Showing 80 items
matching model farm
-
B-24 Liberator Memorial Restoration Australia Inc
Bomb Release Quadrant- Scale Model, B24-Liberator Memorial Restoration Fund Incorporated, December 2018
After an eight year international search for a complete bomb quadrant to fit the B24- Liberator fuselage it was decided to create a replica. This scale mode was used to prove the methodology.This scale model allowed us to manufacture a full size complete working replica.This replica is now installed in the B24-Liberator and completes the operational system.Quarter circle quadrant with operating levers and security bracket. Body is dark green with two red operating handles. -
B-24 Liberator Memorial Restoration Australia Inc
Manual - Maintenance Manual for B-24 Liberator Aircraft, ERECTION AND MAINTENANCE INSTRUCTIONS FOR ARMY MODELS B-24D, G, H AND J, RB-24C AND E NAVY MODEL PB4Y-1 BRITISH MODELS LIBERATOR BIII, BIIIA, BIV, GRV, GRVI, AND BVI
This Manual was used by maintenance crews to repair American B-24 aircraft, for Army, Navy and British models.Vital for maintenance crews.Quarto size Paper Manual with cardboard backing held together with metal butterfly studs.Inscriptions as previously stated. RESTRICTED, FOR OFFICIAL USE ONLY, T.O. NO. 01-5EC-2. 2O JULY 1943 , REVISED 5 AUGUST 1944. -
Melbourne Legacy
Document - Document, diary
A diary written by Legatee Frank Doolan as he sailed to Perth and then visited Legatee Ivan Davies and his wife Mercy. He mentions docking at King George Sound which was the harbour from which transport assembled to convoy to the Middle East for the first World War. He was greeted by a member of Perth Legacy, Keith Manwell. He mentions visiting Mt Clarence and The Anzac Desert Mounted Monument "which was destroyed by Nasser's Gyppos at Port Said, and of which the pieces were transported back to Australia, stone base and all complete. Where a new model was made by Ray Ewen at Frankston and was sent back to Italy to be melted down and recast. It is double life size and very striking, depicting an Anzac charging from a horse which has been shot down under shellfire, to a new charger - rearing to go." He leaves the SS Kangaroo for a few days to visit a "Legacy pal", Ivan Davies. They toured his farm 'Carngham'. His observation at the end shows the comradeship of Legatees. "time to depart after several glorious days of perfect hospitality. To be accepted spontaneously as one of the family is the test of true friendship, and we received the full treatment from Mercy and Ivan at 'Carngham'". The year is unknown but the trip was in March. It could have been before a Legacy Conference in Perth. Was with other memorabilia that has come from Frank Doolan from both his war service and his time with Legacy. Frank Doolan posted this copy of his diary to Ivan Davies in 1978. Not sure how it and the cover letter (01131) were returned to Legacy's collection. The diary shows that Legatees from different regions of Australia visited each other and had strong friendships over the years. A carbon copy of a diary x 11 pages, written by L/- Frank Doolan on a trip on the SS Kangaroo and a visit to L/- Ivan Davies.Dairy is handwritten. Pages are numbered 67 to 78 in printed numerals in top right of each page.comradeship, frank doolan -
Wodonga & District Historical Society Inc
Machine - Singer Treadle Sewing Machine, The Singer Manufacturing Company, c1890
The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s.| This sewing machine belonged to Isla Ilma Margaret Ernestine neeTasker, mother of Alfred Haeusler. Singer was first established as I. M. Singer & Co. in 1851 by Isaac Merritt Singer with New York lawyer Edward C. Clark. Best known for its sewing machines, it was renamed Singer Manufacturing Company in 1865, then the Singer Company in 1963. The Singer company began to market its machines internationally in 1855 and won first prize at the Paris world's fair that year. They had offices established in both Sydney and Melbourne by the mid-1960s. The company demonstrated the first workable electric sewing machine in 1910. Singer was also a marketing innovator and a pioneer in promoting the use of instalment payment plans, making their machines more affordable for many people. This item is from the Hauseler Collection which documents social life of early settlers in the Wodonga community.Singer "Coffin top" treadle sewing machine with extension table. The machine is mainly black and silver metal but is extensively decorated with coloured decals. The decorations on this machine features a pheasant design which also helps to date the machine as it was only used from 1890 to 1915. The sewing machine is set into a wooden table with and extension leaf and 6 drawers, 3 on either side. The frame and treadle mechanism are iron with a thin leather belt to drive the mechanism. The "coffin" shaped top sits over the machine to protect it when not in use and is easily removed. The extension leaf provides a larger working surface and folds down when not in use. The Singer logo attached to the front of the machine features a needle, shuttle and thread.On metal base plate: "PATENTED /DEC 5 -1882/ MARCH 20 - 1883/ AUG - 21 1888. Model no: L6485622 Along top of machine: "The Singer Manufacturing Co." Front right: Singer Company Logohaeusler family, wodonga pioneers, sewing machines, singer sewing macnine -
Mont De Lancey
Decorative object - Small Wheel Lorry, Mr Chas W. Davis, Unknown
The collection of thirteen model horse drawn vehicles were carefully handmade by Mr Chas W Davis 1925 - 2002. He was a talented artist and saw doctor. This model of a horse drawn Small Wheel Lorry replicates the vehicle that enjoyed respect from the public during the 1880's and early 1900's. A model of a Small Wheel Lorry with a long four spoked wheeled wooden flay tray drawn by a brown horse. The wooden shafts are to control the horse whilst working. It has a grey wooden ice box with a metal lid with ICE painted in black letters inside a black lined outline on the side. On the side of they lorry or dray is painted WOOD - COAL - COKE - C. MEE LA1271 in black paint. These are long strong carts or drays without fixed sides for carrying heavy loads. They were the truck of the horse drawn era, from the large wool bale lorry to the suburban ice and wood lorry. It has been said they had their origins in the German farm wagon.ICE is painted in black capital letters on the side of the ice box. On the side of the lorry is painted - WOOD - COAL - COKE - C. MEE LA1271replicas, models, scale models, vehicles, horse drawn vehicles, toy horses, drays, carts -
Wodonga & District Historical Society Inc
Functional object - Amano Time Clock used in the J. Mann & Sons General Store in Wodonga, c. 1960s
Part of the 'Mann' collection, used for time keeping by employees in the J. Mann & Sons General Store in Wodonga High Street in the c 1960s. J. Mann and Sons was first established as a farm produce store in 1921. The range of products was extended in the 1930s and included groceries and hardware, as well as the first petrol bowser in Wodonga outside the store. After WWII, the premises were extended and the range of products continued to increase. In the 1960s the Mann Family opened a new supermarket in Wodonga, in addition to the hardware business, providing steel, plumbing and industrial supplies, and they employed over 100 people at one stage. With changes in the retail industry, the Mann Family sold the main hardware business to Bunnings and the produce business to the Kelly brothers in 2006. The Amano time clock has local significance due to its use in the J. Mann & Sons General Store in High St, Wodonga and the association with the prominent Mann family.Green metal electronic Amano time clock used by employees in the J. Mann & Sons General Store in Wodonga, with a brown clock face and light coloured numbers. Two labels on the lower part of the front surface with a horizontal lock between them, and a small metal plate on the proper left side with the model and serial numbers, plus "S 422" written in black marker below. Slot in the top surface of the time clock for the employees' time cards."AMANO" - on the clock face "TIMETEK SYSTEMS / Phone or Fax: / BU..NESS / BISCOM / COMMUNICATIONS" - on the lower front "Model 6733 Serial No 23229 / Volts /240 / Watts 5 / Hz 50 / AMANO CORPORATION / MADE IN JAPAN / S 422" - on the lower proper left sidemann, general store, wodonga, time clock, commerce, local business, high street, j. mann & sons -
Melton City Libraries
Photograph, Harvesting, 1950
1950 decade HAY FORK - A local invention. Bill and Arthur Gillespie and Bon Barrie In the early 1950’s Bill Gillespie of Bulmans Lane had been experimenting in developing a machine to improve the collection of hay sheaves at harvesting and stack building time. The ripened crop was cut by a reaper and binder which bundled the storks into sheaves tied with binder twine. The reaper and binder was towed by a tractor by the mid 1940s previously teams of draught horses were used to pull the reaper and binder. A photograph taken at the Barrie farm shows three binders the first being towed with a tractor and the others with horse teams. Two workmen were needed to operate the binder when cutting a crop. The sheaves collected on the binder and released onto the ground and were scattered across the paddocks. Using a conventional two pronged pitch fork the harvest hands collected the sheaves and placed each one cut edge on the ground in an upright position and layered with about 15 sheaves into an apex shape to form was is known as a stook. The shape of the stook allowed for drying and draining of water if rain had occurred. Prior to the invention of the mechanical hayfork this was a laborious task requiring each sheaf to be pitched onto a tray truck and moved to the location of the haystack. The mechanised HAYFORK was operated by one person on tractor greatly reducing the need for gangs of labourers. At harvest time farmers had relied on itinerant teams of workers descending on the district looking for work. The three Barrie brothers on their adjoining farms combined forces to cut their crop at its optimum time while the weather was in their favour. Up to many 20 workers at times formed a team in earlier times. Agricultural university students were also keen to gain practical experience in the field. Each of the brothers had a particular skill, and Tom Barrie was the expert on stack building. The district haystacks had a distinctive shape and could be recognised by their builder. Bill Gillespie’s first operational HAY FORK consisted of a large 13 pronged fork situated forward of the truck cabin. It was attached with iron girders and mounted on the rear of the cabin to the tray of his British Bedford truck. It was constructed in metal and iron and welded in the farmers work sheds. The mechanism was raised and lowered by the driver scooping along the ground to pick up a complete stook to raise high enough to deposit all the sheaves in one stook onto the stack or truck tray. The fork section was released by a rope and operated by the driver in the cabin. This model was trialled on the Barrie farm at Ferris Lane. It proved to be very successful and the Barrie/ Gillespie brothers went on to develop a HAYFORK which attached to a tractor and was operated with a series of levers and was raised and lowered hydraulically. It was detached from the tractor when stacking was completed. In its early days farmers travelling along the Western Highway called at the Barrie farm at Ferris Lane to inspect its construction and operation of the invention. It became a widely adopted by farmers throughout the State. It was being used on Wattie Palmer’s farm on Bridge Road Melton South in 1997. Farming in Melton, hay growing and stack building. agriculture, local identities -
Whitehorse Historical Society Inc.
Photograph, Patrick Joseph Davin
Patrick Joseph Davin established the Mitcham Model Dairy in 1926. It operated on two sites on Mitcham Rd. The milk came from farms in Lilydale and Coldstream and was renowned for its richness. In time Jack, Bill and Tim Davin came into the business. the Davin family sold out to Model Dairies in 1956.Black and white photograph of Patrick Joseph Davin in a suit and tie.davin patrick joseph, dairies, dairying -
Whitehorse Historical Society Inc.
Vehicle - Superphosphate Spreader
Endgate seeders consisted of a hopper, feeding device, (early models had only one distributor - later models had two. Could sow seed up to 50 feet, however not very accurate due to wind aggravation. This type of seeder arrived in Australia from America and was soon manufactured in South Australia and Victoria.Flat tray,(wooden) two wheeled vehicle with spreader mounted at rear. It was pulled by a farm tractor. Spreader appears to be operated by mechanical (chain gearing) means. Also used for sowing grass & clover seed.F16A moulded into the spreader support.rural industry, orcharding -
Wodonga & District Historical Society Inc
Machine - Lister Cream Separator, R.A. Lister & Co. Ltd, c1910
A separator is a centrifugal device that separates milk into cream and skimmed milk. Separation was commonly performed on farms in the past. Most farmers milked a few cows, usually by hand, and separated milk with a hand operated machine for domestic use. The milk was poured into the bowl on the top and the handle had to then be turned fast enough to get the separator up to speed adequate to separate the cream and the milk. The milk would come out of one spigot and the cream out of the other. In general practice some of the skimmed milk was consumed by the family, while the rest may have been used to feed calves and pigs. Enough cream was saved to make butter, and the excess was sold. In many cases excess could be bartered or swapped with neighbours for other items of produce. LISTER - A prominent make of separator which became very popular with the dairy farmer, was the "Lister" separator. The early separators sold by R. A. Lister in the 1880's, were made by "Koefoed & Hauberg", Copenhagen. Denmark, called the "Alexandria". Ashton Lister became the sole agent for Koefoed & Hauberg made separators in England and all the English Colonies, throughout the world. Being an enterprising salesman, Ashton, sent his son Edward on a three-year sales tour of Australia & New Zealand in 1890, (hence the strong presence of Lister in Australia.) Initially, the separator was totally manufactured in Denmark and assembled in Dursley, England. By 1892 Lister were making parts at their Victorian Iron Works, and around about the early 1900's, Lister began manufacturing separators in their own right, severing ties with Koefoed & Hauberg. The Lister firm is still going today, under the name of Lister Petter, England, but do not manufacture separators, as the manufacture of farm / domestic separators ceased in the early 1960's.This item is significant as it is representative of domestic and dairying machinery used throughout rural areas of Australia in the early to mid 20th century.The separator is made in 3 sections. The base is metal plated with blue enamel. The vat is made from silver painted tin. There are 2 outlet spouts. The detachable handle, made from cast iron and wood, is held in place by a screw. A metal plate featuring the manufacturer information is attached to the side of the handle. Model CR 15 hand operated table version.On metal plate attached to handle" Lister/ MADE BY R. A. LISTER & Co.LTD. / AT DURSLEY ENGLAND / VICTORIAN AGENTS / GIPPSLAND & NORTHERN CO-OP/ CO. LTD. / MELBOURNE C.1"dairying industry, dairy machinery, milk separators, lister separators -
Puffing Billy Railway
N Model Fordson Tractor, 1930s
... on the Model N. Historic - Farm Machinery - Tractor puffing billy ...Fordson Henry Ford set up the company Ford and Son in 1917, it later became known as Fordson. Henry had previously tried to interest the directors of the Ford Motor Co in producing agricultural machinery, but when this met with no success he set up the new company to market the tractor he had created. Fordson: Model N 1929-32 Produced at Cork 1932-1945 Produced at Dagenham The Fordson Model N replaced the Fordson Model F. Production of the Model N started in Cork in 1929. Production of the Fordson Model N was transferred from Cork to Dagenham in 1932. The Model N featured a 27 HP engine, standard rear fenders (mudguards), a higher voltage ignition system, and optional pneumatic tires. In 1935 power take-off (PTO) was available as an option on the Model N. Historic - Farm Machinery - TractorSteel Tractor - Orange with black wheels.Fordsonpuffing billy, fordson, tractor -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, Lakes Post Newspaper, 1/09/1991 12:00:00 AM
Black and white photograph of pioneer craft models made by Bob Hodgson to demonstrate early building techniques to go to Melbourne Showground Exhibition Farm Lakes Entrance Victoriaarts, businesses, people -
Whitehorse Historical Society Inc.
Mixed media - Doll House, Yvonne Fitzmaurice, Doll House Dining Room, 1976-1978
Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house. house, dolls -
Whitehorse Historical Society Inc.
Mixed media - Doll House, Yvonne Fitzmaurice, Doll House Front Bedroom, 1974
Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.house, dolls -
Whitehorse Historical Society Inc.
Mixed media - Doll House, Yvonne Fitzmaurice, Doll House Bathroom, 1974
Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.house, dolls -
Whitehorse Historical Society Inc.
Mixed media - Doll House, Yvonne Fitzmaurice, Doll House Kitchen, 1974
Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house. -
Whitehorse Historical Society Inc.
Mixed media - Doll House, Yvonne Fitzmaurice, Doll House Veranda, 1974
Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house."Susan Fitzmaurice" name on front of building. Date on plaque on top of front wall. Contents: - flower box with flowers, wooden swing, door mat. -
Whitehorse Historical Society Inc.
Mixed media - Doll House, Yvonne Fitzmaurice, Doll House Attic Nursery, 1974
Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. "Susan Fitzmaurice" name on front of building. Date on plaque on top of front wall.house, dolls -
Whitehorse Historical Society Inc.
Mixed media - Doll House, Yvonne Fitzmaurice, Doll House Sitting Room, 1976 - 1978
Handmade and imported furniture for doll's house made by Yvonne Fitzmaurice for the daughter, Susan, on her birthday.Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. Catalogued books, manuals, repair kits etc used when building the house.house, dolls, tongue depressors -
Whitehorse Historical Society Inc.
Leisure object - Dolls House, Yvonne Fitzmaurice, 1974
THE DOLL HOUSE _ Yvonne Fitzmaurice The ten room fully furnished American farmhouse was created from an idea by former Mitcham resident, Yvonne Fitzmaurice and was constructed between 1976 and 1978 as a birthday present for her daughter, Susan. The house is a unique interpretation of early American architecture and inferior design. It is also a representation of one woman's ability to create and complete a details snapshot of a lifestyle long gone and give pleasure to family, friends and now the community. Yvonne has had an interesting and full life, born in New Zealand where was a State Registered Nurse and she specialised in hospital theatre work. Later her curiosity bought her to Australia where she worked at the Sydney hospital and with the Australia Flying Doctors service flying in and out of Wilcannia, western New South Wales. On returning to New Zealand Yvonne acted as part of a Medical cover team for the different armed services. one session in the Nary involved pursuing submarines which she described as being very exciting. In 1958 she travelled by sea through the Suez Canal to England and as a member of British Services served in the post WWII Germany for three year in the QARANC and also worked at The London Clinic with some high-profile specialists. Yvonne was introduced to her husband-to-be at a tennis party and they lived in Cambridge, UK, where their two children, Alastair and Susan, were born. On coming to Australia in 1965 as "£10 poms" (Yvonne's words) she worked in casualty at the Box Hill hospital. Initially the family lived at Blackburn South before moving to Mitcham in 1968. To help establish a new life with her family in Australia, Yvonne worked in many different positions from nursing, machine knitting for a Prahran shop, making Christmas Cards and as a commercial traveller. As a hobby she also sold a number of pastel paintings. Following the publishing of her first family history in 1994, Yvonne became a member and volunteer at the Whitehorse Historical Society where she has contributed in producing local history publication, articles for the Newsletter and has improved access to the files by creating the detailed "green files". Her interests include art, crafts and writing. Yvonne has a great philosophy, 'each day I must achieve something - no matter how small'.Hand-made child's doll's house. Built by Mrs Yvonne Fitzmaurice and finished in 1979. This house was built as a 1:12 scale and is a model of a Californian house called Peppercorn farm. House was built by Yvonne and her family and took a period of three years. A lot of the furniture is handmade and the rest is collected from various shops. "Susan Fitzmaurice" name on front of building. Date on plaque on top of front wall.na5059, na5061, na5063, na5065, na5068, na5071, na5073, na5075, na5077, na5079, na5081, na5083