Scale model of a Armed Personnel Carrier (APC) variant with additional headroom and aux motor to provide power when it is stationary. It carried additional radios and crew and was used for artillery and signals. M.577 colour is olive green.armoured personnel carrier, model, command post vehicle

Bendigo Advertiser "The way we were" from Tuesday, January 25, 2005. Farming: powered up for a day on the farm is Inglewood farmer, Harold Palmer. Harold is photographed in 1947 outside the Inglewood powerhouse. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Heavy, metal, machine with hinged top. Base plate: IBM/Typeno 7500 / 240v 4.3A 500(?) system / No 22539DZ 90 / Made in Germany. Rubber pads at each end and on base. Electric power cable not incuded.IBMibm, electric date stamper

A dark brown wood look plaque with a circular disc of a jet. Above the jet reads Avalon 2013, under the jet reads the power of flight. Writing around the disc Australian International Airshow and aerospace & Defence Explosion.Presented in appreciation to National Vietnam Veterans Museumshield, australian international air show

Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope was designed to meet certain expectations about laryngeal access and to avoid major tracheal injuries in patients (Ball, 2014). Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Flagg laryngoscope handle only. The handle has a serrated grip for easy use; it is also a container for two batteries and has a switch on its base with an ON - OFF switch black button which quite rusty. The handle has a screw on top of it, used to secure the blade. The full piece has minor scratches over its surface. It has a small crack in the switch area and a missing screw bellows it. The handle has an inscription about the manufacturer company seal and name stamped at the top of the handle ring.Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, handle, switch, laryngoscope

Black and white photo shows the weir and Lake King in the Rutherglen Park. The colour photograph is of an ocean liner, the Osterley.Two postcards pasted onto either side of a piece of green cardboard, probably cut from an album. One photo is a black and white photograph. One is in colour.At bottom of black and white photograph: "The Park, Rutherglen" On the top left corner of the colour photograph: "R.M.S. Osterley | 12 129 tons, 14 000 H. Power" rutherglen park, lake king, rms osterley

SEC Buttons used on Regional Tramways UniformsA collection of nine brass, silver plated buttons as used by the State Electricity Commission of Victoria on Tramways uniforms 1921 State Electricity Commission of Victoria, with the Southern Cross on a shield over a clenched fist releasing electric power. On back of button is "Made by Stokes & Sons Melbourne.tram, button, stokes & sons, sec, bendigo

Used for teaching chemistry principles of measuring electrical power.A teaching / demonstration model with large scale and transparent panels. Polished wooden frame. Direct current - moving coil Volt-AmmeterBlack tape on front panel "PHYSICS"chemistry, electrical power, physics, voltmeter, ammeter, direct current, scientific instrument

Switching on of the S.E.C. power supply for Stawell. Sept 1968stawell electricity power

The Institution of Electrical Engineers (IEE) was established on 17 May 1871. The first meeting took place at 2 Westminster Chambers, Victoria Street SW. Those present were Wildman Whitehouse, Capt P.H. Colomb, Maj. R.E. Stotherd, Louis Loeffler, Capt Weber, Capt Malcolm, Robert Sabine, Frank Bolton. Gold paper covered magazine with black print. 239 pages including numerous advertisements. Articles of this centenary edition include: A Human Entity (Lord Nelson of Stafford), Yesterday's Men - providing for tomorrow ((A.G. Woodruff), A century of Development in the Supply Industry (Stanley Brown), British Broadcasting and the IEE (J. Redmond), Telecommunications - the grassroots of the IEE (R.J. Halsey), Engineers, physicists and mathematicians (J.A. Ratcliffe), The IEE Wiring regulations (E.E. Hutchings). The IEE and education (John Brown), Electrical Engineering today and tomorrow. Images include Oliver Lodge, James Maxwell, Crookes shadow tube, Deptford Power Station, John Hopkinson, Marconi, William Thomson, Oliver Heaviside, experimental 3-phase, Belling Modernette, Savoy Hill, power lines, Brighton Power Station, BBC Television Centre London, mobile telegraph office.generators, institution of electrical engineers, iee, wildman whitehouse, ph colomb, re stotherd, louis loeffler, robert sabine, frank bolton, multimeter, power units, oscilloscope, bell and howell

A report - possibly to investors about the performance of the State Electricity Commission of Victoria, in 1959. Reports on power production, brown coal production, opening of the Richmond control room, power sales, number of consumers, new power stations - Morwell and Kiewa McKay Creek. Gives Income and profit details. On the last page bottom right hand corner is a paragraph about the financial loss of the Ballarat and Bendigo tramways and the cost of operation per passenger. Yields information about the SEC for 1959 and tramway losses.Two colour folded publication, four sheetssecv, reports, power stations, electricity supply, tramways, finances

Items in the collection re Clarence Shearing, refer Cat No 7089.16P for his service details.Photographs B & W various sizes of different subjects some with text on rear. Subjects include, troopship, bombing damage, power station, Japanese monument "Tori Gate" destroyed submarine. One has no relevance to the BCOF service."25.4.46 Westralia (Troopship)", "RMS Himalaya passing under Sydney Harbour 1959"photographs, bcof, japan

Horwood Collection. Napoleon Mine Woodward Road Golden Square. Air compressor along side. Markings:Napoleon Ward Ward Rd. G Square. Poppet head on LH side of image. Power lines evident in top of image.Kodakmine, gold, napolean, horwood collection. napoleon mine woodward road golden square. air compressor along side

Photographs taken by ex-employee of Kitchen's, Lionel Hayfield (refer catalogue numbers 3411 and 3412) just before the building sold to "The Block" - a Channel 9 TV program. See also cat nos 3846, 3847 and 3848First floor series of colour photographs taken inside and from the J Kitchen & Sons Administration Building, Ingles St, Port Melbourne. Details where possible are on the back of the photographs. .08 - .18 ; first floor power roomindustry - manufacturing, built environment - commercial, built environment - industrial, demolitions, j kitchen & sons pty ltd

The bomber being restored is the oldest surviving complete Canberra. This plane flew continually from 1951—1973 and was used in both Malaya and Vietnam. It is one of three bombers bought from England before production began at the Government Aircraft Factory at Fisherman's Bend. The plane has the oldest known Rolls Royce Avon engine, being serial number 2.The Canberra is a first-generation jet-powered light bomber which could fly at a higher altitude than previous bombers. It was Australia's first jet bomber. B1 bomber version of the English Electric Canberra. It is being restored by the NVVM.Serial no: A84-307.canberra bomber, air force, bomber, plane

Brought from Japan by Myrtle Bennett on cruise in 1960'sToy television set. Case gold coloured tin with four red knobs on lower right hand side. White plastic insert on left hand side to resemble speaker section. Battery powered ballerina inside 'tube'toys, general

This is an image of the original single storey Royal Hotel building which was on the corner of Brook and Evans Streets. In the 1930s the single storey structure was demolished after a fire and replaced with a double storey Art Deco red brick building, which still stands on the same site.At one stage there were four hotels in Evans Street between Station Street and Brook Street. At some stage the Millett family owned them. The Royal and the Olive Tree (formerly the Railway) hotels remain on their original site but not in their original appearance.A black and white photograph with a cream border of a single storey hotel building with a headlight window on the RHS of the corner entry doorway, which also has lead light windows. A young tree and power pole are seen on the RHS of the image. hotels, royal hotel, s.winter, t. millett

Set of two Negatives and Digital images of the Wal Jack Geelong Negative file of the Geelong 33 at the Beach terminus. The tram has the destination of West. The MESCo built power station is in the background. Photo mid to late 1940's. trams, tramways, geelong, beach, power station, tram 33

Used to hold cards (e.g., bank cards, public transit smart cards, etc.) on the back of a smartphone by sticking to it (or a case) on the palm-facing side. Advertises the RTBU on one side.A recent item advertising the RTBU.Dark blue rectangular card holder with the URL for the RTBU, its logo and slogan ("The power of Union"), and its phone number. All text is printed in white. The opposite side has 3M 300LSE tape that is covered in protective paper.public transport, rtbu, unions

This photpgraph was taken prior to post office upgrade in 1980.|Also enlarged copy 18 x 25.5 cm|This is the before paired photograph used in the 150 year, Lakes Entrance 1858-2008 display.|The after paired photograph number is 01405.1.|Also one 12 x 16 framed photograph used in room display.Black and white photograph showing the front view from Esplanade of Post Office. Power pole, street light and two internal chimneys. Post boxes and weighing machine in alcove to right and Postmasters residence. Lakes Entrance Victoriatownship, postal services, room display

The design of this and other similar treadle powered dental engine (or dentist drill) was in common use by dentists from the 1870’s into the 1920's. When electricity became accessible to most communities the electrically powered dental engines began to take over from the treadle power. Over the ages teeth were extracted using picks and scissors and other gouging instruments. Bow drills, hand drills and even a "bur thimble" drill were later used to prepare cavities for filling. Some drills were made bendable by attaching flexible shanks between the metal bur and the handle, giving access to the teeth at the back of the mouth. Other mechanical devices were introduced along the way, such as clockwork drills, but they were hard to handle and inefficient. Over the centuries “dentistry has been performed by priests, monks and other healers. This was followed by barbers; the barber’s chair may well have been the precursor to the dental chair. “(SA Medical Heritage Society Inc.) In 1871 James Morrison patented the first commercially manufactured 'foot treadle dental engine', the first practica dental engine although others had been introduced as early as 1790 (by John Greenwood). Handmade steel burs or drills were introduced for dental handpieces, taking advantage of the significant increase in the speed of the drill. In 1891 the first machine-made steel burs were in use. The treadle drill reduced the time to prepare a cavity from hours to less than ten minutes. In 1876 the Samuel S. White Catalogue of Dentist Instruments listed a 12 ½ inch wheel diameter dental engine, with 14 bright steel parts, for sale at US $55 In today’s market, this is the equivalent to US $1200 approx. The specifications of that dental engine are very similar to the this one in our Flagstaff Hill Maritime Village’s collection. It is interesting to note that workings of a similar treadle dentist drill were used and modified to power a treadle spinning wheel of one of the volunteer spinners at Flagstaff Hill Maritime Village. The foot treadle dental engine was a milestone in dental history. “Historic importance of treadle powered machines; they made use of human power in an optimal way” (Lowtech Magazine “Short history of early pedal powered machines”) The invention of a machine to speed up the process of excavation of a tooth lead to the invention of new burs and drills for the handpieces, improving speed and the surgical process of dentistry. They were the fore-runner of today’s electrically powered dental engines. This treadle-powered dentist drill, or dentist engine, is made of iron and steel and provides power for a mechanical dental hand-piece that would be fitted with a dental tool. The drill has a three footed cast iron base, one foot being longer than the other two. A vertical C shaped frame is joined into the centre of the base, holding an axle that has a driving-wheel (or flywheel) and connecting to a crank. A slender, shoulder height post, made from telescoping pipes, joins into the top of this frame and is height adjusted by a hand tightened screw with a round knob. On the post just above the frame is a short metal, horizontal bar (to hold the hand-piece when it is not in use). A narrow tubular arm is attached to the top of the stand at a right angle and can move up and down. At the end of the arm is a firmly fixed, flexible rubber hose protected for a short distance by a sheath of thin metal. At the end of the hose there is a fitting where the drill’s hand-piece would be attached; a small, silver coloured alligator clip is also at the end. A treadle, or foot pedal, is hinged to the heel to the long foot of the base, and joined at the toe to the crank that turns the driving-wheel. There is a spring under the toe of the treadle. The metal driving-wheel has a wide rim. Touching the inside of the rim are four tubular rings that bulge towards the outside of the driving-wheel, away from the pole, and all meet at the hub of the axle. The axle is bulbous between the inside of the driving-wheel and the frame then passes through the frame and is attached on the other side. The driving-wheel has a groove around which a belt would sit. The belt would also fit around a pulley on the arm, at the top of the post. The pulley is joined to a rod inside the arm and this spins the drill's hand-piece and dental tool holder. The two shorter feet of the base are made from a long metal bar that has been curved outwards, and its centre is bolted to the base of the pole. Under the ends of the curved legs of the base are wedge shaped feet. The driving-wheel is decorated in light coloured paint on both sides, each side having three sets of floral decals evenly spaced around them, and each about a sixth of the wheel's circumference. Similar decoration is along the sides of the frame. The foot pedal has decorative cutout patterns in the centre of the foot and at the toe. On the long foot of the stand is some lettering with a fine, light coloured border around it. The lettering is hard to read, being a dark colour and flaking off. There are also remnants of fine, light coloured flourishes. The foot pedal has lettering of the maker’s trade mark cast into the metal at the ball of the foot. Lettering on the base is peeling and difficult to read. The foot pedal has a trade mark cast into it that looks like a combination of ‘C’ , ‘S’ , ‘A’, ‘R’. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dentist, teeth, dental drill, dental engine, treadle drill, foot powered drill, treadle engine, orthodontics, dental surgery, james morrison

The Junction Dam and Clover Dam Power Station, stages of the Kiewa Hydro-Electric Scheme, were needed to meet the increased power demands of the wartime industry in Victoria. Clover added 26 megawatts to the grid. Junction Dam was completed and ready to hold water by September 1943, but was emptied in December 1943 and not filled again until May 1944. Construction of Clover Power Station commenced in July 1941 and both turbines were in service by May 1945.Clover Power Station and Junction Dam were part of the Kiewa Hydro Electric Scheme constructed by the State Electricity Commission of Victoria. SECV official photographers took photographs of most stages of construction of the Hydro Electric Scheme and referenced each photo with a number and dating system as an historical record and for reference for other projects. This provided a thorough history of the construction of the Hydro Electric Scheme, some of the workers involved in its construction and the infrastructure supporting its construction, such a Bogong Village.Small light brown cardboard box originally containing sensitized photographic paper, now containing a range of black and white photographs of the Kiewa Hydro Electric System taken by the official SECV photographer Box has some damage – Front panel on lid is missing. Top has a puncture in top right corner and some peeling of paper along sides and at edges. Printed on the top of the box in black ink: OPEN ONLY IN PHOTOGRAPHIC DARK ROOM SENSITIZED PAPER Manufactured by – KODAK (A/asia) PTY. LTD. Melbourne Australia Green and white sticker on right side of lid and bottom right side of box, torn at join 1. 1B1 Single Weight Soft. Available in Soft (1) Medium (2) Contrast (3) Extra Contrast (4) Single and Double Weight Stamped at bottom of sticker in grey ink G8087 CK photographic paper box; state electricity commission of victoria; official photographer; kiewa hydro electric scheme; clover power station; junction dam; bogong village

Used to teach physics students - introduction to principles of electric powerA teaching / demonstration model with large scale and transparent panels. Polished wood frameBlack tape on front panel - "PHYSICS"scientific instrument, physics, electric power, voltmeter, ammeter

People - "Swainston, Jessie" Buildings - "Ellesmere Place, Power Lines"