Carving fork with composition handle.forks, carving forks

Gembrook Pottery was based in Gembrook in the Dandenong Ranges of Victoria. The pottery, run by Ian and Robyn Burgher, was registered as a business from 1987 to 2007. Marks include Gembrook Pottery (impressed), Gembrook Pottery Wirilda (impressed) and Wirilda (painted). Lidded vessel with incised carvingceramics, australian studio pottery

Gembrook Pottery was based in Gembrook in the Dandenong Ranges of Victoria. The pottery, run by Ian and Robyn Burgher, was registered as a business from 1987 to 2007. Marks include Gembrook Pottery (impressed), Gembrook Pottery Wirilda (impressed) and Wirilda (painted). Lidded bowl with incised carving.ceramics, australian studio pottery, warilda, gembrook pottery

Brown, polished wooden carved jar with lid. VietnameseVietnamese characters on the jar with decorative carving on the jar and lidjar, vietnamese, wooden

Inspected by Joanna Freslov, archaeologist 2/6/2008Wooden carving of an animal - possibly a goanna.carving sculpture aboriginal

Domestic Carving Knife with Bone Handlestawell

The Mundy family were farmers / settlers in the Snowy River area since c. 1880s. The original Mundy family moved to a land "selection" at Betebolong in the early 1880's from Buchan. John Mundy grew up in the Orbost district. This item highlights the comparison between today's educational equipment and those of the 1930's.A 15 inch wooden ruler with carvings and holes.On back - J. MUNDYmeasurement ruler mundy-family educational

Made at Camp 3 Tatura in WW2 by internees. The blade is made from a broken cross cut saw and the handle from a broken hickory axe handle.handmade carving knife with steel blade and wooden handlecarving knife, camp 3, tatura, !, domestic, items, food, preparation

This piece is made of a stone called greenstone in New Zealand English, known as pounamu in Maori. Hei-tiki are considered taonga (treasures) by Maori. Stone carving of a Maori hai-tiki. The carving is made of green stone, and depicts a figure with both hands on its thighs and a head tilted to one side, with big eyes.

A honing steel, sometimes referred to as a sharpening steel, whet steel, sharpening stick, sharpening rod, butcher's steel, and chef's steel, is a rod of steel, ceramic or diamond-coated steel used to restore keenness to dulled blade edges. They are flat, oval, or round in cross-section and up to 30 centimetres (1 ft) long. The steel and ceramic honing steels may have longitudinal ridges, whereas the diamond-coated steels are smooth but embedded with abrasive diamond particles. Non-abrasive honing rods such as smooth ceramic or ribbed steel are able to remove small amounts of metal via adhesive wear. In normal use, the rod is applied to the blade at a slightly higher angle than that of the bevel, resulting in the formation of a micro-bevel. The term "hone" is associated with light maintenance performed on a blade without the effort and precision normally associated with sharpening, so the name "hone" was borrowed. In the 1980s, ceramic abrasives became increasingly popular and proved an equal, if not superior, method for accomplishing the same daily maintenance tasks; manufacturers replaced steels with ceramic (and later, manufactured diamond abrasive) sharpening "steels" that were actually hones. Use Honing steels are used by lightly placing the near edge of the blade against the base of the steel, then sliding the blade away from yourself along the steel while moving it down – the blade moves diagonally, while the steel remains stationary. This should be done with the blade held at an angle to the steel, usually about 20°, and repeating on the opposite side at the same angle. This is repeated five to ten times per side. Steeling It is often recommended that steeling be performed immediately before or after using a knife and can be done daily. By contrast, knives are generally sharpened much less frequently. A traditional smooth honing steel is of no use if the edge is blunt, because it removes no material; instead it fixes deformations along the edge of a sharp blade, technically known as burnishing. There has long been speculation about the efficacy of steeling (re-aligning the edge) vs honing (removing minor deformation with abrasives); studies tend to favour abrasives for daily maintenance, especially in high-carbide-volume "stainless" steels (such as the popular CPM S30V steel, which tends to "tear out" when steeled rather than re-forming an edge.) Small honing steel for outdoor activities Usage trends Steels have traditionally been used in the West, especially in heavy-use scenarios (e.g. butchering, where the edge deforms due to forceful contact with bone). These scenarios also lead Western trends toward blades tempered to a lower level of hardness (and thus lower brittleness). In East Asia, notably Japan, harder knives are preferred, so there is little need for steeling intra-day, as the edge does not deform as much. Instead, the blade is honed as needed on a waterstone. While tradition has kept the practice of steeling alive in Western kitchens, the majority of honing steels sold are abrasive rather than smooth, and knives are harder and more frequently made of stainless steel, which does not respond to traditional steeling techniques as well as high-carbon/low alloy tool steels.The sharpening steel is essential to maintain the sharpness of carving and other knives.Steel knife sharpener with bone handle. Part of a carving set.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sharpening steel, carving set, kitchen equipment

From the early days of our race, the knife represented one of the first and most important tools that enabled rise of our technology, military, culture, science and all other things that brought us to this point of modern civilisation. As a vital tool for survival, combat, construction and food preparation, the knife quickly became the most basic tool from which all others were born. In those ancient times, 500,000 years ago, sharpened stones started slowly evolving, becoming more and more like their modern counterpart. Before the time when fire enabled the melting of the various metals, and forging them into modern knives, their stone counterparts received several visual upgrades. Double bladed knives were most popular, and their wooden or stone hilts were decorated with animal skins and feathers. Those knives represented a great deal of pride for the warriors and elders who owned them, and that tradition continued to be practised with the arrival of the Bronze Age. The appearance of metallurgy brought the ability to create knives from softer types of metal. Even though knives from bronze did not provide durability over longer periods of time [easily dulled, and susceptible to corrosion), their sharpness and slim designed proved to be superior to any stone knife tool. As the centuries went on, iron and then steel became commonplace across the entire world. Knives created from those materials were much more durable and easier to maintain their sharpness after prolonged use. During medieval times in Europe, steel metallurgy managed to evolve knives from small single or double-bladed edges to larger sizes - swords, spears and axes. Even with all those advancements, the use of knives as an eating utensil continued to be used in some small circles. Even as early as the 15th century, wealthy circles of people started carrying personal knives, intended for double use - both eating and defending against threats. During those times the host were not obliged to provide their guest with any kind of eating utensil in addition to plates, so wealthy males used their eating knives for cutting their own meals, and the meals of nearby female guests. Slim double-bladed knives were good for cutting and piercing foods. As the use of forks became widespread in the whole of Europe by the late 17th century, most people used this kind of small knife on a regular basis (a combination of two knives, one for stabilising and other for cutting the meal). http://www.eatingutensils.net/history-of-cutlery/knife-history/The knife is one of the most important items that has enabled the development of civilisation over thousands of years.Carving knife with wooden handle and rusted slender metal blade.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, knife, kitchen equipment, dining

Depicts a member of the AMF 8th Employment Co. Made by former camp 2 Tatura internee after his release in January 1942. At the 8th employment company at Tocumwal. Kurt Lewinski was a Dunera boy. Formerly a refugee of England 1938, originally from Berlin. Transported to Australia in 1940.Wood carving or sculpture of a man stacking boxes at a railway station.K. Lewinski 1944 Huon Pine (stained)wood sculpture, internee hand craft, dunera boy, kurt lewinski

Original use unknown. Found underneath the St Martins Anglican Church Hall building when it was moved from Belgrave South Primary School to Belgrave Heights in 1994.Five-sided piece of wood with carvings of vines and a flower at the centre.

Advised this board was displayed at Arbuckle's premises in Cato Street Hawthorn. wooden decorative board with wooden ribbon carvings attached in the cornersEmployees of Arbuckle & Waddell Pty Ltd who enlisted for service in the great war 1914-1919arbuckle & waddell, world war 1, hawthorn war memorials

A fancy red button with a metal carving of Peter Pan on it blowing a horn, the carving seems to be bent slightly to the right. This was discovered by QC Binks whilst he was out metal detecting for gold.bendigo, gold mining, qc binks, peter pan, button.

.1) Greetings from Scottsdale Tasmania depicting wooden carvings of military figurines. .2) Greetings from Scottsdale Tasmania depicting wooden carvings of Simpson & his donkey carrying a wounded soldier.documents - postcards, military history - army

Handmade by Italian Officer in Myrtleford POW Camp and given to Mr J. R. Shale.Handmade carving knife, brass handle, long, wide steel blade.mr j. r. shale, myrtleford pow camp, carving knives

Part of a Wedding present Dinner Service. Used in Australia.Large china carving dish, patterned blue and white, with a scalloped edge.dishes

Gift to Wandin Museum by Mrs. K. Bourke of Hawthorn.Wedgewood china, white carving dish, with black decoration around the rim."Wedgewood & Co. Ltd. England"dishes

Large Wooden Carving Maori Depicting Australian and New Zealand Soldiers The ANZACSwooden carving, maori wooden carving, the memorial pare

When scrimshaw is mentioned, most people think of carving on sperm whale teeth only. But scrimshaw also includes engravings on skeletal whale bone–such as the jaw bone, called panbone–and ivory from other marine mammals such as walrus. Although scrimshaw is widely associated with nautical themes and designs of the 19th century whaling industry, vintage scrimshaw was also produced as tribal art in many cultures. Today, scrimshaw is recognized as a unique medium in which present-day artists have developed their own modern themes. Scrimshaw reproductions may take several forms. There are - New carvings on genuine ivory or bone with the deliberate intent to create an "antique” - New carvings on genuine ivory or bone sold as signed and dated contemporary art - Clearly marked synthetic museum reproductions and mass marketed - Unmarked synthetic replicas Painstakingly carved deliberate replicas are directed towards the scrimshaw collector and seldom appear in the general market. Pieces of contemporary art and museum copies are usually clearly marked and openly sold for what they are. The biggest problems in the general antiques market are the mass produced synthetic reproduction pieces, such as this item, that can be mistaken for the genuine item. The scrimshaw is a modern reproduction of a typical scrimshaw scene and engraved onto a synthetic substance. It has been created as a decorative piece and is currently displayed as a representation of the craft of scrimshaw.Scrimshaw carved on a non-natural material in the shape of a whale tooth. Engraving depicts a grizzly bear with two cubs next to a fallen tree. Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, craft work, carving on bones, whale bone carving, engraving, scrimshaw, carving, reproduction scrimshaw

Tray made by unknown internee in Camp 3.Wooden tray. Two trays donated. Second registration number C8032.Scroll carving at either end. Map of Australia and Aboriginal man carved on body of tray.

Wife of the Rev T D Cairns, Minister of St Andrews Kirk, Mrs Mary Cairns served on the Council of Clarendon Presbyterian Ladies College 1919 - 1949. Her generous guarantee of loans from the Ballarat Banking Company, together with other donations, enabled the Presbytery of Ballarat to purchase Clarendon Ladies College from Mr Kennedy in 1919 for 1500 pounds. Mrs Cairns was an inaugural member of the new Clarendon Presbyterian Ladies College Council, established 1919 and remained on the Council for 30 years. This chair was a personal gift to Mrs Cairns by the PWMU to honour of her long and devoted service to that organisation. Mrs Cairns donated the chair back to St Andrews Kirk where it remained in use until the sale of the property in 2019. Congregation member, Max Harris, kindly arranged the donation of the chair to the school because of Mrs Cairn's long association with Clarendon PLC. Solid wood chancel chair with discreet carving; plaque on front side of back supportPlaque: This chair was presented by the / Members of the St Andrews P W M U / on the occasion of the retirement of / Mrs T R Cairns / from the Presidency of the Branch / after holding that office for more than fifty years / as an acknowledgement of her devoted service / as President / & of their deep personal regard. mrs mary cairns, 1919, st andrews kirk, clarendon presbyterian ladies college

Wooden light tan coloured walking stick with floral embossed carving on top end.

Purchased 1970 in China by Mr. & Mrs. H.N. Lord.One Jade Chinese upright carving with carved links forming chains on a wooden base.carvings, ornaments, objects of vertu

Long bladed knife with end broken. Ebony handle. Possibly a carving knife. Length 320mmflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village