perforated base.Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, strainer, food strainer, seive, food preparation, kitchen ware

A cooper would use a flagging iron to insert reeds around the head of a barrel to tighten the head and stop any leaks. First the cooper removes the full and quarter metal hoops around the barrel, this loosens the staves and insert reeds around the head, prying the stave apart from the head with a flagging iron. Then he replaces the hoops to tighten the staves against the head and the inserted reeds to form a leakproof seal.An age old tool used for many hundreds of years in the making and repairing of wooden barrels and an essential tool in a coopers tool kit.Coopers small Flagging iron metal painted black Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagging iron, coopers tools, barrel making, repairing barrel leaks, barrel head tightening