Showing 90 items
matching lifting equipment
-
8th/13th Victorian Mounted Rifles Regimental Collection
Photograph
The Dibb Report into mainland defence of Australia,1986, among other things identified the requirement for protection of key assets in Northern Australia and the possibility of involving Army Reserve (Ares) units in this thus releasing regular forces for offensive operations. Dibb also pointed out that this defined role would result in a huge lift in Ares morale. In June 1988, the 3rd Division (3Div) conducted a Tactical Exercise without Troops (TEWT), Exercise ‘Distant Trumpet’ in the Katherine- Darwin area to study problems associated with defence against low level incursions against Tindal RAAF Base. Exercise ‘Northern Explorer’ followed in October of that year when units of the 3Div including A Squadron 8/13 Victorian Mounted Rifles sent patrol groups to get a first taste of environment and conditions. Post-Exercise reports had to include recommendations re: health, equipment and adaptation of Standing Operating Procedures (SOPs) in preparation for the new role deploying to Northern Australia. The first deployment by 8/13 Victorian Mounted Rifles was in 1988. Deployments continued in following years. In September 1993, 3 Troop (Wangaratta) VMR Squadron 4/19 PWLH commanded by Captain Kelvin Robertson deployed to NT. The training began with airfield defence at Tindal followed by a 1000km recon into Arnhem Land in four Landrovers. The troop reported on the conditions of the roads, airfields, bridges (mainly causeways) resources such as fuel supplies in the towns and infrastructure. Each troop taking different route. 3 Troop had the Northern route through Kakadu National park across the East Alligator River to Oenpelli then to Maningrida and Ramangining and south to the Central Arnhem Road and back to Tindal Air force Base. Two colour photographs of creek crossings, one more challenging than the other,during the annual exercise in Northern Territory, conducted by VMR Squadron 4/19 Prince of Wales's Light horse, 1994. -
Ballarat Tramway Museum
Photograph - Black & White Photograph/s, Richard Gilbert, 1975
Black and White photograph of BTPS No. 26 lifted while its side frame was being replaced during 1975. Photo printed in the August 1975 issue of Trolley Wire on page 32. Photo shows the broken side frame and the replacement side frame. The tram car has been lifted on No. 2 road within the depot building. Photo by Richard Gilbert. tramways, trams, btps, depot, tram equipment, tram 26 -
Ballarat Tramway Museum
Document - Folder with papers, Railway Track-work Company and Clementine and Thompson and Mercer Sts and Philadelphia and Pennsylvania USA. and Perrot and Adams Ltd, "Railway Track Equipment - Track Grinding Machines, Welding and Bonding Machines - Bonds, Welding Steel, Grinding Wheels and Blocks", 1920's?
Yields information about the type and presentation of books or information folders that were sent to the Electric Supply Company of Victoria about tramway products available on the market and the company the produced them.Folder with 24 pages of advertising pamphlets bound into it with two metal clip binders advertising products available from the Railway Track-Work Company and titled ""Railway Track Equipment - Track Grinding Machines, Welding and Bonding Machines - Bonds, Welding Steel, Grinding Wheels and Blocks". Has brochures or pamphlets for: . The Universal Rotary Track Grinder . Reciprocating Track Grinder . The Atlas Rail Grinder . The Ajax Electric Arc welders .Vertical Rail Lifter . The Jackson Electric Tie Tamper. Generally the lead page of each pamphlet has been imaged. Provides a description of each item, along with method of operation and parts listing generally. The folder has on a number of pages and the back cover, a sticker from Frank R. Perrot (Now Perrot and Adams Ltd), Machinery Merchant of 394 Kent St Sydney. Railway Track-work Company , Clementine, Thompson and Mercer Sts, Philadelphia, Pennsylvania USA. For a full scan of the document see the hi res file.Numerous: Front cover sticky label "1620" in top left hand corner, "Mr Pringle" on front cover and stamp with words "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on front cover. Inside front cover has a pencil note, behind the crease in the bottom right hand corner. On the first pamphlet "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on top right hand corner. On parts page for the Reciprocating Track Grinder has the "Perrot and Adam Ltd" company stamp.trams, tramways, trackwork, equipment, rails -
Queenscliffe Maritime Museum
Equipment - Winch
Winch came from pilot cutter Wyuna and was used to lift and lower work boatsElectric winch ex pilot cutter Wyunawinch, wyuna -
Kew Historical Society Inc
Equipment, Wood and Metal Laundry Lifters, 20th Century
... used to remove items from a laundry tub laundry equipment tongs ...Item used to remove items from a laundry tubPair of wooden laundry tongs or 'lifters', typically used in a copper to move or lift clothes. The tongs are joined by a flexible piece of metal at one end.laundry equipment, tongs, lifters -
Surrey Hills Historical Society Collection
Book, Conservation and restoration for small museums, 1981
Bibliog., 101 p. 23cm and 1 booklet (18p) This book covers specifically the problems encountered in small museum collections, including a lift-out supplement listing possible chemical and equipment suppliers in various Australian States.Front page: stamp of : Dr. W. R. C. Bennett / Director of Radiology / another stamp: RADIOLOGY DEPARTMENT /PRESTON & NORTHCOTE COMMUNITY HOSPITALmuseum conservation methods, suppliers-chemical and equipment -
Vision Australia
Machine - Object, Matrix Braille writer, circa 1968
Black box containing a Matrix Braille writing machine, with a 24mm-wide paper spool attached to the feeding mechanism. Corner of box is hinged and lifts up to reveal keyboard. Top half of box lifts to reveal Braille writer which is bolted to a wooden base that can be lifted out. The base is secured with a metal latch. Machine has black Bakelite keys with rubber pads beneath make this a "silent" machine; wooden case has black leather-like covering, hinged lid, metal clasps, and leather handle on the side. "Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front,Black vinyl-covered case containing black metal writer and paper spool"Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 1183, For The Royal National Institute for the Blind, London W.I." is stamped on the front.braille equipment, royal national institute for the blind -
Vision Australia
Object, Clarke & Smith, Clarke & Smith Talking Book Player cartridge, 1960s
A cartridge designed to be played on the Clarke & Smith MK1 Talking Book player. Each cartridge houses the complete mechanism, track change linkages, replay heads and tape spools, which are stacked on top of each other within the housing. When one track was finished, the user was required to lift the metal cassette, turn it over, and replace it on the turntable. The bulky cartridges were distributed by post or train in strong 'Globite' cases made with reinforced corners and strapped. Metal cartridge covering magnetic tape spool The Doves of Venusaudio equipment, clarke and smith -
Falls Creek Historical Society
Equipment - T-Bar Ski Tow, Falls Creek Ski Lifts, 1960s
This Ski Tow component came from one of the first T-Bars at Falls Creek, Victoria. Summit and Village T-Bars were built in 1961 followed by the Link Lift and Sun Valley in 1967.This item is significant because it is part of one of the earliest T-Bars at Falls Creek and illustrates the changes in their construction over time.T-Bar Ski Tow from one of the first T-Bars at Falls Creek, it is made of wood and metal.t-bars falls creek, falls creek, summit t-bar, village t-bar -
Falls Creek Historical Society
Journal - Ski-Horizon Vol 6 No 2, October 1954
Ski-Horizon is the official journal of the Federation of Victorian Ski Clubs which began publication in 1949. The were 26 original member clubs which included Albury Ski Club, Bogong Ski Club, Myrtleford Ski Club, Tallangatta and District Ski Club and Wangaratta Ski Club. Two pioneers of Falls Creek, Tom Mitchell, M.L.A., and Martin Romuld were Vice-Presidents of the Federation.This Journal is significant because it documents the early development of skiing in Victoria.The journal features stories and events chronicling developments in Victoria and internationally. Items related to the Falls Creek Area in this issue include:- Cover - Rudi Wurth, winner of the National Slalom and Downhill titles at Kosciusko, 1954. Page 3 - Commercial ventures are prospering in Falls Creek. Plans ahead for developments at Nissen Tow. Betty Plunkett will spend the year on the snow helping Skippy with the canteen. Les Mikel will help Toni with the tow. Bob Hymans and his wife leave for Europe soon to get fresh ideas and equipment. Bob intends to install a £15,000 chair lift with special cable which allow it to go round corners. Page 5 - Fred Griffith, President of the Falls Creek Alpine Village Advisory Committee has been in Melbourne lobbying for Government help to build a comfort station to provide facilities for a ski patrol shelter - aided and abetted by a "well known skiing M.L.A. toni st. elmo, skippy st. elmo, bob hymans, nissen ski tow, fred griffith -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, Barry Sutton, 19.07.1972
This photograph is taken in a room in the RDNS Heidelberg Centre. The Sisters are demonstrating a lifting technique to staff members. The Sisters are wearing their RDNS winter uniforms which are a blue/grey skivvie under a blue/grey V neck tunic style herringbone winter material dress with the RDNS insignia on the upper left. From the founding of the Melbourne District Nursing Society (MDNS) in 1885, known as Royal District Nursing Service (RDNS) from 1966, the rehabilitation of patients to insure they were able to live independently in their own homes was at the forefront of care given by their Trained nurses. As well as teaching and supervising the use of equipment, their Trained nurses taught them safe transfer techniques. These techniques were also taught to family members to enable them to care for their loved ones. RDNS at first held workshops given by a contracted private Physiotherapist, before employing their own Physiotherapist in 1975, who taught staff the correct transfer techniques, not only for safety of the patient, but to reduce physical strain on RDNS nursing staff and patient’s family members. When required the Physiotherapist accompanied the Sister on her visit to the patient in their home.Black and white photograph of three Royal District Nursing Service (RDNS) Sisters demonstrating a safe bed transfer. From Left to Right is the side on view of Sisters Daphne Geldard, who has short dark curled hair with her left arm around the back of Sister Elizabeth Francis, and her right arm under her legs. Sister Francis has short dark hair and is smiling. She has her right arm over the shoulders of Sr. Geldard, and her left arm is over the shoulder of Sr. Bev Armstrong. Her buttocks are slightly off the bed which has a white pillow and grey blanket. Sr. Armstrong is facing both Sisters. She has short straight blonde hair and has her eyes closed. She has her right arm around the back of Sr. Frances and her left arm is under her legs. The three Sisters are wearing light coloured skivvies under a darker V neck tunic style dress with the RDNS insignia on the upper left. Barry Sutton's Photographer's Stamp. Reprint Quote Number: KY22 Handwritten on back of photo are the names of the RDNS staff members and the location is Heidelberg Centrerdns, royal district nursing service, rdns uniform, rdns physiotherapist, rdns centre, sister daphne geldard, sister elizabeth francis, sister bev armstrong -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, Barry Sutton, 19.07.1972
Miss Kosch is a private physiotherapist contracted by RDNS. She is at RDNS Heidelberg Centre teaching RDNS staff a safe method of lifting and transferring Sr. Geldard from a chair. From the founding of the Melbourne District Nursing Society (MDNS) in 1885, known as Royal District Nursing Service (RDNS) from 1966, the rehabilitation of patients to insure they were able to live independently in their own homes was at the forefront of care given by their Trained nurses. As well as teaching and supervising the use of equipment, their Trained nurses taught them safe transfer techniques. These techniques were also taught to family members to enable them to care for their loved ones. RDNS at first held workshops given by a contracted private Physiotherapist before employing their own Physiotherapist in 1975 who taught staff the correct techniques, not only for safety of the patient, but to reduce physical strain on RDNS nursing staff and patient’s family members. When required the Physiotherapist accompanied the Sister on her visit to the patient in their home.Standing in the rear left of the black and white photograph is Ms Kosch, who has short curled dark hair and is wearing a check suit. She is looking down at Royal District Nursing Service (RDNS). Sister (Sr) Daphne Geldard, who has collar length curled dark hair, and is seated in front of her on a padded kitchen type chair. To Sr. Geldard's right, standing, is Sr Elizabeth Francis who has short dark curled hair and is bending forward with her arms outstretched under Sr. Geldard's armpits. She has her right leg braced against Sr. Geldard's right knee Sr Bev. Armstrong, who has short blonde hair, is standing at the right rear observing the procedure. The three Sisters are wearing a grey skivvie under a darker V neck tunic style dress with the RDNS insignia on the upper left. A black below knee boot is seen on Sr. Geldard's right leg. A closed dark wooden door with a white surround is behind Ms Kosch and to its right another chair is seen against the wall. Photographers stamp , names of staff, date and location. Quote KY 35rdns, royal district nursing service, rdns uniform, rdns physiotherapy, sister elizabeth francis, sister daphne geldard, sister bev armstrong, ms kosch -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, c.1967
The photograph is taken during an Education session at Royal District Nursing Service (RDNS). The Sisters are wearing their grey uniform cotton frocks and red cardigans of that era.Education was an integral part of Melbourne District Nursing Society (MDNS), later called Royal District Nursing Service, (RDNS), from its inception in 1885. Only Trained nurses (Nurses) were employed by the Society, and on visits to patients they taught the necessity of hygiene and cleanliness, as well as the need for a good diet, to bring about good health. Doctor’s lectures were later given at the MDNS home to instruct patients and their families on prevention of disease. Education to patients continued throughout the years regarding health care and the use of equipment in the home. RDNS Trained nurses (Sisters) received In-service education and by the end of the 1960s there was an increased focus on rehabilitation and independence. Patients were offered rehabilitation and new lifting techniques were introduced to reduce physical strain on staff and family members. Royal District Nursing Service ran its own rehabilitation program requiring staff to be trained in techniques by RDNS Physiotherapists.Black and white photograph of Royal District Nursing Service (RDNS), Sister Pat (Paddy) Rowley on left hand side, and Sister Joanne Wilkinson on right hand side, demonstrating the use of a hoist which has transferred Sister Liz Thomson onto a bed in the centre of the photograph. The bed is covered with white sheets and Sr. Thomson is lying on the bed with the sling of the hoist under her. The lowest metal bars and wheels of the hoist are under the bed and the top bars across the bed. Sr. Wilkinson's right hand is undoing the sling from the top bar of the hoist, and her left hand is holding the strap of the sling which is under Sr. Thomson. The Sisters are wearing their grey uniform frocks and dark cardigans. A window with two long floral opened curtains are behind the bed, and a strip heater is seen high on the adjoining wall.Photographers stamp. Quote No GW 90royal district nursing service, rdns, rdns education, equipment, sister pat (paddy) rowley, sister liz thomson, sister joanne wilkinson -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, colour, 01 03 1985
The Royal District Nursing Service (RDNS) Sisters are using a hoist to transfer a lady who has limited mobility into her wheelchair. The photograph is taken in the lady's home. From the founding of the Melbourne District Nursing Society (MDNS), in 1885, known as the Royal District Nursing Service (RDNS) from 1966, equipment was loaned and demonstrated to patients, and their family members, to enable them to care for their loved ones in their home. RDNS employed a Physiotherapist who taught RDNS staff the correct transferring techniques. New lifting techniques, such as the use of a hoist, was taught to RDNS staff and were used in patient's homes to undertake safe transfer of the patient and to reduce physical strain on RDNS nursing staff and family members. The Trained nurses of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the Sisters provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Poliomyelitis, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.Coloured photograph showing Royal District Nursing Service (RDNS), Sister Helen Pelosi on the left hand side. She has short dark hair; is wearing a a light blue apron over her RDNS uniform, and is moving a lady in a hoist to a wheelchair. Another RDNS Sister, who has short blonde hair, is wearing her RDNS uniform of Royal blue V neck tunic style frock, with part of her white blouse seen and a navy blue cardigan. She has her right arm extended towards the top of a hoist. The lady is laughing and is suspended in a sling attached to the metal hoist. Around her neck is a white scarf with blue dots which is hanging over her red jumper. She is wearing a blue dress and long dark socks. Both her hands are extended upward holding onto the metal cross bar of the hoist. Part of a wheelchair is seen in the left foreground. Open long gold curtains with voile curtains in the centre can be seen in the background.royal district nursing service, rdns, patient care, rdns equipment, sister helen pelosi -
Parks Victoria - Wilsons Promontory Lightstation
Sheave Block/Pulley
Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse. His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large rusted iron pulley, large loop at one end and smaller loop at the other. No hook.(Sheave Block) -
Parks Victoria - Wilsons Promontory Lightstation
Sheave block/ pulley
Pulleys were used to lift goods to and from boats and at other sites at the lightstation where hauling was undertaken. Historical images and text panels in the Wilsons Promontory Museum attest to the detailed logistics that needed to be exercised in lifting and transporting goods once they had arrived by boat at the Eastern Landing. Cranes and a flying fox were employed in the nineteenth century and updated versions of this equipment served well into the twentieth century. The first cranes to be employed at the site were built just after December 1857, when tenders were called to construct two cranes prior to the commencement of building the lightstation.180 The first boat landing at the promontory was built on the west side of the lighthouse, which the architect, Charles Maplestone sketched in June 1859, the same month that he announced the completion of the lighthouse.His drawing shows one of the cranes as a large structure built for heavy duty lifting. Soon the east landing became the preferred place for delivering stores, but as late as 1993 a crane, timber structures and disused heavy iron machinery remained at the old site.Large iron pulley with loop at one end and hook at the other, rusted. -
Mont De Lancey
Domestic object - Salt Box
The Salt Box was used to store salt for cooking purposes.An early 20th century German white wall mount enamel tin wall Salt Box with a dark blue lined trim around the edges and shaped top at the back. It has a wooden lift up lid, a hole for mounting it on a wall as well as 'Salt' inscribed on the front in elaborate black lettering. 'Salt' is printed on the front in elaborate letteringfood containers, salt boxes, cooking equipment -
Falls Creek Historical Society
Equipment - Chair from Bob Hymans' Alpine Chairlift, 1957
Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans die on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This chair is significant because it is the last chair from the first chairlift ever constructed in Australia.This is the last known chair of the Alpine Chairlift built in 1957 and deconstructed in 1961. It was built by Bob Hymans from recycled SEC Poles. The chairlift had 40 chairs on the 390 metre trip to the top. It carried its first passengers on 21 July 1957. Available to all visitors, the lower end of the lift was about 90 metres above the Upper Kiewa Road and it ascended 120 vertical metres to the top terminal above the race-line. The forty chairs transported skiers continuously at a speed of 1.5 metres per second, the upward trip taking just over four minutes. Each chair has a safety bar above the rider's knees.bob hymans, australia's first chairlift, alpine chairlift -
Falls Creek Historical Society
Equipment - De-Icing Hammer, 1970s - 1990s
This hammer was used by workers on the ski lifts to clear them of ice. The hammer was turned by the Ski Lift Company and had a long reach. It was mainly used on the Summit T-Bar and the International Poma before they had catwalks to enable easier access for maintenance. This item was donated by Douglas Zolla. He has worked in Falls Creek for over 30 years. From 1987 until 2002. Doug worked as a De-icer with the Falls Creek Ski Lifts Company. For many years he has been a guide with Falls Creek Snowmobile Tours.This equipment is significant as it was created by the Falls Creek Ski Lift Company to ensure safe operation of their ski lifts.A metal hammer with orange tape on the handle and a rope attached.ski lift maintenance, falls creek ski lifts, de-icing ski lifts -
Mont De Lancey
Tool - Bag Hook, Unknown
Used in the late 18th or early 19th century.A small steel double curved pointy hooked bag hook with a turned wooden handle on the top. The handle is attached through a hole in the steel and riveted to the the hook. It was used to assist with lifting large bags of wheat, fertiliser and so on in the late 18th or early 19th century. agricultural equipment, farm equipment, bag hooks -
Parks Victoria - Gabo Island Lightstation
Telephone
Telephones x 3 (GILS 0001, 0038, 0070; attached fixtures) There are three, black Bakelite, wall mounted, crank handle telephones across the lightstation; one in the former assistant keeper’s quarters, and two in the former head keeper’s quarters. The phone has instructions for its use on the crank dial. Two have acoiled handset cord, which dates the phone to just after 1949 when these came into use. The third has a smooth cord and must pre date 1949 (GILS 0070). Another much older wallmounted phone remains in the lighthouse (GILS 0041; attached fixture; see above 6.1). The four telephones at Gabo Island formed an intercom system that facilitated communication between the lighthouse and lightstation buildings. They demonstrate the necessity for employing various methods of communication in a remotely located lighthouse as well as communication between the lightstation buildings. Telephones of the same wall mounted, crank dial type remain at Cape Otway and Point Hicks As fixtures, the telephones belong to the building fabric and are included in the existing listing of the Gabo Island Lightstation in the Victorian Heritage Register (H1773). These intact items of equipment have first level contributory significance for their historic value and provenance.Black bakelite telephone, wall mounted with reciever/ handset on spiral cord attached to the body of the phone. There is a crank handle attached to the front of the telephone.On dial under crank handle. Outer perimeter of circular LABEL,"TO CALL:-TURN HANDLE & LIFT HANDSET / WHEN FINISHED PEPLACE HANDSET & TURN HANDLE" -
Parks Victoria - Gabo Island LightstationThere are three, black Bakelite, wall mounted, crank handle telephones across the lightstation; one in the former assistant keeper’s quarters, and two in the former head keeper’s quarters. The phone has instructions for its use on the crank dial. Two have a coiled handset cord, which dates the phone to just after 1949 when these came into use. The third has a smooth cord and must pre date 1949. Another much older wall mounted phone remains in the lighthouse. The four telephones at Gabo Island formed an intercom system that facilitated communication between the lighthouse and lightstation buildings. They demonstrate the necessity for employing various methods of communication in a remotely located lighthouse as well as communication between the lightstation buildings. Telephones of the same wall mounted, crank dial type remain at Cape Otway, Point Hicks. As fixtures, the telephones belong to the building fabric and are included in the existing listing of the Gabo Island Lightstation in the Victorian Heritage Register (H1773). These intact items of equipment have first level contributory significance for their historic value and provenance.Black bakelite telephone, wall mounted with reciever/ handset on spiral cord attached to the body of the phone. There is a crank handle attached to the front of the telephone.On dial under crank handle. Outer perimeter of circular LABEL,"TO CALL:-TURN HANDLE & LIFT HANDSET / WHEN FINISHED PEPLACE HANDSET & TURN HANDLE"
-
Falls Creek Historical Society
Equipment - Ski Equipment - Rope Tow Wheel, Nutcracker and Belt, 1951
FALLS CREEK ROPE TOWS Toni St Elmo brought back plans for a Hamilton rope tow from New Zealand. He had a rope tow built in the summer of 1950-51 and it went into operation the following winter. Skiers were charged 10/- per day to use it. Skiers held onto the rope with a locking device called a ‘nutcracker” attached to a webbing belt. This tow, known as the Nissen Tow, continued to operate until 1960. Bob Hymans installed a shorter portable rope tow for his guests at Skyline from 1954. Other tows included the Village Tow and the Nursery Tow. Eventually most of the tows were taken over by Alpine Developments. From 1960 onwards they were gradually replaced by T-bars and then later on by chairlifts. This belt is from the original rope tow used between 1951 and 1960 in the Falls Creek ski lifts. These items are significant because were part of the earliest rope tows constructed at Falls Creek.A canvas waist belt with leg hoops and metal joining and hook used to attach skier to the rope tow. The wheel is also a damaged component of the Rope Tow.falls creek, nissen alpine club, rope tows, toni st elmo -
Falls Creek Historical Society
Document - Plans To Modify & Extend Chair Lift, 07.11.1960
Bob Hymans Collection Bob (Herman) Hymans (a former member of the Royal Netherlands Navy) was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in July 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grand Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans die on 7th July 2007. This Collection of documents and letters tells the story of Bob's endeavours to develop Falls Creek into the ski village it is today.This letter is significant because it reflects the relationship between Bob Hymans and the Management Committee.A letter from the Management Committee Falls Creek in relation to his application to modify his chairlift. It states that other people went to the effort of committing proposals to paper and that Bob Hymans should have done the same. The plan submitted by Falls Creek Ski Tows Pty. Ltd. had been accepted. This precluded any of Bob's proposals. It also states that the Committee was reluctant to deal with any further applications from Mr Hymans until he dealt with other outstanding matters. These included lodging a complete proposal for his restaurant and also storage of equipment within the boundaries of his licensed area.falls creek tourist area management committee, chairlift proposals, planning, bob hymans -
Bendigo Historical Society Inc.
Document - ALBERT RICHARDSON COLLECTION: HANDWRITTEN report ROYAL HUSTLERS RESERVE
Hand written letter signed by A. Richardson, 29 Harrison Street, Bendigo - 03/02/1970. Royal Hustler Reserve No. 2 (lift) shaft. Depth 1660 feet. Memorial Hall in Pall Mall covers site. Steel poppet legs, 60 ft high (lattice-steel garden type). Winding engines built by Roberts and Sons, Bendigo. Pair of 24 in. clear cylinders, 5ft stroke, 10ft ? drums. Note 3rd wheel on poppet legs for pumping equipment to be raised or lowered. Gold yield from this shaft 9,009 ounces.person, mining, albert richardson -
Melbourne Tram Museum
Photograph - Set of 12 Black & White Photograph/s, Melbourne & Metropolitan Tramways Board (MMTB), 1966
Series of 8 black and white photographs of the trackwork equipment and tools on the MMTB system. .1 - Hydraulic drain cover lifting device. .2 - rack of jack hammers being lifted - St Kilda Road? .3 - length of rail being lifted by 12 men with MMTB equipment in the background. .4 - Pack of sleepers being lifted with many wood blocks in the background. .5 - pack of 12 jack hammers in their lifting rack. .6 - light weight tool being used to lift a track pit cover by two men. .7 - One man demonstrating the lifting of a 44 gallon drum. .8 - two men rolling a 44 gallon drum off a truck.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment -
Melbourne Tram Museum
Photograph - Set of 4 Black & White Photograph/s, Melbourne & Metropolitan Tramways Board (MMTB), Early 1970's?
Set of four Black and White photograph of recovery equipment for tramcars. Two prints of each except - .4 .1 - steel beam shown in position in the saloon portion of a tram used to secure a bogie to the body of tram with steel section over transom and showing lifting hooks and securing or lifting bolts. Shown in position where the tramcar body floor was above that of the tramcar transom. .2 - ditto, but on an angle in a wide body tram where the top of the transom matched the top of the floor. The bogies are on an angle. .3 - brackets in position for securing the body spring on the truck fitted to tram 980 to the body of the tram. .4 - brackets shown stored inside the cabin of the tram. Mid 1970's? Photographer likely MMTBtrams, tramways, recovery, accidents, tramcars, sw6 class, pcc class, w2 class, tram 980, st. louis b3 -
Falls Creek Historical Society
Equipment - Mim Sodergren's Skis
Mim (Mariam) Sodergren developed innovative, specialized ski programs for women and children in both Australia and the United States. She and her husband Mike originated from Tahoma, California, USA. They spent 17 years of their lives without a summer, working as ski instructors in Lake Tahoe during the northern winters, and then they’d head off to Falls Creek and Thredbo in Australia. Mim and Mike Sodergren were both inspiring instructors at Falls Creek Snowsports School, dedicated to education and had a deep-seated passion for fostering an inclusive Snowsports community. Tragically Mim and Mike were among the 18 people killed on 30 July 1977 in Thredbo, Australia, when a landslide tore through Thredbo’s ski resort village and demolished two staff lodges. In 1997 the Australian Professional Snowsport Instructors (APSI) established the Sodergren scholarships in memory of Mim and Mike. The Sodergren Scholarship recognises the rising potential of Snowsport instruction within Australian ski resorts and allows the recipients to further their professional development by providing all training free of charge for one season. The women’s program still operates at Falls Creek and is a "heartfelt tribute to the memory of Mim Sodergren. Designed by women, for women, and inspired by the enduring passion of Mim and her partner, Mike, who was also an instructor, this program is a wonderful opportunity to learn to ski in a friendly and supportive environment, just as Mim envisioned." (Falls Creek Website 2024). Mike’s Men’s Ski Program at Falls Creek is also named in honour of Mike Sodergren. Mim’s skis were kept for many years by Ski Lifts at Falls Creek and were recently donated to the Falls Creek Museum for safe keeping.These skis are significant because they belonged to an iconic ski instructor still commemorated at Falls Creek, Victoria.A pair of Atomic Arc Skis, primarily black with coloured logo.ATOMIC ARC MODULE 645SLmim sodergren, mike sodergren, atomic skis, thredbo landslide -
Vision Australia
Equipment - Object, American Foundation for the Blind, Tellatouch
The Tellatouch was developed in the American Foundation research laboratory and resulted from one of the first AFB research projects, a major effort in the mid-1940s to help deaf-blind people. The device helped end social isolation for hundreds of deaf-blind children and adults. The Tellatouch provides a means of communication between a sighted (or blind) person and a deaf-blind person who can read braille. The keyboard has three rows of ten keys each and a standard braille keyboard on the fourth row. At the rear of the machine is a round metal plate with the braille cell in the center. The deaf-blind person rests a finger on the braille cell. Pins rise to form the equivalent of the letter key that is struck. The body of the device covered in beige vinyl, with a hinged lid at the front which lifts up to reveal the keyboard. The lid is secured with a metal latch at the front.Beige vinyl machine with leather carry strapbraille equipment, assistive devices -
Vision Australia
Machine - Object, Matrix Braille writer model G, circa 1968
Black box containing a Matrix Braille writing machine, with a paper spool attached to the feeding mechanism. The front portion of box is hinged and lifts up to reveal keyboard. Top half of box lifts to reveal Braille writer which is bolted to a wooden base that can be lifted out. The base is secured with a metal latch. Machine has black keys and the wooden case has black leather-like covering, hinged lid, metal clasps, and leather handle on the side. "Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 792, For The Royal National Institute for the Blind, London W.I." is stamped on the front,Black vinyl-covered case containing black metal writer and paper spool"Model G, Matrix, Coventry Gauge & Tool Company, Ltd., No. 792, For The Royal National Institute for the Blind, London W.I." is stamped on the front.braille equipment, royal national institute for the blind