Reproduction slide of a photograph of a cable tram, eastbound to Northcote in Bourke St during 1930s about to pass over track work under repairs. The woodblocks have been removed on either side of the track.Demonstrates tramway operations during trackwork - a flag can be seen on the left hand side of the photo.Kodachrome cardboard duplicate slide - Black and white - reproduction - Northcote cable tram track work - 1930s "CB13" in penciltrams, tramways, cable cars, cable trams, bourke street, trackwork

Used by a cable tram conductor to record the number of 2d fares collected from passengers. The Bell punch recorded the number of times a hole was punched in the slip. They were used by the cable trams until the mid-1920s when they were phased out and replaced by "flimsy" paper tickets. The item has been punched many times. Printed for the Tramway Board (1916 to 1919). Has space for 44 journeys. On one side, has space for the name Line, Date, Badge, car, time of starting, and signature, if a student conductor. Printed for use in the down direction. See item 7425 for an example in the Up Direction.Demonstrates a Cable Tram tram Conductors record of the trips sold/fare collected.Ticket - Trip Slip - cable tram Bell Punch type - grey card, 2d fare.See abovetrams, tramways, tickets, cable trams, bell punch, tramway board, tb

Negative of a cable set in Lonsdale St crossing Swanston St, possibly on the last day of operation 14/4/1939. Trailer 286. Has in the background Worthmore's Shoe Store and Denyers depot or store. In Swanston St is a W2. Photographer could be Wal Larsen based on negative size - see Reg Item 5064.Written on rear of album print - "Cable and electric trams at corner of Lonsdale and Swanston Sts."trams, tramways, cable trams, lonsdale st, swanston st, tram 286

Standard Telephones and Cables Ltd (later STC) was a British manufacturer of telephone, telegraph, radio, telecommunications, and related equipment. The company was based in the United Kingdom but also had an operation in Australia, which was acquired by Alcatel Australia in 1987STC Electric Iron with original pacakging and Warranty.Box: Product of Standard Telegraph and Cables Pty Ltd. 252-274 Botany Road, Alexandra, Sydney, NSW.iron (electric), stc, standard telephones and cables ltd

Section of worn cable tram wire rope. One of the two ferrules has been engraved with "243 Weeks 341591 Miles" and the other "ANTD 12 Weeks" - "ANTD" is thought to be an abbreviation for anticipated. On this basis, the cable rope lasted 20 times its expected life! Demonstrates a worn cable tram wire rope that has been sampled and its use recorded.Section of worn Melbourne cable tram wire rope with engraved retaining brass ferrules on each end consisting of seven wound (12 wires) around a central fibre core.See contexttramways, cable trams, cable ropes, cables, mmtb

Reproduced photograph, sepia toned of "Flinders St Railway Station, World War 1 Era, taken from St Paul's Cathedral steps. Has part of the Princes Bridge Station building on the left hand side. The Swanston St canopy of Flinders St station has the words "Enlist and Fight for the Dear Old Flag". Two Richmond line cable trams in Flinders St along with horse drawn vehicles. One of a series of four photographs produced by an unknown person/company. Two sizes of prints held, one large, two small. See also Reg Item 1883 for a 1944 photograph.On the rear of 587 "Cable Tram prints $10/set"trams, tramways, melbourne, flinders st station, world war 1, cable trams

Used by a cable tram conductor to record the number of 2d fares collected from passengers. The Bell punch recorded the number of times a hole was punched in the slip. They were used by the cable trams until the mid-1920s when they were phased out and replaced by "flimsy" paper tickets. The item has been punched a number of times. Printed for the Tramway Board (1916 to 1919). Has space for 32 journeys. On one side, has space for the name Line, Date, Badge, car, time of starting, and signature, if a student conductor. Printed for use in the up direction. For an example for the Down direction and larger, see item 3335.Demonstrates a Cable Tram tram Conductors record of the trips sold/fare collected.Ticket - Trip Slip - cable tram Bell Punch type - manila coloured card, 2d fare.tramways, tickets, cable trams, bell punch, tramway board, tb

Used by the MMTB as a Transfer ticket from cable to electric trams. Enabled the passenger to pay one 2 1/2d fare rather than two separate fares. Printed for week day use only. See item 7410 for a 2d example.Yields information about tickets used on Melbourne Trams in the 1920sPaper cable tram tickets - 2 1/2d No. 260710 - red ink on a light red paper.trams, tramways, mmtb, cable trams

A souvenir from one of the last trams to Port Melbourne. Both the South Melbourne and Port Melbourne cable lines closed on this date. The South Melbourne line was converted to electric traction; the Port Melbourne line was replaced by a bus service. See item 7595 for another bell cord from the same event.Has a close association with the closure of the Port Melbourne cable tram line.Bell cord - for a grip car bell - consisting of a wooden turned handle fitted with a screw at the bottom, a length of sash cord and a cast iron end to which the rope has been glued or fastened into and a hook that went on the underside of the bell itself. On the wooden handle is a label - "Cable tram cord taken from the last tram to run in Port Melbourne"trams, tramways, cable trams, grip tram, gripmen, bell, port melbourne, last tram, closure

Photographs, Black and White, Photo of Elizabeth St, to the north of Collins St looking south towards Flinders St and Flinders St Station. Has a bogie cable trailer in the view, along with other cable trams, horse drawn vehicles and many pedestrians. In the background is Royal Bank, Craig Williamson, Sargent's Cafe and R. White on the corner. The photograph has a serrated edge.In ink on the rear: Keith Kings stamp and number S-A-449 "Melbourne - Elizabeth St, looking south over Collins St. About 1900. Note Bogie Cable Trailer"trams, tramways, elizabeth st, collins st, cable trams

Manufactured tool for use by one of the Melbourne cable tram operators, most likely the Melbourne Tramway and Omnibus Co, to stamp leather satchels and other items that had to be marked. See item 7678 for a "RICHMOND" stamp. Was extensively used given the deformation at the top of the punch.Demonstrates a steel tool to stamp markings onto leather or other objectsTool - forged steel and hardened to stamp the word "CABLE". Has manufacturer's name and location on the sides stamped in,"Makers W Willis & Co, Collins St West Melbourne" stamped in on the sides.tools, mtoco, stamps, metal stamp, tramways, cable trams

Of particular interest is the "spade nosed" round used German aircraft in an attempt to cut the retaining cables of reconnaissance and barrage balloons used by British forces 3 rounds Of particular interest is the "spade nosed" round used German aircraft in an attempt to cut the retaining cables of reconnaissance and barrage balloons used by British forces

Photos shows Collins St looking east from near Queen St, at the time the financial hub of Melbourne. The nearest cable tram set has a destination of Port Melbourne. The sign for the Reuter's (financial reporter) is visible. The photo has the public library of Victoria stamp and is dated 10 May 1909.Yields information about the buildings in Collins St about 1909Photograph of Collins St looking east from near Queen St with two cable tram sets.On rear in ink: Melbourne – Collin St eastwards from, Queen St (Public Library of Victoria stamp – 14/5/1909” Copy neg Mark Plummer collections ex late John Alfred collection. cable trams, melbourne, collins st, tramways

Cable tramway report form for providing extensive details of a conductor's trip, driver, badge and punch numbers, times, tickets sold, relieved by and ticket sales, tokens, packets of tickets and who received the cash and form. Dated 10/23 indicating it is a MMTB form. Three copies held, one of which has been partly filled in to provide an example.Demonstrates a cable tram conductor's trip form or revenue journal.Cable tramway - Trip report printed on brown paper - one copy with sample figures in pencil.timetables, tramways, cable trams, mmtb, conductors, revenue journal, tickets

Map showing the Melbourne cable tram system, with a list of opening and closing dates for the various lines, opened by the Melbourne Tramways Trust. Shows engine houses and car houses (or depots), location names, railways, and a scale. Includes notes on other dates tracks were changed and the Northcote to Clifton Hill line. No marks as to who prepared the map.Yields information about the Melbourne Cable Tram system.Foolscap sheet - Map - Melbourne cable tram system showing tracks, car houses and engine houses.Has a date stamp 22 Apr 1971 in bottom right hand corner.tramways, cable trams, trams, map, melbourne tramways trust, mtt, engine houses, depots, car houses

Photograph shows a former Melbourne cable tram dummy or grip car placed on the ground without its wheels and in use as a shelter, near the Eaglehawk tram terminus, Feb. 1941. Photo by Ken Train.Demonstrates the use of former Melbourne cable tram dummy or grip cars as a low cost shelter.Photograph - black and white with typed notes on rear.9/2 4I. Old cable tram dummy, near Eaglehawk tram terminus, Bendigo." Ken Magor stamp with "per K Train".cable trams, grip car, dummy, shelters, eaglehawk, bendigo

Photograph by C A Ratten of a cable tram set - bogie car No. 472, Sydney Road, c1910. This photograph is featured in the Museum's March 2022 issue of Bellcord - page 10 which provided the story of A C F Lewellin Mechanic located in the building behind the tram. Based on the buildings the photo was able to be dated to be between 1909 and 1911. The tram is photographed just to the north of the Brunswick Tram Depot. Yields information about trams used in Sydney Road BrunswickBlack and white print of cable tram set - bogie car No. 472, Sydney Road, c1910trams, tramways, cable trams, tram 472, sydney road, brunswick, bogie trailers, a c f lewellin

Negative of a cable grip car being hauled by a tractor (in or out) of the South Melbourne tram depot or car sheds. Has the grip in the removed position. In the background is a hotel and a petrol or service station - out of focus. The grip car has the destination of Collins St on the front and "Connects with Collins St electric cars" on the side. Photographer could be Wal Larsen based on negative size - see Reg Item 5064.Written on rear of album print "Tractor hauling cable dummy out of South Melb. Sheds."trams, tramways, cable trams, south melbourne depot, grip tram

"The passing of the Melbourne Cable Tramways", featuring photographs of first cable tram, Fitzroy power house, cable trams in the street, Nicholson St, the No. 1 tram entering the National Museum, some historic notes on the construction of the system, its operations, MMTB takeover, a drawing of the grip and of the badges and buttons used and an image of the cable used. Notes that it was compiled by A. R. Turnbull with co-operation of F. King, K.L.Mackenzie and H. G de Mamiel. Original poster prepared by the MMTB and presented to the State Library or the Museum of Victoria at the time of closure. See Reg Item 6367 for another photograph and 6368 for another poster of the time - Melbourne tramways past and present posterYields information about the Melbourne cable tram system and its history. Frame - wooden outside painted white, glazed with clear glass, off white card backing with brown paper on rear, brass wire hanging wire with small eye hooks the side., containing a photo titled "The passing of the Melbourne Cable Tramways"tramways, cable trams, melbourne, tramcars, closure, museums

35mm Kodak white cardboard colour slide by Keith Kings of Alf Twentyman's preserved cable tram set at his Northcote home, grip 436 and trailer 586 9/3/69.Keith Kings stamp and number "47-2", with details of exposure. "MMTB cable grip car 436 and Trailer 586 Alf Twentyman's Northcote. 9/3/1969.trams, tramways, cable trams, preserved trams, northcote, tram 436, tram 586

Demonstrates the nature of working of the horse trams in Ballarat when at times three horses were required to take trams from Grenville St to Lydiard St. Yields information about the dress of Gentlemen at the time and the buildings behind the tramcar..Black and White photograph of North Sydney cable tram trailer, No. 1, side on view. From the CB Thomas Collection and published in Sydney tram books. Hi Res of image added 15/7/2014. On rear in ink, cropping marks in the top edge. Along the bottom edge "Trailers of this type were converted to electric cars for the Electric Supply Co. of Victoria tramways in Ballarat. The trailers were from the North Sydney cable try of the early 1890's" and "Nth Sydney cable trailer No. 1, Late CB Thomas collection". "KM2" and a blue sticker with "9" written on it.trams, tramways, cable trams, sydney, esco, tram 1

Black and white photograph of cable trailer 88 being loaded onto a wagon at the Spencer St / Flinders St railway yard by the railway yard travelling gantry crane. Trailer lettered M&MTB. Has a man riding the top of the car before being loaded into a I type open wagon. Photo mid to late 1920s? Photo from the Collection of the Department of Infrastructure now with the Public Records Office - image number "Box 108-1. Note: this photo is now out of copyright and may not have been an original VR photograph, but one copied from another source and collected as their Heritage series. The building in the background in Flinders Street (extension/west.) is the former Melbourne Harbour Trust Officers. By the time of this photo was taken the building was in the hands of the Department of Agriculture. Their name can just be seen on the top part of the building. It was demolished when the convention centre was built beside the WTC in the mid-1980’s. The crane was dismantled in the late 1990s around the time of the No 1 goods shed was moved to Bylands. The cable car has been stripped of a number of parts : Some windows. All the brake rigging and pawls All the roof-mounted destination boxes. The wheel skirt.Shows how redundant cable trams were sold and transported to country locations.Photograph - Black and White - Loading cable car trailer 88 at Spencer StHas Department of Infrastructure copy right stamp on rear and number "Box108-1" in ink on rear and "1-8"tramways, trams, cable trams, flinders st, sale of trams, railways, tram 88

Black and white photograph of a cable tram set in Lonsdale St at William St with the Supreme Court or Melbourne Court houses in the background. The electric tram has been built in William St. late 1925 and 1931In ink on rear. "Lonsdale & William St / West Melbourne cable tram taken by Miss H Fergus between late 1925 and 1931. Harry Williams Family Collection"trams, tramways, cable trams, lonsdale st, william st, supreme court

The rocket rescue crews used a sand anchor at a beach rescue site to weigh down the rescue apparatus. The crew would connect the steel cables to the connecting cable and then join heavy ropes or chains to the connecting cable. They would then bury the anchor in a trench about three-quarters of a metre deep, keeping the connecting cable’s end free. The length of heavy rope or chain was attached to a pulley block onto the heavy hawser line. The block and a crotch pole were used to keep the hawser line high and taught, keeping the survivors above the sea as they were hauled to shore on a line or in a breeches buoy. Saving lives in Warrnambool – The coastline of South West Victoria is the site of over 600 shipwrecks and many lost lives; even in Warrnambool’s Lady Bay there were around 16 known shipwrecks between 1850 and 1905, with eight lives lost. In 1859 the first Government-built lifeboat arrived at Warrnambool Harbour and a shed was soon built to house it. In 1858 the provision of rocket and mortar apparatus was approved for lifeboat stations in Victoria, and in 1864 a rocket house was built to safely store the rocket rescue equipment. In 1878 the buildings were moved to the Breakwater area, and in 1910 the new Lifeboat Warrnambool arrived with its ‘self-righting’ design. For almost a hundred years the lifeboat and rocket crews, mostly local volunteers, trained regularly to maintain their rescue skills. They were summoned when needed by alarms, gunshots, ringing bells and foghorns. Some became local heroes but all served an important role. By the end of the 1950s, the lifeboat and rescue equipment had become obsolete. Rocket Rescue Method - The Government of Victoria adopted lifesaving methods based on Her Majesty’s Coast Guard in Great Britain. It authorised the first line-throwing rescue system in 1858. Captain Manby’s mortar powered a projectile connected to a rope, invented in 1808. The equipment was updated to John Dennett’s 8-foot shaft and rocket method that had a longer range of about 250 yards. From the 1860s the breeches buoy apparatus was in use. The apparatus was suspended on a hawser line and manually pulled to and from the distressed vessel carrying passengers and items. In the early 1870s Colonel Boxer’s rocket rescue method became the standard in Victoria. His two-stage rockets, charged by a gunpowder composition, could fire the line up to 500-600 yards, although 1000 yards range was possible. Boxer’s rocket carried the light line, which was faked, or coiled, in a particular way between pegs in a faking box to prevent twists and tangles when fired. The angle of firing the rocket to the vessel in distress was measured by a quadrant-type instrument on the side of the rocket machine. Decades later, in about 1920, Schermuly invented the line-throwing pistol that used a small cartridge to fire the rocket. The British Board of Trade published instructions for both the beach rescue crew and ship’s crew. It involved setting up the rocket launcher on shore at a particular angle measured by the quadrant, inserting a rocket that had a lightweight line threaded through its shaft, and then firing it across the stranded vessel, the line issuing freely from the faking board. A tally board was then sent out to the ship with instructions in four languages. The ship’s crew would haul on the line to bring out the heavier, continuous whip line, then secure the attached whip block to the mast or other sturdy part of the ship. The rescue crew on shore then hauled out a stronger hawser line, which the ship’s crew fixed above the whip block. The hawser was then tightened using the block on the shore end of the whip. The breeches buoy and endless whip are then attached to the traveller block on the hawser, allowing the shore crew to haul the breeches buoy to and from the vessel, rescuing the stranded crew one at a time. This sand anchor is part of the rocket rescue equipment and is significant for its connection with local history, maritime history and marine technology. Lifesaving has been an important part of the services performed from Warrnambool's very early days, supported by State and Local Government, and based on the methods and experience of Great Britain. Hundreds of shipwrecks along the coast are evidence of the rough weather and rugged coastline. Ordinary citizens, the Harbour employees, and the volunteer boat and rescue crew, saved lives in adverse circumstances. Some were recognised as heroes, others went unrecognised. In Lady Bay, Warrnambool, there were around 16 known shipwrecks between 1850 and 1905. Many lives were saved but tragically, eight lives were lost.The sand anchor comprises a plank with steel cables and a connecting cable. The rectangular wooden bevelled-edged plank with two pairs of square metal plates bolted through it. Each metal plate has an eyelet and the two steel cable lengths are permanently attached by their eyelets to the plates. The eyelets at each end of the cable lengths are reinforced with rope work and one length also has a ‘U’ bolt shackle connection. The steel connecting cable also has reinforced eyelets at both ends. The plank has a black stencilled inscription on the upper surface. Stencilled in black paint "ANCHOR" "BACKER"flagstaff hill maritime museum & village, flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck, life-saving, lifesaving, rescue crew, rescue, rocket rescue, maritime accidents, shipwreck victim, rocket crew, beach rescue, line rescue, rescue equipment, rocket firing equipment, rocket rescue equipment, rocket apparatus, beach apparatus, breeches buoy, rocket house, rocket equipment, rocket launcher, rocket line, marine technology, beach rescue set, traveller, block, running block, pulley, hawser, faked line, lady bay, warrnambool harbour, port of warrnambool, volunteer lifesavers, volunteer crew, breakwater, rocket rescue method, rocket rescue apparatus, shore to ship, rocket apparatus rescue, stranded vessel, whip line, endless whip, harbour board, sand anchor, rocket set, anchor backer, rescue anchor, beach anchor, backer, anchor, steel cable, wire cable, connecting cable

Same layout as plan at B91.0471, but showing PMG cables, and buildings existing, proposed and temporary or for demolitionPlan showing layout of PMG cables and PMG plant. Area bounded by Swan St., Yarra Boulevard, orchard, vegetable garden, market garden and S.W. Boundary to Stockman's Cottage. PMG layout handwritten. On same plan as B91.0484 (original) and B11.0383.burnley school of horticulture, orchard, gardens, vegetables, stockman's cottage

Postcards, all featuring the cable tram era, left to right, top to bottom: 1 - Town Hall Melbourne - damaged paper 2 - General view of Collins Street Melbourne - from Spring St looking west 3 - Central Railway Station, Melbourne - the principal building is complete though the roof along Swanston St over the other platforms is yet to be completed. 4 - Bourke St Melbourne - looking west from Swanston St - has the Wertheim and Roberts Stores in the view along with the post office. 5 - Bourke St Melbourne - looking east from Swanston St with Morells Orient Hotel and the Royal Mail Hotel on the two corners 6 - Melbourne from St Kilda Road.Demonstrates a set of 6 postcards featuring Melbourne cable trams.Set of 6 cable tram postcards mounted on to light weight boardtramways, flinders st station, swanston st, bourke st, collins st, st kilda road

This cable tram Gripman’s badge, or driver’s badge, was part of a tram driver’s uniform. The inscriptions on the front of the badge identify it as belonging to Gripman number 14, at the South Melbourne Car House depot of the Tramways Board. The Gripman Badge would be re-issued whenever another Gripman takes over the position. Cable trams were invented in America in 1873. In Melbourne, cable trams were in use from 1885 until 1940, with a network of up to 1200 cable cars or 'dummies' and trailers travelling at around 9.5 miles (15km) per hour along 46 miles (74km) of double tracks. The Gripman drove the dummy car, operating the heavy levers to connect the gripping gears to the cable installed in a slot in the road. To turn at intersections he would skilfully disconnect, freewheel around the corner and carefully reconnect to the continuously operating steel cable. Large winding gears in an Engine House along the line pulled the cable along, powered by steam engines and later electric engines. The gripping gears were in the centre of the car's floor with seating all around the sides, a dangerous place for curious children. , whose worried parents would guide them into the tram that was towed behind the dummy car. The Melbourne Tramways Board operated the cable trams between July 1916 and November 1919 after taking over from the privately operated Melbourne Tramway and Omnibus Company. In 1919, the Melbourne and Metropolitan Tramways Board (MMTB) took over the Tramways Board. Stokes & Sons: - The maker of the badge, Thomas Stokes, migrated to Melbourne from Birmingham in 1854 and set up business in Mincer Lane as a die-sinker, producing medals, tokens, buttons and silverware, and an engraving service. He moved to Flinders Lane in 1856. After a time, in 1894, the business became Stokes & Sons Pty: Ltd, electroplates and badge makers at Post Office Place in Melbourne. The maker's mark 'Stokes & Sons' was made on badges until 1962. LOCAL CONNECTION: -t was common practice to recycle the used cables from the tramway. For example, the Wollaston Bridge in Warrnambool, Victoria, is suspended by recycled cable tram Melbourne. (Other recycled cables were used for fencing wire.) -Portland's cable tram is an example of the cable trams used in Melbourne from 1885 to 1940.This badge was used to identify a Gripman who operated a cable car tram's dummy car for the Tramways Board in Melbourne between 1916 and 1919. It represents the need for people to be able to identify workers in the service industry, a need still addressed today by staff ID badges and digital identification. The badge also represents the period in Melbourne's history when cable cars were used for public transport for over four decades, gradually changing from steam to electric power. Trams still have an important role in Melbourne's public transport. Badge, round hollow metal dome with two open metal guides on the back. A cable tram Gripman (driver) badge with embossed inscriptions on the front and stamped on the back. There is a logo of entwined letters T and B on the front. It identifies Gripman number 14, South Melbourne, Tramway Board. It was made by Stokes & Sons of Melbourne. Impressed into the front: "S / 14 / M" "GRIPMAN" Logo intertwined "T" and "B" Embossed on reverse "STOKES &o SONS"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, badge, gripman, stokes & sons, numesmatics, tramway, tram, tram driver, uniform, cable tram, identification, cable car driver, tramway board, south melbourne, melbourne tramways board, tb, mtb, mmtb, melbourne and metropolitan tramways board, tramway button, gripman button, id, identification badg, staff badge, name badge, employee, grip car, dummy car

Agfa Colour slide, cardboard mount, by Keith Caldwell dated 12 March 1960, of W5 809 turning from Market St into Flinders Lane. Tram has two sets of monograms and numbers on the sides, is fitted with trolley wheels and showing route 55. Has an advertisement for British Bedford's vehicles on the front. The strip for the advert racks on the sides of the trams has been installed. In front of the tram is a remnant of cable tram track in wood blocks. In the background is the Flinders St Viaduct and the Port of Melbourne Authority Building.in ink on top of the slide "W5 (Cable tracks), Market" and hand stamped "12 Mar '60"trams, tramways, market st, flinders lane, w5 class, cable trams, tram 809

Negative - cable tram set turning from Smith St into Gertrude St 22/3/1940, trailer 286. Wal Jack Negative number T147. Has destination of Spencer St. and an advert for The New Palais Royale at the Exhibition buildings. In the background is G. D. Langridge Real Estate building. On the street outside is a fire alarm point. Rod Atkins advised 6/9/2020: "I have been so impressed with the photo that is being used in Bellcord for the issue that did some digging. The photo is priceless! The photo is taken on a Friday (to my surprise) mid-afternoon given the shadows. Did you notice the flip side of the dummy destination - Clifton Hill. Hard working cable tram line to the end - licence to print money for the board. The building on the South east corner. - G.D. Langridge & Sons Auctioneer. This was a Melbourne "institution" . George David Langdon was a local identity who went on to become MLA for Collingwood. ot sure when the business started but could have been in the 1860s or 70's Well before the cable trams. George died on 24th March 1891. The business survived till well after the war." Clock is showing 2.30pm, - day of the week - Friday.On rear of print in album "Cable 286 turning out of Smith St in Gertrude St Fitzroy. T147" and 22/3/1940.trams, tramways, cable trams, gertrude st, smith st, tram 286