This coat would have been part of a St Johns Brigade ambulance uniform. The buttons were made by A J Parkes, who manufactured buttons for the Australian Defence force. A J Parkes began manufacturing plastic injection moulded buttons from the early 1980's which suggests that the coat would have been made and worn during the late 20th century.This item is representative of a particular piece of uniform that would have been worn by a member of the St Johns Ambulance Brigade. It has historic significance as an item dating to the late 20th century which may have been used in the service of wounded military personnel. It also has some areas of staining which could have been coused by contact with blood. This could potentially be useful for scientific research purposes.Off white knee length coat with long sleeves. There is an epoulette on each shoulder and pointed collars. There is a deep waist pocket on either side of the coat. There is one silver plastic button at the top of each pocket. These have the St John Ambulance symbol on the front, which consists of an eight pointed cross, with two very small lions and two very small unicorns nestled in the corners of the cross. These motifs are surrounded by the words "THE ST JOHN AMBULANCE BRIGADE". The epoulettes are fastened with one identical button each. Underneath each epoulette there is also a clear plastic button attached the shoulder seam. Each sleeve has a 36mm long cuff which is fastened with one St John Ambulance Brigade button each. There are 10 clear plastic buttons that fasten the entire front of the coat. The back has two pleats commencing near the nape of the neck. The back of the collar on the interior seam has a label which has been cut and shows only a small amount of detail. Printed in faded blue on the label is: "E.R. TIMMINS".military, coat, st johns brigade, uniform, ambulance, st johns brigade ambulance, st johns

Standard West German uniform item for the periodOlive drab woollen forage or side cap with cotton liner. Olive diamond-shaped backing with yellow,red,black embroidered rosette cap badge. Manufacturer’s off-white label sewn to lining.Label inside cap - BAMBERGER MUTZEN-INDUSTRIE (red lettering). US12d/01/07897/001/3 VII/63 _15.12.63 55 8405-12-137-6563forage, german, cap, bamberger mutzen industrie

Post Vietnam sample uniformJacket and trouser set, camouflage drill uniform, tan, brown and green in colouruniform, camouflage

It is a woolen khaki green great coat, with inter shoulder lining of khaki green canvas. There are back belt loop holes in the interior, lined by the same canvas. The pockets are made of the same canvas and are not sew to the interior of the coat at the bottom. The insides of the sleeves are lined with a more beige khaki green material. There is a split flap that is 500mm long in the middle at the bottom of the coat, which is fixed shut with two brown plastic buttons and a metal hook and eye at the bottom. The construction of the jacket is four panels and has been taken in at the waist for form above both pockets. The jacket has a back pleat from below the triangle stitching below the nape of the neck. The back belt has three metal insignia buttons, and the backside is lined with canvas. On both shoulders, there are epaulettes which have one metal insignia button each. On the front, there are three metal buttons on each on flap, and when the jacket is done up, the left flap goes on top. It has three button holes on the left flap and one button hole on the right flap for a large brown button on the inside of the left flap. There are two outer pockets on either side of the jacket. Beneath the jacket lapels, on either side there are metal buttons, and there are button holes for them in the middle of the bottom lapel. Where the upper and lower lapels are split, there is a hook and eye. There is a brown plastic button on the underside of both the upper lapels, which is where the extra flap of fabric on the inside of the left jacket flap, can be fixed as a face protector. The tag on the inside reads; DAVID KLEIN PTY. LTD. Victoria 1967 An arrow (Department of defence symbol) SIZE 6 CLASS 8405 66.012.0494 REGIMENTAL NO................... NAME......................... The regimantal number section had a number filled in but then scribbled out and another number written above, which is 359282. The name section was filled in with B.R.MIER. The name and regimental numbers were done in black marker pen. All the metal buttons are decorated with the medical corps symbol, which is a serpent-entwined rod (Rod of Asclepius) surrounded by a laurel wreath and above the rod is a crown (St Edward’s Crown). On the outside of the upper sleeves, just below the shoulder, there is two patches that signifies the rank of Staff Sergeant. The top patch is an embroided St Edward’s Crown and represents the staff rank. It is 47mm wide and 45mm. Below this there is a patch depicting the three stripes/ chevorns of the sergeant rank. The chevorn’s points face down, and the sides measure 66mm, while the depth down to the point is 86mm. The bottom lengths is 100mm on both sides and the top lengths are 9mm. coat, trench coat, great coat, medical corps, staff sergeant, b.p. mier, 359282, david klein pty. ltd., 1967

Post Vietnam sample uniformJacket, camouflage drill uniform, tan, brown and green in colouruniform, camouflage

Trousers, camouflage drill uniform, tan, brown and green in colouruniform, camouflage

Associated with the service of Lieutenant H. Dixon, circa 1943. Worn by people who served on the Home Front in this Corps during the Second World War.This item is significant because Australian Army khaki woollen service dress jacket with red embroidered circular Unit Colour Patch on the top of each sleeves consistent with markings of Australia's home guard – the Volunteer Defence Corps (VDC). Four button down closure. The jacket is fully lined with a lightweight fabric, either natural or synthetic. A self fabric belt passes around the waist and fastens with a buckle at the front. Button down epaulettes with two pips denoting lieutenant ranking. 'Rising Sun' collar badges on each lapel. Pleated breast pockets with triple pointed flaps with exposed buttons. A pair of pockets over each hip with straight flaps each fastened with one visiable button. Pockets over hips have one Four front pockets are fastened with one visible buttton. These 8 buttons are domed metal showing a raised emblem of Australia surmounted by the King's Crown: also see Tudor Crown or Imperial Crown. The back of these buttons have a loop shank, secured with cotton. Surrounding is a stamp K. C. LUKE PTY LTD. MELB. There is a small pocket on the inside of the jacket corresponding to the right breast pocket.Small, white, rectangular manufactures tag stiched with khaki coloured cotton within the small pocket on the inside of the jacket corresponding to the right breast pocket. Approximately H 24mm x W 44m The MYER STORE for MEN MELBOURNE & ADELAIDE Typed in red ink on the bottom section of the manufacturers tag. Lt. H. Dixon W. 7290. 10/12/43.heraldry, uniform, volunteer defence corps

Military cap dating from 1966, possibly worn by military personnel in West Germany.This cap is significant as an example of military headwear dating to 1960’s West Germany. Olive drab coloured forage or side cap lined with matching colored fabric. Cap has a flap on each side which may be unfolded. Side flaps are joined by by strip of fabric (all one piece), across the front of the cap which when extended, may form a covering for the mouth area. Flap may be secured with a silver stud button attached to each side of cap. Front of cap displays West German roundel in black, red, and yellow set in olive coloured diamond shaped piece of fabric. Off-white manufacturer’s label on inside, sewn to lining with white thread. Cap is size 54. On inside of hat: (in red) BAMBERGER MUTZEN INDUSTRIE (in black) US12d/22/15565/0028 IX/1966 /5 54 8405-12-138-8897

This Army Driving Licence was issued to Ernest James Richard McDonough. He served with Detachment A Squadron 3 Cavalry Regiment and 1/15 Royal New South Wales Lancers. Born 1925 and Died 31 November 2001. He served with 3 Calvary Regiment in Vietnam.A follow up Army Driving Licence held by 36970 Ernest James Richard McDonough who served with 3 Calvary Regiment during he Vietnam War.A white sheet of paper mounted on a dark tan cardboard and cloth cover. Australian Military Forces Army Driving Licence No. 56115. Issued to 36970 WO2 Ernest James Richard McDonough. The previous ranks of Sergeant and Staff Sargeant have been crossed out.Transcribed from AAF G11 No 42700. Details of vehicles qualified to drive, date, testing officer, Unit and Signature of Issuing Officer. mcdonough, 36970, aafg11

PERSONAL TRUNK OF CAPTAIN PETER SPENCER HAYMAN MCThis trunk was owned by Peter Spencer Hayman, who was regarded as a ‘Tobruk hero’. Hayman was the son of a Bank manager, Spencer Lewis Hayman and Agnes Lindsay Hayman. He was born in Exeter S.A. on 23/11/1916. He enlisted in the Australia Army at the age of 23 on 13/05/1940. His service number was VX14987. Hayman was a leader of a fighting patrol and served in multiple sites in Syria and Lybia. During his service in Lybia he lead his campaign through great difficulty and bravery in Tobruk. Although wounded by a grenade, he continued to lead his men into an enemy stronghold until resistance from a joining post compelled him to break off the engagement. He successfully brought his party back with very few casualties. Hayman was awarded the military cross in 1941. He was a Lieutenant when awarded, and was made captain of the 2/24 Australian Infantry Battalion shortly afterwards. He was killed in action on the 11/07/1942 and is buried in the El Alamein war cemetery. His father was flown to London to receive the medal. The inscription on his headstone reads; “Beloved son of Spencer and Agnes Hayman of Bendigo” (AII.A.21. – cemetery/memorial reference number). As an item owned by a ‘Tobruk hero ’ who was awarded the eminent military cross for bravery, ‘forceful leadership’ and ‘splendid courage’, this trunk is of national historic and social significance. It also has great interpretive capacity as an item that speaks of an impressive military story. Standard Army issue trunk. 88cm L x 51cm W x 33cm D. Dull grey in colour. There is provision for a tray to be fitted just under the lid. This tray was the same physical size as the trunk. The base has 2 cleats (88cm x 5.5cm), made of timber, to keep the trunk off the ground. An additional hasp and keeper have been fitted (near the centre of the lid) to hold it shut. The original type lock needed a key and were not very serviceable.P S H VX14987 408

French army accoutrements, as part of uniform allocation.Army green (dark) wrap-around neck warmer, wool and elastin blend (?), rib stitch, two tags stitched into interior end, one which reads 'Antimite Definitiv' (Anti-Moth)' the other reads 'T.M.P AMIENS'. Overlock stitched at both ends.Two tags stitched into interior end, one which reads 'Antimite Definitiv' (Anti-Moth)' the other reads 'T.M.P AMIENS'.neck warmer, tour de cou, snood, uniform, the french armed forces

Sterile field wound dressing as issued to Australian military forces in the latter part of the 20th century.Sterile wound dressing in sealed, rectangular, olive drab fabric pouch, containing a pad with confroming badage. Small triangular shape cut from face side left to aide tearing open. Manufacturing details are printed in black text on the front and directions for use on the back. Irregular shaped black-brown stain on back.Front text - all capitalised: (Arrow symbol) To open tear here Sterile field wound dressings (Compressed for field use) (Three-pronged symbol) 6510-66-108-410 CAPO 7870026AC Multigate reorder: 30-338 Radiation sterilized (American spelling) in Sydney Australia Mulitgate (stylised logo) (symbol of Commonwealth star, a kangaroo and the southern cross) Multigate medical products pty ltd (Text printed sideways) D O M 10/07/1997 (Symbol of B in a circle) 270701 Back text - all capitalised (Printed in a rectangle outline) Directions for use 1. Retain outer bag 2. Remove dressing frm inner bag 3. Grasp bandage & pull pad open 4. Place face of pad onto wound 5. Place outer bag on the other face of pad & bandage 6. Tie or pin bandage * Do not handle wound or pad*wound dressing, medical, heraldry, personal equipment

North Vietnamese NVA Pith Helmet worn by 'the communist Viet Minh and later the People's Army of Vietnam of the North' (sourced from Wikipedia 10.02.2020 Representative of NVA uniform designated during the Vietnam War.Green pith helmet, fiber mould with cloth adhered to exterior and painted interior. Band and trimming on exterior in same green and button at top. Features NVA insignia at front, and has four ventolation holes on sides. Interior has intact suspension straps in grey blue and chin/helmet strap in brown with silver coloured buckle.NVA insigniahelmet, uniform

The Flying Log Book was used by A315699 Lindsay William Fankhauser from qualifying as a helicopter crewman on 9 Dec 66 until a new Flight Log Book was issued on 15 Feb 74. The Lindsay Fankhauser lived in Gisborne and was a member of the Vietnam Veterans Association based at Woodend RSL. The Flying Log Book provides a complete record of Lindsay Fankhauser including flying hours, qualifications, annual reports, photographs of crew and aircraft from 1966 until 1974.Blue book held within a brown leather bookcover. Book cover closed with Velcro Strip. Blue book containing flight information, qualifications, posting locations, pasted in photographs. Brown cover with indentity label with name of owner enclosed in plastic cover. Blue book mounted in middle of brown cover with cover closed by overlapping.Blue book - FORM A.73 (June, 1938). Royal Australian Air Force. Observer’s Air Gunner’s and W/T Operator’s Flying Log Book. Name FANKHAUSER.L.W. (on a dymo label). Leather Cover - Aircrew wings for Aircrew members (wreath of wattle surmounted by crown, letter C inside wreath, single wing on right hand side) /LINDSAY FANKHAUSER/ RAAFfankhauser, raaf, flying log book, vietnam, a.73

An example of military accoutrement. Well worn small dark brown leather purse with press stud button and envelope style flap opening. The ‘female’ element of the press stud has come loose from the leather but is still connected to the ‘male’ element of the press stud. military accoutrements, wallet, purse

The base of of candlestick holder is in the shape of a swastika. The stem of the candlestick holder has a concave curve. The holder has a flat lip around the top. The base and the holder are screwed together. There are three lines engraved around the holder/cup. There is also a line engraved on top of the lip. candlestick, swastika, nazi, decoration, memorabilia

Representative of military issued accoutrements, possibly Australian Army, late 20th Century. Army water canteen, possibly Australian Army issued, with olive green fabric insulating cover featuring flaps with stud fasteners, black twist top lid attached to aluminium body fixed by aluminium chain that is attached both to base and top of lid. Back of fabric cover has a metal prong threaded through a strong fabric loop which has been sewn on for attaching to a belt. Tag on back sewed on which reads 'Made in Japan'. flask, canteen, military, military accoutrements

Representative of military issued accoutrements, possibly Australian Army, late 20th Century. Army water canteen, possibly Australian Army issued, with olive green fabric insulating cover featuring flaps with stud fasteners, black twist top lid attached to aluminium body fixed by aluminium chain that is attached both to base and top of lid. Back of fabric cover has a metal prong threaded through a strong fabric loop which has been sewn on for attaching to a belt. Tag on back sewed on which reads 'Made in Japan'. flask, canteen, military, military accoutrements

A rare example of a Type D Survival Knife issued to British RAF during the latter part of WWII.Heavy duty survival knife with single edged oval shaped broad blade and wooden handle contoured for grip. Two large screws secure the grips. The pommel end has a wrist cord hole (cord not present). See also item 2020.000034-2 (leather sheath). Blunt end of blade near grip there is engraved '27C/2360', reverse side is the makers mark 'Rodgers Sheffield England'.british airforce, survival knife, ww2, wwii, type d

Example of Australian military battledress Jacket - Battledress of olive drab fabric. Jacket is short, and designed to be buttoned to the outside of high-waisted wool serge trousers. An olive green band with two button holes is attached to the inner lower band. The jacket has a fabric belt across the front, with a buckle. Two rectangular pockets extend beneath the lapels. Inside of jacket has a sewn on, rectangular identification label, and size label. Jacket has four buttons down side front, and one near lapel. Each cuff has a button.Identification label on inside of jacket (black ink): REGIMENTAL No NAME Size label (red ink): M. TX SIZE 17 Faint mark on inner neck lining in red marker, possibly Kbattledress, jacket, military, uniform, outfit, fashion, world, war, australian.

A rare example of a Type D Survival Knife leather sheath issued to British RAF during the latter part of WWII.Burgundy stained thick leather knife sheath, folded over blade length and secured with stitching and studs, above sheath there is a belt loop, secured with three silver coloured studs at base. At top of the belt loop there is an additional attached loop for securing grip of knife with press stud. See also item 2020.000034-1 (survival knife). british airforce, survival knife, wwii, type d, ww2, sheath

It is a green helmet, in the shape of a kettle hat. It is a tin hat or Brodie helmet. It is On the chin strap, there are the initials C.G.H and the service number V156143. There are size stamps on the back of the suspension webbing as well as on the underside edge of the helmet. The size is 7 1/4. On both chin strap luggs, it is engraved with MKIII 1941. On the inner lining under suspension lining it is marked with 7 1/4 L.P.L 3/42. helmet, world war 2, colin gordon hopkins, v156143, vx119387, bandiana, shell