This post drill press has been made by Melbourne business, Dawn Manufacturing Company. It can be operated manually or by a pulley driven flywheel, with the aid of an engine connected to a power supply. In the late 1800s early 1900s a drill press like this would have been driven by steam from a boiler, the main power source for manufacturer’s power at that time. Dawn’s Golden Anniversary 1917-1967 Catalogue describes this model 611 drill as … “Ruggedly constructed with accurately reamed bearings. The coupling between the main spindle and feed screw engages the full circumference of the spindle, and embraces a ball-bearing thrust race. The pillar, as in all “Dawn Drilling Machines” is a solid bright steel bar, in place of the usual light tubing. Adjustable automatic feed.” And “F. & l. Pulleys extra, if required”. DAWN MANUFACTURING CO. The Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. - 1959 the company was taken over by G.N. Raymond Group. - 1967 the Dawn Manufacturing Co. had distributors in Australia and overseas, including USA, Canada, New Zealand, Asia and the Middle East. - 1973 the Siddons Ramset Limited acquired Dawn. - December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. - November 1998 Dawn became 100 per cent Australian owned. The drill is a typical tool of a blacksmith, cart wright, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-20th century.Post type drill press machine with gear driven flywheel. Drill press is attached to a post and is fitted with a pulley belt and will run at a speed of maxim 200 r.p.m. The machine can also be manually operated. It has an aperture in the centre, a chuck, for the drill bit and has two metal handles at the centre, on the right hand side. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. Made by Dawn of Melbourne, Australia. Model No. 611, Code No. 9157"DAWN MFG COY”, “MELB. AUSTRALIA", " 611"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, blacksmiths, blacksmith’s drill, blacksmith tools, dawn drill model no. 611, dawn drill code no. 9157, dawn manufacturing coy melbourne, dawn manufacturing coy coburg, dawn post drill, drilling machine, drill with gear driven flywheel, forging tool, metal working tool, post drill, steam powered drill, trade tool, warrnambool district 1900s

Donated to the Society by Liana and David Thompson, who acquired the items as guests of TT Lines on the premier voyage, flying to Devonport and returning on the ship. Refer photos 1265 and 1270.One of several souvenirs from the premier voyage of the Spirit of Tasmania, Devonport to Port Melbourne 27 November 1993, a trip made by Port Melbourne Mayor Liana Thompson and her husband David: souvenir can of 'Boags Draught' Tasmanian beer, with commemorative label for the first official voyage 29 Nov 1993'14 3327 11 18' stamped on bottomtransport - ferries, celebrations fetes and exhibitions, liana thompson, mayors, david thompson, tt-line co pty ltd, spirit of tasmania

Cast iron stoves burn solid fuel such as wood or coal, and are used for cooking and warmth. The stoves have a firebox with a grate where the fuel is burned. The hot air flows through flues and baffles that heat the stove top and the oven. Before cast iron stoves were invented, cooking and heating were carried out in outdoor open fires, and later, in fireplaces inside the home. In 1642 the first cast iron stove was manufactured in Lynn, Massachusetts, where molten cast iron was poured into a sand mould to make rectangular plates that were then joined together to make a box. Benjamin Franklin invented the more efficient Pennsylvania stove in 1744, and this efficient design is still used today. After the mid-19th century cast iron stoves were produced with burners in different positions, giving varied temperatures, so a wide variety of foods could be cooked at the same time at the most suitable heat, from slow cooking to baking scones. In contemporary times people the new wood-burning stoves had to meet the anti-pollution standards now in place to protect our environment. By the 1920s gas cookers were being introduced for domestic use, and by the 1930s electric home cookers were being offered to householders. PLANET STOVES In August 1925 the firm Cox and Rizzetti, Stove Works, and also Sydney Road, South Melbourne, advertised in the Brunswick and Coburg Leader of November 11, 1925 as "formerly with Harnwell and Sons" and as "specialists in solid cast iron Planet stoves ... which merit an inspection from builders and householders". The firm continued in business and was mentioned as sponsors in the King Island News in 1971. Harnwell and Sons was listed in the Victorian Government Gazette of 1894. It is curious that the firm was mentioned in an article in the Sunrasia Daily of June 14, 1934 titled 'Planet Stoves' as a manufacturer of Planet Stoves. This Planet No 3 stove is an uncommon example of cooking equipment used in kitchens in the early 20th century, as the firebox is above the oven rather than beside it. The cast iron combustion stove is significant as part of the evolution of domestic cooking. Previously cooking was mostly carried out in outdoors in open fires, and later in fireplaces indoors. Cast iron stoves are still used today and have additional features such as thermostats to monitor and maintain temperature, water heating pipes connected, and environmentally approved anti-pollution fittings. Stove; a compact, blackened cast iron combustion cooker, installed within a fireplace and enclosed by bricks on both sides. The upright rectangular stove has a flat top with three round, removable cook plates and a flue connected at the back. The front has three doors with round knob handles; a swing-down firebox door above a sliding ashtray, and two side-hinged oven doors above a sliding opening. Inside on the side walls are two pairs of runners. Behind the pair of doors is an oven with two pairs of rails and two removable metal shelves. The stove has cast inscriptions on the chimney flue and on the front of the right hand side stove door. The model of the stove is The Planet No 3, made in Melbourne.Chimney flue, "[within rectangle] THE / PLANET" Stove door, "(within oval) PLANET / No 3"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, stove, cast iron stove, combustion stove, wood-burning stove, wood stove, wood oven, solid fuel stove, cooker, the planet, planet, planet no. 3, kitchen equipment, baking, domestic cooking, cooking equipment, food preparation, planet stove, planet cooker, cooking range, slow combustion stove, antique, range cooker, cox and rizzetti, harnwell and sons, melbourne manufacturer

This item belonged to Dr Cyrus Jones, who performed a lot of circumcisions. There is a section on the tape made in the museum in c. June 1997 where Dr Jones talks about this. These devices were possibly made in Melbourne, perhaps by Surgical Manufacturers. The method of use for this item is as follows. Unscrew large screw to release bell. Bell sits on tip of penis inside prepuce. Pull prepuce up & through hole to trap prepuce skin. Reassemble, & tighten screw to prepuce and cut foreskin loose.A chrome metal medical device for performing circumcisions. Consists of a metal key/foot section, and a metal screw for tightening.surgery

Royal Doulton white china commemorative plate and cup with goddess surrounded by flags. Made to commemorate Empire Day May 24th. Has saying and gold edging. Made for Mutual Store Melbourne.plates, china

Made at Port of Melbourne Authority [P.O.M.A] shipwrights shop Williamstown in 1975P.O.M.C. wharf carpenters maintenance puntworking boats, poma, williamstown, shipwrights

This instrument measures elevation by sensing minute changes in barometric air pressure relative to a fixed datum point at sea level or a known elevation, such as the starting point of a major town during a road survey, and has an accuracy of +/- 20 feet when used in experienced hands. The finely divided scale around the perimeter of the face is marked from 0 to 6000 feet elevation and 25 to 31 inches of mercury (Hg) for barometric pressure The single fine counter-balanced hand or pointer rotates anti-clockwise with increasing elevation and decreasing pressure. The label "compensated" indicates that the instrument is constructed to compensate for the effect of temperature changes on the accuracy of readings. Surveyor's Pocket Altimeter - Aneroid Barometer Type Branded N H Seward, Melbourne. Made in England. With leather carrying case and strap.forest measurement, forests commission victoria (fcv), surveying

Clothing belonging to Joyce Knight, Kilmore family.20th C. ladies ensemble. Rear buttoned blouse and turquoise jacket with blouse fabric trim."Styled & made by Young Fashions" "Melbourne" "Double knit jersey/100% acron/ The new fashion synthetic"knight

This cup, made in Melbourne, is a 1946 award for a table tennis competition in the Warrnambool district. The P.C.S.A. may stand for Presbyterian & Congregational Sports Association, with the trophy being won by the Congregational Church team. The donor’s initials, W.Y.M.C., may stand for Warrnambool Young Men’s Club. The Warrnambool Congregational Church was founded in 1862 with a church opened in Liebig Street in 1864. This church was sold and a new one opened in Henna Street in 1940. In 1979, after the Congregational Church merged with the Methodist Church, the Henna Street church was sold to the Salvation Army.This cup is of interest as an example of a Warrnambool sports trophy given over 70 years ago.This is a small silver cup mounted on a brown Bakelite base. The cup has two handles and an inscription on one side of the cup. The silver is a little tarnished.‘E.P.N.S. A1’ ‘Tilbury & Lewis Pty Ltd Lewbury’ ‘P.C.S.A. Table Tennis Congregational Team Premiers & Champions 1946 Donated by W.Y.M.C.’ western district sport, warrnambool table tennis, warrnambool congregational church, history of warrnambool

This water pump was owned by Dr. W.R. Angus AND was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Fire pump, part of the W.R. Angus Collection. Red metal water pump. "D" shaped pump handle slides within pump cylinder, stand has 'U" shaped footrest. Pump has threaded fitting for pipe at top and wire filter at bottom. Made by Stokes, Melbourne. Remnants of red paint left on pump. Card label is attached. Moulded into metal "STOKES" and “MELB”. Label attached with string to handle (no text visible).flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, water pump, fire pump, fire extinguisher, safety equipment

These medals were produced for Anzac Day 1918 by the Education Department of Victoria and made by the Melbourne firm, Stokes and Son. They were issued to Victorian school children and also sold to aid the war effort. These medals have no particular local provenance but are retained for display purposes..1 A silver-coloured metal medal with an image of an A.I F. soldier and printed words on the obverse side and a banner and decorative leaves and printed words on the reverse side. The medal has a metal circular piece at the top for attachment to a ribbon or cord. .2 as above except that the medal is bronze-coloured. EDV Gallipoli France Palestine Anzac Day 1918 Honor to the AIF S & S world war one, history of warrnambool, anzac day

Badge made for the MMTB for use by Senior Traffic Officers. Made by Stokes & Sons Melbourne.Demonstrates a MMTB Traffic Officer's pass.Badge - brass, pressed with blue enamel paint infill, number 24.passes, travel passes, tramways, employees, mmtb, officers, traffic officers

“The Little Book of Dumb Ways to Die”. Booklet associated with the public service announcement campaign made by Metro Trains in Melbourne to promote railway safety.trams, tramways, metro trains, safety, passengers, public relations, publications, publicity

Medal ribbon used for Olympic medals in the Sydney 2000 Paralympic Games and made from fine 19.5 micron merino wool. It was made by Melbourne company TD Noone Woven Products who created the ribbon on a conventional ribbon loom. The finishing processes were undertaken by Superior Fit Australia, an Albury-based company. The ribbon was colour tested against various garment colours to confirm design suitability and colour balance and trialed for wearer comfort as it needed to be soft against the skin when carrying a medal. Durability was important as an Olympic medal is a lifelong keepsake. Woolmark supplied 5.2 kilometres of completed ribbon for medal useage.wool - superfine, woolmark company td noone woven products superior fit australia, ribbon, sport, the woolmark company 2000 australian olympic display - exhibition (21/12/2001 - 24/05/2002)

Wedding clothes - January 1968. Lined green dress and matching coat.Green Dress and coat Lemon lining - Shantung Made by Hermes Pty. Ltd. Melbourne Purchased from Hermes of Collins Street Decorative ribbing - same material as outfit wedding going away outfit, hermes of melbourne

Medal ribbon used for Olympic medals in the Sydney 2000 Olympic Games and made from fine 19.5 micron merino wool. It was made by Melbourne company TD Noone Woven Products who created the ribbon on a conventional ribbon loom. The finishing processes were undertaken by Superior Fit Australia, an Albury-based company. The pattern is an adaption of the SOCOG wave design. The ribbon was colour tested against various garment colours to confirm design suitability and colour balance and trialed for wearer comfort as it needed to be soft against the skin when carrying a medal. Durability was important as an Olympic medal is a lifelong keepsake. Woolmark supplied 5.2 kilometres of completed ribbon for medal useage.SYDNEY 2000wool - superfine, woolmark company td noone woven products superior fit australia, ribbon, sport, the woolmark company 2000 australian olympic display - exhibition (21/12/2001 - 24/05/2002)

This wedding dress and headpiece were worn by Emily Elizabeth (Betty) Cock (1907-2001) when she married Euston Murray Nutchey at St Andrew's Church, Brighton, on 28 April 1938. The bride's great-grandmother, Emily Cock (nee Smith), was married in the same church 69 years earlier; Emily's dress is also in the Brighton Historical Society collection. The dress was made by Melbourne dressmaker Beatrice Cook, with distinctive blue beaded panels worked by Betty's younger sister Margaret (1915-2006) to match the wedding's blue-and-pink colour scheme. The dress was accessorised with a pale blue tulle veil and a bouquet of blue hydrangeas, delphiniums and pale pink roses.Satin dress cut on the bias, originally ice-blue, now faded to cream. The dress features a long train and broad v-neck. The bodice and waist are softly ruched and gathered on either side of a finely beaded centre panel running from the neckline to the hem. The beadwork features a design of small cream-coloured leaves winding between large stylised blue flowers and leaves, all bordered with silver beads. Full-length sleeves are slightly puffed at the shoulder, narrowing to a close fit, with beaded cuffs matching the centre panel. The dress is accompanied by a matching blue, cream and silver beaded coronet or headpiece; this was originally worn with a pale blue tulle bridal veil.Label, woven mauve on beige silk, centre back: Beatrice Cookbetty cock, betty nutchey, emily elizabeth cock, emily elizabeth nutchey, euston murray nutchey, beatrice cook, wedding dress, st andrew's church brighton, 1930s, frances margaret cock, frances margaret ward

Badge made for the Hawthorn Tramways Trust for use by employees as a free pass to travel on their tram services. c1916. Made by Stokes & Sons Melbourne.Demonstrates a HTT employees pass.Badge - made from a pressed or cast metal, stamped '85' on rear with the manufacturers name at the base. Fitted with a steel ring through an eyelet at the top.passes, travel passes, htt, tramways, employees

15 pages of research on the Heitmann family starting with Herman and Catherine (nee Roberts), Frederick and Ellen (Nee Miners) and Ronald and Catherine (nne Pollock). Herman was born October 5, 1842 in Nartum, Germany. He made the trip to Melbourne in 1863 aboard the "Sussex".`genealogy, family, heitmann

Razor metal with synthetic ornate handle. "Special Hollow Ground" "Specially made for A Harris & Co Melbourne" and "Joseph Allen and Son, Sheffield England" inscribed on razor. In box container. 3 piecesOn blade "Special Hollow Ground" "Non XLL Joseph Allen and Son" "Sheffield England Specially Made for A Harrison and Co Melbourne"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Morse key stainless steel. "The Simplex Auto" Registered 4420. Made by Leo G. Cohen, Melbourne Victoria. Supported on three rubber legs, with connecting lead across two terminals under base.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Royal Australian Army WRAAN Corps. 00066 .1 Silver buttons made by K.G.Luke Melbourne Kings crown & map of Australia 1 centremetre x 2 00066.2. Hat badge, Queens crown, white metal, slider fitting. 00066.3 Buttons, grey felt covered, 2 centremeters x2 00066.4 Officers shoulder pips, white metal & enamel. 00066.5 Cloth shoulder boards with maroon officers pips, cut off uniform 10 x 5 centremeters plus buttons x 2

SEC Buttons used on Regional Tramways UniformsA collection of nine brass, silver plated buttons as used by the State Electricity Commission of Victoria on Tramways uniforms 1921 State Electricity Commission of Victoria, with the Southern Cross on a shield over a clenched fist releasing electric power. On back of button is "Made by Stokes & Sons Melbourne.tram, button, stokes & sons, sec, bendigo

Small Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, htt

The document provides cross sections of track used from c1920 to 1928. The folder is marked "H Bell" most likely the son of the later Chairman, Mr Hector Bell who was a civil engineer with the MMTB. 1 - P3948 - Camberwell Road - 1926 2 - P2789 - Camberwell Road reconstruction - 1920 3 - P3753 - Chapel St - 1926 4 - P60 - Expansion joints Church St bridge - 1924 5 - P3686 - Commercial Road reconstruction - 1926 6 - P4024 - Cotham Road reconstruction - 1927 7 - P4699 - Droop St duplication - 1927 8 - P2384 - Flemington Road conversion - 1925 9 - P1187 - Flemington Road tramway - undated c1920 10 - P4131 - Flinders St conversion - 1927 11 - P4132 - Flinders St conversion - special track drains where subject to flooding - 1927 12 - P3603 - Glenferrie Road east track - 1926 13 - P2608 - Glenferrie Road reconstruction - 1925 14 - P3577 - Glen Huntly Road extension - 1926 15 - P3745 - Glen Huntly Rd duplication - 1926 16 - P4655 - Gilbert Rd duplication - 1928 17 - P2472 - Hannah St at Crossings 1925 18 - P2459 - Hannah St in plantations - 1925 19 - P2582 - High St Prahran reconstruction - 1926 20 - P1594 - High St Prahran reconstruction - 1925 21 - P3611 - High St Malvern reconstruction - 1926 22 - P3900 - Lygon St - 1926 23 - P3689 - Malvern Road reconstruction - 1926 24 - P3951 - West Coburg Route - sleeper spacing - 1926 25 - P4703 - Nicholson St Coburg - duplication - 1928 26 - P4470 - Norwood Road duplication - 1927 27 - P2473 - Park St tramway - 1925 28 - P3707 - Riversdale Road reconstruction - 1926 29 - P4630 - Riversdale Road extension - 1927 30 - P4497- Riversdale Road duplication - 1927 31 - P1387 - South Melbourne Road - special boxed in Construction for Albert Road (parking loop) - 1924 32 - P4691 - Swan St reconstruction - 1927 33 - P3640 - Victoria St part - 1926 (2 copies) 34 - P4522 - Wallen Road reconstruction - 1927 35 - P3939 - Wallen Road reconstruction in front of depot - 1927 36 - P4702 - Trial types of track - 1928 37 - P4254 - Wattletree Road reconstruction - 1927 38 - P4531 - Wattletree Road connection to Glenferrie Road - 1927 39 - P4708 - Wellington Rd siding - 1928Yields information about the various tramway track cross sections used by the MMTB including cable tram conversions.Folder - heavy card cloth covers fitted with two interscrews containing some 39 plus one duplicate folded blue prints. Covers made by Swinnerton Bros of Melbourne - see image 6 for their logo/trademark.Has "H Bell" in ink on rear cover.tramways, mmtb, tram tracks, rails, civil engineering, cable conversion, new tramways

"Art is the vehicule for communications far Beyond the confines of a space, while design is the aesthetic cradle in which messages are nurtured and processed." "A 586 rework of the iconic building that has withstood the redevelopment of the Melbourne Docklands and defied the odds. On display a large format print 700mm x 1400mm print. Also a limited run of smaller prints on archival paper also available to support Melbourne's first non-profit charitible organisation that is still self funded, ie. not government funded." During the Open House Melbourne 30-31 July 2011, the artist nicknamed "586" participated in one of the Norla Dome Project Space events sponsored by Bendigo Wealth. Made in Melbourne, 586 is an urban digital experimentalist who blends social narrative with found image creating messages that inspire social consciousness and free thought. Cast in a local foundry back in 1991, 586 was a number, amid hundreds of men working between the ladie and the furnace in a clock on - clock off automated industrious landscape. Legend tells of a time when correspondance to workers was addressed to their number, not their name. Disapproval spread rapidly and a revoit soon followed, eventually the power of the masses won out, but the demoralizing treatment of the worker would go on to shape 586's perception and became the catalyst for a personal protest against social imbalance. This print was on display and smaller prints were also sold to raised funds for the Mission.DigitalLarge digital print of a design that overlays various symbols ( 4 flying angels ), the sails of a sailing ship and contemporary cityscapes and seascapes. centrally features a full photograph of the Mission to seafarers building at 717 Flinders St. Melbourne. Mounted in a large black frame and glazed with perspex .mission to seafarers, flinders street, melbourne, windvane, dome, flying angel, sea, norla dome, bendigo wealth, artist 586, 2011, artwork-paintings, open house, norla dome project space